Muse will now shutdown. Assert: "Swatch not found"

Hi,
is there any possibility to get this fixed in a file?
When I open my site I get this error and muse quits. I used the option "Remove unused colors from swatch."

Can you please send your .muse file, with a link to this thread, to [email protected]? If the file is larger than 20mb, you can use a service like Adobe SendNow or SendThisFile.

Similar Messages

Adobe Muse will now shut down

I'm getting this a lot today.
"ERROR: Adobe Muse will now shut down"
"Assert: Unknown trigger policy click"
It happens when I am trying to set the different states of a tabbed widget and my mouse/pen doesn't seem to let go of the certain state when I click on it.

Please send your .muse file and a link to this forum topic to my attention to [email protected] If your .muse file is larger than 20MB use a filesharing service like SendThisFile or Adobe SendNow.
- Abhishek Maurya

Assigning a Muse Template to the 404 Page Not Found page

I recently create a template for my blog by doing the following:
I created a template in Muse
I added the tag {tag_pagecontent} to a page in Muse and assigned the page to the template.
I then uploaded that page to Business Catalyst.
BC looked at the page I created in Muse as a template. I'm assuming this is because it had the {tag_pagecontent} tag.
I then assigned the page to the blog and everything worked perfectly.
Now I would like to assign the main template on my web site to the 404 Page Not Found page so that the pages are consistent. How can I do this?
How can I get BC to recognize a page created in Muse as a BC template? Or simply, how can I assign a template created in Muse to the 404 pages without adding a {tag_pagecontent} or similar tage in Muse? I currently do not see any of the templates I created in Muse as an option to select.

Hi Rick,
In order to access all the menu items on BC, kindly follow the below steps:-
1)On the BC dashboard, expand the dropdown on the top right side that has your name.
2)Select 'My details'
3)Scroll down and check 'Enable online content editing' check box.
4)Save the details.
5)It will ask for the password, enter it and click continue.
6)Check the site manager menu again. It should have all the submenus.
Regards,
Neha

Managed server now working: Error 404--Not Found

Hi All,
I am very new to this field and have just installed weblogic server 10.3.3.
I have created an Admin server and a cluster of two Managed servers.
Admin server is working and is opening in the UI console.
When i am starting the Managed server, in the cmd console it is showing
<Notice> <WebLogicServer> <BEA-000360> <Server started in RUNNING mode>
but in UI it is showing as :
Error 404--Not Found
From RFC 2068 Hypertext Transfer Protocol -- HTTP/1.1:
10.4.5 404 Not Found
The server has not found anything matching the Request-URI. No indication is given of whether the condition is temporary or permanent.
If the server does not wish to make this information available to the client, the status code 403 (Forbidden) can be used instead. The 410 (Gone) status code SHOULD be used if the server knows, through some internally configurable mechanism, that an old resource is permanently unavailable and has no forwarding address.
how to start Managed Weblogic server?
TIA,
Vishal

