MUSE won't open, needs AIR(??)

Downloaded MUSE using Creative Cloud. When I attempt to open MUSE, I get a dialog box that says the program needs Adobe AIR in order to run. What the heck is AIR and why does MUSE need it?
THANKS!

Hi,
If you check the Tech specs of Adobe Muse, it is written there as well as system requirement.
http://www.adobe.com/products/muse/tech-specs.html
You can get the latest version of AIR from the link below
http://get.adobe.com/air/?promoid=JZEFV
Hope this helps

Similar Messages

Hard Drive icon missing - Desktop folders won't open - Need Help!

I need help! I have a 400 MHz PowerPC G4 with 768 MB SDRAM, no DVD drive - was running OS X 10.3.9 quite happily. We became owners of a new iPod Nano - so we had to upgrade to 10.4.
(I'm writing this on my 800 MHz PowerPC G4 with 768 MB SDRAM, (also no DVD drive) that I upgraded from OS X 10.3.9 to 10.4.11 without incident.)
Installed 10.4 using a FireWire Hard Drive - installed software updates to 10.4.11 - ran Disk Utility - ran MacJanitor - ran DoktorKleaner - everything was working well.
Rebooted and the Hard Drive Icon had disappeared from desktop. Folders on desktop have all lumped together in the top right hand corner of the screen, and refuse to open.
Only programs in the dock still work - clicking on the Finder icon only gives the option to hide. New Finder Window does not work. Programs can be found in Spotlight, but if they're not in the dock they won't open. Trash won't open or empty.
I attempted to reinstall Mac OS X using FireWire, but now the Hard Drive is full and is telling me it will erase and reinstall. I need to save files off this computer now (Sadly no backup exists) before my wife readies divorce papers.
I tried using FireWire Target Disk Mode to copy files - with the 400MHz as Target I just get a spinning Beach Ball any time I click on the Icon. After far too long it opened up an empty window.
With the 800MHz as the target, the 400MHz does not show it on the desktop, so I have no way of copying files to it.
Anyone have some advice that doesn't involve a time machine?

Whenever something starts going wrong with the computer I suggest you first boot from the installer disk, select language if applicable, choose utilities, run Disk Utility and verify (and repair if necessary) the drive. Then repair the permissions on your computer. You can also repair permissions from DU on your main drive while booted, but to properly verify and repair your drive you have to run it from a drive other than the boot drive.
[Resolve startup issues and perform disk maintenance with Disk Utility and fsck|http://docs.info.apple.com/article.html?artnum=106214]
[Using Disk Utility in Mac OS X 10.4.3 or later|http://docs.info.apple.com/article.html?artnum=302672]
[Disk Utility's Repair Disk Permissions|http://docs.info.apple.com/article.html?artnum=25751]
From BDaqua (couldn't have said it better):
"Try Disk Utility
1. Insert the Mac OS X Install disc that came with your computer, then restart the computer while holding the C key.
2. When your computer finishes starting up from the disc, choose Disk Utility from the Installer menu. (In Mac OS X 10.4 or later, you must select your language first.)
Important: Do not click Continue in the first screen of the Installer. If you do, you must restart from the disc again to access Disk Utility.
3. Click the First Aid tab.
4. Click the disclosure triangle to the left of the hard drive icon to display the names of your hard disk volumes and partitions.
5. Select your Mac OS X volume.
6. Click Repair. Disk Utility checks and repairs the disk.
Then Safe Boot, (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions, reboot when it completes."
A few questions:
Was this a retail installer disc that you used to do the upgrade?
How much free space do you have on the computer?
Did you use the [PPC Combo updater|http://www.apple.com/support/downloads/macosx10411comboupdateppc.html] to get to 10.4.11?
Did you do all these updates in one single session or restart and check your computer had accepted them okay between each update? It is critical to repair permissions before and after each update otherwise the installers won't install fully and you end up with a mix of versions.
You can set the Finder Preferences, general, to display a hard drive icon, but it sounds like your problems are going beyond that?
You can also try trashing your Users -> home folder -> Library -> Preferences -> com.apple.finder.plist file and see if that clears up the issue. That sets the Finder preferences and if it gets corrupted it will cause Finder problems.

Chrome and safari now won't open on air after update

AAt first working fine, updated software a couple of days ago then progressively getting slower then freezing constantly and now won't even open.....

