Music found, but not being read

So i was on a plane when my ipod started acting up just skipping songs. So I reset it. Though when I did that it showed all my songs were gone. Though the space for the songs is still there. i then found the files looking on my computer. how can I get the files back showing up on my ipod?

I now see that all the files on my ipod are being shown as other and not music. How do I get them back to music

Similar Messages

IPOD SHUFFLE PLUGGED INTO USB HUB BUT NOT BEING READ

I recently got a 4 port USB hub because I needed extra usb ports. I mainly use the hub to connect my flash drive, external hard drive and my IPOD shuffle, but the only thing that isn't getting read by the computer is the shuffle. Everything else that is conncected to the hub is being read by windows. The shuffle just sits there, when plugged into the hub, blinking a green light (which doesn't look normal). The hub itself is a 2.0 hub. HELP!

I had the same problem. FIRST, I had to remove the software that came with the original ipod shuffle. 2005/06/26, and replace it with the older version 2005/01/11 that I found on this site: http://www.opendrivers.com/driver/220012/apple-ipod-ipod-mini-ipod-photo-ipod-sh uffle-software-updater-2005-01-11-windows-2000-xp-free-download.html
Once in a while it still doesn't recognize the ipod, but I think that's a usb port problem. Unplug it and plug it in again and it should be fine. Just make sure you remove the original software first in the add/remove programs section!
Also, if Mac is so good (according to some people on this site), why did Mac start using the Windows XP software and not vice-versa!!! haha
Good Luck!!!
pentium IV 2.3 Windows XP

Users found, but not displayed in console with WL8.1 SP5 and iPlanet LDAP

Hi all,
I've just installed WL8.1 SP5 and have recreated my domain configuration, as happily used by SP4.
All seems well until I add an iPlanetAuthenticator via the console. The console reports that it has been created successfully, but when I browse users, I am told that the console is displaying the first 51 of the 413 users found, but only six are displayed, those six being in the internal LDAP.
If I re-order the configured authentication providers and put my iPlanet Authenticator first, entries from iPlanet are displayed, but a search to find users in the internal LDAP return nothing.
When I say return nothing, it does not fail! No error is returned and on looking at the HTML I find that blank table row(s) are placed in the results page, their number corresponding to the number of users found in the 'invisible' LDAP directory.
My application works - meaning that users are being found, but not being able to see them through the console is a show stopper. Has anyone else come across this problem? Can anyone help? At the moment, I'm stumped as to how to solve it!
All the best,
Tim.

Hi all,
This problem was raised with BEA support and a patch produced.
All the best,
Tim.

My 3rd gen ipod nano is not being read by itunes when I plug it into my mac laptop. It says "no name" on the mac screen, I lost all my music on the ipod itself.

My 3rd gen iPod nano is not being read by my iTunes on my mac. When going to sync, the mac screen says "no name". Also I believe I lost all the music on the iPod. When turned on it says "Welcome" as if it is new. I tried to copy all my music into the "no name" folder and then sync. The iPod said it was "syncing".

So does iTunes see the iPod or not? I couldn't quite understand from your post as you said it wasn't, but then said that the iPod was syncing...
B-rock

Please help with ACL "found but not expected," permissions, (and yes I've read /kb/TS1448)

Hi, I am getting this report from Disk Utility when I repair permissions.
They keep coming up even if I run repair permissions multiple times.
Repairing permissions for “SSD ML Clone 928”
ACL found but not expected on “private/var/root/Library”
Repaired “private/var/root/Library”
ACL found but not expected on “private/var/root/Library/Preferences”
Repaired “private/var/root/Library/Preferences”
Permissions repair complete
And, yes I have read Apples Support Page,
"Mac OS X: Disk Utility's Repair Disk Permissions messages that you can safely ignore,"
at:
http://support.apple.com/kb/TS1448
And, these particular ACL's are not listed on that page, as being ones that can be safely ignored.
Can anyone tell me for certain if this is anything I should be worried about, (or not), and if it's a problem, what I can do about it?
Thanks in advance!

