Music from Creative Media Source

I purchased a Creative Zen touch a year ago and have all my music organized on their version of itunes which is called creative media source. I just bought an ipod video and need to know how to transfer all of my music from Creative to itunes and then of course to my ipod. Is it possible to transfer all the music I have on Creative to itunes?

Sure, if they are not protected WMP files.
Drag the audio files from the folder to the Library in the Source list
or choose File > "Add File to Library" and select the song file or folder.

Similar Messages

Creative Media Source - PC Music Library Corrupt

0Creative Media Source - PC Music Library Corrupt? After doing some backup utilities on my music archi've, and relocating them to a new larger dri've, I am now receiving messages that my PC Music Library is corrupt, and is unusable. All of my playlists are gone, and I can't make new ones. it attempts to access a backup copy of the PC Music Library, fails at that as well, then reports it will make a new one. This fails as well, and the message recommends to repair the Microsoft jet Databse Engine and the MDAC, etc.
So naturally, I go to the Microsoft website, as instructed by Creative, and that's about as useful as you'd expect...none.
I have attempted to delete what remains of the old one, both via Media Source and Windows (XP),? and have even reinstalled media source. The problem persists. I'm less concerned about recovery of the old playlists than I am simply starting over with new ones (it was time for a redo anyways).
Media Source itself works fine in all other apsects. It can read files, play music, and interact with my Creative Zen Xtra device. But it's all useless if I can't make playlists for use on the PC and transfer to the Zen.
Anyone have any ideas? I just want to be able to use my stuff again.

Re: Creative Media Source - PC Music Library Corruptn Wasn't aware that it was possible, and haven't seen anything that tells how it could be done. Typically I make my playlists in Creative Media Center, in Organizer mode. As I'm pawing through the archi've and want to add a specific track to a playlist, I? right-click>add to playlist, select the playlist from the drop-down, and move on.
After deleting the old corrupted playlist files, and starting over from scratch, here is what happens:? I attempt to add a track to a playlist...no playlists exist, so I create one on the spot. Upon submitting the info, CMS crashes. ? I reopen CMS, now the PC Music Library is corrupted again, the backup is corrupted, and no playlists exist, etc. At that point, I can delete the playlist files again, and start the process over again (resulting in the same: CMS crashes and I have corrupted playlists.)

How to play MPEG4 music files using Creative Media Source

I use iTunes store for buying music pretty much and receive files in MPEG4 format.
Instead of converting to MP3 I would prefer that my Creative Media Source player/organiser could handle the MPEG4 format. I'm using the Media Source player with an Audigy2ZS and sometimed the older Soundblaster-USB for notebooks.
Is there an upgrade that I have overlooked or ...
Or shall I buy a more professional player, like BMP studio?
I don't like the iTunes player very well!
/Peter

I use iTunes store for buying music pretty much and receive files in MPEG4 format.
Instead of converting to MP3 I would prefer that my Creative Media Source player/organiser could handle the MPEG4 format. I'm using the Media Source player with an Audigy2ZS and sometimed the older Soundblaster-USB for notebooks.
Is there an upgrade that I have overlooked or ...
Or shall I buy a more professional player, like BMP studio?
I don't like the iTunes player very well!
/Peter

Where is creative media source music stor

I'm sure this is a really easy question to answer. I can't locate my music anywhere on my hard dri'ves. I can see the music through the library on Creative Media Source, but I can't get to it by any other means (which means I can't play the music stored on CMS with Real Player or WMP). Where are these files? How can I copy them over to an easily accessible?My Music folder?

keridwyn,
? On my PC, MediaSource music files and albums are stored in the same default path listed when I save a new recording. If you haven't already, try making a short recording, save it, and note the default path offered.

The launch feature of Creative Media Source 5.

I need to clarify my question. I was able to install components of the latest version of Creative Media Source 5 from the WEB. All but the Go! feature seem to work OK!? Am I missing something or am I doing something wrong? I hilight that section in the menue bar but nothing happens. Can anyone help me with this issue?

Cheese32 wrote:
Yes I realize that--I'm thinking more specifically that CMS5 doesn't play well with SP3? The problem with your solution is that I don't like WMP. At least, I don't like the fact that you can't play your music straight from your device. You have to sync your device and copy all of your music onto your hard dri've to play from the device connected to the computer. That was mainly what I used CMS5 for--playing music directly from my device through the computer?without having to copy all of its contents onto my hard dri've. I keep my music stored on my Zen Microphoto so it doesn't take up space on my computer...
I would Google the errors & see what comes up.. I'm fairly certain that Sp3 probably included WMP with it so that may be the source of the conflict if you installed it. Since it was a reinstall I don't know if you'll be able to install WMP0 instead.You could try that & see if that hel
ps.
If you don't have backup copies of your music(cd or external dri've)you should do so. If the player's hardri've ever fails for whatever reason at least you will have an archi've & not lose all your files.