Try a restart.
Do a backup, using either Time Machine or a cloning program, to ensure files/data can be recovered. Two backups are better than one.
Try setting up another admin user account to see if the same problem continues. If Back-to-My Mac is selected in System Preferences, the Guest account will not work. The intent is to see if it is specific to one account or a system wide problem. This account can be deleted later.
Isolating an issue by using another user account
Try booting into the Safe Mode using your normal account. Disconnect all peripherals except those needed for the test. Shut down the computer and then power it back up after waiting 10 seconds. Immediately after hearing the startup chime, hold down the shift key and continue to hold it until the gray Apple icon and a progress bar appear and again when you log in. The boot up is significantly slower than normal. This will reset some caches, forces a directory check, and disables all startup and login items, among other things. When you reboot normally, the initial reboot may be slower than normal. If the system operates normally, there may be 3rd party applications which are causing a problem. Try deleting/disabling the third party applications after a restart by using the application un-installer. For each disable/delete, you will need to restart if you don’t do them all at once.
Safe Mode - About
Safe Mode - Yosemite

Muse won't open.

Now I have to type this again. Already put in 1st wondow that said QUESTION.
I have full Adobe CC. You take from me each month for that. Muse took an update over weekend. After that and now when I try to open, I get that stupid thing where you want my password on the regular computer I use to access a program I am paying for. Now it goes round & round then says I'm not on internet and has no solution. I have AOL & IE11 on and working just fine. I am able to get to this page and send this message. Same over weekend. I NEED TO BE ABLE TO USE THE PROGRAMS I AM PAYING FOR ALL THE TIME. FIX THIS.

Hello
Please check if the steps listed in the below threads help resolve the issue:
http://forums.adobe.com/message/4744013
http://forums.adobe.com/message/5689989
Cheers
Parikshit

LR4 - lrcat won't open, need advice on re-install

I cannot open one of my catalogs in Lightroom 4 and I need help.
It's a large catalog, created in LR4, and it's always worked fine. It lives on an external hard drive (along with all the pictures in that catalog).
The other night, I set another hard drive down and touched the first drive, accidentally disconnecting it from the computer while LR was open (or possibly while LR was in the process of opening).
When I reconnected the drive and tried to open the catalog again, I received a message that the catalog couldn't be opened since it was open in another application. (Nothing else was open or using it, obviously.)
I researched the internet, found a suggestion, and removed the .lock file from the catalog folder. NOW I am getting the message "Unexpected error opening catalog. The catalog could not be opened due to an unexpected error."
As I research this, it looks like I MIGHT have to re-install the software.
---- Is this true?
---- IF I have to reload the software, do I lose anything? Do I lose my edits, my history, my preferences?
Sorry to be clueless - I haven't done this before.
I want to preserve the history of all of the edited photographs, not just the "composite LR adjustment" or whatever you call it... some of the folders of pictures have matching .xmp files and some do not. I think this might be due to a preferences change a few months after I created the catalog - I guess it doesn't apply this change retroactively, or perhaps it would have had I opened those folders... not sure. I had backed up the original RAW files (which are still present on the external hard drive and seem just fine), but the catalog hasn't been backed up recently.
I hope this is clear. I think I have to re-install LR4, and I just want to make sure I can keep all the work I've done. Any help or advice would be deeply appreciated. Thanks!

I found the plist file and deleted it, but it had no effect. It made things more confusing: I did get the exact same error message whenever I try to load the catalog (once I'd found it again - it didn't show up anymore), but in addition to that problem, NO OTHER CATALOG SHOWED UP! (I imagine this is not news to you, but for some reason, I didn't know the catalogs would all be gone.) I was able to locate one of the other lrcat files and open it, but when I did so, Lightroom knew which images should be in it but it didn't know where to look. I'd have to go back and relocate dozens of folders in all my catalogs. I have around 750,000 images in various folders and catalogs, on several hard drives. You'd think I'd know more about LR, but I just use it... and I have never had a problem like this.
I did back up the preferences file on an external drive. I reloaded it, and now I'm back to square one. The other catalogs are there again, and they all work. It's just my main work catalog that's not opening.
I have no idea what to do... I don't know if reinstalling the software means I'm losing all my work... I wish I understood Lightroom better. I don't know where to look for this information.
D.J - I'm sorry if I should know more - I clicked on the unhelpful button, but if you were correct and I am too clueless to have done what you said, I hope I can go back and give you a good rating. I didn't realize that you get points or something if you help people. Thank you for trying to help me.
All of this because of one drive getting unplugged. Oy.
Edit - when I say that the catalogs vanished or didn't show up, I meant that they didn't show up in the opening screen where it asks me which catalog I wish to open. They were all still in their computer or hard drive locations. Sorry.

Numbers Spreadsheets won't open, need latest version?

I'm trying to open important Numbers spreadsheets and it’s telling me unable to do it until I download the latest version of Numbers - But I have the latest version!! Don’t know what to do next.

