Music App with Both Chord and Solo Keyboards?

For a while now, I've been looking for an iPad app that I'd think there'd be dozens of, but I've yet to find one.
It would be a simple music composing app that lets you play a melody line on a keyboard while simultaneously playing a chord (via button or second keyboard) from a (modifiable) selection of chords. So, one hand composing melody, one finger (on the other hand) playing supporting chords.
It seems like it'd be a fairly intuitive way to quickly save rough musical ideas, but maybe it's just me.
Most of the apps I've downloaded let you make, play and/or record a sequence of chords, but there's no way to play a melody at the same time. I'd like the ability to control the playing of the melody and chords...tinker around with the combinations, you know?
The closest I've found is "SongSynth," but that just plays a push-button chord off the same note you're playing on the (only one-octive) keyboard. What if I want to play a G note in the melody over a chord that isn't rooted in G?
Anyway, hope this makes sense, and hope this app exists and you can steer me to it!

I agree!
It's hard enough to juggle earpieces, expensive hardware and belts (etc) for keys (etc) with software when exercising.
Particulary since most running log apps can't control Playlists directly.
Which to launch, then, start first…!
The simpler and better-integrated such handling is, the better.
It's tempting to think the changes are part of Apple's bigger plans to 'break up' iTunes, which has become unweildy, given all the functionality it's had to grow to encompass - when compared with a simple audio manager ten years or so ago.

Similar Messages

  • HT201210 my phone won't turn on after trying to restore it with iTunes what do i do??!! also it just has the blue music app with an arrow and power cord on it. HELP!

    My phone will NOT turn back on after trying to restore it with itunes. It just has the blue music app with an arrow & the usb side of the power cord on it.
    Help me please!!

    Hello Sean,
    It sounds like you are constantly needing to restore your phone because it keeps going into recovery mode. Usually putting a device into recovery mode and restoring it can help isolate an issue to your iPhone hardware if an issue persists afterwards. I would try manually putting it into recovery mode and restoring it 1 more time:
    If you can't update or restore your iOS device
    http://support.apple.com/kb/HT1808
    If that does not resolve it the symptoms indicate to me that it is a hardware issue causing this to happen and would seek service for it:
    iPhone Repair - Other Repairs
    https://www.apple.com/support/iphone/repair/other/
    Thank you for using Apple Support Communities.
    All the best,
    Sterling

  • Multi-folio app with both portrait and landscape orientation

    Can we create a multi-folio app that contains both portrait and landscape orientation folios?

    A multi-folio app can have any mix of portrait, landscape, or dual-orientation folios in it. The only requirement is that for a specific folio all articles in it share the same orientation setting.
    Neil

  • So i bought the 9.99 a month photoshop (with lightroom) and then installed CC when i went to the app tab both PS and LR said "try" instead of install is that how setup usually goes? or well it ask me later for serial numbers?

    so i bought the 9.99 a month photoshop (with lightroom) and then installed CC when i went to the app tab both PS and LR said "try" instead of install is that how setup usually goes? or well it ask me later for serial numbers?

    Oscarf16161909 for information on how to resolve the connection error preventing the active membership from authorizing please see Sign in, activation, or connection errors | CS5.5 and later.  If you have any questions regarding the steps listed in the document you are welcome to update this discussion.

  • Flash CC 2014 fees associated with publishing an app on both android and IOS platforms

    I have a client thats wants an app done, the app would best be created in Flash CC 2014 as it based to run like a book with buttons on each page for a viewer to click. The viewer clicks the button of thier choice on each page and at the end of the book if the score is over 1000 a bonus page will appear, if its under it will say try again.
    Client needs this in both IOS and Android so I need to know the extra fees associated with this
    my fee for creating ( I know)
    Android certificate fee?
    IOS developer fee 99.00 ( I know)
    Did I miss anything is there a fee to go from Flash to AIR?
    plz advize'
    thanx'MD

    matthewdee wrote:
    Ok so , my fee and the Apple developers fee if the client wants to sell in App store or not, correct?
    correct.
    But NO android fee ONLY id developer wants to seek in lets say Google play correct?
    there's no android license fee needed to develop for android.  there's a fee to upload/list apps with amazon marketplace and google play.

  • Why do lists flicker and jump in iOS Music app with iTunes match?

    I recently signed up for iTunes match.  I have a large library on iTunes on my Mac and I'm using iTunes Match to sync it to my iPhone 4S running iOS 7.
    However now every list in the iOS Music app now constantly flickers and flashes.  The album artwork flashes blank for a moment and then returns.  It's as if the list is constanly updating.  This happens about every 2 seconds.
    Even worse... in playlists the entire list jiggles up and down.  Again about every 2 seconds.
    Does anyone else have the same problem?   Is there a solution?

    I don't know what the issue is, have had it since I have had match, and am thinking of ditching it because of it.  Now, after deleting and replacing a whole slew of my music with the wrong songs, have the stuff won't play or download from match, even stuff I buy in iTunes. It's ridiculous. Apple should be paying me to be losing my media by using match. It's driving me CRAZY!