Hi Sandeep,
yes i m using http://host-name-of-Admin-Server:Port/console to check the status.
i have clustered the two managed server.
To start the Managed server i m using the command:
startManagedWebLogic.cmd ms_1 http://localhost:7001
and in the cmd console i am getting message as:
<Mar 17, 2011 4:23:03 PM IST> <Info> <Management> <BEA-141107> <Version: WebLogi
c Server 10.3.3.0 Fri Apr 9 00:05:28 PDT 2010 1321401 >
<Mar 17, 2011 4:23:04 PM IST> <Notice> <WebLogicServer> <BEA-000365> <Server sta
te changed to STARTING>
<Mar 17, 2011 4:23:04 PM IST> <Info> <WorkManager> <BEA-002900> <Initializing se
lf-tuning thread pool>
<Mar 17, 2011 4:23:04 PM IST> <Notice> <LoggingService> <BEA-320400> <The log fi
le C:\Admin\Middleware\user_projects\domains\base_domain\servers\ms_2\logs\ms_2.
log will be rotated. Reopen the log file if tailing has stopped. This can happen
on some platforms like Windows.>
<Mar 17, 2011 4:23:04 PM IST> <Notice> <LoggingService> <BEA-320401> <The log fi
le has been rotated to C:\Admin\Middleware\user_projects\domains\base_domain\ser
vers\ms_2\logs\ms_2.log00001. Log messages will continue to be logged in C:\Admi
n\Middleware\user_projects\domains\base_domain\servers\ms_2\logs\ms_2.log.>
<Mar 17, 2011 4:23:04 PM IST> <Notice> <Log Management> <BEA-170019> <The server
log file C:\Admin\Middleware\user_projects\domains\base_domain\servers\ms_2\log
s\ms_2.log is opened. All server side log events will be written to this file.>
<Mar 17, 2011 4:23:06 PM IST> <Notice> <Security> <BEA-090082> <Security initial
izing using security realm myrealm.>
<Mar 17, 2011 4:23:07 PM IST> <Notice> <WebLogicServer> <BEA-000365> <Server sta
te changed to STANDBY>
<Mar 17, 2011 4:23:07 PM IST> <Notice> <WebLogicServer> <BEA-000365> <Server sta
te changed to STARTING>
<Mar 17, 2011 4:23:09 PM IST> <Notice> <Log Management> <BEA-170027> <The Server
has established connection with the Domain level Diagnostic Service successfull
y.>
<Mar 17, 2011 4:23:09 PM IST> <Notice> <Cluster> <BEA-000138> <Listening for ann
ouncements from cluster Cluster_1 on 239.192.0.0:8050.>
<Mar 17, 2011 4:23:09 PM IST> <Notice> <Cluster> <BEA-000133> <Waiting to synchr
onize with other running members of Cluster_1.>
<Mar 17, 2011 4:23:24 PM IST> <Notice> <Cluster> <BEA-000142> <Trying to downloa
d cluster JNDI tree from server ms_1.>
<Mar 17, 2011 4:23:24 PM IST> <Notice> <Cluster> <BEA-000164> <Synchronized clus
ter JNDI tree from server ms_1.>
<Mar 17, 2011 4:23:24 PM IST> <Notice> <WebLogicServer> <BEA-000365> <Server sta
te changed to ADMIN>
<Mar 17, 2011 4:23:24 PM IST> <Notice> <WebLogicServer> <BEA-000365> <Server sta
te changed to RESUMING>
<Mar 17, 2011 4:23:24 PM IST> <Notice> <Cluster> <BEA-000162> <Starting "async"
replication service with remote cluster address "127.0.0.1">
<Mar 17, 2011 4:23:24 PM IST> <Notice> <Security> <BEA-090171> <Loading the iden
tity certificate and private key stored under the alias DemoIdentity from the jk
s keystore file C:\Admin\Middleware\wlserver_10.3\server\lib\DemoIdentity.jks.>
<Mar 17, 2011 4:23:24 PM IST> <Notice> <Security> <BEA-090169> <Loading trusted
certificates from the jks keystore file C:\Admin\Middleware\wlserver_10.3\server
\lib\DemoTrust.jks.>
<Mar 17, 2011 4:23:24 PM IST> <Notice> <Security> <BEA-090169> <Loading trusted
certificates from the jks keystore file C:\Admin\Middleware\jdk160_18\jre\lib\se
curity\cacerts.>
<Mar 17, 2011 4:23:24 PM IST> <Notice> <Security> <BEA-090898> <Ignoring the tru
sted CA certificate "CN=T-TeleSec GlobalRoot Class 3,OU=T-Systems Trust Center,O
=T-Systems Enterprise Services GmbH,C=DE". The loading of the trusted certificat
e list raised a certificate parsing exception PKIX: Unsupported OID in the Algor
ithmIdentifier object: 1.2.840.113549.1.1.11.>
<Mar 17, 2011 4:23:24 PM IST> <Notice> <Security> <BEA-090898> <Ignoring the tru
sted CA certificate "CN=T-TeleSec GlobalRoot Class 2,OU=T-Systems Trust Center,O
=T-Systems Enterprise Services GmbH,C=DE". The loading of the trusted certificat
e list raised a certificate parsing exception PKIX: Unsupported OID in the Algor
ithmIdentifier object: 1.2.840.113549.1.1.11.>
<Mar 17, 2011 4:23:24 PM IST> <Notice> <Security> <BEA-090898> <Ignoring the tru
sted CA certificate "CN=GlobalSign,O=GlobalSign,OU=GlobalSign Root CA - R3". The
loading of the trusted certificate list raised a certificate parsing exception
PKIX: Unsupported OID in the AlgorithmIdentifier object: 1.2.840.113549.1.1.11.>
<Mar 17, 2011 4:23:24 PM IST> <Notice> <Security> <BEA-090898> <Ignoring the tru
sted CA certificate "OU=Security Communication RootCA2,O=SECOM Trust Systems CO.
\,LTD.,C=JP". The loading of the trusted certificate list raised a certificate p
arsing exception PKIX: Unsupported OID in the AlgorithmIdentifier object: 1.2.84
0.113549.1.1.11.>
<Mar 17, 2011 4:23:24 PM IST> <Notice> <Security> <BEA-090898> <Ignoring the tru
sted CA certificate "CN=KEYNECTIS ROOT CA,OU=ROOT,O=KEYNECTIS,C=FR". The loading
of the trusted certificate list raised a certificate parsing exception PKIX: Un
supported OID in the AlgorithmIdentifier object: 1.2.840.113549.1.1.11.>
<Mar 17, 2011 4:23:24 PM IST> <Notice> <Server> <BEA-002613> <Channel "Default"
is now listening on 10.174.4.84:7201 for protocols iiop, t3, CLUSTER-BROADCAST,
ldap, snmp, http.>
<Mar 17, 2011 4:23:24 PM IST> <Notice> <Server> <BEA-002613> <Channel "DefaultSe
cure" is now listening on 10.174.4.84:7202 for protocols iiops, t3s, CLUSTER-BRO
ADCAST-SECURE, ldaps, https.>
<Mar 17, 2011 4:23:24 PM IST> <Notice> <Server> <BEA-002613> <Channel "Default[1
]" is now listening on 127.0.0.1:7201 for protocols iiop, t3, CLUSTER-BROADCAST,
ldap, snmp, http.>
<Mar 17, 2011 4:23:24 PM IST> <Notice> <Server> <BEA-002613> <Channel "DefaultSe
cure[1]" is now listening on 127.0.0.1:7202 for protocols iiops, t3s, CLUSTER-BR
OADCAST-SECURE, ldaps, https.>
<Mar 17, 2011 4:23:24 PM IST> <Notice> <WebLogicServer> <BEA-000332> <Started We
bLogic Managed Server "ms_2" for domain "base_domain" running in Development Mod
e>
<Mar 17, 2011 4:23:26 PM IST> <Notice> <Cluster> <BEA-000102> <Joining cluster C
luster_1 on 239.192.0.0:8050>
<Mar 17, 2011 4:23:26 PM IST> <Notice> <WebLogicServer> <BEA-000365> <Server sta
te changed to RUNNING>
<Mar 17, 2011 4:23:26 PM IST> <Notice> <WebLogicServer> <BEA-000360> <Server sta
rted in RUNNING mode>

