Muse is not publishing to my domain name, instead its publishing to business catalyst

I have several sites that are up and running a long time now with no trouble. Today i had to sign into muse and it said my trial had begun.
I signed out and back in again and now it will only let me publish to a businesscatalyst temp site
Eugene

I deactivated muse and reactivated and although i have right Adobe id and password its offering me a free trial of Muse

Similar Messages

  • Exchange 2013 wildcard certificate - problem IMAP POP Because the matter is not a fully qualified domain name

    Hi all, I have an Exchange 2013 SP1, I have installed a third-party SSL certificate and correctly on the server, but when I assign the POP and IMAP services, I see this error
    The certificate with thumbprint XXXXXXXXX and subject '*. Xxxx.yyy' can not be used for POP SSL / TLS connections because the matter is not a fully qualified domain name (FQDN). Use the Set-POPSettings X509CertificateName command to set the FQDN of the service.
    I tried to run this command and restart the POP and IMAP services
    ImapSettings set-ca-server-1-X509CertificateName mail.xxxxx.yyy
    POPSettings set-ca-server-1-X509CertificateName mail.xxxxx.yyy
    But the POP and IMAP services, the certificate is not assigned.
    You know as you can solve
    regards
    Microsoft Certified IT Professional Server Administrator

    Hi,
    Before we go further, I’d like to confirm if you can use POP and IMAP properly.
    If everything goes well, we can safely ignore it:
    http://www.hsuconsulting.com/wildcard-ssl-certificate-exchange-2013-imap-and-pop-error/
    If not, we can try the following commands :
    Set-POPSettings -ExternalConnectionSetting {mail.domain.com:995:SSL}
    Set-ImapSettings -ExternalConnectionSetting {mail.domain.com:993:SSL}
    http://careexchange.in/how-to-enable-and-configure-pop-imap-in-exchange-2013/
    Note: Microsoft is providing the above information as convenience to you. The sites are not controlled by Microsoft. Microsoft cannot make any representations regarding the quality, safety, or suitability of any software or information
    found there. Please make sure that you completely understand the risk before retrieving any suggestions from the above link.
    If you have any question, please feel free to let me know.
    Thanks,
    Angela Shi
    TechNet Community Support

  • What is the point in this "BScatalyst" if can not use your own domain name?!

    the marketing of adobe BScatalyst is a enigma for me. What is it? when you can´t use your domain name?!

    I think you need to do a lot of research and a lot of reading.
    The point is: adobe has NOTHING TO OFFER besides the software (muse) for
    developing a site.
    Sorry to repeat this a lot but your not correct here as well.
    Muse came recently and is a simple tool to help get people into making sites from the graphics and design industry basically. BC Has a full template, layout and code system:
    http://docs.businesscatalyst.com/dev-assets/reference#!/module-reference/photo-galleries/m odule_photogallery.html
    It has API Access, it can be developed using any coding software from Dreamweaver to Coda 2. This for many is the primary method of creating BC websites and has been for years, even before Adobe purchased the BC company.
    It is always being updated as you can see with the new rendering engine and liquid markup:
    http://www.businesscatalyst.com/bc-blog
    The point is the CC atracts amatures, like my self, to devope sites, but
    they have NOTHING to offer on the hosting side of the work.
    Sorry, but none of this is correct. CC is a service created by Adobe to take all its software into the cloud, it is not just there to develop sites. In terms of storing your work in the cloud that is one of its primary functions. Ignoring BC and websites you can store your files, PSD's through your Creative Cloud account.
    Your post was put under moderation automatically by the forum software because how you posted it. The caps will do it.
    everything above here are without ANY interest for the common amateur muse developer. Why do you think we use muse?!
    I communicate, I read and know a lot of Muse developers, Again your not correct here as well. Sorry for repeating this but this again simply not true and pretty much everything you have said so far is that.
    A lot of Muse users develop very nice looking but basic in function websites, there are a lot who would like to do more such as eCommerce etc, you are not the norm in your thinking off what everything is from CC, BC and the web.
    CMS me here, SAAS me there, and business analysis me over again. IT IS OF NO INTEREST FOR US MILLIONS OF MUSE USERS!
    Again, this is not true. Most of the posts I see from Muse users is how they do more with BC and many want and ask how to upgrade their CC BC to offer more features. The Creative Cloud version of BC is the VERY BASIC version of it, it does not have most of the abilities it has if you have one of the higher plans.
    See here:
    US Yearly Pricing | Adobe Business Catalyst
    A complementary product to Muse is HOSTING!
    Creative Cloud is Adobe moving into the Cloud space for their products and services, Muse is an entry level designer based peace of software to create basic websites. Business Catalayst is what you do not want to research into and hosting is just storage basically.
    Adobe Business Catalyst
    In terms of your website, people make sites just for family etc and put them on the web, Real domain or not you can build a site for what ever you want. But its a website and will be out there on the web. Search engines like google will index such sites so if you do not want them out there on the internet do not create them to make them available.
    I do not mean to be rude, but your comments are not valid and going no where. You not really understanding what anything is, your complaining about things are not true or things that you think do not exist when they do.
    I have been developing sites on the Business Catalyst platform for over 5 years and using other coding platforms and other CMS's for longer then that. I am considered one of the people outside BC who know the platform for the most so please trust in what I am saying here.
    If you want just hosting just use Creative Cloud or something like dropbox.
    If you want to learn more about the web or building sites etc I suggest you go lean, there are many great resources out there.

