Muse wont export my files in html and gives an error code when trying to upload to BC
Here is the error message I get but when we go to correct the file and replace it in Muse we still are getting this message.
Hi,
Can you provide me the url of your site ?
Also, Please do a fresh upload of your site files to your server and this time make sure that you are not missing on any of the files that was generated by Muse.
And you dont need to upload the .oam files onto your server separately as the files generated by Muse on exporting contains all the HTML , CSS and Javascript used in your Edge Animation.
Regards,
Rohit Nair
Similar Messages
-
Hi, I am using HP11 and iPlanet web server. When trying to upload files over HTTP using FORM ENCTYPE="multipart/form-data" that are bigger than a few Kilobytes i get a 408 error. (client timeout). It is as if the server has decided that the client has timed out during the file upload. The default setting is 30 seconds for AcceptTimeout in the magnus.conf file. This should be ample to get the file across, even increasing this to 2 minutes just produces the same error after 2 minutes. Any help appreciated. Apologies if this is not the correct forum for this, I couldn't see one for iPlanet and Web, many thanks, Kieran.
Hi,
You didnt mention which version of IWS. follow these steps.
(1)Goto Web Server Administration Server, select the server you want to manage.
(2)Select Preference >> Perfomance Tuning.
(3)set HTTP Persistent Connection Timeout to your choice (eg 180 sec for three minutes)
(4) Apply changes and restart the server.
*Setting the timeout to a lower value, however, may prevent the transfer of large files as timeout does not refer to the time that the connection has been idle. For example, if you are using a 2400 baud modem, and the request timeout is set to 180 seconds, then the maximum file size that can be transferred before the connection is closed is 432000 bits (2400 multiplied by 180)
Regards
T.Raghulan
[email protected] -
Why do I get "generic error" message when trying to upload a self-created, 1hr .wmv file?
I went through the forums and made sure that any blocks or copywrites weren't triggered by the file, it's clean and can be opened using a media player and other video editing software like windows MovieMaker. I keep getting "The importer reported a generic error" message and have no idea how to proceed. Can someone please help?
Re: Why do I get "generic error" message when trying to upload a self-created, 1hr .wmv file?
This ARTICLE starts with a checklist on setting up a computer to run PrE best, then goes into a series of links for tuning up one's computer and OS, and then links on troubleshooting.
There is also a link on posting all necessary info, to help others help you.
Without knowing much more about your system, it is impossible to say much beyond that WMV's are tough assests to work with, requiring a lot of CPU horsepower.
Good luck,
Hunt -
My compouter (PC) no longer recognizes my ipod (4th gen), it "sees" an unknowndevice and gives me error code 43. Please help.
Check for hardware issues
Try to restore your iOS device two more times while connected with a cable, computer, and network you know are good. Also, confirm your security software and settings are allowing communication between your device and update servers. If you still see the alert when you update or restore, contact Apple support.
Common errors: 1, 10-47, 1002, 1011, 1012, 1014, 1000-1020.
If still problem, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
Apple Retail Store - Genius Bar -
please help, i connect my phone to computer and gives me error code this i phone cannot be used because the apple mobile device is not started
http://support.apple.com/kb/HT1923
uninstall and reinstall
there is a complicated way to work with just the mobile device support but its simpler just to uninstall itunes and related components and then reinstall itunes
ur music will be fine, u will just lose the playlists. but ur mobile device support will be working again. -
I've spent 6 hours trying to update my iPad, and it doesn't work. It can't get past trying to back up, and just stops and gives an error code. I've deleted the backup, re-synced, and tried again and still no luck. What do I do now?
I am not running any antivirus software on my Mac, and I have the firewall shut off. Any other ideas? I have not problem downloading all other Apple software updates. I downloaded the latest iTunes software before starting the iPad update process.
-
The download assistant will not let me log in, and gives an error code of 100.
The download assistant will not let me log in, and gives an error code of 100.
Hi Hylton Reid,
Considering the error code 100, I would suggest you to follow the steps to troubleshoot Adobe Download Assistant.
