Music dropping in burned DVD

I hope someone can help. I tried just about everything that everyone has suggested so my DVD will burn properly, but my music keep dropping at the same point in every DVD that I've burned.
This is what I've done so far:
Made slideshow in iPhoto - played beautifully for a Relay For Life event. People want copies.
Shared to iDVD from iPhoto Slideshow. iDVD kept crashing at startup.
Went to Apple Discussions and took someone's advice to reinstall iDVD, in the meantime,
Sent to Quicktime Player (played beautifully). However, can't burn from QTP
Saved as .mov file, but iMovie doesn't import it as video
Reinstalled iDVD
Made DVD from iPhoto album (not slideshow) and iTunes Playlist (previewed and it played beautifully again).
Burned DVD, played it - audio dropped for 2-6 seconds in two of the songs
Went back onto Apple Discussions
Figured out that I should re-format my music to AIFF files which I did.
Edited project with new music
Burned another DVD (Maxell DVD-R)
Again audio dropped at same spot again
Went back onto Apple Dicussions
Took suggestion to saved as image file.
Burned to DVD at 2.4x (my lowest setting) for 5th time and music still drops at the exact spot on each copy I burn.
Right now I have the same project in .dvdproj, .mov and .img
I made a DVD about 18 months ago, when I was new to Mac and it was the easiest thing ever. I never had anything close to this happening, or I would never have attempted it again.
I'm out of ideas - can anyone give me other suggestions.
Thanks!!!

Can you confirm you are using iDVD 7 from iLife 8?
This will not run on Tiger, it requires Leopard.
If you are running iDVD 6 you are in the wrong forum, but we will carry on here!
Previewing in iDVD is not the same as previewing the final version prior to burning.
To preview the final version, without wasting another DVD blank, go to File menu and click on Save as Disk Image.
This creates the final version and does all the rendering etc short of the actual burn.
If you open DVD Player you can play that Disk Image as though it was a DVD.
If everything works, only then burn to a DVD. In this case use Disk Utility to burn the DVD - or better still, invest in Toast.
As for the audio drop-outs, are you sure you are using AIFF files that are not DRM copy protected?

Similar Messages

Music drops out on DVD

I am using iDVD 3 and when burning the audio drops out of the imported tracks. Only the audio on the original footage remains. This happens consistently - what can i do?

If you're using music purchased from the iTunes music store, it will play fine in iMovie, but Apple's copy protection process prevents it from being burned to DVD using iDVD. There is a workaround (burn a playlist to CD and re-import) if this is your problem.

Why cant I burn my purchased music onto a new dvd?

Hi,
I wanted to make a backup of the music I have purchased from the Music store. I have not burnt any backup CD’s or DVDs at all yet.
There are 134 songs with 697.3MB. (This doesnt mean much to me to be honest!) As this is too much for a CD I thought I would burn a DVD.
As per the ITs “help” instructions “to create a data CD or Burn DVD” I went into Itunes preferences and selected the advanced botton, then “Burning” header, then Disc Format and selected DVD and Preferred speed tab to 2x. I have also tried maximum speed.
The brand new DVD is a Panasonic DVD Ram 3X speed 4.7GB 120 mins rewritable.
All songs were checked and were in the “Purchased folder” I selected ‘burn disc’ from Itunes window and put the blank DVD in as requested...’checking media’ appears in the iTunes window.......
the DVD is continually ejected with no explanation as to why!
I have also “highlighted’ all of the songs and completed the same procedure as above with the same result.
I tried moving the selected playlist to a new folder with no joy again.
What am I doing wrong?
Thx George UK

