Music Choice channels not working

I seem to be having trouble tuning in to some of the music choice channels, but not all of them. I called yesterday but they didn't seem to know anything. Is anyone else having this issue? I get a message saying Free with Subscription or One Moment Please.

Good luck with that.  Maybe one of the regulars here will refresh your entitlements and solve the issue.   I've been without for over three months now, with no end in sight.

Similar Messages

  • Music choice channels ,sound cutting out

    music choice channels , all of them, the sound cuts out like a skipping record.i have had online tech service tell me to re start the cable box. 2 times in the past 2 weeks, this sometimes works.new box, new hdmi cable. same problem, this is very frustrating as we like to relax to music and not have to keep "fixing" with a re-boot.  what is the permanent fix?

    ssroadstar1 wrote:
    music choice channels , all of them, the sound cuts out like a skipping record.
    i have had online tech service tell me to re start the cable box. 2 times in the past 2 weeks, this sometimes works.
    new box, new hdmi cable. same problem, this is very frustrating as we like to relax to music and not have to keep "fixing" with a re-boot.  what is the permanent fix?
    Apologies for the issue and the experience that you described above. I have asked a colleague to review your account and reach out to you so that we can get any underlying issues identified and resolved.
    Thanks for your patience.

  • What happened to the Music Choice Channels?

    me too.  BOOO Toooo!!  And I did read the instructions at the bottom of the screen and nothing works except to turn everything off and then back on to get out of the stingray site. 

    dwinth wrote:
    zeetoe25 wrote:
    Hello,
    We awoke this morning to find out the our Music Choice Channels were replaced with Sting ray!  What's up with that?  Also, what the heck is U-verse Elite?  When I was check Sting Ray, it told me I need U-verse Elite to continue.  I hit okay and it downloaded the channels ... Is this adding cost to U-verse 300 programming?  If so, how do I change it?
    Thank to all who answer!
    Dennis
    U-verse Elite is an internet speed program which allows downloads up to 6 mbps. I am not sure what you are referring to when you are talking about downloading channels. I see Stingray right now on television. I assume you are talking about your computer or smart phone. Since I am not a techie, I will let one of the other forum members answer your question.
    As far as Stingray, itself, I am find it difficult to navigate. Music Choice was easy. With Stingray, you cannot just change channels in order to watch or listen to it. You have to hit "OK" on your remote when you get to the channel. Even then, it takes a while to actually get the channel while you wait for the circle to stop circling.
    Changing music channels is all done with the "OK", the left and right arrow buttons, and the up and down arrows. You sort of have to experiment around to get the hang of it. I still cannot figure out how to get out of Stingray other than turning off U-Verse and then turning it back on. I tried the "Back" button on the remote and the up and down channel button. Neither worked.
    It really does not matter to me at this point that Stingray is more complicated than Music Choice. I do not have U-verse for music, I have it for television and internet.
    Just press Exit to TV to exit to the 51xx channel, like it says at the bottom as I'm seeing now.  You're actually going into the Stingray app when you choose a channel. 
    You can get the app menu like the app by pressing the Back button, to choose to go to another channel.
    Really pretty simple to navigate and they put instructions at the bottom of the screen.
    Chris
    Please NO SD stretch-o-vision or 480 SD HD Channels
    Need Help? PM ATT Uverse Care (all service problems)
    ATT Customer Care(all other problems)
    Your Results May Vary, In My Humble Opinion
    I Call It Like I See It, Simply a U-verse user, nothing more

  • Left channel not working--it's a logic problem, but I can't debut it! HELP!!!