Please refer the KB doc link and try the same:
Troubleshoot Adobe Download Assistant
Regards,
Anubha -
Hello. I am receiving "error codes" when trying to dowload songs. It charges me but the songs never download and I have restarted itunes and it does not automatically start downloading as instructed online. Help?
I don't know exactly what they said b/c they are nolonger on my screen. It said something to the effect of "incomplete dowload, there was an eror during the dowload of *Song*".
The songs purchased were showing in my purchased list with an "exclamation point" by them, which I believe indicates the download was incomplete. I restarted iTunes and the songs are no longer on my "Purchased list".
I was still charged after restarting iTunes -
I have a imac OSX 10.5.8 and get a java "error" message when trying to use a research tool on Morningstar.Java referred me to Apple but they had no updates. Any ideas? thanks.
Well I solved my problem.
What still doesn't make sense though is that dragging iTune audio files directly on to the iTunes application icon gave me the error message... which is why I originally discounted it as being a potential link problem. If I had been able to get files to open normally (i.e. without an error message) I would have known it was a simple link problem. Strange.
Anyway... relinking my folder of audio files did the trick.
If you don't already know how here are the steps...
iTunes > Preferences > Advanced > click on the "Change" button and browse to the folder that contains all of your iTunes audio files... that's it. -
Exported flash file as HTML and wont show up. I have the code, please help!
This is the code - It just comes up as a box and can't see anything!
<!-- saved from url=(0013)about:internet -->
<html xmlns="http://www.w3.org/1999/xhtml" xml:lang="en" lang="en">
<head>
<meta http-equiv="Content-Type" content="text/html; charset=utf-8" />
<title>our_house_flipbook_3</title>
<script language="JavaScript" type="text/javascript">
<!--
//v1.7
// Flash Player Version Detection
// Detect Client Browser type
// Copyright 2005-2008 Adobe Systems Incorporated. All rights reserved.
var isIE = (navigator.appVersion.indexOf("MSIE") != -1) ? true : false;
var isWin = (navigator.appVersion.toLowerCase().indexOf("win") != -1) ? true : false;
var isOpera = (navigator.userAgent.indexOf("Opera") != -1) ? true : false;
function ControlVersion()
var version;
var axo;
var e;
// NOTE : new ActiveXObject(strFoo) throws an exception if strFoo isn't in the registry
try {
// version will be set for 7.X or greater players
axo = new ActiveXObject("ShockwaveFlash.ShockwaveFlash.7");
version = axo.GetVariable("$version");
} catch (e) {
if (!version)
try {
// version will be set for 6.X players only
axo = new ActiveXObject("ShockwaveFlash.ShockwaveFlash.6");
// installed player is some revision of 6.0
// GetVariable("$version") crashes for versions 6.0.22 through 6.0.29,
// so we have to be careful.