  • MacPro with both Leopard and Tiger drives. Want to switch iTunes How

    I am running a MacPro with both Leopard and Tiger drives. I finally want to switch everything to Leopard and its drive. I have iTunes on the leopard drive but have never used it. How can I transfer my iTunes music, iPhone Apps etc. from the Tiger iTunes to the Leopard with the least amount of fuss?

    Hello hassiman,
    For additional information regarding moving the entire library from the 10.4 partition to the 10.5 partition, see this article:
    http://support.apple.com/kb/HT1449
    If your iTunes Library is substantial, you may want to consider backing it up to an external location as well:
    http://support.apple.com/kb/HT1751
    Hope this helps,
    Charles H.

  • HT1689 I just upgraded to iTunes 11 and now I get a "itunes cannot connect with this ........ Could not allocate a resource. Happens with both ipad and iPhone. Any thoughts on how to resolve this issue?

    I just upgraded to iTunes 11 and now I get a "itunes cannot connect with this ........ Could not allocate a resource. Happens with both ipad and iPhone. Any thoughts on how to resolve this issue?

    Same for me with Iphone 5 and IOS 7 on mac pro. Install ITunes 11.1 and after reboot nothing work. Work only with Mac Pro in safe mode.
    I have uninstalled Wi-fi-sync1.0 app from MacPro and Itunes sync well with iphone.

  • When I try to iTunes Match I get 'Please Sign In Again' error, I cannot access the songs which are visible in the iCloud in my music library on both iPad and iPhone

    when I try to iTunes Match I get 'Please Sign In Again' error, I cannot access the songs which are visible in the iCloud in my music library on both iPad and iPhone

    Did you try setting itunes to run with administrator privileges? 
    Since I changed that I no longer have this issue

  • Advice on improving graphics for app for both iPad and iPhone

    I am creating an app for both iPad and iPhone 4 and it looks terrible on the iPhone 4.
    I have created the Flash File in Flash CS5.5 IDE with Movie Size 1024 x 768 and I am using the following AIR for IOS settings:
    Rendering: CPU
    Device: iPhone and iPad
    Resolution: High
    All my graphics are vector so I assumed that it would look crisp on both devices. It is not as perfect looking on the iPad as it appears on my PC monitor but I can live with it. I can't however live with the iPhone 4 appearance.
    I am therefore seeking advice on how to improve the iPhone 4 appearance.
    As far as I am aware, there is not a way to use 2 sets of graphics, one for each device. Please correct me if this is wrong and it would offer me a solution.
    Would doing all the graphics as PNG be a solution?
    Btw I am using AIR 3.2 SDK if that has any relevance and my graphics are static.
    Thanks in advance.

    Thank you for the swift reply Colin. I do not recall setting a stage.quality setting - is the default setting low?
    I did a quick google search and see this appears to be the code I need. I assume I put this in the first frame of my Flash movie?
    stage.quality = StageQuality.MEDIUM;
    Thanks
    Paul

  • Macbook pro 15" mid 2010 i spilled water on keyboard now it wont power on if the battery is connected and the keys on keyboard doesnt work it works fine with no battery and external keyboard if i order a battery and new keyboard will every else work again

    macbook pro 15" mid 2010 i spilled water on keyboard now it wont power on if the battery is connected and the keys on keyboard doesnt work it works fine with no battery and external keyboard if i order a battery and new keyboard will every else work again lik it did before

    If you have records that show that you've taken your MacBook Pro in for a year to fix the machine, I would escalate the problem to Apple Customer Relations - unfortunately I don't have a number for Spain.
    It would only seem logical to me that if you've been trying to have the machine repaired during the time that the 'recall' was in effect that you should be eligible for a new logic board. But only customer relations will be able to make that call.
    Good luck - take the issue as high up the food chain as you can and see what happens.
    Clinton

  • Lightroom 4 crashes when trying to open the slideshow module. I spent over three hours with both Adobe and Apple tech support and we know it is a permission issue but have not been able to get it solved.  It started with the last upgrade to 10.8

    Lightroom 4 crashes when trying to open the slideshow module. I spent over three hours with both Adobe and Apple tech support and we know it is a permission issue but have not been able to get it solved.  It started with the last upgrade to 10.8

