Music app throws back to track selection screen
Sometimes when i choose a track in music app, my ipod 4g freezes for a couple of seconds, and then throws me back to song selection screen. I reinstalled iOS and synced all music again, but it still happening. It is really annoying. Any ideas?...
- Restore to factory settings/new iOS device.(not clear if" I reinstalled iOS and synced all music again, " iwas this)
If still problem, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
Apple Retail Store - Genius Bar
Similar Messages
-
How can I get my kindle app icon back on my home screen. After updating to iOS 8.0.2, my Kindle icon was gone. Now I have to keep going to the App Store to open Kindle, but I cannot get it on my home screen.
for the Points
7:07 pm Sunday; September 28, 2014
iMac 2.5Ghz i5 2011 (Mavericks 10.9)
G4/1GhzDual MDD (Leopard 10.5.8)
MacBookPro 2Gb (Snow Leopard 10.6.8)
Mac OS X (10.6.8),
Couple of iPhones and an iPad -
Music App... Shuffle, lock screen ect.
A whole bunch of items that I think apple really screwed up with the release of ios7.
1) What happened to shuffle? They changed the icon which is confusing in items to use. When you want to shuffle a certain album by an artist you simply cannot. It will shuffle every song by the artist. I noticed recently itunes starting doing this as well.
2) Album organization. It used to be simple and easy to use. Artist>Album>Songs. It is still this format, but to get to a certain album you have to go through every song of the album before it. Extremely annoying to navigate and painful to the eyes. Another feature i have no idea why they changed.
3) Music app from the lock screen. Now that the whole screen swips to unlock, the music controls move as well. Which make its difficult to change the volume, ski tracks difficult as the entire screen moves thinking you are trying to unlock the phone.
4) Controls all at the bottom when unlocked. They moves shuffle, repeat, and track scrolling down to the bottom for some reason. Which crams every button in a tight space making it very easy to hit the wrong button.it works fine on my phone. try to check access Settings- Control center - make sure Access on Lock Screen and Access within Apps are On. while on lockscreen mode, try swiping up from the bottom of the screen to view control center. try to play a song, then swipe it down to hide the control center. u will see there music playing while on the lockscreen and can pause it from there.. hope this will help.
-
Throwing error msg in selection screen
Hi all,
I want to throw one error message in selection screen .
This message is of more than 1000 chars. and i want to show these 1000 chars in a pop up window and when i press 'TICK' mark, it should stay only in the selection screen . It should not go to the output screen and it should not leave the transaction either..
Can anyone help me in this by providing the coding for this..
Regards,
ShanthiHi Shanthi,
Your requirement is fulfilled by standard SAP message processing. Through message maintenance (TCode SE91), you define a message with a long text.
Let us say the message class is ZSHANTHI and the message number is 025. Besides the message short text you defined say 'Something wrong with &. Refer Long Text', un-check the checkk-box 'Self Explanatory', choose this message number and click on 'Long Text' button on the application toolbar. You will get long text editor and you can compose your 1000 lines or even 1000 pages story there.
Now let us see what you need to do in the report program. Your requirement is 'Issue the error message. When user hits Tick, display long text in a modal window and later stay in the same selection screen'.
You just issue this message in AT SELECTION-SCREEN event as:
MESSAGE e025(ZSHANTHI) WITH 'requirement'.
The error message will display on the status bar and when user hits the message X button, the long text with your story will appear in a modal box and still selection screen stays.
If your client is adamant in having only 'Tick' mark (this sucks me), you can add DISPLAY LIKE 'S' addition to the above message statement. But this addition works only 4.7 upwards.
If you want to issue this error message in list processing events like START-OF-SELECTION, then, you need to issue the following statements:
MESSAGE s025(ZSHANTHI) WITH 'still weird requirement'.
Note the message type 'S' above.
LEAVE LIST-PROCESSING.
Hope this helps.
Regards
Suresh Radhakrishnan -
IPad music app does not show track artists in compilations
Hello community,
i have a problem with my iPad's music app. When browsing compilations, it does not show the artist of each track like my iPhone does. Both devices are sync'ed with the same iTunes library, and the 'Part of a compilation' flag is set correctly to the corresponding tracks.
Please let me illustrate the problem with a few screenshots.
The iPhone shows this compilation correctly as 'Various Artists' and thus displays the track's artists in each line below:
In contrast, the iPad's music app does not seem to identify the compilation correctly. The artist is not shown as "Various Artists" like on the iPhone, but the artists of the first track is wrongly used instead. Furthermore, the artist of each track is not shown in the list on the right side:
The setting "Sort album by artist" is turned on on both devices.