// default to the first public version
version = "WIN 6,0,21,0";
// throws if AllowScripAccess does not exist (introduced in 6.0r47)
axo.AllowScriptAccess = "always";
// safe to call for 6.0r47 or greater
version = axo.GetVariable("$version");
} catch (e) {
if (!version)
try {
// version will be set for 4.X or 5.X player
axo = new ActiveXObject("ShockwaveFlash.ShockwaveFlash.3");
version = axo.GetVariable("$version");
} catch (e) {
if (!version)
try {
// version will be set for 3.X player
axo = new ActiveXObject("ShockwaveFlash.ShockwaveFlash.3");
version = "WIN 3,0,18,0";
} catch (e) {
if (!version)
try {
// version will be set for 2.X player
axo = new ActiveXObject("ShockwaveFlash.ShockwaveFlash");
version = "WIN 2,0,0,11";
} catch (e) {
version = -1;
return version;
// JavaScript helper required to detect Flash Player PlugIn version information
function GetSwfVer(){
// NS/Opera version >= 3 check for Flash plugin in plugin array
var flashVer = -1;
if (navigator.plugins != null && navigator.plugins.length > 0) {
if (navigator.plugins["Shockwave Flash 2.0"] || navigator.plugins["Shockwave Flash"]) {
var swVer2 = navigator.plugins["Shockwave Flash 2.0"] ? " 2.0" : "";
var flashDescription = navigator.plugins["Shockwave Flash" + swVer2].description;
var descArray = flashDescription.split(" ");
var tempArrayMajor = descArray[2].split(".");
var versionMajor = tempArrayMajor[0];
var versionMinor = tempArrayMajor[1];
var versionRevision = descArray[3];
if (versionRevision == "") {
versionRevision = descArray[4];
if (versionRevision[0] == "d") {
versionRevision = versionRevision.substring(1);
} else if (versionRevision[0] == "r") {
versionRevision = versionRevision.substring(1);
if (versionRevision.indexOf("d") > 0) {
versionRevision = versionRevision.substring(0, versionRevision.indexOf("d"));
var flashVer = versionMajor + "." + versionMinor + "." + versionRevision;
// MSN/WebTV 2.6 supports Flash 4
else if (navigator.userAgent.toLowerCase().indexOf("webtv/2.6") != -1) flashVer = 4;
// WebTV 2.5 supports Flash 3
else if (navigator.userAgent.toLowerCase().indexOf("webtv/2.5") != -1) flashVer = 3;
// older WebTV supports Flash 2
else if (navigator.userAgent.toLowerCase().indexOf("webtv") != -1) flashVer = 2;
else if ( isIE && isWin && !isOpera ) {
flashVer = ControlVersion();
return flashVer;
// When called with reqMajorVer, reqMinorVer, reqRevision returns true if that version or greater is available
function DetectFlashVer(reqMajorVer, reqMinorVer, reqRevision)
versionStr = GetSwfVer();
if (versionStr == -1 ) {
return false;
} else if (versionStr != 0) {
if(isIE && isWin && !isOpera) {
// Given "WIN 2,0,0,11"
tempArray = versionStr.split(" "); // ["WIN", "2,0,0,11"]
tempString = tempArray[1]; // "2,0,0,11"
versionArray = tempString.split(","); // ['2', '0', '0', '11']
} else {
versionArray = versionStr.split(".");
var versionMajor = versionArray[0];
var versionMinor = versionArray[1];
var versionRevision = versionArray[2];
// is the major.revision >= requested major.revision AND the minor version >= requested minor
if (versionMajor > parseFloat(reqMajorVer)) {
return true;
} else if (versionMajor == parseFloat(reqMajorVer)) {
if (versionMinor > parseFloat(reqMinorVer))
return true;
else if (versionMinor == parseFloat(reqMinorVer)) {
if (versionRevision >= parseFloat(reqRevision))
return true;
return false;
function AC_AddExtension(src, ext)
if (src.indexOf('?') != -1)
return src.replace(/\?/, ext+'?');
else
return src + ext;
function AC_Generateobj(objAttrs, params, embedAttrs)
var str = '';
if (isIE && isWin && !isOpera)
str += '<object ';
for (var i in objAttrs)
str += i + '="' + objAttrs[i] + '" ';
str += '>';
for (var i in params)
str += '<param name="' + i + '" value="' + params[i] + '" /> ';
str += '</object>';
else
str += '<embed ';
for (var i in embedAttrs)