Well now I know!!
fromt the apples site!
SuperDrive: Ejects DVD-RAM Discs
The SuperDrive, included with some Power Mac G4 and iMac (Flat Panel) computers, does not read DVD-RAM discs.
Symptom
The DVD drive ejects every DVD-RAM disc, but accepts DVD-ROM and DVD-R discs, which appear on the desktop without any issues.
Products affected
Power Mac G4 (Digital Audio) with SuperDrive
Power Mac G4 (QuickSilver) with SuperDrive
Power Mac G4 (QuickSilver 2002) with SuperDrive
iMac (Flat Panel) with SuperDrive
Solution
The SuperDrive does not read DVD-RAM discs and will eject them. They will not appear on the desktop, nor will the Finder display an alert box or error message. For more information about the discs that are compatible with the SuperDrive, see article 58770 "CD-RW and SuperDrive: Specifications and Usage Information."

In preview all is good...burning dvd the music cuts out 2 times in 4 songs...i have turned off all other programs, sleep and energy mode for battery...multiple tries... same result ...help

IDVD - in preview all is good...burning dvd the music cuts out 2 times in 4 songs...i have turned off all other programs, sleep and energy mode for battery...multiple tries... same result ...help

Hi
No audio on DVD disc.
Most common origin.
1. Imported audio from iTunes.
• In iTunes copy out as an audio-CD .aiff
• Use this in Your movie project
2. Low - Free Space on Start-up/Boot/Internal/Mac OS Hard disk makes it hard for iMovie to work as intended.
Down to 1.3 GB and it doesn’t work - especially audio don’t migrate over to Media Browser
(iM’08 & 09)
3. Material in iMovie’08 & 09 - Shared to Media Browser and here selected as Large
large.m4v. It silenced out this project in iDVD. By making a slight alteration - provocing it to ask for a new Share/Publish to Media Browser and here selecting 640x480 - and audio was back when a new iDVD project was created including this movie.
176x144
480x360
640x480
720x540 960x540
4. Strange audio formats like .mp3, .avi etc.
• Change them to .aiff. Use an audio editor like Audacity (free)
5. Main audio is set to off in System Preferences - Does this by it self - Don’t know why
Cheque Audio-Out resp. Audio-In
6. Ed Hanna
Had the same problem; some Googling around gave me a kludgy, but effective fix
Downgrade Perian from recent versions back to version 1.0.
That worked for me, and so far I haven't encountered any deficiencies—except it takes more advanced versions of Perian to enable QuickTime to handle subtitles in .srt format—that I have noticed.
7. GarageBand fix.
In this set audio to 44.1 kHz (Klaus1 suggestion)
(if this don’t work try 48 kHz - me guessing)
Before burning the DVD.
• Do a DiskImage (File menu and down)
• Double click on the .img file
• Test it with Apple DVD-player
If it’s OK then make Your DVD.
Burn at x1 speed.... (or x4)
• In iDVD 08 - or - 09
• Burn from DiskImage with Apple’s Disk Utilities application
• OR burn with Roxio Toast™ if You got it
Yours Bengt W

Low quality of burned DVD even if I drag&drop iMovie project into iDVD

Hi all,
I've a iMovie HD project that I want to burn via iDVD (7.0.4).
If I click "Share with iDVD" the quality of the resultung video (which is burned to DVD) is rather poor. As I've read within this discussions, the preferred way is to close iMovie and "drag and drop" the iMovie project into iDVD.
With this way, iDVD (instead of iMovie) will render the movie, which should give a video with far more quality.
Unfortunately, the burned DVD with the "drag and drop" method has the same low quality as the video with "Share with iDVD".
I've done a little research and noticed that the "shared movie" for iDVD (iMovie project->Show package Contents->Shared Movies->iDVD) for a 1:10 video has a filesize of only 32kb!
Is there any way to set the "export" parameters for this "shared movie" (it is a quicktime file)?
The quality of the completed DVD is acceptable if I export the iMovie project to "DV stream" an import this stream into iDVD. But in this case I lose all my chapter markers of the movie ..
Is there any way to export the movie from iMovie HD and keep all the chapter markers for iDVD?
Importing the iMovie HD project into iMovie 08/09 is not an option, as I lose the chapter markers also ..
Thanks in advice,
Kind regards.