Any ideas what could be wrong?
Thank you!It's not you, it's the iPad's iOS. The Music app in iOS 5 for the iPad is horrendous with several UI fails:
- No category for Compilations
- Incorrect/ Missing Artist for Compilations
- No lyrics
- No indication of track number within a group of tracks (e.g. "18 of 37")
- Sporadic indication of which track is playing while looking at a list
Hopefully these things get corrected in iOS 6, but for now you'll have to bear with it. You can voice your concern here:
http://www.apple.com/feedback/ipad.html -
Resetting back of a selection screen in a webpage
Hi All,
I have a requirement wherein once i am trying to run a report on Web UI(Web Page Report deveoped on WAD). Once i click on the report link it takes me to the link of a selection screen wherein i input certain values and then click on the run report button to execute the report. The issue occuring here is once i enter the values in the selection screen and click on the run report, the report output opens fine and in a correct way in a new window but the selection screen resets back to a strange kind of a page wherein i am no longer able to select different values. It shows a blank kind of a screen which certain tabs on the top of the page showing exceptions,variables,etc. I need to keep the selection screen intact without letting it get reset to that kind of a page so that i can make different selections on that. What happens in the above case is when i click on the back button on that webpage with strange view, the selection screen comes back.I dont want this transition to happen and want to keep the selection screen intact. Please advise.
Thanks!
Subhra Ghosh.hi
good
try this
In the same way that you can define a screen as a subscreen in the Screen Painter, it is now possible to define selection screens as subscreens in an ABAP program:
SELECTION-SCREEN BEGIN OF SCREEN scrn AS SUBSCREEN
[NO INTERVALS]
[NESTING LEVEL n].
SELECTION-SCREEN END OF SCREEN scrn.
go through this link
http://help.sap.com/saphelp_nw2004s/helpdata/en/e7/deb237b9a9a968e10000009b38f8cf/content.htm
http://sap.niraj.tripod.com/id40.html
thanks
mrutyun^ -
Nokia music app..theme dissapeared from selections
In Latino I don't see Bolero anymore
AND I took Salsa Tropical off line and can't get it back.
Wazzzup!?
thnxHi tumchaaditya,
Thanks for your contribution and welcome to the forum
If Nokia Music is available for your region it will be in the Nokia Collection on Marketplace when accessed through the phone.
Hope this helps,
Kosh
Press the 'Accept As Solution' icon if I have solved your problem, click on the Star Icon below if my advice has helped you! -
My app folders keep dissapearing or the app go back and fill the screen out of the folders
My folders keep dissapearing, not all but a lot. sometimes the apps fill up the sreen after the folder leaves other times I cannot find them.
Restart or reset your iPhone, iPad, or iPod touch - Apple Support
Working now? If not, ask yourself what may have changed just preceding the misbehavior? Add and App? Update one? Update iOS? Anything.
Use iTunes to restore your iOS device to factory settings - Apple Support
ÇÇÇ -
Hi all, on my 3GS while in settings, then store, at automatic downloads for music, apps, and books I have selected on, then a couple of seconds later the selections go right back to off by themselves, what am I doing wrong here? Thanks...
Ok, hey folks I figured this out, I had recently changed my iTunes account password, but my iPhone had the old password set in it, once I entered the correct password into the iPhone I was able to change the selections in automatic downloads, i went over to my MacBook Pro and downloaded a free song and app as a test and both showed up right any on the iPhone,
hope this helps anyone with the same problem,
Steve... -
The Music App in iOS7 is an annoying step back - Why?
As a whole, I appreciate the design and functionality changes within iOS7. It's breathed new life into the OS, given people something new to explore and talk about.
But Apple seem to have lost their way when it comes to the basics of playing some music on an iPhone. It's become fiddly, complicated, fragmented and regressed - iOS6 had the right balance
Why? Well, based on personal experience and comments made by colleagues, friends etc, the most regular complaints are..
-- Why have users been forced to listen to podcasts in the separate app? Apple - not everyone listens to spoken word podcasts. We listen to music mixes etc.. Having those mixes in the SAME PLACE as our other music makes it a more seamless experience. Switching apps is a ball-ache
-- Why can't we delete entire Albums in one swipe any more? Track by track, is again, a ballache
-- The controls to scrub through tracks are tiny and barely usable. iOS6 allowed you to scrub and see the slider under your finger - now you have a tiny red line that leads to inaccurate movement thru tracks
-- Music control while the phone is locked is very very frustrating in iOS7 in a few ways...