str += i + '="' + embedAttrs[i] + '" ';
str += '> </embed>';
document.write(str);
function AC_FL_RunContent(){
var ret =
AC_GetArgs
( arguments, ".swf", "movie", "clsid:d27cdb6e-ae6d-11cf-96b8-444553540000"
, "application/x-shockwave-flash"
AC_Generateobj(ret.objAttrs, ret.params, ret.embedAttrs);
function AC_SW_RunContent(){
var ret =
AC_GetArgs
( arguments, ".dcr", "src", "clsid:166B1BCA-3F9C-11CF-8075-444553540000"
, null
AC_Generateobj(ret.objAttrs, ret.params, ret.embedAttrs);
function AC_GetArgs(args, ext, srcParamName, classid, mimeType){
var ret = new Object();
ret.embedAttrs = new Object();
ret.params = new Object();
ret.objAttrs = new Object();
for (var i=0; i < args.length; i=i+2){
var currArg = args[i].toLowerCase();
switch (currArg){
case "classid":
break;
case "pluginspage":
ret.embedAttrs[args[i]] = args[i+1];
break;
case "src":
case "movie":
args[i+1] = AC_AddExtension(args[i+1], ext);
ret.embedAttrs["src"] = args[i+1];
ret.params[srcParamName] = args[i+1];
break;
case "onafterupdate":
case "onbeforeupdate":
case "onblur":
case "oncellchange":
case "onclick":
case "ondblclick":
case "ondrag":
case "ondragend":
case "ondragenter":
case "ondragleave":
case "ondragover":
case "ondrop":
case "onfinish":
case "onfocus":
case "onhelp":
case "onmousedown":
case "onmouseup":
case "onmouseover":
case "onmousemove":
case "onmouseout":
case "onkeypress":
case "onkeydown":
case "onkeyup":
case "onload":
case "onlosecapture":
case "onpropertychange":
case "onreadystatechange":
case "onrowsdelete":
case "onrowenter":
case "onrowexit":
case "onrowsinserted":
case "onstart":
case "onscroll":
case "onbeforeeditfocus":
case "onactivate":
case "onbeforedeactivate":
case "ondeactivate":
case "type":
case "codebase":
case "id":
ret.objAttrs[args[i]] = args[i+1];
break;
case "width":
case "height":
case "align":
case "vspace":
case "hspace":
case "class":
case "title":
case "accesskey":
case "name":
case "tabindex":
ret.embedAttrs[args[i]] = ret.objAttrs[args[i]] = args[i+1];
break;
default:
ret.embedAttrs[args[i]] = ret.params[args[i]] = args[i+1];
ret.objAttrs["classid"] = classid;
if (mimeType) ret.embedAttrs["type"] = mimeType;
return ret;
// -->
</script>
<script language="JavaScript" type="text/javascript">
<!--
// Globals
// Major version of Flash required
var requiredMajorVersion = 10;
// Minor version of Flash required
var requiredMinorVersion = 0;
// Revision of Flash required
var requiredRevision = 2;
// -->
</script>
</head>
<body bgcolor="#999999">
<!--url's used in the movie-->
<!--text used in the movie-->
<script language="JavaScript" type="text/javascript">
<!--
var hasRightVersion = DetectFlashVer(requiredMajorVersion, requiredMinorVersion, requiredRevision);
if(hasRightVersion) { // if we've detected an acceptable version
// embed the flash movie
AC_FL_RunContent(
'codebase', 'http://download.macromedia.com/pub/shockwave/cabs/flash/swflash.cab#version=10,0,2,0',
'width', '730',
'height', '570',
'src', 'our_house_flipbook_3',
'quality', 'high',
'pluginspage', 'http://www.adobe.com/go/getflashplayer',
'align', 'middle',
'play', 'false',
'loop', 'false',
'scale', 'noscale',
'wmode', 'window',
'devicefont', 'false',
'id', 'our_house_flipbook_3',
'bgcolor', '#999999',
'name', 'our_house_flipbook_3',
'menu', 'true',
'allowFullScreen', 'true',
'allowScriptAccess','sameDomain',
'movie', 'our_house_flipbook_3',
'salign', ''
); //end AC code
} else { // flash is too old or we can't detect the plugin
var alternateContent = '<p>This content requires version '
+ requiredMajorVersion + '.' + requiredMinorVersion + '.' + requiredRevision + ' '
+ 'or higher of the Adobe Flash Player.</p>'
+ '<a href="http://www.adobe.com/go/getflashplayer/">Get Flash</a>';
document.write(alternateContent); // insert non-flash content
// -->
</script>
<noscript>
This content requires the Adobe Flash Player.
