Music missing after "Rebuild"

I have had a 30gb Zen Vision:M for about 4 years now and recently I turned it on and when it started up the screen said it was "Rebuilding".After it was done "Rebuilding" there were no songs in the Music Library. I still had all my Videos and Pictures which were playable but ALL the songs were gone.So,I plugged it into computer and opened up the Music folder on MP3 player and ALL the songs were in this folder.So,I went to Creative.com and downloaded the MP3 Recovery Tool which only updated firmware and still this did not work. So,I made a copy of ALL of the songs and "Formatted" the MP3 player and also did a "Disk Clean Up" and then put ALL the Music back into the "Music Library" folder. Still nothing shows up on the MP3 player but when the MP3 player is connected to Computer the "Music Library" folder has ALL the Music that I placed in this folder. Is there anything else I can do to regain the Music on MP3 player? The Firmware version is .62.02e. Any information on the issue will be Greatly Appreciated. Thank You for Your time.

You can redownload iTunes purchases by:
Downloading past purchases from the App Store, iBookstore, and iTunes Store
For other music you will have to get them from where you obtained them the first time.

Similar Messages

Mail missing after Rebuild

Hi All,
Having problem with the Mail.app
All my mails were missing after I ran the rebuild function.
I think the old mails were somehow hidden from the inbox as i noticed the the size of inbox.mbox is 1.22GB, whereas the latest INBOX is only 240mb.
How do I bring back all my old mails?
Mail.app v 1.3.11
OS 10.3.9
Many thanks.
Cheers

Hi mercuryfin.
I'm sorry you've been left out in the cold. For some reason your post has gone by unnoticed, maybe because there are many threads discussing problems similar to the one you're having. Read the following article (and the articles it links to) to better understand the problem and how to fix it:
http://discussions.apple.com/thread.jspa?threadID=121837
Unfortunately, one of the side effects of trying to fix your problem as suggested in the article is that a lot of previously "deleted" messages may reappear and you'll have to delete them again. If you wish, we can try a slight variation of the procedure described there to see whether that side effect could be avoided -- I haven't tried it before, but it won't cause any data loss, at worst it'll just not work and we'll have to do what the article suggests.
Let me know if you need any clarifications or want to try the alternative approach I'm suggesting. If the latter, start by quitting Mail and, in the Finder, go to HOME/Library/Mail/. Locate the folder of the account that contains the largest Inbox -- its name starts with the account type (POP, IMAP, Mac), followed by the account username and the incoming mail server. Open the account folder, locate the file INBOX.mbox, right-click or ctrl-click on it and choose Show Package Contents. Now, choose Edit > Select All (⌘A), then Edit > Copy (⌘C) and paste it in your reply to this post so that I can see which items are within that mailbox. Tell me also the size of the mbox file that appears there.

Video + music missing after moving iphoto + itunes to external drive

There is probably a really obvious answer to this but I have tried searching without success. I have just moved my iphoto and itunes libraries to an external drive to free up space on my HD. Do I have to do the same with imovie in order for the music and iphoto video clips in my existing projects to work properly? Or can you redirect iMovie 09 to look for these files on the external drive (as you do with iphoto and itunes)?
At the moment in imovie the iphoto video icon still appears under my HD even though I have moved the library and the iphoto video clips and itunes tracks I've used in my projects are now labelled missing with yellow exclamation marks. How do I fix these broken links? I understand I can drag events over to the ext drive but my iphoto videos are not listed as an event.
Many thanks!