1) iOS6 - you could double click the home button, the controls (large) would appear on screen. You could hit play and instantly listen to some shuffled music. In iOS7 - you have to swipe up,hit play then hope it starts a track (which it doesnt always do)
2) The above isnt too much of an issue when the phone is on a desk in front of you, or in your hand... but when you're using the phone while running, the clunky process is unhelpful and unintuitive. If you use an arm band to hold your iphone while you exercise try dragging the control centre up, selecting the music app and playing a track while you've got a plastic cover over the screen - it's nigh on impossible
3) You cant enter the music app unless there's a track already playing - why isnt Music.app quickly accessible from Control Centre? I'd use that more than a stopwatch
3) There's no indication that a track is playing unless you open control centre. Where has the triangular 'play' icon gone in the taskbar?
-- In Album view, the coverart icons are too large- takes longer to scroll thru a collection of albums, especially as the alphbetical slider on the right hand side of the screen is smaller and omits every other letter
Overall, the app is flawed / too skewed toward the purchase of media via the iTunes store
I doubt very much whether Apple will read this post or listen to customer feedback and deviate from their design vision. Apple regularly claim they identify a customer need and fulfill it - would be good if they were good to their word on this particular aspect of iOS7Which is a horrible app that shows every **** podcast you subsctribe to, whether or not you have a new episode, and doesn't let you arrange them properly to only show unplayed episodes. It's also a completely needless app since the Music app handles podcasts just fine.
-
I am using an iPAD2 with 32gbytes on iOS8.1.1.
After upgrading to iOS8.0, the movies I had on my iPAD no longer would play. When I select a movie, it changes to the play screen, then immediately flips back to the selection screen. The movies are in the :movies" category. I tried to reclassify them to "home movies" under the INFO option, but it is grayed out.
I did just copy another movie and it automatically was classified as a "home movie" and it play just fine. My guess is this has something to do with the category it is in. However, I cannot change the categories on the previous movies.
Any help is appreciated.Can you record and play new VMs?
Can you sync them to your computer?
Try:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from a back that was made then the VM played back. See:
iOS: How to back up -
How to clear parameters defined in selection screen on back button
Hi,
I have a report with parameters, few being input fields, and check boxes. After report is executed when user selects the back button, the selection screen is displayed again but with the old selection values. I want to clear them.
So in the Initialization even I added the code to clear all these parameters;
CLEAR: p_aaa, p_bbb, p_ccc.
I debugged and control passes through this code but still the fields are not cleared and they retain the old input values.
How to clear them ?
thnks>
Rob Burbank wrote:
> Yes he did. My mistake.
>
> But isn't this what he wants? To clear the Selection screen so that something has to be entered?
>
> Rob
IMO, he only wants to clear the selection screen parameters on the click of 'BACK' button
in the list screen. If the OP clears the selection screen variables in AT SELECTION-SCREEN OUTPUT
even, the values assinged to the selection parameters in the INITIALIZATION and with the DEFAULT addition of the PARAMETERS and SELECTION-OPTIONS statements will also be overwritten even when the report is executed for the
first time.
-Rajesh. -
How to go back to the previous selection screen window?
I have a selection screen and I have a button that calls a basic report and displays it on screen 0. The basic report is displaying however when I push the back button the program exits.
If I use "set screen 0" and if I press back button, the program goes to the code. It does exit.
If I use "leave to list processing" and if I press back button, the screen is just stuck on that screen 0 forever.
What I want is to go back to the selection screen window when I press the back button at the top.
<b>Pls help. Im a newbie. Thanks people. </b>
at selection-screen.
case SY-UCOMM.
when 'BTN1_PUSH'. " Calls Plain Report
set screen 0.
perform plainreport.
when 'BTNEXIT_PUSH'.
leave program.
endcase."Hi Jabbar,
The reason it is exiting the program is because you are using set screen.
Try the following instead:
at selection-screen.
case SY-UCOMM.
when 'BTN1_PUSH'. " Calls Plain Report
call screen 0.
perform plainreport.
when 'BTNEXIT_PUSH'.
leave program.
endcase."
Think of the call screen command as a chain that the program follows and exits the previous. When you say set screen you are leaving the history in the program and it will always go back to the last screen it remembers which is why you were stuck in screen 0. -
Ho to back on selection screen using BACK button
Salute.
I have a program which contains 3 screens:
1st -- selection screen.
