Music doesn't work during call

Hello all
Since I upgrade my iphne 5 to IOS 7 , Music and vedio doesn't work during call on skype
Although it was work on IOS 6.1

Hello Bader
Check out the general troubleshooting article for apps downloaded from the App Store.
iOS: Troubleshooting apps purchased from the App Store
http://support.apple.com/kb/ts1702
Regards,
-Norm G.

Similar Messages

  • Iphone 4 speaker doesn't work during call when loudspeaker is on..

    i recently found that my iphone 4  mic does work
    during call  when loudspeaker is on .If i dont  use loudspeaker .mic work fine
    is that is a hardware problem or a software issue..

    Dear Apple,
    Can you help. I can receive and make calls but i can't be heard to the caller.
    this happened after upgrading software to ios 6.
    I went to an apple customer care store but they can't help
    Can apple help in any way as my phone is a year and a half old so out of warranty.

  • IPhone 5 doesn't work during calling

    Hello
    I can't use my iPhone during calling and I don't uderstand why
    I've done every update
    Hope you can help me
    Thanks you
    Nina

    Hi Nina,
    Thanks for visiting Apple Support Communities.
    If you are having trouble with calls on your iPhone, try the troubleshooting steps in this article first:
    iPhone: Troubleshooting issues making or receiving calls
    http://support.apple.com/kb/TS3406
    Best,
    Jeremy

  • I have recently upgraded to iPhone 5 from 4, call line identity doesn't work when call other iPhones.  It works when calling any other brand of cell phone.  Network carrier assures me problem is not on there side.  Any assistance will be appreciated.

    I have recently upgraded to iPhone 5 from 4, call line identity doesn't work when call other iPhones.  It works when calling any other brand of cell phone.  Network carrier assures me problem is not on there side.  Any assistance will be appreciated.

    I have recently upgraded to iPhone 5 from 4, call line identity doesn't work when call other iPhones.  It works when calling any other brand of cell phone.  Network carrier assures me problem is not on there side.  Any assistance will be appreciated.

  • Microphone Doesn't work on Calls or Search

    The microphone on my Droid Bionic doesn't work on calls, Google search, or voice to text.  It does work when I record video and when I do a voice to text, the phone is registering that it is hearing sound (mic icon flashes) but it does not write anything down.  I've heard it's because a critical update hasn't been run, but I cannot find a way to check.

    Good point Tik on my Razr I had similar issues and I cured the issue by simply power cycling and as soon as my Razr came back on and settled I power cycled it again that what helped my little guy.. and make sure to check all your sound settings b33

  • Is there anyway I can transfer my music from my iPod touch to my iPad? My computer with my original music doesn't work anymore!

    Is there anyway I can transfer my music from my iPod touch to my iPad? My computer with my original music doesn't work anymore!

    See also Recover your iTunes library from your iPod or iOS device.
    tt2

  • I have install io6 and now Music doesn't work, sometimes it stay with a blank page with no possibility to press anithing, sometimes it crash. I have match music active with more than 15000 title. Someone could help me?

    I have install io6 and now Music doesn't work, sometimes it stay with a blank page with no possibility to press anithing, sometimes it crash. I have match music active with more than 15000 title. Someone could help me?

    What is your current Flash Player version: http://helpx.adobe.com/flash-player/kb/installation-problems-flash-player-windows.html ?
    What is your display adapter, driver version & date?  See http://forums.adobe.com/thread/945765

  • IPhone 4 Mic & Speaker not Working during Call

    Hello All,
    I have iphone 4 and it was locked on at&t and was running ios 5.0.1, now i have unlocked my iphone and now i am using ios 5.1.1. But i have a problem, when i call someone i cant hear anything "no dial tone sound and no sound during call" & speaker mode is also not working and nor the person cant hear my voice. I also tested on my another phone but same problem.....
    So can you tell me is this a hardware problem or software problem ?? and yeah i can record voice memos and i can listen my memos with speaker on and off
    Waiting for reply....