Creative Media Source 5 Install Problems

(Creative Media Source 5 Install ProblemsM I've looked through some of the other install issues and can't seem to find my problem, but apologize if this is somewhere I did not find... I had installed and have been running CMS5 on my desktop for a while. Recently I had to reformat my hard dri've and reinstall Windows from scratch. Upon trying to install CMS5 on my Windows XP SP3 system, I got a bunch of errors basically saying something to the effect of "Installation is unable to continue because of one or more unresolved issues....."? Then it lists a file TagMgru.mft. After cancelling that error, they continue to come up for Id3Tagu.mft, WmaTagu.mft, OggTagu.mft, Mp4Tagu.mft. The error message comes up twice for each of the listed files, and then the installation does not complete. Any ideas? I was using an install file downloaded from Creative's [email protected]

Cheese32 wrote:
Yes I realize that--I'm thinking more specifically that CMS5 doesn't play well with SP3? The problem with your solution is that I don't like WMP. At least, I don't like the fact that you can't play your music straight from your device. You have to sync your device and copy all of your music onto your hard dri've to play from the device connected to the computer. That was mainly what I used CMS5 for--playing music directly from my device through the computer?without having to copy all of its contents onto my hard dri've. I keep my music stored on my Zen Microphoto so it doesn't take up space on my computer...
I would Google the errors & see what comes up.. I'm fairly certain that Sp3 probably included WMP with it so that may be the source of the conflict if you installed it. Since it was a reinstall I don't know if you'll be able to install WMP0 instead.You could try that & see if that hel
ps.
If you don't have backup copies of your music(cd or external dri've)you should do so. If the player's hardri've ever fails for whatever reason at least you will have an archi've & not lose all your files.

Creative media source-How to apply audio cleanup permanant

I have some older blues in mp3 format that I have downloaded and some that I have ripped from cd. They have alot of hissing and "noise" in the background, when in creative media source organizer, I use audio clean-up button to get rid of hissing and noise, but if I want to burn those songs to cd, how do I apply the audio clean up to the file.
Also It mentioned in all of the advertising that you can "super rip" your audio cd's, which I have done, but it also says you can permanantly change your whole music "library" into better quality (I am assuming using crystalizer), but how do I permanantly apply these settings to the music files on my hard dri've. Does any one know how to do this, or if there are any good "links" or tutorials I should look at, thanks in advance for replys.

No, you cannot apply audio clean up permanently to the files. Audio clean up is a unique feature of MediaSource's playback. The noise will be removed by MediaSource before MediaSource plays the audio. However, the physical file is not changed at all. One trick you can use is to record What U Hear while playing the files with clean up enabled. This way, you can record the clean audio.
SuperRip's audio enhancement cannot be applied permanently to your existing files. You can use the same trick of recording What U Hear.

Creative Media Source takeover attem

I have a Zen V Plus, use Windows XP, and have Creative Media Source and Windows Media Player on my desktop. I use Winpatrol to monitor my startup activities, and lately it has been popping up a msg that says Creative is trying to become the default .MP3 file association. I use Media Player for managing my music and audiobooks. I keep telling Winpatrol to not allow the change, but I would like to know how to get the attempts to stop. The wonderful folks at Creative customer support? have told me that my free period has ended, but they would be happy to take my money and attempt to give me an answer. They are not going to get any.

Cheese32 wrote:
Yes I realize that--I'm thinking more specifically that CMS5 doesn't play well with SP3? The problem with your solution is that I don't like WMP. At least, I don't like the fact that you can't play your music straight from your device. You have to sync your device and copy all of your music onto your hard dri've to play from the device connected to the computer. That was mainly what I used CMS5 for--playing music directly from my device through the computer?without having to copy all of its contents onto my hard dri've. I keep my music stored on my Zen Microphoto so it doesn't take up space on my computer...
I would Google the errors & see what comes up.. I'm fairly certain that Sp3 probably included WMP with it so that may be the source of the conflict if you installed it. Since it was a reinstall I don't know if you'll be able to install WMP0 instead.You could try that & see if that hel
ps.
If you don't have backup copies of your music(cd or external dri've)you should do so. If the player's hardri've ever fails for whatever reason at least you will have an archi've & not lose all your files.