OK, I resorted to running ACLr8 1.3
I had found a post about running some terminal commands first, and then restarting in recovery mode, and repairing acl's. It was bit complex.
This app, ACLr8, runs it all in terminal, and without a reboot.
Disk Utility immediately gave a clean report!
ACLr8, had been updated for Lion, but hadn't been for ML.
So although I had some trepidation about running it, my understanding is ML is more of an upgraded Lion than a new OS, so I felt safe taking the risk.
And it paid off!
I suppose it didn't actually fix anything, but hey, out of sight, out of mind!
And therefore, peace of mind.

My iphone 5 is disabled and is not being read by itunes, itunes is giving me a prompt of my passcode, but that screen is not showing, please help me able my iphone.

my iphone 5 is disabled and is not being read by itunes, itunes is giving me a prompt of my passcode, but that screen is not showing, please help me able my iphone.

+Do a DFU recovery:+
+1. Open iTunes.+
+2. Connect the iPhone+
+3 Press both the home and sleep/wake buttons until the Apple icon appears (ignore the red slider if it shows).+
+4. Continue pressing the home button alone until iTunes sees your phone in recovery mode.+
+5. Follow the prompts to restore the iPhone.+
If not, take it down to mobile dealers that can reset your phone for you. All data will be lost.

ACL found but not expected.................

I powered up my iMac (intel) and I got a blank white screen - up until this point it would be up and running in a second or two so this was a shock. I forced a shut down and had to restart a couple of times before I got a white screen with the apple and then it started up. I repaired permissions thinking it might need it (don't know why - nothing had changed that I know of) but I got this mess:
ACL found but not expected on "System/Library/User Template/English.lproj/Sites".
Warning: SUID file "System/Library/CoreServices/RemoteManagement/ARDAgent.app/Contents/MacOS/ARDAg ent" has been modified and will not be repaired.
ACL found but not expected on "System/Library/User Template/English.lproj/Desktop".
ACL found but not expected on "System/Library/User Template/English.lproj/Documents".
ACL found but not expected on "System/Library/User Template/English.lproj/Downloads".
ACL found but not expected on "System/Library/User Template/English.lproj/Library/Application Support".
ACL found but not expected on "System/Library/User Template/English.lproj/Library/Assistants".
ACL found but not expected on "System/Library/User Template/English.lproj/Library/Audio/MIDI Drivers".
ACL found but not expected on "System/Library/User Template/English.lproj/Library/Audio/Plug-Ins/Components".
ACL found but not expected on "System/Library/User Template/English.lproj/Library/Audio/Plug-Ins/Digidesign".
ACL found but not expected on "System/Library/User Template/English.lproj/Library/Audio/Plug-Ins/VST".
ACL found but not expected on "System/Library/User Template/English.lproj/Library/Audio/Plug-Ins".
ACL found but not expected on "System/Library/User Template/English.lproj/Library/Audio/Sounds/Alerts".
ACL found but not expected on "System/Library/User Template/English.lproj/Library/Audio/Sounds/Banks".
ACL found but not expected on "System/Library/User Template/English.lproj/Library/Audio/Sounds".
ACL found but not expected on "System/Library/User Template/English.lproj/Library/Audio".
ACL found but not expected on "System/Library/User Template/English.lproj/Library/ColorPickers".
ACL found but not expected on "System/Library/User Template/English.lproj/Library/Compositions".
ACL found but not expected on "System/Library/User Template/English.lproj/Library/Favorites".
ACL found but not expected on "System/Library/User Template/English.lproj/Library/FontCollections".
ACL found but not expected on "System/Library/User Template/English.lproj/Library/Fonts".
ACL found but not expected on "System/Library/User Template/English.lproj/Library/iMovie/Plug-ins".
ACL found but not expected on "System/Library/User Template/English.lproj/Library/iMovie/Sound Effects".
ACL found but not expected on "System/Library/User Template/English.lproj/Library/iMovie".
ACL found but not expected on "System/Library/User Template/English.lproj/Library/Input Methods".
ACL found but not expected on "System/Library/User Template/English.lproj/Library/Internet Plug-Ins".
ACL found but not expected on "System/Library/User Template/English.lproj/Library/Keyboard Layouts".
ACL found but not expected on "System/Library/User Template/English.lproj/Library/Preferences".
ACL found but not expected on "System/Library/User Template/English.lproj/Library/Printers".
ACL found but not expected on "System/Library/User Template/English.lproj/Library/Screen Savers".
ACL found but not expected on "System/Library/User Template/English.lproj/Library/Sounds".
ACL found but not expected on "System/Library/User Template/English.lproj/Library/Voices".
ACL found but not expected on "System/Library/User Template/English.lproj/Library".
ACL found but not expected on "System/Library/User Template/English.lproj/Movies".
ACL found but not expected on "System/Library/User Template/English.lproj/Music".
ACL found but not expected on "System/Library/User Template/English.lproj/Pictures".
ACL found but not expected on "System/Library/User Template/English.lproj/Public".
ACL found but not expected on "Library".
ACL found but not expected on "Applications/Utilities".
ACL found but not expected on "Applications".
Is this a sign of something fishy? Or not?