    I'm using a SB Audigy SE card on my XP machine. In the past, I've made good music files from CDs and records (remember those?), but I have not used the thing in about 18 months, and now I'm having a weird problem.
    I get output only on the LEFT channel. I'm sure it's not a problem with the input source, because I've used a cassette player and a turntable, and with both, I get output only on the left channel. This happens even when I reverse the phono cables from either device. That tells me the problem is not in the cabling leading from my device to the SB card.
    I checked the speakers using the Audigy Speaker Settings application, and it shows that both speakers are working properly: when I click on CHANNEL, I get the words "left channel" and then "right channel" successively on the proper speakers. Same when I click NOISE.
    This shows me that the problem is not on the (physical) output side: if it were, I would not get the words "left channel" on that channel, and then the words "right channel" on the right channel. As well, I can play videos (e.g. Youtube) and get sound on both channels.
    My guess is that somehow there is some setting somewhere in Audigy that is saying "process only output to the left channel." But I cannot find any setting that might be doing that.
    Anyone got any ideas???? I'm stumped.

    Originally Posted by deafguy999
    OOPS, I meant "right channel not working"! Sometimes I don't know my L from my R.
    ALSO, CDs play properly--and my speakers are connected only to the sound card.

  • Iphone 4s ios7 music player was not working, here's a bug fix.

    hi there
    i had a problem with my wifes iphone 4s, today morning while travelling to work i changed a setting on repeat option and changed it to repeat artist, it was fine until when i finish my work and on my way back i found songs are not playing anymore, lots of stop signs next to my song list, play/pause button not working, album arkwork keep moving from one to another on its own, so after i reach home i try to do some research on Apple support communities, try to soft reset my phone closing all the apps on background didnt work, also note that control centre music player was not working as well. none of the solutions worked. after trying for two hours i found out that the trouble is in repeat options , so i changed it from repeat artist to repeat off. and the music start playing as usual, but i still have those stop buttons next to the songs i tried to play earlier. At least it fixed temporarily. please also note that in the meantime i tried to sync my phone with the pc and suddenly its start syncing all the songs again assuming there were no songs on my iphone.  so guys i think soft reset might not help all the time but try to remember what settings you changed recently and change it back to the original option, not sure ,but it might help. hopin this will help some of you out there. and i already feed it back to Apple, so hopefully they will fix it soon.

    Not sure why you are having problems. I have had no problems with my 4S playing music after the update. Hopefully you will get it worked out.

  • Just installed ios 7 on my 4s, and I have two issues: 1) control centre: the music controls do not work, only the volume adjust slider works; 2) in mail, where do you find the setting to control how many messages you want your inbox to retain?

    Just installed ios 7 on my 4s, and I have two issues: 1) control centre: the music controls do not work, only the volume adjust slider works; 2) in mail, where do you find the setting to control how many messages you want your inbox to retain?

    Same problem here on my 4s: Control center music controls do not work.
    Since this thread has two issues, I'm going to start a new one with only the music control bug. Topic: iOS 7 Control Center Music Controls Not Working On iPhone 4s

  • Left rear channel not working - Xfi

    My left rear channel is not working. Its not the speakers nor the connections, its the soundcard (Xfi XM). I know this because I switched the front/rear connections to test them and the same problem?channel did not work. The problem is in both Vista and XP, so its not the software/drivers either. Any solution to this? Thanks.

    Originally Posted by deafguy999
    OOPS, I meant "right channel not working"! Sometimes I don't know my L from my R.
    ALSO, CDs play properly--and my speakers are connected only to the sound card.

  • Music/iTunes Match not working properly since update to iOS 7

    Music/iTunes Match not working properly since update to iOS 7

    Try a Restart. 
    Press and hold the Sleep/Wake button for a few seconds until the red "slide to power off" slider appears, and then slide the slider. Press and hold the Sleep/Wake button until the Apple logo appears.
     Resetting your settings
    You can also try resetting all settings. Settings>General>Reset>Reset All Settings. You will have to enter all of your device settings again.... All of the settings in the settings app will have to be re-entered. You won't lose any data, but it takes time to enter all of the settings again.
    Resetting your device
    Press and hold the Sleep/Wake button and the Home button together for at least ten seconds, until the Apple logo appears. Apple recommends this only if you are unable to restart it.
    Or if this doesn't work and nobody else on the blog doesn't have a better idea you can contact Apple. 
    Here is a link to their contacts with most of the information below. 
    http://www.apple.com/contact/

  • My music player is not working

    my music player is not working ,
    when i refresh library it won't load any music it says General error what should i do.

