Muse phone site doesn't display correctly when viewed on mobile device, any advice to fix this?

You can view the website at www.conceptfizz.co.uk , desktop works fine, but phone version doesn't load full screen, only on the left hand side. Thanks

It's definitely loading the mobile version. select everything on the page to check that you haven't left any objects on the right hand side of the page, or that any widgets' bounding areas haven't expanded out too far - this often happens when you move components around.
David

Similar Messages

  • Site doesn't display properly when viewed in Windows 8.1 and IE11

    Web site doesn't display properly when viewed in Windows 8.1 and IE11. Site html and css validates no errors at W3C. Any ideas?

    The following is what I see in IE11 on a Windows 8.1 system, no difference using Firefox, Chrome or Safari on the same system.

  • HT201317 When I view photos on my devices some are not oriented correctly. I used Picassa to turn all photos upright and then copied those photos into the upload file but they are still not corrected when viewed on my devices (ipads)

    When I view photos on my devices some are not oriented correctly. I used Picassa to turn all photos upright and then copied those photos into the upload file but they are still not corrected when viewed on my devices (ipads)

    Generally I would not use Facebook for sharing any photos, it compresses the photos substantially, and when you have shadows and dark colours you get visible "bands" where there should be subtle gradients, ie at sunsets and sunrises.
    It sounds like you are using two methods to upload to Facebook:
    1. Sharing from within Aperture, which basically syncs Facebook with your Aperture album, so any changes made at either end gets synced, hence the deletions from Albums, although the original file should still be in your library, just removed rom the album. It is like a playlist in iTunes.
    2. Exporting pics and uploading to Facebook from the browser.
    I am not sure how method 1 gets compressed, but I know that uploading hi-res jpegs to Facebook using method 2 results in poor quality images.
    I wouldn't even bother comparing option 1 or 2, and they will both be poor images once you view them on Facebook, as opposed to viewing uploaded images on proper image sharing / hosting sites.
    Your problem is not with Aperture, it is using Facebook for showing your work.
    If you export pics form Aperture at high res jpegs or TIFFs your images will be fine.
    If you insist to use Facebook as your way to share your work, then your workflow should be this:
    1. Right click images you want to share.
    2. Select Export version.
    3. Export as 100% size and ensure the export settings are set at 100% quality.
    4. Upload this pic into Facebook.
    This will get you the best image size and resolution on Facebook.
    See how you go.

  • Have downloaded both Adobe reader and PDF reader, but when I attempt to open a pdf from a site on safari, it starts to load, then disappears.  Any way to fix this?

    Have downloaded both Adobe reader and PDF reader, but when I attempt to open a pdf from a site on safari, it starts to load, then disappears.  Any way to fix this?

    Try quitting the PDF apps and Safari like I describe below. Then reset the iPad. After it starts try again.
    Double click the Home button to show the screen with running and recently used apps. Each app icon will have a sample page above it. Flick up on the page (not the app icon) and the page will fly away and the app icon will disappear. This quits that app. Then reset your device. Press and hold the Home and Sleep buttons simultaneously until the Apple logo appears. Let go of the buttons and let the device restart. See if that fixes your problem.

  • Site won't display correctly when 'Published' to Business Catalyst but does when 'Preview' in browse

    Basically I have a subscription to Muse and with that the ability to host one site with Business Catalyst. When checking the first site I designed I'd use 'Preview in Browser' and the site occasionaly displayed incorrectly, so I changed my habits to publishing the work-in-progress site to the BC url with this current site.
    Unfortunately there are multiple display problems with doing this; the two images below show the difference between 'Publish' to the BC domain and 'Preview site in browser'.
    I've cleared the cache of the browser multiple times and used both Firefox and Safari and the problem still remains. I'm assuming it's a problem with Business Catalyst?
    Does anyone have a solution for this? Has data become corrupted in BC, and if so is there a way of 'flushing' the data held on the BC site clean to start from scratch?
    Would really appreciate some help here as it's impossible to show my client the current state of the site
    Thanks in advance
    Phil
    http://httpwiles06businesscatalystcom.businesscatalyst.com/clients.html

    Hi Phil
    I checked the site and i can see all the images in page.
    Can you try to check with a different browser or if possible on a different system or device ?
    Thanks,
    Sanjit

  • My nav styles aren't displaying correctly when viewing my blog on a tablet.