It is normal for Leopard according to the guys at the Genius Bar. According to them, in disk utilities, once you run verify and then repair, everything is fine and dandy, no matter what is left written. You can run this command in the terminal and then run disk utilities and it does remove most of the lines that you see.
:sudo chmod -R 755 /System/Library/Extensions && sudo chown -R root:wheel /System/Library/Extensions
You must have administrative previleges to run the command. It worked for me, but not for long....

Ipod not being read and freezing

When I plug my ipod into my computer, it goes to "do not disconnect" but not the flashing do not disconnect. Its frozen. My computer wont read it. So I unplug it and its frozen. I know how to restart it but that doesnt help me from when it freezes again once I hook it up. How do I stop it from freezing and not being read. Thanks

i am having a similar problem with my 4g 20G
it freezes when i try to update. i thought maybe it was the latest version of itunes i recently installed but i reverted back to an old updater version and itunes 6 and while i was able to get 300 songs on the ipod without freezing, when i tried to put the rest of my library on there it freezes. i've even tried to put as little as 15 songs on at a time and that still freezes the ipod.
i have a mac powerbook with macos 10.2

I am trying to delete songs from itune 11 library and i want it to delete the song from my hard drive as well. All my songs are in the music folder but not in the itunes folder?? itunes did not prompt me to move file to trash nor is there an option??

I am trying to delete songs from itune 11 library and i want it to delete the song from my hard drive as well. All my songs are in the music folder but not in the itunes folder. itunes did not prompt me to move file to trash nor is there an option to remove file to trash bin. How can i delete songs from both the itunes and hard drive at the same time?

aespinoza2210 wrote:
could it be in the itunes folder or does it have to be in the itunes media folder, which is within the itunes folder??
A Espinoza,
The iTunes Media folder is set in Preferences > Advanced, and is the key to most iTunes folder organizational activities. So I doubt that the automatic deletion will work for files that are somewhere else within the folder structure.
However, I have not experimented with that issue in quite a while, so you are welcome to give it a try in iTunes 11.