Hi betbet,
You have both '09 and 3 on your computer. Make sure you are in 3.
Check out Wayne's tip.
Need newer version of Numbers to open file
quinn

My Muse file won't open: "This Adobe Muse site file requires a newer version of Adobe Muse. Please update to the latest version."

My final project for this quarter in a web design class is due in less than a week. And suddenly, after months of working with this exact file, it won't open. I'm trying to open it in CC (newest version of Muse) at school. At home, I downloaded a trial version of it. I would think the trial version would be the absolute newest version..and even if it wasn't, why can't the even newer version open it? PLEASE help me. And, what do I do if my trial version has expired (I'm not home right now, so I can't check..) and I can't open it to fix it (if that's what I needed to do..)?
Note: at school we have CC, always updated. At home I have CS6, but downloaded a trial version of Muse. So, I would think the trial version would be the newest and CC not CS6. I don't know, though!
Note: is there a way to extend my trial version for, like, an hour, to retrieve this file? It would absolutely suck if I can't get it back now. I've spent a long time on this.

Could you please send me the muse file to [email protected] along with a link to this thread. If they're larger than 20Mb you can use a service like Adobe SendNow, Dropbox, WeTransfer, etc.
so that I may check and help in getting this resolved?

My MacBook air won't open internet, email, photos or print,it keeps asking for my keychain login, but I don't have a login for keychain

can anyone help, my MacBook air won't let me connect to Internet, open and read emails, won't open photos or print, it just goes into standby mode, I have to go to forced quit.
also now i keep getting login for keychain, but I don't have a login for keychain, but I can't get rind of it.
any ideas, or do I need to have a diagnostic run on it?
thanks

What's the precise text of your error message, please? (There's a few different ones I can think of that you might be getting.)

New pages won't open on iPad; new pages shows installed on air book but won't open. Related?

new pages program won't open iPad cloud documents without crashing--work around is to not open any documents in clouds, but it saves to clouds anyway; however, new pages program shows installed on air book but won't open new pages documents created on ipad without message "need to install a newer version of pages", which I have done. Are these two problems related?

Double tap Home button and delete Pages from multitask-bar.
Do a reset (Hold Sleep/Wake and Home buttons about 10 secs or more till Apple logo appears, ignore the Slide to Power Off that appears)
Note: You will not lose any data.
Try again with Pages.
If no joy, delete Pages and redownload again.

Ipad Air won't open in My Computer

Hi,
My Ipad Air won't open in My Computer on my PC. My Iphone and older Ipad open just fine, but my newer one won't. It shows up fine in Itunes.
I'm trying to get on it to see about copying photos. My PC has, for some reason, converted a bunch of my photos to the .ithmb suffix and they won't open on my PC. This whole episode is baffling. Any help would be appriciated.

Hello BHP11,
Thank you for the details of the issue you are experiencing with importing photos from your iPad Air.
First, if the AutoPlay dialog box does not open, the following article suggests to check your settings:
Import photos in Windows Vista or Windows 7
Import photos or video from your device to your PC:
Connect your iOS device to your computer. If the AutoPlay window appears, click "Import Pictures and Videos using Windows," then skip to step 4. If the "Import Pictures and Video" dialog appears, skip to step 4.
If the AutoPlay dialog doesn't appear, you might need to check your settings.
iOS: Import personal photos and videos from iOS devices to your computer
http://support.apple.com/kb/HT4083
If you are still not able to import photos, I recommend continuing with the following article:
iOS: Unable to import photos to computer
http://support.apple.com/kb/ts3195
Thank you for using Apple Support Communities.
Best,
Sheila M.

I downloaded my remote server from work. it is a citric remote. When I try to open it tells me it could be something I don't want or it needs an app. When I say open anyway it won't open

I can't open my remote server I downloaded on my MacBook air. It is a citrix remote. When I try to open I am told it could need and application or it may harm my computer. I click open anyway but it won't open. Warning sign keeps coming up.

Repairing the permissions of a home folder in Lion is a complicated procedure. I don’t know of a simpler one that always works.
Back up all data now. Before proceeding, you must be sure you can restore your system to its present state
Launch the Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the page that opens.
Drag or copy — do not type — the following line into the Terminal window, then press return:
chmod -R -N ~
The command will take a noticeable amount of time to run. When a new line ending in a dollar sign ($) appears below what you entered, it’s done. You may see a few error messages about an “invalid argument” while the command is running. You can ignore those. If you get an error message with the words “Permission denied,” enter this:
sudo !!
You'll be prompted for your login password, which won't be displayed when you type it. You may get a one-time warning not to screw up.
Next, boot from your recovery partition by holding down the key combination command-R at startup. Release the keys when you see a gray screen with a spinning dial.
When the recovery desktop appears, select Utilities ▹ Terminal from the menu bar.
In the Terminal window, enter “resetpassword” (without the quotes) and press return. A Reset Password window opens. You’re not going to reset the password.
Select your boot volume if not already selected.
Select your username from the menu labeled Select the user account if not already selected.
Under Reset Home Directory Permissions and ACLs, click the Reset button.
Select  ▹ Restart from the menu bar.