    @0555671213
    Welcome to the forum!
    As we don't get to see what device you have registered upon the forum, a bit more detail would help here.
    Happy to have helped forum with a Support Ratio = 42.5

  • Yahoo music search bar not working with Firefox 5

    Yahoo music search bar not working with Firefox 5.

    go to Help Menu -> select "Restart with Add-ons Disabled"
    Firefox will close then it will open up with just basic Firefox. Now do this:
    -> Update ALL your Firefox Plug-ins https://www.mozilla.com/en-US/plugincheck/
    -> go to View Menu -> Zoom -> click "Reset"
    -> go to View Menu -> Page Style -> select "Basic Page Style"
    -> go to View Menu -> Toolbars -> unselect "Yahoo! Music Search Bar"
    -> go Tools Menu -> Clear Recent History -> ''Time range to clear: '''select EVERYTHING''''' -> click Details (small arrow) button -> place Checkmarks on ALL Options -> click "Clear Now"
    -> go to Tools Menu -> Options -> General -> ''When Firefox starts : '''select "Show My Home Page"''''' -> Type the address of the website which you want to be your HomePage e.g. http:www.google.com -> click OK
    -> go to Tools Menu -> Options -> Privacy -> History section -> ''Firefox will: '''select "Use custom settings for history"''''' -> PLACE CHECKMARKS on:
    1) Remember my Browsing History
    2) Remember Download History
    3) Remember Search History
    4) Accept Cookies from sites -> select "Exceptions..." button -> Click "Remove All Sites" at the bottom of "Exception - Cookies" window
    4a) Accept Third-party Cookies -> under "Keep Until" select "They Expire"
    -> REMOVE CHECKMARK from Last Option (CLEAR HISTORY WHEN FIREFOX CLOSES)
    -> click the Favicon (small drop down menu icon) on Firefox SearchBar (its position is on the Right side of the Address Bar) -> click "Manage Search Engines" -> select "Yahoo! Music Search Bar" and other unwanted search engines and click Remove -> click OK
    -> go to Tools Menu -> Add-ons -> Extensions section -> REMOVE "Yahoo! Music Search Bar extension" (add-on) and other Unwanted/Suspicious Extensions (Add-ons) -> Restart Firefox
    You can enable your Known & Trustworthy Add-ons later. Check and tell if its working.

  • [svn] 4323: Bug: LCDS-544 - Scenario where two components have seperate channel sets with overlapping channels not working .

    Revision: 4323
    Author: [email protected]
    Date: 2008-12-15 19:23:10 -0800 (Mon, 15 Dec 2008)
    Log Message:
    Bug: LCDS-544 - Scenario where two components have seperate channel sets with overlapping channels not working.
    QA: Yes
    Doc: No
    Checkintests Pass: Yes
    Details:
    * Hunting to a new channel within a channelset never triggered a disconnect from the previous channel(s). This isn't a problem in general, but does becomes a problem when an app defines two distinct channelsets containing at least one shared channel at the head of the list. In this case, the first channelset hunts past it and connects on a later channel. But when the second channelset hunts through (triggering a connect fault when it hits that initial shared channel that can't connect), the fault is processed by the first channelset as well (incorrectly).
    Ticket Links:
    http://bugs.adobe.com/jira/browse/LCDS-544
    Modified Paths:
    flex/sdk/trunk/frameworks/projects/rpc/src/mx/messaging/ChannelSet.as

    Running the script by python2 solves it for me:
    su - mythtv -c "nice -n 19 python2 /usr/bin/tv_grab_nl_py --output ~/listings.xml"
    Best regards,
    Cedric

  • My iphone music speaker is not working what can i do?

    my iphone music speaker is not working what can i do ?

