Muse strips off digimarc copyright in jpeg files saved in photoshop. How do I prevent this from happening?
In Muse, the digimarc watermark I added in jpegs saved in photoshop get stripped off when uploaded to my website. How can I prevent this from happening? The jpegs are set to their exact size in Muse. Thanks.
Hello
My procedure is to resize the original psd file in photoshop, change the mode to 8bits, apply the digimarc filter and then save as jpeg. I place the file in Muse without changing its size and upload. I then right click to save the uploaded image from my website and bring it into photoshop to verify the digimarc watermark. The digimarc filter shows there is no watermark at all.
Similar Messages
-
probably asked and answered a million times but laptop died and my boyfriend and i are now sharing a computer when i went to back up my contacts i ended up with all of his? Is there a way to get them off without deleting each one? Also how do i prevent this from happening again? can someone direct me to some info on multiple phones on one itunes i am lost.
Hey there 79usma79!
I have a couple of articles for you that can help you troubleshoot the issues you are seeing with iTunes on Windows XP. The first is a general troubleshooting article, which can be found right here:
iTunes for Windows XP: Troubleshooting unexpected quits, freezes, or launch issues
http://support.apple.com/kb/TS1421
This article can help you find out if there are any conflicts between your copy of Windows XP and iTunes, and can tell you what to do if there are. Before going down the troubleshooting route though, you should take a look at this article, which can help you back up your entire iTunes library to an external hard drive, so if this issue is recurring, you will be able to restore from that backup and will not have to worry about losing your playlists or music again:
iTunes: Back up your iTunes library by copying to an external hard drive
http://support.apple.com/kb/HT1751
Thanks for using the Apple Support Communities!
Cheers,
Braden -
Whenever I try to open a file of any type, that file will open, as well as several other files I do not wish to open. How do I prevent this from happening?
Dealing With The Resume Feature of Lion
Managing Mac OS X Lion's application resume feature.
If you shutdown your computer you should get a dialog asking if you want applications to resume on the next startup. Simply uncheck the box to prevent that from occurring. Open General preferences and uncheck the option to Restore windows when quitting and re-opening apps. You can also install a third-party utility to control resume features on individual applications: RestoreMeNot or Application State Cleaner.
It is possible to completely stop the Resume feature although I'm unconvinced that it is that annoying. Nevertheless see the following:
If you have not yet done so you must first make your /Home/Library/ folder visible. Open the Terminal application in the Utilities folder. At the prompt paste the following command line:
chflags nohidden ~/Library
Press RETURN. Quit the Terminal application.
In the Finder navigate to the /Home/Library/Saved Application State/ folder. Delete the contents of the folder. Back up to the /Home/Library/ folder. Select the Saved Application State folder. Press COMMAND-I to open the Get Info window. In the Sharing and Permissions panel at the bottom click on the lock icon and authenticate. Set each of the listed entries to Read Only. Close the Get Info window.
Quit all open programs except the Finder (this is very important.) Next, navigate to the /Home/Library/Preferences/ByHost/ folder. Look for a .plist file with "com.apple.loginwindow." in the file name followed by some numbers in hexadecimal. Select the file. Press COMMAND-I to open the Get Info window and in the Sharing and Permissions panel click on the lock icon and authenticate. Set each of the listed entries to Read Only. Close the Get Info window. If you also find a file with the same filename but with a last extension of ".lockfile," then you should delete it.
The above should eliminate the Resume feature system-wide. Note that any future system updates or upgrades will likely undo these changes. You will then need to repeat this procedure assuming there are no major changes in OS X related to it. -
I have a ton of files on my iPod and just got an iPhone. Last time I updated all my files were lost; how do I prevent this from happening again?
Max,
It really can take very long to import and process so many images - I would not dare to make a prediction.
Can you open the Activity Viewer?
From Aperture's main menu bar: Window > Show Activity.
This window will tell you the filename of the image that is currently being processed.
if you are seeing, that the import is still far from being finished, you might to pause certain tasks directly from this panel, like the generation of previews or scanning for faces. I'd let the import run, if you see that it is making progress.
Have you enabled very time-consuming options, like the generation of high resolution previes or scanning for faces and places? if yes, and the import is not making any progress at all, I'd disable thes options in the Aperture preferences for the initial import. You can add these later for the projects where you want to use these features.
