Muse isn't saving changes locally and constant request to merge files

I have had this problem occur now several times and it getting to a   point that MUSE is not saving me time but actually wasting hours of my   time.
Here is online version : http://cervia01.businesscatalyst.com/
On for example these pages I added a green background to the title of the page which is online. However offline on my pc the file is now present as if I had made no changes to the file at all!
http://cervia01.businesscatalyst.com/ligging.html
http://cervia01.businesscatalyst.com/vervoer.html
Now I need that online version to download back to my pc otherwise I will end up having to redo hours of work.
How do I do that?
Also, when I open this site Muse prompts to merge changes...'this site has been changed, do you want to merge the changes?' If I say yes it finds two or three very old changes (such as small text errors) and so I merge them, but again and again and it makes no differnce, Muse always comes up with these same errors.
However end all, it doesnt always save correctly so how can I clean up this mess?
Thanks, Elisabeth

You cannot make arbitrary edits to your online site and have them pulled back into Muse. The only edits that are supported are those enabled by the Business Catalyst In-Browser Editing UI (which enables simple text edits and image replacement, no formatting changes). All layout and formatting changes must be done in Muse.
Here's a tutorial on using In-Browser Editing: http://helpx.adobe.com/muse/tutorials/in-browser-editing-muse-part-1.html

Similar Messages

  • Upgraded to Acrobat Prp 9 and Windows 7, and I can't merge files anymore.

    Hi, Upgraded to Acrobat Pro 9 and Windows 7, and I can't merge files anymore.  Acrobat Pro tries to save each file individually before it tries to combine the files.  I actually get an error message with PDF files that are in my list of files to merge.  Please help!

    Did you do the updates to Acrobat? Now at 9.5.5.

  • Errors when saving contacts locally and syncing them between MacBook and iCloud