HP G42 Notebook Windows 7 - continued to crash - now says Reboot Device not found.

I have a HP G42 Notebook Laptop
Product Number - XZO46UA#ABA
It is a Windows 7 64 - bit PC
What it has been doing is Constantly Crashing and going to blue screens, and when you move the mouse to turn it on the fans ill be very loud, and at times Lap-top will get extremely hot!! Just Yesterday it crashed and then restarted but then it went to a black screen that says (Boot Device Not Found) and i don't think that i have a Reboot Disk!!
And there has been absolutely no Changes made to the PC before this issue had accured.
If anybody can give me any information on how to Fix this problem or if i have to go to HP store or have Technition come out?
>>>Thank you!<<<

Please close the topic:
Suddenly the system now recognises that the monitor has a 5-touch input and the installation is running.
Not sure what solved it:
- Had Windows check for a frech driver (it was up-to-date)
- Fiddled around a little in Paint just to see if 5-touch input is working
- Activated a second display (not touchscreen)
I then looked at the System information screen again, and the number of tocuh point appeared correctly

Followed cnet direct. to move itunes from c drive to ext. drive, worked, deleted off c, still worked, now says AVFoundationCF.dll not found-reinstall, don't want to lose data

I recently followed cnet directions to move itunes from c drive on pc running xp pro, to external drive, for space reasons. Process worked. I tunes ran from e drive, verified data on e drive, deleted all apple applications on c drive so I could remove itunes and recover space. Verified itunes still worked off of new short cut and and that target was e drive. Now itunes won't open and get message "AVFoundationCF.dll not found - reinstall", or "not installed correctly Error 7 (windows error 126) - reinstall." Tried download, install from apple.com for itunes on c drive, but message "library can't be read because it was created by a newer version of itunes." How do I fix this without losing all of our "material" saved on the itunes program?