<a href="http://www.adobe.com/go/getflashplayer/">Get Flash</a>
</noscript>
</body>
</html>Hi MooksGoo_howdy
There's a fair bit of discussion of this topic in http://forums.adobe.com/message/4635231#4635231.
In general you have to manually create the file/folder structure the SWF expects in the hosting environment. There's no way for Muse to know what files the SWF depends upon, if any, and where they need to be located.
A SWF that has external dependencies will never work in Muse Preview or Muse Preview in Browser, but can be made to work on a published/uploaded site by manually using an FTP client to create the file/folder structure the SWF requires.
Regards
Anshul Sharma -
Finder wont Delete and Gives me Error Code -1407
So, i'll Just get right into it. About a week ago I installed a MAC NTFS read/write driver (file located here: http://macntfs-3g.blogspot.com/) or whatever in order to transfer a 4gb ISO file over to an NTFS external HD. It was only after this that I started to notice some weird stuff happening.
1- All of the stuff on my normal External HD (Formatted in FAT 32) that was put there before the driver was installed wont delete, but New Stuff Will.
2- There is a weird file in my trash bin that has weird and unrecognized characters in the title and says it was created in 1903, but it is 0kb in size. And it wont delete. (I have tried Secure Delete)
3- whenever i try to delete It gives me a message that says: "Sorry, the operation cannot be completed because an unexpected error has occurred. Error Code -1407"
I have tried Secure Delete on the files, like I said, and I've ran OnyX. Though It hasnt seemed to have worked. Also, when I transfer the files that wont delete over to a windows machine, they wont play (Some of these files are AVI video files) and say the files are corrupted. (I've tried VLC on the files on the windows machine) But, the files all play normally on my own Mac Machine. I just now got fed up with all of this and decided to ask for some help. Anyone got any Idea whats going on? Whats the Error Code -1407 mean? (I have uninstalled the driver and its all still messed up)I don't know about your first issue for sure-more details could help.
EDIT: Try opening /Applications/Utilities/Terminal, and typing the blue text in (copy and paste it):
ls -aleO@
DON'T press enter yet. Type a space, and drag a file you can't delete into Terminal. You'll see its path displayed onscreen. Press enter, and paste the results into a reply.
As to your second 2 problems, I would suggest, if you are running Boot Camp, booting into windows, and running chkdisk.
Good luck!
P.S. Welcome to Discussions!
Message was edited by: joshz
Message was edited by: joshz -
Photoshop CS6 and PS CC error message when trying to open file
The following error occurs when I try to open a file from Bridge of Windows Explore:
"The procedure entry point
?ProposeSearchBounds@StructuralImageEditing@@YA?AVBox@I@EA
BV?$point2_J@gil@boost@@AEBV21@M@Z could not be located in
the dynamic link library PatchMatch.dll"
This started happening latge in the day recently and usually a reboot solved the problem
but i am getting this every time I try open an image. What is the problerm and what are
the solutions?
Thank you johnJust thought I would update. I reinstalled PS CS6 since I had the disk available and the error message did not come back. I then launched Bridge CC and I was able to launch from Bridge without the error message but the file opened in PS CS6 so I checked my file associations in Bridge CC and they were all set to CS6 (odd) but I changed the associations for jpeg and NEF to PS CC and I tried to launch the files. ERROR MESSAGE it is the same one as I noted in yesterdays message. Any suggestions?
When I did the reinstall of CS6 it was right over the top of PS CS6. Should I do the same with CC? How do I do that? Just download from Creative Cloud Manager?
Thanks
John -
Iphone and Windows Live Gallery error code when trying to edit
Most of my photo's come from my iPhone 4gs. Fairly resently i haven't been able to edit photos in Windows Live Gallery. Especially Rotating pictures. I get an error code "file location" - Error code: (0x80070057)
oSCommerce is PHP *dynamically driven* with content supplied from a database.
Content is parsed by the server.
BUILDING DYNAMIC SITES in DW
==============================
Get one of the following testing servers for your OS and follow the installation instructions.