    Hi Everyone
    If anyone can let me know why the navbar on my blog dor2dor.com/blog isn't displaying corectly when i view this on a tablet or phone I would be much apreciative.
    If you look a the site it only seems to be giving the nav bar a width of 320px where as when you view this on a normal PC it display fine. Also the main website dor2dor.com displays fine on the tablet & phone so im guessing its something to do with wordpress.
    Any help would be greatly received as its really buggin me.
    Thanks in advance
    Will

    1 appears to be the one that is off the most.
    2 is slightly off
    You may have an extra fill assigned at the group level that is overiding the fill at the Path level. Doubleclick on the word Contents in your appearance palette to get to the path level. To fix you can delete the fill at the group level, or simply ungroup  to break that attribute.
    As Larry mentioned, posting the file is the best way to get an answer to this one.
    If you cannot post the file, we will need to know what color document color mode, and the color type and values.
    You can also check this setting.

  • Bridge crashes when viewing animation presets. How do I fix this?

    When I browse animation presets in Adobe Bride, Bridge crashes. How do I fix this?
    Thanks for your help.

    BOILERPLATE TEXT:
    Note that because this is boilerplate text, not all points may apply to any given, specific poster.
    If you give complete and detailed information about your setup and the issue at hand,
    such as your platform (Mac or Win),
    exact versions of your OS, of Photoshop (not just "CS6", but something like CS6v.13.0.6) and of Bridge,
    your settings in Photoshop > Preference > Performance
    the type of file you were working on,
    machine specs, such as total installed RAM, scratch file HDs, total available HD space, video card specs, including total VRAM installed,
    what troubleshooting steps you have taken so far,
    what error message(s) you receive,
    if having issues opening raw files also the exact camera make and model that generated them,
    if you're having printing issues, indicate the exact make and model of your printer, paper size, image dimensions in pixels (so many pixels wide by so many pixels high). if going through a RIP, specify that too.
    etc.,
    someone may be able to help you (not necessarily this poster).
    a screen shot of your settings or of the image could be very helpful too.
    Please read this FAQ for advice on how to ask your questions correctly for quicker and better answers:
    http://forums.adobe.com/thread/419981?tstart=0
    Thanks!

  • Slideshow captions appear to have boxes around them when viewed on mobile devices

    Hi... I searched for this problem but couldn't find a reference - appologies if I didn't quite use the right search terms and it's already been answered.
    I am having problems with a basic slideshow widget - when viewed on a PC (iMac in this instance) the image captions, counter and navigation buttons do NOT have any visible borders (I haven't stroked or filled the container boxes, other than the nav buttons). However, view the same slideshow on an iPad, or iPhone and there appears to be boxes around the caption, counter and nav buttons. I would prefer there to be no visible box outlines.
    The problem page can be viewed here (remember, fine on a PC, not fine on a mobile device)
    http://mikehiggs.co.uk/musesite/case-studies.html
    There are two slide shows on the page as I tried two different widgets - both have the same problem.
    The odd thing is, I used the same method on the Home Page slideshow at the top of the page and this is working fine.
    If anyone can shed any light on this 'problem' I'd very much appreciate it - I have tried everything I know at this stage.
    Thanks in advance of any help.
    Addendum...
    If I change the slideshow transitions from 'horizontal' to 'fade' the problem goes away. But I would prefer the slideshow to slide.
    Just thought this extra info may help diagnose the problem.
    Message was edited by: MikeHiggs

    Hi Mike
    I tried to check the link in PC and phone both , i don't see boxes around the caption or counters.
    Its the same view in desktop and phone.
    Phone View :
    Desktop view :
    Can you please check with another phone device and if you still see the same effect , please upload few screenshots.
    Thanks,
    Sanjit

  • I'm use two screens, Firefox 4 is not displaying correctlying on my second screen. How do I fix this? (I have Windows 7, 64 bit, and using an external video card)

    It only happens on the screen I'm using the external video card. I'm assuming its a bug.

    I think this is related to other posts, the solution at the moment seems to be to disable hard acceleration.
    see here: [http://support.mozilla.com/en-US/kb/troubleshooting%20extensions%20and%20themes#w_the-problem-does-not-occur-in-safe-mode]
    Similar problems
    [http://support.mozilla.com/en-US/questions/786524]
    [http://support.mozilla.com/en-US/questions/794823]

  • Imac 9,1 2009 20" freezes/crashes when on netflix, anyone have any tips to fix this?

    I ran a disk utility  told me that mack HD was found corrupt and nesds to be repaired.
    It said to start up my computer using my Mac osx disc  then use disk utility to repair. Problem is it keeps spitting the OSX disc out.
    Not sure if this is related to my computer freezing when i stream video maybe someone here knows??
    thanks

    You need to hold the "C" key down during the startup process, and you need to be using the correct CD, if you've got the right one it will mention holding the C key on it somewhere (may be in small type).
    The Netflix crashes are very likely because of the problem with the hard drive.