UPDATE! According to Apple support, there is no way to re-link those assets. They suggested two options, 1) recreate the folder structure with the missing music on HD1. I tried that but was unsuccessful. 2) Place the music again into the project. I have a lot of music with edits and did not want to use this time consuming approach, but surprisingly after replacing the first song, all the songs updated. Unusual workaround. HTH, Scott

Ipod music missing after upgrading to 5.0 os

After upgrading to 5.0 os on my iphone 4 I have had several problems...
1. all my contacts disappeared and then started to reappear when I would open General > Mail, Contacts, Calendars and then change the Sort Order and then change it back to what I wanted I did this like 3 times and then all my contacts were back
2. It keeps freezing while I am in an app, typing a text, doing just about anything
3. Alot of my music is gone, like the album work is there, the name of the song, the name of the artist but when you go to click to play it, it automatically jumps to the next song or it will play the next song on the list while still showing the other songs album work, title and artist
4. in the ipod the "play triangle" is always there, whether it is playing or not so to pause the music I have to hit the play triangle 3 times before it will stop
this is my problem list so far and I have only had the new os for 3 days....i am afraid as to what more time will show
as for now I am going to try re-sync my phone and maybe it will fix some of the quirks...i already tried a reset and it did not fix the problems...

ipod change to music

Music files missing after sync with iTunes

All of my devices are updated to the last version.
I created playlists to manage syncing music from iTunes to iPhone.
Sometimes my music files would be missing on my iPhone 6 running iOS 8.1 after sync with iTunes 12.0.1.26.
When music missing, they look OK in iOS playlists, but will appear a "waiting for copy” symbol on the right side then jump to next song one by one when I try to play.
It's really weird because it happens randomly, I totally have no idea when it will happen again, more even far from why ...
Zen style APPLE !!

It sometimes takes awhile for the info to download from itunes.
try this:
Reboot the device by pressing and holding down the home and sleep/wake buttons (power) at the same time until the apple logo appears on the screen, then let go.
If that doesn't work then reset the device by going to settings/general/reset/reset all settings

All music in my library are missing after sync.

All music in my library are missing after synch, but it seems that its still in the phone cause I checked memory usage and it doesn't add up. And when I connect it to itunes and checked the memory usage bar in the bottom, it seems that my music was categorized in "Others". I'm using iPhone 5s with the latest OS.

This has just happened to me, I've had songs in Music on my phone for years and suddenly, and randomly, they're greyed out and unplayable. This applies to some playlists and not others, to songs I've played on my phone even in the last week.
Damned infuriating and I can't yet find a resolution - Apple, what have you done this time!

ITunes: Missing Music Files & After Adding Songs It Says It Can't Find Original File

Hi Everyone
I use iTunes to manage my music and after the upgrade just yesterday (11.0.2 (26)), my iTunes library now shows exclamations next to tracks that it can't find anymore.
The tracks are on my external drive where I have always had them, and when I try to add a song back into the library and try to play it, it says it can't locate the original file and asks if I want to try and locate it.When I go back to locate it on my external drive, it does not show up anymore on my external drive. But when I eject my external drive and plug it back in, the folder track is there again on my external drive!!!!
Does anyone else have the same issue here please?

After weeks of working out what the problem was I finally found out. In my case I had recently purchased Paragon NTFS for Mac so that I could write to an NTFS formatted external hard drive. This was where the issue was when iTunes tried to write to the external drive where I keep my iTunes library and iTunes media folders. Every time I tried to download a song from iTunes, it could not write to my external drive and said that the file or folder was in use. The Paragon NTFS for Mac software 'driver' was causing this to happen and as soon as I turned the driver off on the Paragon software admin tool, my problem was solved! Seemed like the driver was locking out iTunes when trying to write. So if anyone else has this issue, turn off the driver when using iTunes. If you are not running Paragon, then perhaps you have a similar conflict with another application.

Link to iTunes Media folder after rebuild

I kept my iTunes Media folder on a separate drive. After rebuilding my system I linked iTunes to my folder (Preferences / advanced) and it doesn't pick it up.