Thank you for the reply, but so far no go. I tried through control panel and add remove programs with repair option as suggested but got error..."C:\programs......AppleAplicationSupport.msi cannot be found." This was after I have done new download and install of itunes to the c drive. I have not taken any steps to try use that down load or reload any material on it. I changed path to external drive an folder, E:\ itunes and got the "error not valid installation package." Still looking for answers...

HT1386 Upgraded to the latest iTunes (ver11) I have an iPod classic 30gig ver 1.3 Now I get iTunes not found, error 68 and 69 during sync. Diagnostics shows iPod, iTunes sees it but it won't sync and won't disconnect.

Since upgrading to version 11, my iPod will not sync properly. I get errors 68 and 69, iPod not found, no disc in drive, wrong volume in drive and iPod cannot be sync'd because I don't have enough access privledges. I have restored the iPod a bunch of times, reloaded iTunes twice and sacrifices a virtual virgin to a virtual god. Visited Genius Bar in Columbia, MD once and I have scheduled a second visit for this Friday, 1/4/13.
Is anyone else having these problems?

This is the iPod touch forum. I requested the moderators to move your post to the iPod classic forum.

"Visit" now gives a "404 not found" result

Think I messed up big time here, somehow.
I published 3 websites I made onto my mobileme account. But since
I changed a few things around, including the name of the site, when I
click on "visit" I get a 404 Not Found message. I get this for all three
websites I made and have no idea how to get back to normal. I can make
alteration still to the websites, but if I publish them I can't see the results.

I have indeed. I forgot to mention in my last reply to you that when I try to load the index page from iDisk
I get this reply
"No file exists at the address “/Users/john/Downloads/John_Burton/Welcome.html”."
Now when I click on "visit" I get this address appear in the address bar... http://www.johnburtonglass.com/John_Burton/index.html
In the Main window I see this message
Not Found
The requested URL /John_Burton/index.html was not found on this server.
Additionally, a 404 Not Found error was encountered while trying to use an ErrorDocument to handle the request.

Before i did not have to type a full address for a website to come up, just a key word e.g. "Firefox" would take me to mozilla, "google" would take me to google... now I get "File not Found" and rather have to type a full URL address, why is this?

File not found
Firefox can't find the file at jar:file:///C:/Program Files/Mozilla Firefox/omni.jar!/chrome/en-GB/locale/browser-region/region.propertiesgoogle.

Try this:
http://www.groovypost.com/howto/how-to/change-firefox-4-address-bar-search-engine-provider/

Muse only publishing homepage - other pages 'not found'

Hi everyone,
I'm trying to publish my temporary site but whenever it finishes and opens in the browser, only the homepage loads. As soon as I try to click on to any other page I'm faced with a 'page not found' alert.
I've double checked that the 'export page' option is checked on every page. Any ideas?
Thanks,

Hi Aishvarya,
Thanks for getting in touch, here's the url: http://finance-innovation-lab.businesscatalyst.com

Filter API will hit the database if not found in Cache???

I wrote a sample program using Filter API i.e. LikeFilter, EqualsFilter which will query the cache (i.e. Map in memory) based on the criteria. But what if it doesn't found the entries in Cache . Will it then query the database with similar criteria.
I don't think so ... Please correct me if i am wrong.
I need to implement Pre-loading the cache and the link http://download.oracle.com/docs/cd/E14526_01/coh.350/e14509/preloadcache.htm#CACCFCFJ
use the Filter API. I am not sure if i can rely on pre-loading the cache from database.
Any sample example preloading the data from database into cache will be greatly appreciated
Regards,
Bansi

Then you won't need the Invokable code (anyway its owned by my employer ;-)
All you need to do is write a simple program something like this :
1. Query everything from the database "select * from table"
2. Iterate through the ResultSet converting them all into objects
3. Cache.put() these objects into Coherence.
Now some optimisations. Re :
1. You have a single query going to the database and will be connecting to a single cluster member. You could divide the query up by some logical division (eg. Customer / Date etc.) and then have many clients putting in concurrently, but it raises the complexity.
2. It is also possible to store List tuples in Coherence, I once worked on a very nice project along those lines.
3. Cache.putAll() is much faster than put() and you should batch these into sizes of 1000 for maximum performance.
However, I would ignore these optimisations for now (tho 3. is the most useful).
You will have to manually kick off this process when you restart your cluster (or put it in your startup script). People generally write a cluster restart script. Tho JavaServiceWrapper is very nice for restarting nodes that run out of memory. When you get really complicated you can use something like FabricServer to dynamically control your cluster, but lets get the basics working now.
Best, Andrew.