    Back up all data.
    This procedure will unlock all your user files (not system files) and reset their ownership and access-control lists to the default. If you've set special values for those attributes on any of your files, they will be reverted. In that case, either stop here, or be prepared to recreate the settings if necessary. Do so only after verifying that those settings didn't cause the problem. If none of this is meaningful to you, you don't need to worry about it.
    Step 1
    If you have more than one user account, and the one in question is not an administrator account, then temporarily promote it to administrator status in the Users & Groups preference pane. To do that, unlock the preference pane using the credentials of an administrator, check the box marked Allow user to administer this computer, then reboot. You can demote the problem account back to standard status when this step has been completed.
    Triple-click the following line to select it. Copy the selected text to the Clipboard (command-C):
    { sudo chflags -R nouchg,nouappnd ~ $TMPDIR.. ; sudo chown -Rh $UID:staff ~ $_ ; sudo chmod -R u+rwX ~ $_ ; chmod -R -N ~ $_ ; } 2> /dev/null
    Launch the Terminal application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
    Paste into the Terminal window (command-V). You'll be prompted for your login password, which won't be displayed when you type it. You may get a one-time warning not to screw up. If you don’t have a login password, you’ll need to set one before you can run the command. If you see a message that your username "is not in the sudoers file," then you're not logged in as an administrator.
    The command will take a noticeable amount of time to run. Wait for a new line ending in a dollar sign (“$”) to appear, then quit Terminal.
    Step 2 (optional)
    The first step should give you usable permissions in your home folder. This step will restore special attributes set by OS X on some user folders to protect them from unintended deletion or renaming. You can skip this step if you don't consider that protection to be necessary.
    Boot into Recovery by holding down the key combination command-R at startup. Release the keys when you see a gray screen with a spinning dial.
    When the OS X Utilities screen appears, select
    Utilities ▹ Terminal
    from the menu bar. A Terminal window will open.
    In the Terminal window, type this:
    resetpassword
    That's one word, all lower case, with no spaces. Then press return. A Reset Password window will open. You’re not  going to reset a password.
    Select your boot volume ("Macintosh HD," unless you gave it a different name) if not already selected.
    Select your username from the menu labeled Select the user account if not already selected.
    Under Reset Home Directory Permissions and ACLs, click the Reset button.
    Select
     ▹ Restart
    from the menu bar.

  • Please  i went back a refund i use my  account without a credit card  than i purchase a app with 200 dollars and it was purchased an d my account do nest have a credit card

    please  i went back a refund i use my  account without a credit card than i purchase a app with 200 dollars and it was purchased and my account does not  have a credit card  and the money was taken from the credit card

    Contact iTunes:
    Apple - Support - iTunes - Contact Us

  • I have an iPhone and iPad. I would like to get my husband an iPhone. Are we able to sync all devices and share info with both iPhones and the iPad, using a single email address?

    I have an iPhone and iPad. I would like to get my husband an iPhone. Are we able to sync all devices and share info with both iPhones and the iPad, using a single email address?

    Thanks for that. He is one of the last holdouts in IT so an email address for him would just mean I have 2 to check so that is what I am trying to avoid as we move into retirement:)

  • Sending emails with both body and attachment to multiple recipients

    I have a requirement to send email with body and attachment to multiple recipients.
    Body of the email is a standard text. It is a proxy-to-mail scenario.
    Here is what I've done: (I'm using PI 7.11)
    One mapping from Source to Target structure (format of the attachment text file)
    Second mapping from Target Structure to Mail Package format.
    In the second mapping I'm concatenating the output of first step into "Content" of the Mail Package.
    "XIPAYLOAD" is the message protocol used.
    The "Keep attachments" option in the Mail adapter allows only to send "Content" as attachment or as body of the email.
    How to send an email with both content and text?
    The other problem is even with using ASMA, I can't send email to multiple recipients. I can only do CC and TO for 1 person each - a total of 2. Although I can resolve this by creating mailing lists, it is better if this can be addressed in PI.
    Thanks for any input you can provide!
    Edited by: crazylad on Jan 18, 2012 3:39 PM

    Thank you for your response Mikael.
    For the first question, I was able to find the solution in the following blog:
    XI Mail Adapter : Dynamically building attachment and message body content using a simple UDF
    (I just needed to search with the right set of key words )
    The key is to set the "Content Encoding" as "None" in the mail adapter. If this is not done, the mail will be sent with an attachment - untitled.bin containing both the mail body and the attachment text. Also, don't forget to check the "Keep Attachments" checkbox in the mail adapter.
    Multiple recipients could be added by separating the email IDs with a Comma. I have used ASMA to set the recipients.

Maybe you are looking for

  • Get Info does not allow me to manually add album artwork

    Hello, I am trying to manually upload album artwork on iTunes with my Windows PC (Windows 8.1 64 bit).  I followed all of the steps for doing this as outlined here in the Help section.  I did a Google search, found the album artwork in JPEG format on

  • HT4972 The Wi-fi on my iPhone 4 does not connect to my home network or other networks

    The Wi-fi on my iPhone 4 does not connect to my home network or other networks that I have used in the past.  I noticed this after I updated to version 6.  I have tried to reset network settings ;turn off and on wi-fi; reset home network and it's sti

  • Can't create AMStoreConnection object

    The usual story trying to manage the AM froma client application User Authentication is okay and so is the SSOToken as I can see that the user is loged in in the active sessions tab. Once I try to create the AMStoreConnection I get the following erro

  • Adsense not showing in Mozilla Firefox

    Dear Folks, I've noticed that some pages on my website/blog do not display Google Adsense, and nothing can be seen where the ads are placed when I'm using Firefox. I have the latest version of the browser. I've tested the same webpages using Internet

  • Flash cs6 text is not showing up.

    Hello, I just opened up flash cs6 and found out that the text tool isn't working right.  It lets me select the tool and place a text box, but the text is not showing up.  It is taking up space in the text box, but I cannot see it.  The alpha is 100%