Creative media source organizer H

I have a Zen extra. I view the music I have on my harddri've using the creative media source organizer.
It shows the title, file size, type and date. I am trying to edit the properties to show more items, such as artist and album. Nothing works, I cant add these items. When I view this same music using windows explorer, the artist and album appear. Why wouldnt they show up in the Creative Media Organizer?

Azhat is referring to his PC hard disk. So, he is actually talking about MediaSource's My Computer. I cannot remember whether MediaSource v2 allows viewing of additional columns in My Computer; MediaSource v3 allows that.
Azhat, you can actually add the tracks from MediaSource's My Computer to MediaSource PC Music Library. You can then view additional track information by right-click to view more columns (as suggested by SSR).

Creative Media Source + Windows XP Media Cen

I have always used the Creative Media Source as an audio player and as a method of creating playlists etc.
I just recieved a New Dell XPS400 with a Dell installed Soundblaster X-Fi Extreme Music card. This machine has WinXP Media Center Edition installed as an operating system, for which I did a clean re-install. In reistalling the software from the Creative disk that was supplied with the computer I noticed that Creative Media Source was not included as part of the package. I further noticed that the in the download section of the website that this isn't an available download for the Win XP Media Center OS, even though it is available for Win XP Home edition.
Is there a compatibility problem in using the Creative Media Source with this OS ? Is there a conflict with the other Creative software that is typically installed with this card? In case it makes a difference; in playing back wav and mp3 audio files I am not interested in opening up the Win Media Center interface in order to play those files or create playlists, I simply want to associate those audio files to open and play with the Creative Media Source as I have always done with previous versions of Windows XP.
Thanks for any advice and clearification !

Hi m8. Just install the Windows XP version (Professional), and it will work, as I use Creative Media Source with Windows Media Center 2005, no problems. After, try the "product update" under support on the creative site, to see if there are any new things to update, just incase.
cause_of_chaos

Monitor point of Creative Media Sourc

I had Creative Media Source 2 before and when I transfer vinyl record using the cleanup feature, I was monitoring the sound after the cleanup process.
Therefore, I was able to compare the change in quality by listening to my Hi-Fi and my computer. Now, After upgrading to Media Source 5, my monitor point is now at the input line before the cleanup process. Anyone know how to change the software setting so I can monitor the audio after the cleanup before the actual recording is done?vinylrecord

Ok.... I tried many times to put the PlaysForSure "firmware" on my actual player (I have version .0.03). The problem is I can not figure out how to actually put the firmware onto my MP3 player. Can someone please help me with this as I am leaving for Iraq VERY soon and I need to get the MP3 player to be recognized by Creative 5 and Windows Vista (32-bit). Thanks in advance.
BrianY wrote:
If you're new laptop is a Vista system, you won't have to load any software drivers for the Touch, but you'll have to update your Touch to PlaysForSure firmware since Creative doesn't do Vista drivers for the MP3 players. If your laptop is an XP system, and you're on V.x firmware, you'll need to load the drivers so that MediaSource can recognize the Touch.
lemondrop wrote:
My question is since now I have Creative Media Source 5 (along with Creative Li've! Cam and Sound Blaster Audigy) do I even need to load the Creative Zen Touch software on my new laptop inorder to transfer music files from my MP3 player and my laptop. Thank you in advance.

Creative Zen and Creative Media Sourc

A couple of years back I bought a creative MP3 player and it came with Creative Zen Touch software. Just recently I purchaed a new laptop that came with Creative Media Source 5. I used to use the Creative Zen Touch to load my music cds and transfer files from my computer and my MP3 player. My question is since now I have Creative Media Source 5 (along with Creative Li've! Cam and Sound Blaster Audigy) do I even need to load the Creative Zen Touch software on my new laptop inorder to transfer music files from my MP3 player and my laptop. Thank you in advance.

Ok.... I tried many times to put the PlaysForSure "firmware" on my actual player (I have version .0.03). The problem is I can not figure out how to actually put the firmware onto my MP3 player. Can someone please help me with this as I am leaving for Iraq VERY soon and I need to get the MP3 player to be recognized by Creative 5 and Windows Vista (32-bit). Thanks in advance.
BrianY wrote:
If you're new laptop is a Vista system, you won't have to load any software drivers for the Touch, but you'll have to update your Touch to PlaysForSure firmware since Creative doesn't do Vista drivers for the MP3 players. If your laptop is an XP system, and you're on V.x firmware, you'll need to load the drivers so that MediaSource can recognize the Touch.
lemondrop wrote:
My question is since now I have Creative Media Source 5 (along with Creative Li've! Cam and Sound Blaster Audigy) do I even need to load the Creative Zen Touch software on my new laptop inorder to transfer music files from my MP3 player and my laptop. Thank you in advance.