    Do the basic troubleshooting steps described in the User Guide:
    1.  Reset iPhone (no data loss): Press both home and power buttons for at least 10 seconds, releasing when the Apple logo appears.
    2.  Restore in iTunes using a backup
    3.  Restore in iTunes as new, without using a backup.
    If restoring as new doesn't help, there is a hardware failure.

  • Video doesn't work when calling from Jabber to DX650

    Hi,
    I just added a DX650 to our CUCM 9.1.2. When I call from either Jabber to the DX650 or Lync to DX650, the video doesn't work and the call is audio only. The message i'm seeing on Jabber is something like "the other endpoint is not accepting video." Sorry i don't remember the exact message. Has anyone seen this issue before? Thanks!

    Lync is not standards based and has proprietary codecs for video. You will need a Expressway with the MS Interop key to get video both ways.
    https://www.cisco.com/c/dam/en/us/td/docs/telepresence/infrastructure/vcs/config_guide/X8-2/Cisco-VCS-Microsoft-Lync-Deployment-Guide-X8-2.pdf 

  • Wireless Music doesn't work with new software

    Hello-
    I can't get my wireless music to work after I update the software to the latest version. The only one that will work is when I install it from the CD. But, I would like to use the most recent version of the software. As soon as I update, the Media Server won't launch on my computer. I am using a linksys WRT54G wireless router. If I check DHCP clients, the wireless music receiver is successfully getting an IP address. I have tried all of the things that linksys suggested (disable WEP, firewall, broadcast SSID, etc...) to no avail. Has anyone gotten the latest media server software to work with WRT54G? I have tried it on both my XP and W2K machine, with the same results (doesn't work).
    Thanks,
    Rich

    <SPAN>Hi Jeremy
    <SPAN>I have the similar problem, I've installed the software on my desktop, no error messages (apart from the certificate) and everything seems to be fine. After about 2 minutes the message appears that the network is not ready and consequently the media server is not running.
    <SPAN>Without the server running I can't setup the Network and the entire system is not working. I could ping it but that was about it.
    <SPAN>I've reset my router, renamed the SSID, tried with and without WEP, MAC, without firewall, opened a new account on my desktop with admin rights installed the software again into a new folder - result still not working, same error message.
    <SPAN>To make really bad, I installed it on my laptop, same procedure and it works fine! So it seem that it has nothing to do with my wireless devices or configurations, there must be a problem while setting up the software on my desktop.
    <SPAN>I really would appreciate your help a lot!
    <SPAN>
    <SPAN>Cheers
    <SPAN>
    <SPAN>Balz

  • Jabber Reads Internal Microphone but doesn't work in calls

    Jabber is reading the Internal Microphone from the laptop with moving bars and everything showing that the is sound coming through.
    However when the user makes a call to anyone she can hear them fine but they cant hear her speaking through the laptop internal mic.
    If she uses an external mic though it works totally fine and her voice goes through in calls it just doesn't work with the internal mic even though Jabber is picking it up.

    hi rarredondo1,
    This can happen if another program is using the MIC at the same time.  I would make sure all programs are closed out when using the CJV software.
    Not sure if this is on a MAC, but I would also make sure the settings are using the internal MIC when in a call.  
    If this is on a Windows Computer, make sure the MIC is set to internal computer MIC instead of some other setting.  Conflicting settings could create this issue. 
    Regards,
    Jason

  • Manually managing my music doesn't work

    since i installed the last version of itunes, if i set it to manually manage my music, it doesn't work. i try dragging the files over to the ipod, and itunes says it's updating the ipod. the progress bar goes to the end, but the files never get copied. if i disable it, then files in the library copy over fine.
    what gives?
      Windows XP Pro  

    Hello, stashmore94. 
    Thank you for visiting Apple Support Communities.
    Usually the reason for interrupted, stalled or canceled syncing alerts is a result of either security software interference or TCP/IP modifications.  Also, non Apple cables and low powered USB hubs can cause this issue.  Here are a couple resources that I would recommend going through as they may help resolve the issue.
    iTunes: Troubleshooting security software issues
    http://support.apple.com/kb/ts3125
    Apple software on Windows: May see performance issues and blank iTunes Store
    http://support.apple.com/kb/ts4123
    Cheers,
    Jason H.