Hi Appletart5000,
Thanks for the update and letting me know it did not resolve the issue for you. I'd say at this point a new library with the media added back might be the way to go. Using the article from earlier, you'd want to create a new library and then locate the media files and add them into iTunes:
Adding music and other content to iTunes
http://support.apple.com/kb/ht1473
Open iTunes
From the File menu, choose one of the following choices:
MacAdd to Library
Windows
Add File to Library
Add Folder to Library
Navigate to and select the file or folder that you want to add
If iTunes is set to "Copy files to the iTunes Music folder when adding to library," iTunes will copy all content that is added to the iTunes library to the iTunes Music folder. To adjust this setting or change the location of this folder, go to the Advanced tab in iTunes Preferences.
If that still doesn't work or you've already tried that with a new library, you may find more information by using another one of Apple's support resources:
http://www.apple.com/support/contact/
Cheers,
- Ari

Internet Radio is NOT missing after all, hooray!

OK, Internet Radio is NOT missing after all. Its placement just has been made so illogical that as long as you try to find it by logic you will fail.
This is what and where it used to be: an item "Radio" under "LIBRARY" in the side bar, its showing toggleable on-off in Preferences by checking/uncheking the corresponding checkbox. You click on "Radio" under "LIBRARY" and you see a list of internet radio stations in the browser frame.
Here is what and where it is now: a button "Internet" in a button bar over the browser frame when item "Music" is selected under "LIBRARY" in the side bar. You click on "Internet" and you see a list of internet radio stations in the browser frame just as in the happy olden days. The word "Radio" (as a button) now refers to a service where you can make up your own "stations" a la Pandora, I guess. At the same time nothing whatsoever has changed in Preferences, there is still an "Internet Radio" checkbox but unless you are looking at the buttons over the browser frame you will never know what it does. Not only that, there is no corresponding "Internet Radio" library item or button anywhere, there is "Radio" and an "Internet" button, and it just so happens that the checkbox will toggle the "Internet" button on-off.
The end result of all of this is that all items under "Show" in Preferences toggle items under "LIBRARY" in the side bar except the "Internet Radio" item which will toggle the "Internet" (i.e. internet radio) button in the button bar of "Music". This also means that the only button that can be toggled on/off in the button bar is the "Internet" button, all others are fixed.
Messing with it for messing's sake, trying to be fancy.

Hi Sarah, thanks for ur reply.
I did not use toad to kill session.
I use form application to kill session,
e.g. user id 1111 log in to the application in PC 1
at the same time, same user id 1111 log in to the application in PC 2
So when the user log in into PC 2, i kill the session in PC 1 (in form application).
So when i log out from PC 2, i close the applet, in the next hour, i need to log in again using PC 2 without close the IE.
So the IE is not responding.
Is there any way to refresh IE without re open again to connect to the application ?
Thanks,
Iwan

Also RAID 5 missing after reboot; RA Utilities non effective

I am having a nearly identical problem as listed in the "RAID 5 missing after reboot; RA Utilities non effective" thread, with one or two small differences.
We shut down our Xserve RAID normally on friday, started it back up on Monday to find that one of the arrays was no longer there. RAID 1 is still working perfectly, but RAID 2 now has all the drives listed as spare. Tried all the tools in RAID Admin, but nothing has worked. At the advice of Apple tech support i updated the firmware to 1.5, swapped out controllers and cables, and tried using the Recognize RAID command in utilities. Nothing has worked. Apple recomended bring the drives to Drive Savers to get the data recovered. Does anyone have any other ideas?
Oh, also this raid was reporting a failed drive on friday before it was shut off, when powered back on the drive now claims to be fine.

Guess I got lucky.... After a reboot of the Xserve RAID, RAID #2 mounted again. Did my backups, shut it back down, and updated firmware to 1.5 with no problems. All seems good now.
Still wondering what happened.
It appears that drive #8 failed, and after the rebuild with new replacement drive, it seems as though the controller needed to be restarted too. The odd thing is, before the restart, #2 was acting like it had three new drives and no array configured at all. After the reboot, there is the RAID 5 array, no rebuild or anything - ready to go.
So here is my question:
How often does everyone reboot their Xserve RAID? should it be done periodically? Every 3 months? Every month?
Or is this just a hiccup with the parity rebuild, and nothing else to worry about, or even a firmware issue for the controller(s) that 1.5 may resolve?