  • After updating to iOS 6.1.3 I have experience reboots when the keyboard pop out/or when I am typing. Any suggestions to fix this problem I have?

    Any suggestions as to what I can do to prevent such things to happen?

    A reset may help. Push and hold the Home button and the On/Off buttons at the same time for approximately 10-15 seconds, until the Apple logo reappears. Release both buttons and await restart.

  • Muse mobile site doesn't display full width

    The mobile version of my site doesn't display full width. It doesn't scale to fit the mobile screen as the set up width in Muse.
    I found a tip talking about add "viewport" code to muse site. When I insert the code to html window, it give me a box said "unable to generate a thumbnail"
    If add the view port code is the solution, how do I add this code to the <head> tag on muse?
    If not, what's the solution for this situation?

    One  problem where this occurs is that there could be some object (s) outside the layout page size.

  • Muse phone site loads incorrectly

    My uploaded desktop website loads properly but the phone version loads scaled down and aligned to the left with extra color on right.
    Not having luck resolving this yet.
    Michael

    I'm having this same issue. I'm not sure at what building point this happened but when my site is viewed by a mobile all the 100% width features appear to stop working and everything is aligned to the left (except the header and menu does not seem to be affected).
    Business Mamas | Home
    I've also been testing it at different resolutions and it looks fine on my Mac retina display 2880 x 1800 pixels and on my PC 1920 x 1080. However it has the same issue on my other laptop 1366 x 768.
    This is what it looks like when correctly displayed on my Mac & PC:
    This is when viewed on my other laptop (1366 x 768):
    This is when viewed on my mobile:
    Help would be appreciated!
    Thanks,
    Matt

  • [SOLVED] urxvt doesn't display correctly some special characters

    Hello everyone,
    I have a weird issue with urxvt. For some reason it doesn't display correctly some special character.
    Here is a comparison between xfce4-terminal and rxvt-unicode  (I used theses characters as exemple):
    xfce4-terminal :
    urxvt :
    And here is my .XDefaults file (without the color and the plugin part, since it's unrelevant):
    !Font
    URxvt.font: xft:PragmataPro:pixelsize=11:antialias=false
    !General
    URxvt.scrollBar: false
    URxvt*imLocale: fr_CH.UTF-8
    URxvt.saveLines: 5000
    URxvt.geometry: 95x26+50+50
    Has someone an idea what the problem could be?
    Thank's in advance.
    Last edited by mwm (2013-11-13 13:15:48)

    This is what I think is happpening.
    PragmataPro may not contain those glyphs.  It appears to have a wide array of glyphs but it is not unicode complete.
    Xfce-terminal is a vte terminal.  When a glyph cannot be found in the desired font, it will find the glyph in the 'closest' font.  Urxvt will only use the glyphs in the font or fonts specified.  If PragmataPro does not contain the glyphs, urxvt will display boxes.
    You can give urxvt a series of fonts to search. It will search for a glyph through the listed fonts in the order you specify.  Here's an example from my urxvt configs:
    urxvt*font: xft:DejaVu Sans Mono:style=Book:antialias=false:size=8, \
    xft:WenQuanYi Bitmap Song:size=8, \
    xft:FreeSerif:style=Regular, \
    xft:unifont:style=Medium:antialias=false
    I couldn't use FreeSerif or unifont as a main font, but for an occasional glyph, it works for me.  This file, http://www.cl.cam.ac.uk/~mgk25/ucs/exam … 8-demo.txt, can be displayed in urxvt correctly, with only a few unknow glyphs showing as boxes in the Amharic section.

  • Vim doesn't display correctly utf8 characters

    Hi,
    I don't use an utf8 locale, but some files (like latex sources of my reports) are in utf8 for compatibility with other pcs. Since a while, but i cannot recall exactly when (normally, I don't use vi for latex), it doesn't display correctly such files. Emacs does, kate does, but not vim. I tried to set encoding and file-encoding in vim, but it didn't fix the issue. Any clue? Is vim broken?
    Related question. It is safe to switch to utf8 locale (I mean, in rc.conf) months after the installation?
    domanov

    lang2 wrote::set enc=utf8
    It didn't work (as i said in my previous post).
    I changed from it_IT@EURO to it_IT.UTF8 in rc.conf, restarted and now vim is fine (the corresponding line in locale.gen was already uncommented and I rerun locale-gen just to be sure). Now man pages are really ugly, even worse if I erase the option -Tlatin1 from NROF line in man.conf (as suggested in the man.conf manual). Ok, let's deal with that, now.
    Do I risk to broke anything more important? Shall i convert to utf-8 all the text files in /home, /etc and so on??

Maybe you are looking for