Regards
Léonie -
Why when I open an app (i.e. Word) some of the files I previously worked on also load/open? How do I prevent this from happening?
System Preferences>General...remove the check for the box labeled "Restore Windows when Quitting & re-opening apps".
-
Whenever I open a file in Lion, other files of the same sort that I opened previously automatically open up. For example, if I open a .jpg file, numerous other .jpg files that I opened previously in the day open up. How do I close these files to prevent them from showing up again, like in previous versions?
Dealing With The Resume Feature of Lion
Managing Mac OS X Lion's application resume feature.
If you shutdown your computer you should get a dialog asking if you want applications to resume on the next startup. Simply uncheck the box to prevent that from occurring. Open General preferences and uncheck the option to Restore windows when quitting and re-opening apps. You can also install a third-party utility to control resume features on individual applications: RestoreMeNot or Application State Cleaner.
It is possible to completely stop the Resume feature although I'm unconvinced that it is that annoying. Nevertheless see the following:
If you have not yet done so you must first make your /Home/Library/ folder visible. Open the Terminal application in the Utilities folder. At the prompt paste the following command line:
chflags nohidden ~/Library
Press RETURN. Quit the Terminal application.
In the Finder navigate to the /Home/Library/Saved Application State/ folder. Delete the contents of the folder. Back up to the /Home/Library/ folder. Select the Saved Application State folder. Press COMMAND-I to open the Get Info window. In the Sharing and Permissions panel at the bottom click on the lock icon and authenticate. Set each of the listed entries to Read Only. Close the Get Info window.
Quit all open programs except the Finder (this is very important.) Next, navigate to the /Home/Library/Preferences/ByHost/ folder. Look for a .plist file with "com.apple.loginwindow." in the file name followed by some numbers in hexadecimal. Select the file. Press COMMAND-I to open the Get Info window and in the Sharing and Permissions panel click on the lock icon and authenticate. Set each of the listed entries to Read Only. Close the Get Info window. If you also find a file with the same filename but with a last extension of ".lockfile," then you should delete it.
The above should eliminate the Resume feature system-wide. Note that any future system updates or upgrades will likely undo these changes. You will then need to repeat this procedure assuming there are no major changes in OS X related to it. -
When I try to compose an email from Godaddy's webmail in the Firefox browser. My steps are as follows:
-Open Firefox.
-Log in to Godaddy webmail.
-I hit the compose button.
-New window pops up. This is the window that I would compose an email in.
- Right after the compose window loads, I get another window that pops up. This window says "File Upload" in the upper left corner.
If I exit that window I can then compose my email, and life is good until I want to compose another email. Then the problem repeats. I have contacted Godaddy support and the problem is not on their end. Also the problem DOES NOT happen when using another browser (Internet Explorer).The Reset Firefox feature can fix many issues by restoring Firefox to its factory default state while saving your essential information.
Note: ''This will cause you to lose any Extensions, Open websites, and some Preferences.''
To Reset Firefox do the following:
#Go to Firefox > Help > Troubleshooting Information.
#Click the "Reset Firefox" button.
#Firefox will close and reset. After Firefox is done, it will show a window with the information that is imported. Click Finish.
#Firefox will open with all factory defaults applied.
Further information can be found in the [[Reset Firefox – easily fix most problems]] article.
Did this fix your problems? Please report back to us! -
If I save the file instead of open it, the file saves correctly (ie: without the added txt extension). If I attempt to open instead of save, the txt is added, resulting in the file opening as a text file instead of an eml file.
The Reset Firefox feature can fix many issues by restoring Firefox to its factory default state while saving your essential information.
Note: ''This will cause you to lose any Extensions, Open websites, and some Preferences.''
To Reset Firefox do the following:
#Go to Firefox > Help > Troubleshooting Information.
#Click the "Reset Firefox" button.
#Firefox will close and reset. After Firefox is done, it will show a window with the information that is imported. Click Finish.
#Firefox will open with all factory defaults applied.
Further information can be found in the [[Reset Firefox – easily fix most problems]] article.
Did this fix your problems? Please report back to us! -
My iPad is turning on and off randomly when it has power Why? and how do I stop this from happening?
Do I need to send this back to the apple store?