Keynote from Powerbook G4 won't open on Macbook Air

Apple wants fifty bucks to answer this question so I thought someone else may be willing to help. I have a Keynote I use my Powerbook (10.4)for, but I use a Macbook Air(10.6.6) for everything else. I'm going on a trip and don't want to lug both. I bought the right cable for the projector hook up but when I moved the doc over it won't open on the intel processor machine. What do I need?
Thanks in advance,

Do you have the same version of Keynote on both? I have never done this with Keynote, but I just did with Pages this morning. Created a document on my old G4 at home and opened it this morning on my Intel iMac at work and had no problem.
There are a few things you would want to make sure of. First like I said above, you will need the same version of Keynote on both, or at least a newer version on the MacBook Air then is on the Powerbook. Second, make sure that all the fonts are on both computers. And finally, make sure that on the Powerbook, you have check the Preference button to include Pictures and Movies in the file.

I have a mac air and an iMac and both have Pages. I use Pages on my air and save all documents to iCloud. I can see them on my iMac but it won't open with Pages. It becomes visible if I change it to open with preview but I can't interact with it.

I have an mac air and an iMac 5k - pages runs on both. I use pages on my air and save all my documents to iCloud drive. I can see the documents on my iMac but some won't open in pages which is bizarre? They will open if I change it to open with preview but then all I can do is read it - I can't add to the document - All I want is to be able to see all my documents on all my devices and to be able to have them sync so I can add to the documents from any of my devices. I also have an iPhone 6 and an iPadair2 but I would be happy just to have the iMac and macair sync for starters. I have folders within folders in my documents,. The folders which contain pdf's and individual files open OK . The one I am having difficulty with is the file which I use for ongoing correspondence - in other words it is quite long - I keep adding to it ( by copying letters in and letters out so I can see a sequential history of what has been going on by scrolling down ) in date order so that it could be 1 - 100 pages long - but I don't think the size is a problem. I don't understand why some folders can open and others not . Has anyone any suggestions please. I have been trying to get this to work for months since iCloud drive came in. It has got much better but it is still not good enough - or maybe it's me?

All I can suggest is that you open that file on the MBA and save it as a new file, then see if you can open the new one on the iMac.

Latest Keynote update won't open file. Says I need Keynote update! Why?

I'm working on an urgent Keynote presentation for work (yes, on Sat night!) from my boss's MacBook at home ... or, rather, I'm trying to. Keynote just won't open the Keynote file I created yesterday on a different MacBook (reading from USB key). It says I need the newer version of Keynote in order to open this file. I checked ... the version installed was the latest version, but just for good measure, I've just re-installed the update from the Apple site (with boss's permission, lol). No joy ... still returning the same error message. Insists the file version is newer than the version of Keynote I'm running.
Help, anyone?

You are alternating between the two versions of Pages:
Pages 5 and Pages '09.
Pages '09 can not open Pages 5, and Pages 5 alters/damages Pages '09 files.
Pages 5 is in your Applications folder.
Pages '09 is in your Applications/iWork folder.
Peter

Need to Install Safari 6.0.2 on a white Intel core duo iMac. Had to throw out 6.0.3 because of conflict with required software. Downloaded wrong version that was for Mountain lion (I am running 10.7.5). It installs but won't open.

Need to Install Safari 6.0.2 on a white Intel core duo iMac. Had to throw out 6.0.3 because of conflict with required software. Downloaded wrong version that was for Mountain lion (I am running 10.7.5). It installs but won't open, says it is for Mountian Lion.
Of course I can't throw it away since I get a message it's part of the sytem. I can show package contents and throw those away, but evidently not a good idea!!

Need to Install Safari 6.0.2 on a white Intel core duo iMac. Had to throw out 6.0.3 because of conflict with required software. Downloaded wrong version that was for Mountain lion (I am running 10.7.5). It installs but won't open, says it is for Mountian Lion.
Of course I can't throw it away since I get a message it's part of the sytem. I can show package contents and throw those away, but evidently not a good idea!!

MUSE won't open, needs AIR(??)

Similar Messages

Maybe you are looking for