WAMP for Windows
http://www.wampserver.com/en/
XAMPP for Windows
http://www.apachefriends.org/en/xampp-windows.html
XAMPP for Mac
http://www.apachefriends.org/en/xampp-macosx.html
MAMP for Mac
http://www.mamp.info/en/downloads/index.html
Setting up a PHP environment in Dreamweaver
http://www.adobe.com/devnet/dreamweaver/articles/setup_php.html
Building your first dynamic website – Part 1: Setting up your site and database connection
http://www.adobe.com/devnet/dreamweaver/articles/first_dynamic_site_pt1.html
Nancy O.
Alt-Web Design & Publishing
Web | Graphics | Print | Media Specialists
http://alt-web.com/
http://twitter.com/altweb -
Error message when trying to upload a pdf file to a form
A user was trying to upload a pdf file to a form I created (Contractor Vanpool Application Form). The parameters I set, was that it had to be a pdf form, less than 20MB and a single file. She met these parameters, but when she hit the submit button, she received this dialogue box message: Warning: JavaScript Window - File Attachments are not supported in FormsCentral PDF forms. Please contact the form author to send the file attachments another way. This dialogue box prevented her from even getting as far as selecting the file and uploading. Another user was succesfully able to upload a form, so I know this is working. So I changed the parameters to allow multiple files in any format, and she still had a problem.
She states is using windows 95, Internet Explorer. Help, MichelleIn Form Central, when I add a field, I select the Add File Attachment icon (see screen shot below - it is the 10th icon from the left, the paperclip over a sheet):
Then it allows me to fill in the field, describing the file to upload, and the properties to the right defining the file size limit, type of file and other properties. This is all done through formscentral, thus allowing a user in my form to upload a file that is attached to the form when submitted. -
Help!!!!!! I'm about going out of my mind....Need help loading music to my 1st generation I pod and keep getting error 50 message. I have windows xp and loaded new software last night. This all started when I upgraded to itunes 10 awile ago. My computer recognises my ipod and I think its syncing don't know...My library is intact and can't load any music from my library...purchases...or gene ....itunes 10 wiped my custom play list...and now nothing...I used ipod reset utility to restore my ipod to factory settings and still nothing....I don't have alot of computer knowledge and need someone to walk me threw on what to do. I'm at a loss. And about ready to give up on Apple and the I-tunes experiense....I am in dire need. Help!!!!!!!!!!!!
Hi and welcome to the forums!
A couple of places for you to visit: Blackberry 101 Tips & Tricks
See if this kb helps: http://www.blackberry.com/btsc/microsites/search.do?cmd=displayKC&docType=kc&externalId=KB12847&slic...
I'm not sure that you saw the error msg. included in the kb, but it discusses removing .msi files from previous installations of DM. Post back and let us know how it goes.
Happy to have you here!
IrwinII
Please remember to "Accept as Solution" the post which solved your thread. If I or someone else have helped you, please tell us you "Like" what we had to say at the bottom right of the post.
Maybe you are looking for
-
Hi everyone, Owing to the pathetic hard drive in my Pismo, I've convinced myself to upgrade. I've got the original 6GB IBM TravelStar DARA-206000 drive, and I'm aiming for something around 30GB. I thought about the Hitachi TravelStar DK23CA-30, which
-
Hello, Does anyone no of a way to check that the computer on a network are syncing their mobile directories properly? A report stating which users are uptodate would be really nice?? Many thanks for any help, David Lee
-
Calibrating and saving a profile for a monitor then loading it for another
How do you save a calibration setting and then see it in the list of loadable calibrations for another monitor? I have identical dual monitors, but cannot seem to figure out how to share a calibration setting between the two.
-
On a workstation, I need to set a FLEX3 project's compiler services argument to the services-config.xml file on a separate server (multiple instances of CF8) on our network. Any suggestions on how to 'map' to that file's path? Thanks
-
hi How can I print a long line. for exmple 0123456789012345678901234567890123456789012345678901234567890123456789 if i print a textarea with this content i get a printout that looks like this: 012345678901234567890123456 do i have to set anything so