Creative media source and Live!

Does anybody knows what is list of selected cards that can use crossfading in Creative media source?
Why Li've! 5. cannot? Not even EAX?
Thanks in advance

If you have the newer 24-bit versions of the Li've cards then disregard the following.
Perhaps you've installed some of that updated modded stuff? (I've tried it at times too, but always returned to the official 252 driver/software Uni-Pack stuff.)
The software you've got is not designed for the Li've series of cards. If you used the official cd's for the Audigy 2 series (not ZS), it all works as long as you choose not to install EAX Console and Speaker Calibrator. You should also not install MediaSource Player, choosing instead the PlayCenter 3.02.52 and , on XP, updating it to 3.02.70.
You'll probably need to use the ctcomp.exe (search) on the Audio\language\Setup\Setup.exe file. So you'd need the cd copied to a folder on your harddri've so you can let ctcomp adjust the files.
Then you run AudioHQ and choose to run on startup and load in systray in the options dropdown and use the EAX Control applet to control your effects. The AdvancedEQ effects work as long as you choose the effect, click the ParametricEQ in the center, then tick the volume slider tab with your mouse, exit and save. You need to do this everytime you apply an effect.
Or, you can install the U-UPAX stuff which has been modded (driverheaven forum for links). I believe MediaSource works with their setup.
I'm telling you though, your card will not give you any extra stuff it is not hardware designed to provide. So, you still only get EAX and 2, no Advanced HD EAX 3 or 4.
And, the sound quality for music is superior with the official 252 Li've Uni-Pack setup. Unless you like overwhelming, booming bass and the midrange missing sounds. Those updated Audigy 2 and up drivers may have settings and files for the Li've, but they are tuned for the Audigy 2 and up.
The 3 best optimizations made for the Li've were the old Li'veware 3.0 vxd drivers, the APS mod for the Li've (both for 9x), and the kXProject drivers (for XP). By far the most problem free software package was the Li've Uni-Pack. And it sounds okay.
So there you go. Now, if after you uninstall whatever you've got, the setup file of the package you select doesn't say "No SoundBlaster hardware installed" you'll be lucky. Modern Creative drivers oftentimes remove something when uninstalled that messes up the hardware detection and if installing with CTZAPP doesn't magically let the software setup recognize the card again then only a format will fix it.

Creative Media Source Prob

Whenever I transfer albume to and from my Zen V Plus, Media source insists on adding the album title to the song name. This makes very long titles which can't be easily read in the Zen V. I have tried a number of transfers, and media source always appends album names to song titles. Is there a way around this, or is this Creative Media Source bug. It's a real pain to have to edit every title on every transfer. Thanks for any clues.My Zen V firmware and Media Source software are up to date.

Which mediasource did you download? I believe you have downloaded the mediasource installation mean for their MP3 player and that's why you cannot install. Their sound card mediasource don't have any standalone installation as far as I know. If you need, you will need to install the mediasource from your installation CD. If you don't have the installation CD, you can download the ISO CD image here.
http://forums.creative.com/creativelabs/board/message?board.id=soundblaster&message.id=8433

Creative Media Source 5 SVM Time Scale Clean Up Prob

hi, im Using the Creative Sound Blaster Li've! 24 Bit sound card and using Creative Media Source Player 5 to play my?audio and video files. I get a problem, however, when i start to play a song from my Library,?The first message reads(this is when i double click to song to play it): Exception --CreateObject : Exception:ObjectNotFound? from:CTimeScaleFilter Message:"Could not load Time Scale Filter" (after that message it tells me when this problem happened)?The second one reads(after i click ok): Exception --CreateObject : Exception:Undefined? from:CNoiseReductionFilter? Message:"Could not load Noise Reduction filter"? (and then the time it happened)?Third Message reads: Exception --CreateObject : Exception:Undefined? from:CSvmFilter? Message:"Could not load Time Scale Filter" (and then the time it happened)?does anyone know why this happens when i play a song from my playlist or otherwise? and right after i stop playing the song, i can click on the time scale, svm, and clean up like nothin happened, i can change the settings and what not....its really starting to tick me off because it Just worked, and then i closed out of the program and started it back up again, and now it Doesnt work, please help, and it would be awesome if i could fix it without reinstalling the sound card, its drivers, and the like...

Ok, followed your instructions, installed media source direct from the cd from explorer from directory CMS/Setup to the setup.exe file. Intall took longer this time, but, still no Creative Media Source installed -
still have the same problem. Still need more help.

Music from Creative Media Source

Similar Messages

Maybe you are looking for