    Last night I detected that the synchronisation of contacts between my MacBookPro (Yosemite, 13" Retina, late 2013) and iCloud is no longer working. Sync between iCloud and iOS devices (with iOS 8.1) works fine.
    The problem effects the exchange of information from MBP to iCloud as well as the other way around. However, the issues are slightly different.
    No matter what changes (changing existing contacts, creating new ones or creating/changing groups) I do directly in iCloud (which I usually don't do – I was just testing), none of them get synced to my MBP (though they do sync to all iOS devices).
    If I do work on my MBP the situation is a bit different:
    If I change any existing contact, those changes are not synced.
    If I create a new contact in the "all contacts" group, it syncs to iCloud. If I make changes to that newly created contact, they are again not synced.
    If I create a new contact in any other group, the contact does not sync.
    If I create a new group, that group is displayed in iCloud as "new group", i.e. the name I gave it is lost on the way... If I add contacts to this group (again on the MPB), they do not sync.
    If I create a new group using the option "create group from selected contacts" those contacts are synced to iCloud but the name of the group is again only "new group". Contacts added later to that group also don't sync.
    Worst of all, everything that does not sync to iCloud, is lost once I close the Contacts app, meaning this information is not even stored on my MPB. OS X does not display any error messages. However, looking into the console, I found this message repeatedly whenever I was making changes to contacts etc (not only upon closing the app):
    21.10.14 17:12:46,786 Contacts[532]: Error saving address book: Error Domain=NSCocoaErrorDomain Code=1560 "Bei der Überprüfung sind mehrere Fehler aufgetreten." [TRANSLATION: "Multiple errors occurred during verification"] UserInfo=0x600002e75500 {NSDetailedErrors=(
        "Error Domain=NSCocoaErrorDomain Code=1570 \"originalLine ist ein erforderlicher Wert.\" [TRANSLATION: "originalLine is a required value"] UserInfo=0x600003072180 {NSValidationErrorKey=originalLine, NSLocalizedDescription=originalLine ist ein erforderlicher Wert., [TRANSLATION: NSLocalizedDescription=originalLine is a required value.] NSValidationErrorObject=<NSManagedObject: 0x600000ab6ec0> (entity: ABCDUnknownProperty; id: 0x60000102b9e0 <x-coredata:///ABCDUnknownProperty/tFFBA3874-332E-45E1-AD9D-C743B61BD9148226> ; data: {\n    originalLine = nil;\n    owner = \"0x56b4002ab <x-coredata://606A6059-A9DE-42A2-91C2-BBCDADB20C77/ABCDContact/p5549>\";\n    propertyName = \"X-MS-OL-DESIGN\";\n})}",
        "Error Domain=NSCocoaErrorDomain Code=1570 \"originalLine ist ein erforderlicher Wert.\" [TRANSLATION: "originalLine is a required value"] UserInfo=0x600003462f40 {NSValidationErrorKey=originalLine, NSLocalizedDescription=originalLine ist ein erforderlicher Wert., [TRANSLATION: NSLocalizedDescription=originalLine is a required value.] NSValidationErrorObject=<NSManagedObject: 0x6000006bede0> (entity: ABCDUnknownProperty; id: 0x600000c3d300 <x-coredata:///ABCDUnknownProperty/tFFBA3874-332E-45E1-AD9D-C743B61BD9148152> ; data: {\n    originalLine = nil;\n    owner = \"0x56a0002ab <x-coredata://606A6059-A9DE-42A2-91C2-BBCDADB20C77/ABCDContact/p5544>\";\n    propertyName = \"X-MS-OL-DESIGN\";\n})}"
    21.10.14 17:12:46,788 Contacts[532]: -[ABAddressBook save] failed. (<ABAddressBook: 0x6080020c4130>)
    21.10.14 17:12:46,788 Contacts[532]: [CardDAVPlugin-ERROR] -doSyncWithServer: [syncAddressBook(<ABAddressBook: 0x6080020c4130>) save] FAILED
    Does anyone have an idea how to fix this?
    I am not sure about the relevance of these error messages but I found them as well in the console:
    21.10.14 17:46:36,619 uxipm_ui[745]: WARNING: The Gestalt selector gestaltSystemVersion is returning 10.9.0 instead of 10.10.0. Use NSProcessInfo's operatingSystemVersion property to get correct system version number.
    Call location:
    21.10.14 17:46:36,619 uxipm_ui[745]: 0   CarbonCore                          0x00007fff934f2dc3 ___Gestalt_SystemVersion_block_invoke + 113
    21.10.14 17:46:36,620 uxipm_ui[745]: 1   libdispatch.dylib                   0x00007fff92302c13 _dispatch_client_callout + 8
    21.10.14 17:46:36,620 uxipm_ui[745]: 2   libdispatch.dylib                   0x00007fff92302b26 dispatch_once_f + 117
    21.10.14 17:46:36,620 uxipm_ui[745]: 3   CarbonCore                          0x00007fff9349b4da _Gestalt_SystemVersion + 987
    21.10.14 17:46:36,620 uxipm_ui[745]: 4   CarbonCore                          0x00007fff9349b0c7 Gestalt + 144
    21.10.14 17:46:36,620 uxipm_ui[745]: 5   QtCore                              0x000000010c089496 _ZN9QInternal16registerCallbackENS_8CallbackEPFbPPvE + 194
    21.10.14 17:46:36,620 uxipm_ui[745]: 6   ???                                 0x00007fff64845ceb 0x0 + 140734879784171
    And also this one:
    21.10.14 17:46:35,098 CoreServicesUIAgent[322]: unexpected message <OS_xpc_error: <error: 0x7fff79579c60> { count = 1, contents =
      "XPCErrorDescription" => <string: 0x7fff79579f70> { length = 18, contents = "Connection invalid" }
    }>
    And this one:
    21.10.14 17:42:42,115 com.apple.iCloudHelper[737]: objc[737]: Class FALogging is implemented in both /System/Library/PrivateFrameworks/FamilyCircle.framework/Versions/A/FamilyCircl e and /System/Library/PrivateFrameworks/FamilyNotification.framework/Versions/A/Famil yNotification. One of the two will be used. Which one is undefined.
    21.10.14 17:42:42,121 com.apple.xpc.launchd[1]: (com.apple.imfoundation.IMRemoteURLConnectionAgent) The _DirtyJetsamMemoryLimit key is not available on this platform.
    I have tried the troubleshooting listed here: Get help using iCloud Contacts (i.e. disabled and reenabled the sycn through iCloud in Preferences > iCloud and checked the login information etc)
    And I also do not exceed any of the limits for contacts listed here: iCloud: Limits for Contacts, Calendars, Reminders, and Bookmarks
    Any help is greatly appreciated!