  • IWeb: Won't publish (update) with Domain name

    I have a site that I have used iWeb to create. I recently, got a domain name from www.godaddy.com. I have had it for a few days, and I have had a some things go wrong. First, the web counter that iWeb provides, doesn't work on my site. The counter will publish but it only shows one number (it doesn't go higher). Because it would not work, I decided to delete the counter from my site. Second, I tried to rename one of the pages from "My Podcast" to "Media" but when I try visiting my site, it still says "My Podcast," but when I click on it, a window shows up that says that Apple can't find the sight because it may have been deleted. So, I fixed that by making the page say My Podcast again (which fixed it). Finally, I tried updating some information on my site, and it says that the site published, but when I visit the site, it doesn't have anything that is changed at all.
    I can't figure out what is wrong and I need some help. Thanks!

    With rapidly reloaded pages, sometimes the browser will show you information from its cache in order to deliver the information to you as fast as possible. Unfortunately, with frequently updated pages, this browser caching strategy doesn't work so well.
    To make sure that you are seeing the most up-to-date version of your website, try emptying your browser cache. In Safari, look under the Safari menu and select "Empty Cache". You can also try to add a "?" after your URL to tell Safari to ignore whatever is in its cache.
    I have just checked your website and all the links look to be functional. So I am 100% sure that it is a caching issue for you.
    As far as the iWeb hit counter goes, you are using domain forwarding with masking to hide the .Mac address. This masking feature prevents the hit counter from displaying correctly or at all. Disable masking and you will see your hit counter as normal. Even if it is not displayed, it will still be counting.

  • Azure AD user name not using configured custom domain name

    I have configured a few users for Lync Online that I setup before I had custom domain name work with Azure AD.  Now I have the custom domain setup and verified and configured as the primary domain.  The users that were configured for Lync
    Online are still displayed with the *.onmicrosoft.com username in Azure AD.
    Is there a way I can change these users so their usernames use our custom domain?

    You can easily change the UPN via PowerShell:
    Set-MsolUserPrincipalName -UserPrincipalName [email protected] -NewUserPrincipalName [email protected]
    If you want to do this in bulk for all users, you can use something like this:
    $all = Get-MsolUser -All
    $users = $all | ? {$_.UserPrincipalName -match "tenant.onmicrosoft.com"}
    $users | % {Set-MsolUserPrincipalName -UserPrincipalName $_.UserPrincipalName -NewUserPrincipalName $_.UserPrincipalName.Replace("tenant.onmicrosoft.com","domain.com")}
    Test it first against a single user of course :)

  • AVS 3120 not resolving hostnames without domain name

    Dear friends,
    Why could be this happenning? My domain name servers are configured inside the box and are up and functional. Inside AVS, I can ping to "server.domain.com", but when I ping only to "server", the answer I get is "unknown host: server". What shall be done to solve this?
    Cheers!