Audio Files Missing after sent from FCP

I'm sending a sequence to STP from FCP. There are 8 tracks of audio (4 stereo pairs). Tracks 1 & 2 have dialogue, 3,4,5 &6 have SFX and 7 & 8 have music. After sending a Multi-track project I am missing audio files on the dialogue track. The visual reference is there. The audio and video are linked in FCP but sections of dialogue are just not there.
I've repaired disc permissions, trashed preferences, ran Disk Warrior and reinstalled FCS. I'm on STP 3.0.1.
I searched the forum and was unable to find a similar situation. Any and all insight are greatly appreciated. Thank you in advance.

You have to assign tracks to a submix and then out to the master before you can hear them.
But some of the audio files are there and some of them aren't. There is no rhyme or reason for audio that appears and files that are missing. I can hear the dialogue that made it to STP from FCP, along with the SFX and the music. I've never assigned a submix to audio just to be able to hear it.
Are you on a laptop?
I've tried it on my 8 Core Mac Pro and my 2007 MBP. Same result on both. I have other sequences where everything is sent over completely. It's just this one. It is no different from any other sequence. It is all ProRes 422 and .AIFF 48khz/16 Bit
Thanks for your input.

TS1424 Bought and Album and one song is missing after itunes froze cant see how to dowload the missing song as it says Purchased

Bought and Album and one song is missing after itunes froze cant see how to dowload the missing song as it says Purchased
Pls Help Best and Kind Regards

Depending upon what country that you are in (music can't be re-downloaded in all countries) then see if it shows under the Purchased link under Quicklinks on the right-hand side of the iTunes store home page on your computer's iTunee. If it shows there but doesn't have the clpud symbol against it for redownloading then is that track listed in the Music part of your library i.e. where you would click on it to play it ? If it is then delete it from there and it should then get the cloud symbol against it in Purchased.
If you aren't in a country where you can re-download music or if it re-downloads in the same state then try the 'report a problem' page to contact iTunes Support : http://reportaproblem.apple.com . iTunes Support should reply within, I think, about 24 hours.
If the 'report a problem' link doesn't work then you can try contacting iTunes support via this page : http://www.apple.com/support/itunes/contact/- click on Contact iTunes Store Support on the right-hand side of the page, then Purchases, Billing & Redemption

Nokia music crashes after 1 track download on CWM

Nokia Music crashes (NokiaMusic.exe has encountered a problem and needs to close) everytime you download 1 track from comes with music. It downloads the track and appears to add it to the right directory if you look using file explorer, but it always comes up with the "encountered a problem" popup. Complete re-install on v1.2 on XP sp3. With deleting all "document and settings " related Nokia directories prior to re-installation. Also, crashes every time you do menu/file/import and choose a directory and go. I've re-installed it numerous times and dont know what else to do. Any help much appreciated.

Hi there,
just to share that i had this problem of nokia music crashing after every download and going on to the next.. this happened after i changed the music collection to a remote drive off my lappy( No space). Anyway that idiot pop up appeared and i tot i was doomed.. so i uninstalled the nokia music from the control panel.. then unhide all hidden files and ran the search for files in windows explorer for all file "Nokia"... deleted them. I went to C:\Documents and Settings\Whatever\Local Settings\Application Data\ and deleted the nokia folder. then go to C:\Program Files\ and delete "Nokia" folder. after i cleared all the damn nokia stuff, i restarted the PC then reinstalled nokia music.. suprisingly it worked the library had to rebuild itself and the login was still working fine. now it works again!! yahoo.
Message Edited by toufooking on 21-Apr-2009 09:23 AM

I am having problems with my music collection, after burning all of my music to the computer I organized it into folders and placed it in the iTunes Folder. Starting on a new computer now. I can get my music from old computer?