    I don't know if this is applicable for you, but this solved it for me.
    My initial situation was the following, Ipad, Iphone and iMac where syncing well. But not my Macbook Pro. So I did this Get help using iCloud Contacts - Apple Support and this Sync Services: Advanced troubleshooting for contact and calendar syncing - Apple Support . As result all my contacts, even the view I had where gone on my macbook. I tried rebooting and restartting but nothing helped.
    Then I did the following. I backuped all the cards from contacts on my imac (by moving them into a folder) and backuped them by export as archive.
    Afterwards I disconnected from icloud on my imac, then reconected and deleted all contacts from the addressbook. I double checked if they where gone on icloud.com too. Afterwards I just moved them back from the folder to the address book. again double checked on icloud.com and the my macbook started syncing properly.
    Which of the things I finally solved it, I don't know for sure. But I assume it was the one with deleting and restoring everything on another machine.

  • IPhoto isn't saving changes

    I've recently moved my iPhoto library onto a new (well, different) macbook pro. I can import and edit photos in this iPhoto, but if I quit if and then re-open it none of my recent imports are still there and none of my edits have been kept. Any idea how I can fix this?

    What version of iPhoto? Assuming 08 or later:
    Option 1
    Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild. Choose to Repair Database. If that doesn't help, then try again, this time using Rebuild Database.
    If that fails:
    Option 2
    Download iPhoto Library Manager and use its rebuild function. (In early versions of Library Manager it's the File -> Rebuild command. In later versions it's under the Library menu.)
    This will create an entirely new library. It will then copy (or try to) your photos and all the associated metadata and versions to this new Library, and arrange it as close as it can to what you had in the damaged Library. It does this based on information it finds in the iPhoto sharing mechanism - but that means that things not shared won't be there, so no slideshows, books or calendars, for instance - but it should get all your events, albums and keywords, faces and places back.
    Because this process creates an entirely new library and leaves your old one untouched, it is non-destructive, and if you're not happy with the results you can simply return to your old one.  
    Regards
    TD

  • How can i change date and time after importing a file

    hello
    i'm importing AVI files first in iMovie because Final doesn't support (other question i put in) but when i see the scenes form 1993 they have the date 2004.
    i believe 2004 is the date i put them on the computer.
    Now i looked in the help files Final Cut Pro but cant find anything to adjust the date and time.
    it works well in iMovie using the help files:
    Right-click the clip you wish to edit and click Adjust Clip Date and Time from the menu that appears. Or click on Archive and than adjust date and time
    But as i said i cant import the files in FCP have to import them to  iMovie files adjust the date and than import to Final Cut Pro but than de changes i made to the date and time  are gone and in FCP 2004 is again the date of the file!!!
    Question how can i Change in Final Cut Pro the date and time in a same way as iMovie does?
    Jemajoro

    OK, I think I understand what you are saying but it still does not look like it is doing it as you describe.
    Here is another screen shot.
    Note that all clips in "2007 August" event have the date of Aug x, 2007.
    Yet, the event "2007 August" still shows up under the 2012 "folder" (is that the right terminology?).
    The newest clip in this event is Aug 31, 2007 so shouldn't it be categorized as 2007 and not 2012?
    I think you know this but I am using the following feature:
    Go to the sprocket icon under the events.
    Select "Group events by date" and then by "group events by year and month"
    Thanks again for all the help

  • HT1349 cant change start and stop time on aac file using PC

    I am trying to create a ringtone for my iphone.   So i created a AAC file of the song i wanted as a ringtone.  And I am doin exactly what the videos say.  So when i click Get INfo on the AAC file, it says i am supposed to be able to change the start and stop type. but it doesnt allow me to do so. 

    Set the start/stop where you want. Then right-click on the song in your library and choose "Convert Selection to mp3." This creates a new shorter file, files it by artist/album, and adds it to your library. It will play correctly inside or outside of iTunes.
    After you've confirmed the new one plays OK, you can either keep or delete the longer original, as you wish.
    Note that the above assumes that the source file is unprotected, which is true in your case, since you are starting with an mp3.

  • Cannot change date and time settings, popup "These files can't be opened: Your internet security settings prevented..."

    When I try to change my date and time settings I get a Windows Security popup that reads: "These files can't be opened.  Your Internet security settings prevented one or more files from being opened. C:\Windows\system32\rundll32.exe"
    I have Windows 7 64 bit.  I also have McAfee SecurityCenter installed.  I have tried turning off my firewall temporarily, but the problem persists.  I am not sure if it is some type of virus.  If anyone could give me some information
    as to what could be causing this I would appreciate it.  Thanks in advance.