2nd -- my screen, I called it 1002, When I press F8 button on I get on it. I am using cl_gui_alv_grid there with my own buttons. So when I press MY OWN the save button I get the 3d screen
3d -- my own screen with some labels (screen name 1001).
So when i press BACK button on the third screen I want to back on selection screen and skip second screen, but I can't, I think the problem is in the cl_gui_alv_grid because I use custom grid handler:
METHOD handle_user_command.
DATA :
ls_selected TYPE lvc_s_roid,
lt_selected TYPE lvc_t_roid.
CASE e_ucomm.
WHEN 'QSAVE'.
PERFORM save_data.
CALL SCREEN 1001.
WHEN OTHERS.
ENDCASE.
ENDMETHOD. "handle_user_command
Thank You.
Edited by: kernel.panic on Nov 24, 2009 6:31 AMHi Kernal,
To go back to the First Screen (Selection Scree) use
LEAVE TO SCREEN 0. " This makes the Program to go back from where it had started
or Create a Tcode for your program
CASE e_ucomm.
WHEN 'BACK'.
LEAVE TO TRANSACTION 'YOUR TCODE HERE' . " This will take you back to your Selection Screen
WHEN 'QSAVE'.
PERFORM save_data.
CALL SCREEN 1001.
WHEN OTHERS.
ENDCASE.
Cheerz
Ram -
Selection-screen problem:need to go back to selectionscreen not source code
Hello experts,
Please help me on my dillema. I have 2 reports, zreport1 and zreport2. Now, zreport1 submits
values via selection-screen to zreport2. Now here is the problem, when I press 'BACK' on the
selection-screen of zreport2(rememeber we used submit statement via selection-screen on zreport1)
instead of going back to the selection-screen of zreport1 it goes to the source code of zreport1 which
is wrong. And there are 2 selection-screens on zreport1 depending on the user if he is controller or not.
So what I need to do here is that whenever I press 'BACK' either I'm adding or modifying or displaying records
it should go back to whatever screen I called in zreport1.
Here's a diagram.
ZREPORT1**
if v_controller = 'X'
display selection-screen 1500
else
display selection-screen 500
endif.
if user wants to add records, submit values from zreport1 to zreport2
and return via selection-screen.
*same goes for edit option.
if user wants to display, get all records then display in ALV.
ZREPORT2**
So lets assume user decides not to add records and decides to go back. so he presses
the BACK button in selection-screen of zreport2. Now here's the nasty part, instead of going back to either
selection-screen 500 or 1500 in zreport1, it goes to the source code of zreport1!. I hope I explained it clearly.
Again, thanks a lot guys for your help!Hi,
Try this
START-OF-SELECTION.
*----------Sumbit Report-------*
Sumit Report......AND RETURN
*----------Check Condition & back to select screen-------*
IF condition.
MESSAGE s207(zusm_gen) DISPLAY LIKE lc_e .
EXIT.
ENDIF.
Set something in the memmory.
this can be used to check the completion of the report.
if the 2nd report executed porperly then u further execute the code.
If u dont have any thing to execute after sumbit report
then u can do is.
START-OF-SELECTION.
*----------Sumbit Report-------*
Sumit Report......AND RETURN
MESSAGE s207(zusm_gen) DISPLAY LIKE 'S' .
EXIT.
Message was edited by: Manoj Gupta
Maybe you are looking for
-
Help! My iTunes occasionally re-imports all of my media erasing my playlists (and it takes to long to do this). I believe this problem is related to the latest update to Safari Ver 4.1.3. My Safari crashes a lot now (about every other day). How do I
-
I am on Sparc Sun Os 5.9. I was already using Acrobat reader 5.0.5 and now I wanted to installed 8. I downloaded from adobe site, AdobeReader_enu-8.1.1-1.sparc.tar.gz and installed it using ./INSTALL script using root account. I received this error,
-
How to conditional color text in a field
I've searched the Internet and this forum for this, but couldn't find a answer I could use. In my dataset I have a field that contains a Colorcode. Depending on this code, an onther field in my data has to be colored. How do I do this? Say the field
-
How to package other jar files into one jar?
How to package other jar files into one jar? How can i get the class in the inner jar file?
-
Using hacked Flash Player in unsupported Power Macs ===
Understandably, the current versions of the Adobe Flash Player no longer support Power Mac G5 (pre-Intel) Macintosh computers, as even Appple has dropped support for these "legacy" machines. There is available a hacked version of the Adobe Flash Play