Updateable Report/Pagination - rows found but not displayed

Bear with me if there is a post that covers this, as the SEARCH facility seems to be hanging when I search on Pagination.
I have a SQL Query (PL/SQL Function Body Returning SQL Query) which creates an Updatable Report.
If I run the Query and the selection criteria results in more than one page in the "search results" and then I go to page 2 or page 3, etc and then peform another search that only results in 1 page of "search results", the actual search results will not display, but the pagination will show the number of rows that should be displaying.
For example, I search on Coroner "John Black", which returns 55 rows. The first 50 are displayed. The next 5 are on page 2. If I then searchon Coroner "Jim Bean", 22 rows are returned (all on page 1). If I then search on "John Black" again, and this time, go to page 2 (to see the final 5 rows in the result set) and then search on "Jim Bean", I won't get any data in the report for Jim Bean, but a message showing that there are 22 rows of data. However, I cannot get that data to show (even if I select NEXT or PREVIOUS for the pages.
Then if I go back and select on "John Black", get the same problem. I basically have to sign out completely in order to get this reset.
Note that the problem occurs if you are on a page greater than that of the result set on the next query. For example, if I am on page 3 of 5 pages and perform another selection that has 3 pages, it is fine. But if the result set only has 2 pages, the form becomes confused.
If the "Layout and Pagination" has a "Pagination Scheme" set to "Row Ranges X to Y of Z (no pagination)" I get an error like "Minimum row requested: 2401, rows found but not displayed: 46".
If I use "Row ranges 1-15 16-30 (with set pagination)" I get "1-46" as a hyperlink, which if I click on, will show me the report.
If I use "Row ranges 1-15 16-30 in select list (with pagination) I have a problem.
If I use "Row Ranges X to Y (no pagination) I have problems.
If I use "Row Ranges X to Y of Z (no pagination) I have problems.
If I use "Row Ranges X to Y of Z (with pagination) I have problems.
Basically, the one one that seems to work is those that have a hyperlink. Uing NEXT, PREVIOUS or a select list does not seem to work.
Do you know what is causing this problem?

I have the same issue, but cannot resolve it following above suggestions. I have a report page with search criteria and a "Go" button to submit the search. The branch back to the same page has "reset pagination for this page" checked, but still if run a query that returns just one row after having paged forwards, I get no rows displayed and a pagination link "1-1" that when clicked brings up the selected row.
I tried adding a "Reset Pagination" process to run on submit (unconditionally), and it made no difference.
I am using HTMLDB 2.0.

XML file not being read by Accordion Demo

I had this working last week and it was a beautiful thing. I
subsequently added many more product items to the products.xml file
and resent it, now the products.xml file is not being read by the
index page. I have read all the posts and added all the suggested
fixes -
added {useCache: false} to result in var dsProductFeatures =
new Spry.Data.XMLDataSet("products.xml", "products/product[name =
'{dsProducts::name}']/features/feature",{useCache: false})
added <cfheader name="Cache-Control" value= "no-cache">
<cfheader name="Expires" value="0">
<cfheader name="Pragma" value="no-cache"> to header
added var d = new Date();
var cToday = d.getSeconds();
var spryURL = "
http://localhost:8500/SpryMe/Sample1/employees.xml?cacheBuster="
+ cToday; to header
but my xml file is not being read. The script is running
because the little fields on the right are moving.
Any suggestions would be greatly appreciated!

Hi,
What's happening if you open the xml page (employees.xml)
directly in browser. Are you able to see all the records? Is the
XML valid?
Regards,
Dragos.
PS: do you have a public URL where we can see that?

Write permissions issues / lots of "ACL found but not expected" errors / hardware failure? on brand new Mac Mini (still within warranty). OSX Mavericks 10.9.1.