    Just to make sure, did you check the mute button on the side of the phone?
    If it is not set, can you hear music if you're using the headphones?
    If yes, listen to music using your headphones, then unplug and start the music again. If you toggle the volume up and down, can you see the volume slider moving?
    Do you get any sound, for example when your phone is ringing?

  • MOVED: MSI K8N SLi Platinum Duall Channel not work? Please help

    This topic has been moved to AMD64 nVidia Based board.
    MSI K8N SLi Platinum Duall Channel not work? Please help

    Quote from: iggsy on 29-July-05, 06:03:49
    Ok I unerstand but i have 201mhz whay 201 instend 200 ?!
    Mine does the same thing at the startup screen but not on cpuz...go figure.  Just my 2 cents.   

  • HT5858 When I swipe up from the bottom of the screen to use control center I am not able to use the music controls for music or podcasts and music controls do not work on the lock screen either is anybody else having this problem???????

    When I swipe up from the bottom of the screen to use control center I am not able to use the music controls for music or podcasts and music controls do not work on the lock screen either is anybody else having this problem???????

    Not really sur easy you would be having that problem.  Mine works.  You might try RESET DEVICE
    Hold down the Sleep/Wake button and the home button together until the apple logo appears (ignore the ON/OFF slider) then let both buttons go and wait for device to restart (no data will be lost). Then try again and see if it makes a difference

  • [svn:bz-3.x] 5036: Bug: BLZ-347 - Secure amf polling channel not working correctly on IE in BlazeDS /3.x branch.

    Revision: 5036
    Author: [email protected]
    Date: 2009-02-23 06:24:31 -0800 (Mon, 23 Feb 2009)
    Log Message:
    Bug: BLZ-347 - Secure amf polling channel not working correctly on IE in BlazeDS/3.x branch.
    QA: Yes
    Doc: No
    Checkintests: Pass
    Details: This is BlazeDS part of the fix. For MSIE over HTTPS, we need to add additional Cache-Control headers.
    Ticket Links:
    http://bugs.adobe.com/jira/browse/BLZ-347
    Modified Paths:
    blazeds/branches/3.x/modules/core/src/java/flex/messaging/endpoints/AbstractEndpoint.java

    Revision: 5036
    Author: [email protected]
    Date: 2009-02-23 06:24:31 -0800 (Mon, 23 Feb 2009)
    Log Message:
    Bug: BLZ-347 - Secure amf polling channel not working correctly on IE in BlazeDS/3.x branch.
    QA: Yes
    Doc: No
    Checkintests: Pass
    Details: This is BlazeDS part of the fix. For MSIE over HTTPS, we need to add additional Cache-Control headers.
    Ticket Links:
    http://bugs.adobe.com/jira/browse/BLZ-347
    Modified Paths:
    blazeds/branches/3.x/modules/core/src/java/flex/messaging/endpoints/AbstractEndpoint.java

Maybe you are looking for

  • Sun One application server connection problem for Oracle DB

    On our project in live environments we have six Sun One application servers that have been configured to connect to RAC Oracle database using OCI drivers. ( JDBC thick driver) Sun one application server : Version 7.0.0 Oracle Database : Version 9.2.0

  • Applet as file browser in intranet

    Hi, I am trying to create an applet as a file browser in intranet. The problem is I can not get the list of files. Is there any way to retrieve the list on particular url? Thanks. hbt

  • Safari crash after updating

    Safari won't startup anymore after software updater crashed in the middle of updating safari to 1.3.2 How can I reinstall Safari. It's not available on the original macmini startup disk neither on the Panther installation discs. Please help, before I

  • Making A Nonprofit Logo Using the Free Trial

    Hi there, I have a question about whether or not it would be legal to make and upload a nonprofit logo for a group that I am making, using the free trial of Illustrator? My group is about fan art which is uploaded from a variety of people from around

  • Duplicating a Database with RMAN

    Hi, When Duplicating the database using RMAN, does it build the auxilary database from the existing rman backups of the target database or will it build direcly from the open / mount stage of the target dabase (where there is no concept of rman backu