CS6 Camera Raw Updated to 8.5....now photoshop saying 'file not found'

So I updated my camera raw for my CR2 files. Now when I try to open my CR2 file it's saying that the 'Camera raw file cannot be found.' I'm extremely confused. I've tried clicking on the Camera Raw plug-in to see what version I have, but it's also giving me that exact error. Help! What did I do wrong?! I've restarted my computer and that has not helped.

Please give details.
Just how did you update to ACR 8.5?
What do you see under About Plug-in > Camera Raw?
Have you tried re-installing?
What exact version of Photoshop CS6? Photoshop 13.point what? What OS?
BOILERPLATE TEXT:
If you give complete and detailed information about your setup and the issue at hand, such as your platform (Mac or Win), exact versions of your OS, of Photoshop and of Bridge, machine specs, what troubleshooting steps you have taken so far, what error message(s) you receive, if having issues opening raw files also the exact camera make and model that generated them, etc., someone may be able to help you.
Please read this FAQ for advice on how to ask your questions correctly for quicker and better answers:
http://forums.adobe.com/thread/419981?tstart=0
Thanks!

TS1702 I purchased a game but had to update my card details now it says purchase not found

I made an in app purchase to unlock a game but had to update my card details. Now it says I have already purchased the game but no record of the purchase is found. I have tried deleting and re downloading the game and tried turning the iPad off and on. What do I do?

Hello Andenbat,
Thank you for the details of the issue you are experiencing with your In-App purchase. I found some information about redownloading In-App purchases that might help:
Redownload an In-App Purchase
If you lose your In-App Purchases because apps were accidentally deleted or you had to restore your device without a backup, you may be able to download some of your purchases again for free. See which types of In-App Purchases you need to purchase again or can redownload for free in the table:
Type
Download for free
Purchase Again
Consumable
X
Non-consumable
X
Non-renewing subscriptions
X
Auto-renewable subscriptions
X
To download an In-App Purchase again, you must download it from within the installed app using the same iTunes Store account name you used for the original In-App Purchase.
iTunes Store: About In-App Purchases
http://support.apple.com/kb/ht4009
If you continue to experience issues with the purchase, I recommend reporting the issue to the iTunes Store using the steps in the following article:
How to report an issue with your iTunes Store, App Store, Mac App Store, or iBooks Store purchase
http://support.apple.com/kb/ht1933
Thank you for using Apple Support Communities.
Best,
Sheila M.

Trying to move itunes to another pc. now cant sync, files not found even though theyre showing in itunes

Ive tried to move my itunes to another pc. I copied all onto and external harddrive and transfered to the other laptop. It all shows up in the itunes libruary and i can play them but when i try and sync to my iphone it comes with an exclamation mark and says the original file cannot be found and nothing goes on my phone. Totally stuck and confused!!

Then something did not transfer correctly.
What exactly did you copy? Was it the ENTIRE iTunes folder? If not... start over and copy the ENTIRE iTunes folder.

Error Message When Saving - "A Serious Error Has Occurred...Adobe Muse will now shut down".

This is the message that keeps popping up everytime I try to save a file in Adobe Muse:
I had made revisions to this site at the end of November, 2012 with no problems. After returning from Christmas vacation, I started up Muse and updated to the newest version:
The computer that I am working on is:
I really need to get these revsions to my website made ASAP so any suggestions would be greatly appreciated. Thanks.

It sounds like your .muse file has an extra object in it that we need to remove for you. You should have a file in your user documents folder named 'MuseLog.txt' please send that file, and your .muse file to [email protected] so we can fix your file and send it back. Please include a link to this forum topic so we know what needs to be done. If your file is >20 MB, use a filesharing service like SendThisFile or Adobe SendNow.
Thanks.

Muse will now shutdown. Assert: "Swatch not found"

Similar Messages

Maybe you are looking for