Hi,
the iMovie project was created as "DV" project and I imported DV PAL clips. The iDVD preferences are also PAL (25fps) and the quality setting is "professional quality".
I've also tried the setting "best performance" within iDVD (as suggested within this forum), but with the same poor result.
I can see within the iDVD "project info" that iDVD will use "mymovie.mov" within the "Shared Movies->iDVD" of the iMovie project (Show package contents).
As this converted movie is of low quality, I think this is the root of evil.
If I export the movie from iMovie with "Export as DV stream" and import this converted movie into iDVD the quality is ok - but I lose the chapter markers ..
Is there any way to keep the chapter markers?
Kind regards.

Burned DVD stops or music skips at 100th chapter

I am creating a slideshow with music in iDVD. When playing the burned dvd the music skips or the dvd stops at the 100th picture. Any fix for the problem? I noticed that iDVD automatically assigns each picture its own chapter so it could be the 100th chapter that causes the problem. If so, is there any way to have more than 1 picture per chapter?
Thanks for your help!

The 99 photos was because, as the original poster indicates, each photo is a chapter and the Video DVD standard (nothing to do with Apple, but the industry standard) is 99 chapters max. These days many players will play past 99 chapters, but many others, especially older ones, the strictly conform to the DVD standard balk when there are more than 99 chapters.
So while iDVD will now allow slide shows past 99 photos, if you want your DVD to be compatible with the most set top players, you are better off limiting your slideshow to no more than 99 photos. If you want more, then you want to create your slideshow manually in iPhoto or iMovie and place your own chapter markers keeping the number of chapters under 100.
Patrick

My iPhoto "share" drop down menu no longer has the burn dvd option. What do I do?

My iPhoto "share" drop down menu no longer has the burn dvd option. What do I do?

That feature was dropped with iPhoto 9. Select the photos you want to burn to disk, export to a folder on the Desktop via the File ➙ Export ➙ File Export menu, insert a blank disk in the optical dirive, drag the folder onto the disk icon and drag it to the Trash bin to burm.
OT

Missing some sound in burned DVD

When I play my burned DVD the music sound track is there but when the music is ducked for the vocals, the vocals are not there.

I have been trying to make a dvd with a sound track. I checked the sound and saved as mp3 format placed sound in sound box, tested it with slide sow. All is well, then I burn it, and when I play the burned disk I find there is audio drop out each time i remaster it. Is the conversion from mp3 to mp4 during the burning process failing causing the drop out?

Is there any hope of using iDVD 7 to burn DVDs (Leopard 10.6.6, Mac Mini)?

I've tried many of the suggestions in these discussions, short of reinstalling iDVD or wiping the hard drive and reinstalling OSX 10.6.6, and doing that seems excessive simply to use included Apple software. I have more than 260GB available on my hard drive, no external drives open (there are some connected both by FW and USB, but they are not even turned on, just connected to ports).
iDVD 7.1.1 won't even get past the menu before it fails and gives an error that the 'burn cannot be completed'. There are no 'extras' in the menu, simply ONE QT/iMovie/iDVD compliant 15-second video; no drop zones, no fancy anything, default text for the video 'button', no hyphens or special characters, simply one video from my camera and the application can't get past the menu.
Should I just go back to burning dvds from my powerbook G4 (tibook) through s-video to a dvd/vhs recorder?