    This can be caused by wrong mapping which can lead to wrong destination or incorrect VIP which having a set of url policies that are misdirecting

  • IWeb iWebSites. Aussie Domain Names.  Search Engines and Business

    Hi Everyone,
    I am starting a business in Australia. I'm experimenting with my iWeb sites. I can publish and URL forward to seperate sites on my iDisk. I'm working with iWebSites and have just discovered iWeb SEO Tool, but not tried it yet.
    I have several .net.au domain names which can be url forwarded to my web pages on iDisc.
    At present I'm having no luck with my domain names showing up on Google Searches. I'm experimentig with Google Webmaster tools. Further suggestios would be appreciated.
    I read on a recent post that .Mac (.ME) iWeb was maybe not the best for business.
    As I live in Australia, would I benefit from having my web pages on Australiam servers? OR Can I solve the issues and continue with my .Mac (.ME) subscription and save extra expense?
    Thanks in anticipation for assistance.
    SoulSearcher

    It is always beneficial to have a website with a domain that is local to the market you serve. However, once you have created your XML sitemap and submitted to Google Webmaster Tools you can tell Google that your website is geared towards the Australian market.
    Google has confirmed that this is just as beneficial as having a local domain name for your country.
    However I do recommend you get a proper host and an Australian domain name for the best results. You can pay as little as $60.00/year for everything. These are the reasons;
    1) If you plan on doing this later on it is always better to have a domain name with a longer history
    2) You have a better chance of ranking higher if you have your own domain name with your company's name in it, or your targeted keywords, than if you use a me.com address
    3) If you build up incoming links and then decide to switch to a domain name you will lose all of your link popularity that you have built up. The more people who link to your site, the better chance of ranking high for your keywords.

  • Change Domain Name and its effects

    Hello
    We have a local domain name contoso.com with 20 PC Clients on the domain (server 2008 R2) . We want to change the domain name to cont.com. Is that possible ? If so, then should I re-enter all the 20 clients to the new domain ?
    Also, would changing the domain name affect the exchange server (exchange 2007)  ?
    Thank you.

    Hi,
    A domain rename of a forest containing Exchange 2007 servers are not supported.
    Checkout the below thread on similar discussion,
    http://social.technet.microsoft.com/Forums/windowsserver/en-US/d7cd95ec-79fc-4821-bfad-cd014d4f5f7e/ad-domain-rename-exchange-2007-is-present?forum=winserverDS
    Regards,
    Gopi
    www.jijitechnologies.com

  • Web Sharing - name uses weird domain name instead of IP

    Just bought a new MacBook Pro and transferred my account info from my other MacBook Pro. When I go to Web Sharing to click on the link to go to my website on my local drive I get someonesname.companyname.net/~myname.
    I need it to be the IP address.
    The domain name someonesname.companyname.net shows up in the Networks Netbios setting as well.
    I had to fix this on the last MacBook Pro, but that was two years ago and can't remember what I did to fix.
    HELLLLPPPPPPP!

    Just bought a new MacBook Pro and transferred my account info from my other MacBook Pro. When I go to Web Sharing to click on the link to go to my website on my local drive I get someonesname.companyname.net/~myname.
    I need it to be the IP address.
    The domain name someonesname.companyname.net shows up in the Networks Netbios setting as well.
    I had to fix this on the last MacBook Pro, but that was two years ago and can't remember what I did to fix.
    HELLLLPPPPPPP!

  • Using domain name instead of ip address

    I have a tomcat server installed on machine1(server). I can access this server from other computer on intranet using http://ipAddressOfServer/. Now, I want to access the server using a domain name, for example http://domainName.com. Can we do that in Tomcat or does it require to install any third party software.

    You can associate a Virtual Host to the loopback IP address 127.0.0.1 read about Virtual Hosts here: http://tomcat.apache.org/tomcat-6.0-doc/virtual-hosting-howto.html
    But with the above configuration alone you can access your app via http://somedomainname.com only on your local machine, no one else on the internet will see it.

  • Domain Name instead of IP Address

    Hello,
    When I run a JSP page from Jdeveloper, by default it is taking the IP address, how can I set this to take my computer domain name?
    Thanks

    Yup... you can do it from Embeded OC4J Server Pref available from Tools menu
    In this screen the select Global -> Startup, there you should be able to choose what you want to use. If you want to use custom value apart from IP/ Hostname liek 'localhost', you can do that also.
    This works in 10g, but there should be similar setting in earlier version of jDeveloper as well.
    regards - rutwik

  • Can I design something in Muse and somehow get the HTML text fro it to plug into Business Catalyst to make a newsletter?