I was hoping that I could receive some feedback from you fine folks here
My situation:
I bought a 2012 Mac Mini 2.6 Ghz Intel Core i7 from the online Apple store. It came with Mavericks 10.9.1 pre-installed and was delivered two days ago (I know, the mini update is evident but I needed the machine).
I noticed that I had to enter my password every time I created, moved or deleted a folder. I did not think much of it.
I did, however, think much of not being able to install files from certain developers. I received the "The installer is damaged" notification as shown in this topic: https://discussions.apple.com/thread/5541793
This screenshot is someone elses, I tried to install audio software.
Based on that error, I contacted the developer of the software. But then I noticed that I got the same error for other developers too.
I tried the solution that the topic starter marked as solving his issue in https://discussions.apple.com/thread/5541793. It involves booting in OSX Recovery (command+R) and excecuting the 'resetpassword' command. That did not work for me. It also looks like my password data isn't stored as I do not see the 'obfuscated' password dots that the screenshot shows in that topic, even when I entered and saved it multiple times -- but I'm not sure if that is part of the main issue (which I'm gettting to).
I also made sure gatekeeper allows applications to be installed from unidentified developers, as shown here: http://www.instantteamspeak.com/static/en/img/mac-gatekeeper-anywhere.png That didn't help either.
Next I opened up Disk Utility and ran a check on write permissions. That got me worried.
The check ran for a long time, spitting out "ACL found but not expected" errors.
I proceeded to restore write permissions. That took 20-25 minutes.
Once it finished I checked write permissions again. An equal amount of permissions needed to be restored! It's as if Mavericks didn't remember anything it did.
The good news is that I could now install the files I previously couldn't, but the fact that I've restored write permissions three times now, and each time it seems as if nothing of that is remembered, has gotten me worried.
I've made a video with some explanation here http://youtu.be/a0hKQvy-Km8 - my sincerest apologies for the shaky camera.
I then checked the hard disk and the partition above it. The Macintosh HD gave me the green 'ok' light, but something weird happened when I checked the partition on the level above it. It will take ages to finish and I see Disk Utility doing some strange 'jumping around': http://youtu.be/hyLAEhLRnKc (warning - long video so you might want to skip through it. The point is to demonstrate how long it takes).
When I checked the hard disk for a second and third time, I got 'everything ok' results pretty quickly.
Checking both the HD and the partition above it again, this is what happens (and what now worries me the most): http://youtu.be/4l2Fb2RvOW4
Edit: I sum up my findings at the end of the video, might be better to skip here and then watch the full thing only if it's not clear yet.
There is some further explanation in the video. It basically comes down to Disk Utility not finishing/not providing any conslusion, while Activity Monitor shows it's not doing anything -- please bare with me when watching the video, I know it's not the most exhiting video ever posted on YouTube but it does bring my point across (there is some more talk in this one; not sure if that's an improvement in terms of entertainment value though ).
** Is my hard disk failing? In that case I'll return the Mac immediately.
** Or just a software issue?
As said, this Mac Mini is brand new. If at some stage anyone would feel the wise thing to do is to return my Mac, please do let me know. There is a 14 day return policy in The Netherlands (on top of other warranties) and I'd rather return it in case of doubt, than end up with technical issues with this machine once I've started working with it. I'm ok with doing some troubleshooting if the machine is fine, but I'd rather not take a gamble with a 1200 € machine under warranty.
Thank you so much in advance - your help is highly appreciated.
Paul