  • Copy Paste doesn't work during and after a remote login session

    Hi 
    I am using a Windows 7 Home Premium Service Pack 1 laptop to login into Linux. I am using Putty and Xming to SSH and view the desktop. Whenever I start a session the copy paste functionality gets disabled in my laptop,i.e., I cannot copy text from one text
    file to another or within the same text file. The copy paste doesn't work even upon closing the connection. 
    From what I have gathered it is not possible to copy from one computer(host) to another(guest) during a remote login session but I am not able to copy within my windows laptop. 
    Is there some setting that I need to change to prevent it from happening? What are the possible solutions?
    Thank You
    Rishabh

    Hi,
    Are you able to copy and paste in the putty session, with mouse or keyboard?
    Using PuTTY
    http://the.earth.li/~sgtatham/putty/0.52/htmldoc/Chapter3.html
    Please restart your PC to check whether you can get back the copy and paste function. It can be caused by some compatibility issue.
    Please also run "sfc /scannow", check if it find and fix any errors.
    NOTE
    This
    response contains a reference to a third party World Wide Web site. Microsoft is providing this information as a convenience to you.
    Microsoft
    does not control these sites and has not tested any software or information found on these sites.
    Regards
    Yolanda
    TechNet Community Support

  • My proximity sensor doesn't work after call waiting

    My proximity sensor works fine during calls. Until someone calls in while I'm on the call. Whether I answer or not, when I pull it away from my face it activates the screen as it should, but it never turns it back off when I continue the conversation. This ONLY happens with call waiting. once i press on the home button and unlock the phone it works fine, knowing that i had a replacement for the phone for the same fault and now and i don't know what to do as my brother's phone is exactly the same however it works fine.
    I have an iPhone 6 running 8.2

    Try removing your case.  If still an issue, take it in to Apple.  You have a 1 year warranty.

  • Microphone not working during call

    microphone not working during phone call.  both microphone and headphone mic not working during normal phone call.  microphone works during facetime call.  any suggestions?

    Hi there naxster,
    You may find the troubleshooting steps in the article below helpful.
    iPhone: Microphone issues
    http://support.apple.com/kb/ts5183
    -Griff W.

Maybe you are looking for

  • Sound Clip Format

    what are the format for sound clip to be inserted to a video?

  • ECC 6.0 and Netweaver 7.3 BI across different OS

    Hello all, We are currently upgrading to ECC 6.0 EHP 5 on AIX/Oracle 11g. Our Business Intelligence team would like to run Netweaver 7.3 BI along with BOBJ 4.0 and Data Services 4.0 on Windows Server 2008. I was just wondering whether this was possib

  • IP Packager not updating revision on changes?

    Greetings, I've been using Vivado 14.3 for a few weeks now, under Ubuntu 14.04.  It's been working pretty well.  Starting today there has been a change in the design flow, I don't know why it's changed but it's got me stalled at the moment.   I am cr

  • How to redirect the tomcat to my project folder!

    instead of putting all the files inside of the <tomcat>/webapps/<myfolder> I try to move the <myfolder> to another directory. say, /home/<myname>/<myfolder> so that, i can work in my home directory by /<hostname>:<port>/<myfolder> what procedures i s

  • Mx 410 prints one page {as wanted} then spits out 7 blank pages Why ??

    This happens when i use page setup in print preview to resize the image. Print dialog box indicates  all pages as selected Not able to make any other selection.  Display of print que shows 8 pages to print.  One page of image is printed, (as wanted}