Hi, and thanks for the quick response. Yes, I have deleted the iDVD preferences about a dozen times. I started out my first project with a positive attitude and set up to burn 4 videos (all non-copyrighted, from my own cameras and library), and decided to fill in some time with slide shows from pictures on the hard drive (not in iPhoto, but they showed up in the iDVD media area and tested fine following the iDVD 'how to' pdf.)
I had added audio (to the slides), but it was from an external 40-gb firewire drive, and one of the slide shows was from pics stored there.
I removed those externally-hosted files first, after trying several times to delete the plist file with no better results. Then I removed that hard drive from the picture and turned it off, so no external source files are in play.
I removed slide shows entirely from the media list after just removing them from the project and menu seemed to have no affect, partly since the error message mentions the 'menu/slideshows' in it's (boilerplate?) dialog box.
Tried 'burning a disc image' after each modification (reduction of number and length of files) to the project, based on recommendations here.
With each successive error (none of which got past the menu building phase) I removed another video file; deleted the menus entirely and tried 'new' menus, until I decided to remove all videos from the project and try just that one short 15-second video shot last week for posting on a web forum (it was not one of the original videos I hoped to use).
I shut off all 'drop zones' from the menus. I used the default fonts and text buttons that appear when you drag a file from the media list into the menu window.
I even tried rebooting the computer to clear any latent memory that might be causing a problem (as a 'shot in the dark'). After every change, I quit the project and iDVD and deleted the plist, then restarted iDVD and tried again. All to no avail.
I'm on a budget, that's why I downgraded from my old iMac G5 when it died and switched to the Mac Mini aluminum 4,1, and I'm not looking to upgrade my now useless Toast 5xx to a compatible Toast 10 (even if that might work).
To recap:
I started out full-bore with video and photos and music (latter two for slide shows);
After confirming everything worked together and there were no errors showing in the map view, and running through the slides and video files several times to make sure they 'worked', I tried to burn the disc (no disc image at this point, just a confident full-blown burn). Got the error in the menu phase.
Started reading the discussions forum (this place) for a couple hours looking at what problems others were having, and trying the suggestions posed therein. No luck.
Then decided to try deleting preference plist and creating a 'disc image' on the desktop of the entire original project. No luck.
Then multiple incremental changes to the original project until I was left with the single movie file to see if any of my original media files might be the problem. (I even made sure there were no special characters in the titles, menu buttons, etc of any of those files, as someone mentioned the menus don't like any 'special characters'.)
So, here we are. I am wondering if maybe the Mini is just not powerful enough to handle burning dvds? (It seems like it isn't platform based, since iDVD doesn't even get through the menu phase). This Mac Mini is about 1 month old.

Idvd won't burn DVD of iphoto slideshow

Using iphoto 5.0.4 I've created a slide show, added music etc. It all works wonderfully in iphoto until I try to "send to idvd". (idvd 5.0.1) The idvd dialogue box indicates that it is exporting and everything seems in order until I plink the "burn" button in the box that appears when export has completed. Things whir for a while then I get an error message about burn failed. The rest of the error message varies from time to time but is usually something about menu. It sometimes ejects the partially burned disk, othertimes I have to shutdown and/or restart to get the disc to eject. I did get one satisfactory burn out of 11 attempts (I'm persistent). I'm using TDK DVD+R 1-16x disks.
Just putting the jpeg photos onto a disc works fine but its snafu time trying to burn a slideshow
This is what System Profiler says about my DVD drive:
MATSHITA DVD-R UJ-846:
Firmware Revision: FA0G
Interconnect: ATAPI
Burn Support: Yes (Apple Shipped/Supported)
Cache: 2048 KB
Reads DVD: Yes
CD-Write: -R, -RW
DVD-Write: -R, -RW, +R, +RW, +R DL
Burn Underrun Protection CD: Yes
Burn Underrun Protection DVD: Yes
Write Strategies: CD-TAO, CD-SAO, DVD-DAO
Media: No
Do I have a software or hardware problem? Is there a good way to reliably burn DVD's of slideshows.
On the one burn that worked, when played back, the pictures are not at all sharp or clear yet the original photos in iphoto and iphoto's slideshow are quite crisp. Is this just what I can expect from a burned DVD or are the burned slideshow photos supposed to be crisp?