    I guess since I don't know html, I was wondering if I could create a "page" in muse and somehow get the "HTML" text from it so I can plug that text into a Business Catalyst E-Mail Marketing Campaign template. since I am struggling so much with modifying one of Business Catalysts established templates.
    I made my website with muse and I host it through Business Catalyst with a webMarketing Plan.
    Thanks in advance,

    There is no direct way to achieve this but you may try a workaround which may work but would require testing on your end.
    Create the site in Muse and publish to BC , master page will be included in template section. So in your published site , Page template will show you design from Muse.
    Now from Partner portal , you can select the site to create email campaign template but please note that creating a template from PP will remove the default email campaign templates on BC end.
    After creating the campaign template from PP , login to your site and create email campaign and in template section you will get the option to select the template which you created from PP.
    Not an ideal way but can be used as a workaround.
    Thanks,
    Sanjit

  • Is it possible to publish to personal domain name and publish blog to .mac?

    I just finished publishing my website to a personal domain via iweb and .mac. Now I want to create a blog to post to .mac. Is this possible or will it automatically publish to my personal domain? I really don't want to mix business (website) with pleasure (blog). Thanks to all who post.

    Create a separate site and put the blog page in it. You can make it easy to make two separate domain files, one for each site, and manage them with iWebSites or Multisite for iWeb. That will keep your personal site separate form your business one. Each will have a separate URL. The personal one will be http://web.mac.com/your .Mac account name/the site name/the site name.html (or index.html).
    I use iWebSites to manage multiple sites.. It lets me create multiple sites and multiple domain files.
    This lets me edit several sites and only republish the one I want.
    OT

  • Domain name error

    I'm trying to add a domain name to one of my Business Catalyst sites. I keep getting the same error message -- that the url I want to us is already in use. Previously, I was using the url for another Business Catalyst site. I thought I had deleted it. However, I tried to check and I can no longer access the admin site. When I sign in, I'm redirected to a godaddy.com page with the url that I'm trying to use. Frustrating. Please advise on how I can delete the old Business Catalyst site and any previous instances of the url I'm trying use. Thank you!

    Hi,
    I would recommend reaching our live chat or submitting a case with the following details. 
    - domain name
    - site url that the domain used to previously been on
    You can access our help channels within the admin panel -> help & support.  Or you can go directly here -> http://helpx.adobe.com/contact.html (Select Business Catalyst and proceed to the following options)
    This will help us resolve your issue immediately. 
    Kind regards,
    -Sidney

  • Iweb was not publishing changes to my personal domain name, AND now it won't let me publish at all!

    Hi, i am new to the apple community so bare with me whilst i struggle to explain...
    I recently purchased a hosting site through netregistry.net.  www.toyboxtherapies.com.au I spoke to them to allow the changes to the CNAME through their site.They did this for me. Once they did this my original 3 page site that I had published to mobileme came up. 
    When i added changes to the site, none of them were published even though iweb said they had been. I gave the site 48 hours (well, i gave them a week) to update the changes.
    I went to double check today and now iweb wont let me publish to my domain name at all, it just lists File>Set up personal domain on mobile me.
    When I log into mobile me my domain name is there. I have tried removing t and setting it up again, but nothing is happening with iweeb. Still the same problem.
    Please help! I am trying to get this business off the ground and its all very frustrating!

    This is what I see in a Lookup :
    ; <<>> DiG 9.6-ESV-R4-P3 <<>> www.toyboxtherapies.com.au cname +multiline +nocomments +nocmd +noquestion +nostats +search
    ;; global options: +cmd
    www.toyboxtherapies.com.au. 3600 IN CNAME web.me.com.
    It means that the CNAME record points to MobileMe.
    So go where you manage your domain and delete the CNAME record and change the  A-record(s) to point to your new webhost.
    It takes some time for the changes to propagate thru the internet. A minimum of 20 minutes.
    Note that when you publish to MobileMe, iWeb recieves the domainname information from the MobileMe server. Only when you publish elsewhere you have to enter the domainname. But if you do not change the settings where you host your domainname, it still directs to MMe. But that's beyond iWeb.

Maybe you are looking for