    Hi,
    Perhaps, this issue is caused by a sign of corruption.
    Please try to use sfc/scannow to check the System Files.
    Also, You may refer to the following link.
    http://www.sevenforums.com/general-discussion/71526-cant-change-date-time-2.html 
    Important Note: Microsoft provides third-party contact information to help you find technical support. This contact information may change without notice. Microsoft does not guarantee the accuracy of this third-party contact information.
    Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread. ”

  • What is the best method for controlling a data switch of 20x20 ports, with local and remote requests?

    I'm using booleon control boxes for 'source' ports - to be connected to 'customers' ports. Am not sure of choosing between arrays, clusters, case, etc.

    Thanks, however, I simply meant my boolean 'ports' to mean a 'yes/no' control box of a 'data source', which, when selected, would signify a 'source' that could then be connected to a 'customer' port or 'receiving box'. Perhaps instead of port, I should have said input/output box.
    My main question is simply about a data switch matrix of 20 inputs and 20 outputs. Should I attempt to manage the switching of data lines via cases, for loops, sequence, or what! I believe I will need to set up arrays, but controlling the matrix is ???. Thanks.

  • How do I get rid of this login keychain and constant request for email and smpt passwords.I have clicked on remember this each time?

    my imac was supposed to be set up w/o a password. This was done in store.  Periodically ,much to frequently, I get popup boxes requestiong email password and smpt password and login keychain.  How do I get rid uf this?

    See:
    * [http://kb.mozillazine.org/Menu_differences Firefox > Preferences] > Security: Passwords: [ ] "Remember passwords for sites"
    * http://kb.mozillazine.org/Password_Manager

  • Firefox isn't saving my tabs

    I need to start off with the warning that I have no clue what I'm doing and the work I've done so far was based on other people's advice or information I found on MozillaZine. This problem started after I downloaded the latest version of Firefox.
    So... Firefox isn't saving my tabs and I think I know why, but I'm not 100% sure. (I have it saved that I want to restore my previous session whenever I open Firefox.) I went to about:config and went to look for browser.sessionstore.enabled to see if that was messed up, but the file wasn't even there. Obviously, I'm assuming that's the problem. If anyone could tell me if it sounds like I'm on the right track that would be great.

    The pref [http://kb.mozillazine.org/browser.sessionstore.enabled browser.sessionstore.enabled] is no longer used in Firefox 3.5 and later (bug 449596).
    Remove that pref if you still have it via the right-click context menu and choose Reset.
    Check that Session Restore is enabled.
    You can look at the 'browser.sessionstore' prefs on the '''about:config''' page and reset prefs that show as bold (user set).
    http://kb.mozillazine.org/browser.sessionstore.max_tabs_undo
    http://kb.mozillazine.org/browser.sessionstore.max_windows_undo
    http://kb.mozillazine.org/browser.sessionstore.resume_from_crash
    If you use [[Clear Recent History]] in Firefox 3.5/6 or [[Clearing private data|Clear Private Data]] in Firefox 3 to clear the 'Browsing History' when Firefox is closed then restoring tabs from the last session (e.g. "Save & Quit" or "Show my windows and tabs from last time") doesn't work.

  • Locale and Jsp

    Hi again,
    I am new to jsp and would like to hear some expert advice when handling i18n.
    A) How are locales working? I have printed out ${pageContext.response.locale}" and ${pageContext.request.locale}" . Should I work with them when handling localization in an application or is there session object or some other way to do it?
    B) Which is the most elegant way to handle database entries i18n? For example if there is a field DESCRIPTION in a table TASKS, and I would like to show a translation depending on the user's locale. What I have as an idea is to create fields DESCRIPTION_EN, DESCRIPTION_DE, DESCRIPTION_JP... and read the locale from point A) - from page context or better from session and then call the right query and show the passing version. Does this make sense?
    C) As posted earlier the jstl fmt:message works only partly for me. It gets the message from the right bundle but when browser locale is changed it doesn't change to the right bundle. Where could the problem lie?
    Thanks

    IMO any website that tries to automatically i18n based on the locale settings in the request is highly annoying.
    I usually prefer English content because translations suck to my local language, yet I'm almost forced to use a localised operating system because it's very hard to get non-localised versions here.
    Any automatically localised website would present me with a language I don't want, or worse with services I don't want (like Google, which defaults to searching websites in the language it autodetects rather than all sites).

  • Preview 'saving changes' takes forever and then crashes!!!!! What should I do?