Welcome to the forums.
You'll see various posts about image quality; one improvement results from resizing your photos -- see this and other suggestions at:
http://discussions.apple.com/message.jspa?messageID=4399400#4399400
In terms of workflow, I prefer to Share/Export my slideshows from iPhoto to full-quality Quicktime movies. You can double-check the resulting movie before dragging it onto the iDVD menu area (not into a drop zone).
For burning, you'll reduce errors by using slow burn speeds and high quality discs. Verbatim is often recommended around here; I also like Sony. DVD-R are the most compatible with players, but perhaps this isn't a dramatic difference compared to DVD+R. To better control burn speeds, first create a disc image (Save as Disc Image) and then copy the disc image to your DVD (use Roxio Toast or Apple's Disk Utility).
There are a variety of other tips to improve the consistency of burns, so write back if you still have troubles.
John

Burn DVD from iPhoto

Using iDVD 7.0.4 & iPhoto 8.1.1.
Music :If I burn a DVD from an iPhoto Slideshow, will the music in the slideshow be on the DVD ?
Text Slide :I want to add one or two slides which just have some text on - probably - a black background, how can I do this ?

I like iPhoto for slideshows, and what I do is Share/Export the slideshow to full-quality, large Quicktime video, including the selected audio. This video file can be dropped into or imported into iDVD.
You can create a graphics file in Photoshop or other software and save it as a jpeg or similar format. This can be imported into iPhoto without any difficulty.
John

I repeatedly get "error during rendering/encoding of menus/slideshow" message. This process is the same on my iMac, MacBook and another iMac. I have been burning dvd's int he same way for the past 12 months using the exact same steps successfully.

I keep getting "error during rendering/encoding of menus/slideshows" message. I have been burning DVD's in exactly the same way for the past 12 months and mostly on my MacBook which is 3 years old. Obviously I'm using iDVD. I purchased an iMac about a year ago and moved to use this for dvd burning without problem. A few months ago (approximately) I started to experience problems with burning with the error message above. I tried everything including starting the whole process from scratch right down to capturing the movie clips from my video recorder into iMovie, then using them in iDVD. Still the same message came up. I lost count of how many times I repeated the process with different clips and variations and the same thing happened. This was also the case with my MacBook and my husband's iMac.
After taking both of mymac's tothe service centre, having new optical thingys put it and even a new hard drive on my iMac along with a new DVD burner the same thing happened. They told me it must be the process that I am using that is incorrect!
I took my 27" iMac to an apple shop and asked them to assist me while I use the same technique as I always had. The same message came up so they tried using my clips in one of their mac's. The same message. They tried it with different clips and the same message. The only way we could get theirs to work was with a magic DVD which did not produce what I needed and was limited with only one page.
I now cannot use any of my Mac's for the intended purpose that I bought them for - to produce good media for my work! It was suggested that I purchase some non Mac software to burn DVDs which defeats the object of having a mac with iDVD in my opinion. I have a book on iDVD which is very informative and have followed the process to the letter and checked all the trouble shooting and still no remedy. It was mentioned that an up-date may have caused the problem on all my macs.
I feel that this issue should be addressed by Apple as a matter of correctness.
I now find that on the net there are many posts in forums and such like with exactly the same (almost word for word) problems. Please Apple, keep/regain your good name and sort this out.
Jayne Connelly