When I have it plugged into the main power supply it only goes up to 3% of power and when I plug it into iTunes it runs out of power in about 2 minuites.I think you may need to book an appointment with a genius! They will fix it or replace it for you, for free!!! You can book an appointment at your local apple store at http://www.apple.com/retail
Hope this helps
Conchuir -
after making a call I put my phone in my pocket and when I bring it out to make a call the player is on killing battery life. How can I shut the player off or prevent this from happening?
Try to position your iphone that the screen is facing away from your skin.
Make sure that the back part of your phone will be the one that will contact your skin inside your pocket
Thats what i do:) -
I have the shuffle option off on my iPhone 4 but when I listen to an album it does not play the songs in order. How do I stop this from happening?
This is the control DaVBMan is talking about. Tap the shuffle control until it shows white for shuffle off.
-
When importing my video from the event library to the project library, it's zooming in and
narrowing the width of my footage. How do I stop this from happening?In the project, double-click on the clip to open the Clip Inspector. In the Clip tab you will see an item about two thirds down labelled "Stabilization". If checked, uncheck the box "Smooth clip motion".
Stabilizing clips causes a zoomed in effect, with the extent of the zoom dependent upon how shaky the footage is. There is a slider beneath the check-box labelled "Maximum Zoom" - this can be draggged back and forth to adjust the zoom effect if desired, once the clip has been stabilized.
You may have chosen to analyze clips for stabilization when importing to iMovie (that's a choice provided by iMovie upon import). If so, it's best to turn off an option in iMovie's preferences. Go to this from the iMovie menu item iMovie>Preferences. Click on the Browser tab and deselect (uncheck) the box labelled "Automatically stabilize clips that have been analyzed".
I prefer to import clips without analyzing, as this speeds up the import process. Afterwards, in the Event you can check for any overly shaky clips, then analyze them in the Inspector. If necessary, once dropped into a Project, you can stabilize them as desired. You can also stabilize clips directly in the Project without having to first analyze them in the Event.
John
Message was edited by: John Cogdell -
I use to administrate my DSL modem via an ip-address. When I enter it into FF8 I am asked where to save the file. Why and how can I prevent FF8 from doing that?
And now anytime I am entering an ip-address I am asked if I want to download the file.It happens when the modem server doesn't send the file as text/html, but with another MIME type.<br />
I tried the index.html addition in case the server might send that file as text/html.<br />
If your DSL modem has a support website then you can try to ask there for advice about how to configure the modem server. -
I have an iPhone 4S and I have set the VoiceOver to off, but when I run with iTunes on, it still comes on. How do I stop this from happening?
This is from article on device with multiple computers:
iPod shuffle and iPhone are intended for use with a single computer. You cannot load music from multiple computers or iTunes libraries onto iPod shuffle and iPhone like you can with other devices.
http://support.apple.com/kb/HT1202 -
I have set up two users, one for myself and one for children. The computer automatically logs in for the children with no password required. When the children go to spotlight and type in a search criteria all of my files show and open up. How do I prevent this?
Log in to your account, and move all your files to your home folder. No other users should be able to access them there and they won't show up with a Spotlight search.
Make sure your kids' account(s) do not have admin privileges.
Maybe you are looking for
-
Best way to record 50 kS/s data to file
I am trying to read data from a DAQ at a sampling rate of 50 kS/s and record it to a file. My application needs to run for at least a few hours. Initially, I tried a producer-consumer loop pattern with a Write to Measurement File Express VI, but it w
-
Error '800a01a8' - no object/line indicated
I'm getting the following error on ALL my detail pages without ANY indication of what object or which line number to look for. I'm dumbfounded! Does anyone know where to start looking? My pages view and work just FINE - the error is buried in the
-
Numbering schema in Product Hierarchy reg
Hello Experts, We are implementing CRM 7.0, as part of the initial load we had downloaded DNL_CUST_PROD1 from ECC. But after replication we came to know that the numbering schema for Product Hierarchy is not 5,5,8 but changed to something else. When
-
Is my hard disk detected correctly?
Drive: EIDE WD1200JB 120GB 8mb cache (Western Digital) When I used Gentoo last year I had problems with slow file copying because DMA wasn't enabled. In Arch it feels like the DMA is ok, but I've noticed that sometimes a program will fail to load, bu
-
Lobby Ambassador - Selecting Profile
We have a WCS version 5.2.130 and WLC version 4.2.130.0 Not very familiar with it. The issue here is although the WLC is reachable from WCS, I can't seems to select a profile when we want to create guest users from lobby ambassador. The WLC has been