    I Have searched everywhere for answers to no avail. If there's no help to make this 'saving changes 'thing to stop when I'm working with pdf can someone suggest another pdf reader as good or better than preview for me? I need one that uses little memory. Adobe reader seems to be very choppy and sluggish for me. I've got 8gb RAM And I use Mac OSXlatest update 10.9 on a brand new MBP retina. Thanks. Other things I've done so far... I have unchecked the iCloud document and files so I don't save anything to iCloud. Somebody help with this. Thanks

    Launch the Console application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
    Step 1
    For this step, the title of the Console window should be All Messages. If it isn't, select
              SYSTEM LOG QUERIES ▹ All Messages
    from the log list on the left. If you don't see that list, select
              View ▹ Show Log List
    from the menu bar at the top of the screen.
    In the top right corner of the Console window, there's a search box labeled Filter. Initially the words "String Matching" are shown in that box. Enter the name of the crashed application or process. For example, if iTunes crashed, you would enter "iTunes" (without the quotes.)
    Each message in the log begins with the date and time when it was entered. Select the messages from the time of the last crash, if any. Copy them to the Clipboard by pressing the key combination command-C. Paste into a reply to this message by pressing command-V.
    ☞ The log contains a vast amount of information, almost all of which is irrelevant to solving any particular problem. When posting a log extract, be selective. A few dozen lines are almost always more than enough.
    Please don't indiscriminately dump thousands of lines from the log into this discussion.
    Please don't post screenshots of log messages—post the text.
    ☞ Some private information, such as your name, may appear in the log. Anonymize before posting.
    Step 2
    In the Console window, select
              DIAGNOSTIC AND USAGE INFORMATION ▹ User Diagnostic Reports
    (not Diagnostic and Usage Messages) from the log list on the left. There is a disclosure triangle to the left of the list item. If the triangle is pointing to the right, click it so that it points down. You'll see a list of crash reports. The name of each report starts with the name of the process, and ends with ".crash". Select the most recent report related to the process in question. The contents of the report will appear on the right. Use copy and paste to post the entire contents—the text, not a screenshot.
    I know the report is long, maybe several hundred lines. Please post all of it anyway.
    If you don't see any reports listed, but you know there was a crash, you may have chosen Diagnostic and Usage Messages from the log list. Choose DIAGNOSTIC AND USAGE INFORMATION instead.
    In the interest of privacy, I suggest that, before posting, you edit out the “Anonymous UUID,” a long string of letters, numbers, and dashes in the header of the report, if it’s present (it may not be.)
    Please don’t post other kinds of diagnostic report—they're very long and rarely helpful.

  • Muse does not seem to save and upload small changes to site pages.  Can you advise?

    Muse does not seem to save and upload small changes to site pages.  I'm saving changel to the pages as I make them. Can you advise?
    Geo.

    Might be a caching issue. Have you tried different browsers or clearing your browser cache?
    Are you hosting on Business Catalyst or a third party hosting service?

  • I tried to update iTunes yesterday.  The update failed.  Now when I try to open iTunes it says that the version isn't localized and needs to be run in English.  It has never been in another language.

    I attempted to update iTunes yesterday.  The update failed.  iTunes now won't open and displays an error message that the program isn't localized and needs to be run in the English version.  I'm in the US and the computer and program has never been used in another language.  I tried reinstalling the full download for the new version and that failed as well.  I logged out; shut down; restarted; retried the update; etc.  Still no luck and the same message.  Thoughts?

    Solving MSVCR80 issue and Windows iTunes install issues.
    Thanks to user turingtest2 for this solution.
    Solving MSVCR80 issue and Windows iTunes install issues.
    If the above doesn’t do the trick entirely, then use the instructions in the following as it applies to the version of Windows you are using:
    HT1925: Removing and Reinstalling iTunes for Windows XP
    HT1923: Removing and reinstalling iTunes for Windows Vista, Windows 7, or Windows 8
    You may be required to boot into safe mode to complete the folder deletion process.

  • When i first created my itunes account it selected the local country i lived in, now i have changed countries and it does allow me to buy any apps as the credit card is not valid in that country. what do i do?

    When i first created my itunes account it selected the local country i lived in, now i have changed countries and it does allow me to buy any apps as the credit card is not valid in that country. what do i do?

    You will need to sign into your account using the iTunes app on your Mac or PC and change the region/country for your account. If you do not have a bank card for the new country, you should be able to make purchases with iTunes Gift Cards if they are available in the new country.

Maybe you are looking for