Thanks Bengt W for your attention to this matter. So much appreciated. And thanks for putting me right on the aim of forums (new to this). Although, you may regret asking for more information. I've added everything I can below.
The process I used is as follows:
Import recorded clips of between 5 and 15minutes each from my video recorder into i
Edit the clips (remove unwanted start and endng)
Add title to front of clips
‘Share’ them to ‘movie’ (export using QuickTime)folder in .mov format individually
Open iDVD and ‘create new project’
Select ‘favourite’ theme that I have set up forall my work dvd’s (this has been used successfully many times and I’ve triedwithout using the favourite them).
Add 2 submenus for each group of clips
Select submenu - drag and drop between 3 – 6 clips in each of the twosubmenus
Change title colours on clips
Dragand drop image into drop zones where required
In‘map’ view I check for any yellow warnings before burning to disc
In an attempt to remedy the problems I’ve tried the following:
Try new DVD discs
Try different themes (favourites and standardones)
Change images in drop zones
Start whole process again even from importingfrom camera again
Two other completely different computers (iMacand MacBook) with iDVD
Go to apple shop and use their computers to doin iDVD
Try with one clip and no menu pages added
Use a clip that I already have that did notoriginate from my camera
Turn computer off and restart
New hard drive
New optical lense (thing)
New DVD burner
Saving to disc image rather than dvd disc
Other points:
I also have a ‘flip’ and ‘iPhone’ whereI’ve imported footage camera which, although limited, records and makes videoclips and burns them to DVD through iDVD without problem.
For example, I have just gone through steps 5 - 11 using some clips that were already imported from my iphone to iPhoto and dragged across. I used a theme that I've used before which has failed and added one sub menu page where the clip went. It burned to disc image successfully.
The startup disc, I believe will have no space issues asit’s a new hard drive with no use apart from this. That could have been an issue before (I didn’t check it) butnot now.
Other technical stuff that I don't understand but you may:
I have…… Mac OS X Version 10.6.7 with all updates onit. Processor 2.8 GHz Intel Corei7. Memory 4GB 1067 MHz DDR3.
iDVD version 7.1.1
HardwareOverview:
Model Name: iMac
Model Identifier: iMac11,1
Processor Name: Intel Core i7
Processor Speed: 2.8 GHz
Number Of Processors: 1
Total Number Of Cores: 4
L2 Cache (per core): 256 KB
L3 Cache: 8 MB
Memory: 4GB
Processor Interconnect Speed: 4.8 GT/s
Boot ROM Version: IM111.0034.B02
SMC Version (system):            1.54f36
OPTIARCDVD RW AD-5680H:
Firmware Revision:     3AHB
Interconnect:    ATAPI
Burn Support:   Yes (AppleShipping Drive)
Cache:    2048KB
Reads DVD:    Yes
CD-Write: -R, -RW
DVD-Write:   -R, -R DL,-RW, +R, +R DL, +RW
Write Strategies: CD-TAO,CD-SAO, CD-Raw, DVD-DAO
Media: Toshow the available burn speeds, insert a disc and choose View > Refresh
If you can solve this you are better than the 'apple geeks' in the shop and the service technicians in the service centre (and of course me but that's no achievement).
Eagerly awaiting your reply.
Jayne

How can I convert my imovie from ipad to burn dvd on PC

I have produced a 30 minute video for my son's football team using Imovie on my ipad. I do not have an apple computer and need to convert the imovie to my PC in order to burn DVD's. This process seems impossible. I have read many forums and am trying to export the project to my camera roll, however the process never completes itself. It will export for literally hours without completing the process. This project have taken me weeks to complete, mainly because the process is very slow with imovie and extremely frustating. Now, I'm ready to finish up and am so worried I will never get it off my ipad. What do I do??