I was hoping that I could receive some feedback from you fine folks here
My situation:
I bought a 2012 Mac Mini 2.6 Ghz Intel Core i7 from the online Apple store. It came with Mavericks 10.9.1 pre-installed and was delivered two days ago (I know, the mini update is evident but I needed the machine).
I noticed that I had to enter my password every time I created, moved or deleted a folder. I did not think much of it.
I did, however, think much of not being able to install files from certain developers. I received the "The installer is damaged" notification as shown in this topic: https://discussions.apple.com/thread/5541793
This screenshot is someone elses, I tried to install audio software.
Based on that error, I contacted the developer of the software. But then I noticed that I got the same error for other developers too.
I tried the solution that the topic starter marked as solving his issue in https://discussions.apple.com/thread/5541793. It involves booting in OSX Recovery (command+R) and excecuting the 'resetpassword' command. That did not work for me. It also looks like my password data isn't stored as I do not see the 'obfuscated' password dots that the screenshot shows in that topic, even when I entered and saved it multiple times -- but I'm not sure if that is part of the main issue (which I'm gettting to).
I also made sure gatekeeper allows applications to be installed from unidentified developers, as shown here: http://www.instantteamspeak.com/static/en/img/mac-gatekeeper-anywhere.png That didn't help either.
Next I opened up Disk Utility and ran a check on write permissions. That got me worried.
The check ran for a long time, spitting out "ACL found but not expected" errors.
I proceeded to restore write permissions. That took 20-25 minutes.
Once it finished I checked write permissions again. An equal amount of permissions needed to be restored! It's as if Mavericks didn't remember anything it did.
The good news is that I could now install the files I previously couldn't, but the fact that I've restored write permissions three times now, and each time it seems as if nothing of that is remembered, has gotten me worried.
I've made a video with some explanation here http://youtu.be/a0hKQvy-Km8 - my sincerest apologies for the shaky camera.
I then checked the hard disk and the partition above it. The Macintosh HD gave me the green 'ok' light, but something weird happened when I checked the partition on the level above it. It will take ages to finish and I see Disk Utility doing some strange 'jumping around': http://youtu.be/hyLAEhLRnKc (warning - long video so you might want to skip through it. The point is to demonstrate how long it takes).
When I checked the hard disk for a second and third time, I got 'everything ok' results pretty quickly.
Checking both the HD and the partition above it again, this is what happens (and what now worries me the most): http://youtu.be/4l2Fb2RvOW4
Edit: I sum up my findings at the end of the video, might be better to skip here and then watch the full thing only if it's not clear yet.
There is some further explanation in the video. It basically comes down to Disk Utility not finishing/not providing any conslusion, while Activity Monitor shows it's not doing anything -- please bare with me when watching the video, I know it's not the most exhiting video ever posted on YouTube but it does bring my point across (there is some more talk in this one; not sure if that's an improvement in terms of entertainment value though ).
** Is my hard disk failing? In that case I'll return the Mac immediately.
** Or just a software issue?
As said, this Mac Mini is brand new. If at some stage anyone would feel the wise thing to do is to return my Mac, please do let me know. There is a 14 day return policy in The Netherlands (on top of other warranties) and I'd rather return it in case of doubt, than end up with technical issues with this machine once I've started working with it. I'm ok with doing some troubleshooting if the machine is fine, but I'd rather not take a gamble with a 1200 € machine under warranty.
Thank you so much in advance - your help is highly appreciated.
Paul

I have an iphone 5s and it is synced to itunes and works fine. previously I have downloaded audiobooks to my wifes 6th gen nano using this account - now I tunes does not recognize the device and also it seems that it is not being read by the computer?

I have an iphone 5s and it is synced to itunes and works fine. previously I have downloaded audiobooks to my wifes 6th gen nano using this account - now I tunes does not recognize the device and also it seems that it is not being read by the computer?

Hey Stan1958,
Thanks for the question. I understand you are experiencing issues with your iPod nano and iTunes. Based on your symptoms, you may find the following resources helpful in resolving this issue:
Windows
iPod appears in Windows but not in iTunes
iPod not recognized in 'My Computer' and in iTunes for Windows
iTunes reports that "iTunes cannot recognize this iPod at this time"
Thanks,
Matt M.

My Ipod touch is not being read by Itunes?

I get this message about and Iphone (not being read) but my ipod touch just being read. It's a 32GB model.
It was reading the first few times, and then it stopped all of a sudden.
I also attempted to follow the instructions for getting help (No luck, uninstalling the Itunes resteting the Ipod, nothing seems to be 'working'.

Did you follow the instructions here:
iPhone, iPad, or iPod touch: Device not recognized in iTunes for Windows
Have you tried another computer for troubleshooting purposes?

Video Ipod not being read by CPU(Need Help other post did not help)

My 30G Ipod is not being read by the coumputer, I tunes, or even the Ipod restore software. When i plug in my pod it turns on and charges...i can play music. When i turn it off there is a battery symbol and it says charging...i reinstaled ipod software...i did the two button reset, i tried it on all four of mr PC's Oh yeah...it make a soft high pitch noise when it charges.

I can't help I'm afraid! I have exaclty the same unresolved problem and getting severely miffed that a £300 product has suddenly became a heap of junk.
See it on ebay soon!

Music found, but not being read

Similar Messages

Maybe you are looking for