NO files larger that 500mb (which is **** near any video) will not transfer!
At: http://support.apple.com/kb/HT4083
It incorrectly state this:
"Windows XP cannot import video files larger than 500 MB using Camera and Scanner Wizard. You can transfer these files directly from your device by selecting them in My Computer and dragging or copying the movie files to your computer's hard drive."
Problem is that NO videos are shown as I open my ipad up in "My Computer", only photographs I have taken
THIS INSANE. You put Hign Def Video camera on the IPAD and NO simple way to get the you home made videos of it? Search this topic "transfer video from ipad to computer" you get NO help. the only responses are from people hocking there "computer programs that will do it" or "apps" that transfer files.
Apple here is the reality. At this point, regarding computers, PC is King...get it? We do not all have apple computers to go along with our ipads. ... So incase i need to break it down for you....YOU NEED TO HAVE A EASY WAY TO REMOVE VIDEOS FROM AN IPAD TO A FREAKIN PC...
I am not sure what is most amazing:
-ipad designers not seeing this as a problem
-the lies at http://support.apple.com/kb/HT4083 that discuss easy it is to simply open up "my computer" and drag an drop
-ignorant people responding to several other people with my same simple problem with stupid response like "so you want to put a video on your ipad, you do that thru itunes" or "gosh it's been a while since i did this but its real easy, i think..."
There are not even any you tube videos on the subject... Am I in Bizzaro World here????

Error when burning dvd's

I have a satellite a305 with vista. I had been downloading torrents awhile back and got a nasty something because my computer went crazy. I managed to "fix" it except that the keyboard and mouse were nonresponsive. A usb mouse worked but no usb keyboard would install. Despite this, I was still able to burn dvd's.
Now, since it is unacceptable to NOT have a properly working keyboard I had to factory reset the computer. Now it all works great.
EXCEPT when I burn a dvd (dropping files to it....I haven't downloaded any 3rd party software) it starts to encode...gets to about 3.5% and then encodes super fast (usually burning a dvd takes 1 1/2 to 2 hours) and eject the disc after 30 seconds. A window pops up saying an error ocurred while burning the dvd. I am using memorex dvd-r discs. It did the same thing when I used my old disks (Sony dvd-r) but I assumed that since they were scratched a bit that must be causing an error.
I just want to make my DVD's. So frustrated!! I tried checking to see if Toshiba had a driver update I was missing since I did an out of the box reset, but they're screen to choose my laptop doesn't have my model available.
Any ideas for me?

Since Toast is not an Apple product, you should probably post your question on Roxio's discussion boards:
http://forums.support.roxio.com/

Error when burning DVD RW (Error Code 0x8002006E)

Works with DVD +R, -R, CDR... but it wont burn DVD+RW for some reason
I had this problem 3 years ago when it refused to burn CDs, and I had my ODD replaced with one of these
MATSHITA DVD-R   UJ-857E:
Firmware Revision:          ZF1E
Interconnect:          ATAPI
Burn Support:          Yes (Apple Shipping Drive)
Cache:          2048 KB
Reads DVD:          Yes
CD-Write:          -R, -RW
DVD-Write:          -R, -R DL, -RW, +R, +R DL, +RW
Write Strategies:          CD-TAO, CD-SAO, DVD-DAO
Media:          Insert media and refresh to show available burn speeds
So here I am again having the same problem - 'burning the disk failed because an unexpected error occured (Error Code 0x8002006E)
I tried both burning from Finder and disk utiilty. I tried quickly erasing the data on it, which was nothingnd when I tried to burn something it threw up this error - 'The disk can't be burned, because the devide failed to calibrate the laser power level for this media' (their bad grammer not mine)
So what is this a software problem or another faulty ODD?
I ran a hardware test recently and no problems were identified.

I just tried it again using a different account, same problem. I was burning DVD+Rs already today, then I went out and bought a packet of discs from tesco DVD+RW and they wont burn no matter which way I try it. I remember having this problem with Tesco CDRs 3 years ago when I sent my macbook in for repair, but I think I have used tesco discs since thren without problems. I've had trouble on two occasions reading music CDs as well + the drive is sluggish and noisy when inserting/ejecting discs.
Finding a lot of threads on this and not really much in the way of solutions. At best I've been able to ascertain that the problem is probably software related owing to the error code.
I don't know what else to try. I hope tesco take back this stack of discs that's probably got nothing wrong with them, I doubt Apple will refund me.
This computer has just turned out to be an endless source of problems and headaches.

Music dropping in burned DVD

Similar Messages

Maybe you are looking for