I am having problems with my music collection, after burning all of my music to the computer I organized it into folders and placed it in the iTunes Folder. As of now i realize this was a mistake. Starting on a new computer now. I cant get my music to transfer from the itunes folder on the old computer? I keep getting error "Can't Read from the source file or disk." Whenever I got to folder properties its always checked read only. But when i play the song it works just fine. Im sure this is just because I added music into itunes folder but is there anyway to fix it?

WMA files are 'window media audio' files, which is a Microsoft format. If you want to add them to your iTunes library on your Mac then you will need to convert them into a compatible format first. If you still have your windows machine then iTunes for Windows can convert them from WMA to MP3 format : https://discussions.apple.com/message/24158701#24158701
Or try a search for, for example, 'convert wma to mp3' to find programs to convert them.

Windows 2008 R2, Network drops even after rebuild, Please help to diagnose

Hi there,
I've had an issue for a while now and I have been working through it and I'm getting lost and starting to go around in circles.
I have just rebuild up a Server 2008 R2 x64
Configuration is
Server: HP Prolient ML330 G6 Quad core xeon 24GB ram (between 2-3 Years Old)
HDD: Raid1 500GB
ip: 192.168.1.253
su: 255,255,255.0
gw: 192.168.1.1
dns 1: 192.168.1.253 (Was 127.0.0.1) please read on!!!
dns 2: empty
Roles and SW: AD DC, DNS, DHCP and Exchange Server (in 1 box)
My original issue was network dropping out every few weeks, progressively got worse to being daily. Restarts would fix it, tho would disconnect after hours or a day or 2.
Issues would be that during a network outage, I cannot connect workstations to domain, no network shares. Internet was dead, and a heap of Event ID errors
Server rebuild went well, It's a 2008 R2 setup and it runs basically everything in 1 server 2008 R2.. I know its not ideal but it's what they had setup previously.
So After rebuild I was using it for hours and hours and configuring, adding, cleaning, updating. All was good.
I was restoring of some emails and system was loaded medium to high for a while.
I went home thinking all was good and might connect via VPN and do some work and monitor it all, The vpn disconnected after a few minutes.
I called their office and asked is all normal?
They said network shares and emails have stopped. I confirmed this as the network would do the same thing it was doing before the rebuild.
So I restarted the server and Internet/Network drops within minutes of being restarted. tried many things to solve this..
hours later I installed known hotfixes, updated drivers, and tried so many other things to try and solve this...
I had heaps of Event ID errors before the rebuild, and trying to ping anyone was resulting in General Errors, and cannot ping basically
After the rebuild it has same sorts of event id errors. I had same general errors when trying to ping.
In the end at 2am 2 weeks ago, I finally got it running smoother..
I did 2 things which have made the network last longer then few minutes...
1. Disabled the Network Port 1 and Enabled the 2nd Port. (Both On board FYI)
2. Changed DNS in the TCPIPv4 from 127.0.0.1 to (192.168.1.253 (Servers IP))
Since this change, I no longer get event ID errors.
When network stops working the network icon stays normal.
And network is lasting days rather then hours.
Things I've spoken to others about,
- 127.0.0.1 and changing to 192.168.1.253 these 2 are basically the same both being loopback to server. They both point to itself..
- The fact the problems reappeared after a rebuild points towards hardware
- I think the summer heat might have cooked the NIC :p as same day the server crapped itself my clients home wifi setup also died. The range extender died! weird coincidence
- So I am seriously thinking it cannot be the DNS IP Configuration setting, I know that running all roles on a single server is hard for a server. But I find it hard to believe it was the DNS which caused this error
I have continued to work on this issue through the weeks.,
The following information is newest
28th March,
After 2 days of sweet operation.. IE Just after the switch to 2nd port.
The server's network went down..,
I can ping only 127.0.0.1 or 192.168.1.253 ok
but ping gateway or workstations times out.
Netstat shows heaps of ipv6 and very few ipv4 addresses
I restarted the server, applying computer settings sat there for a while..
dunno if it was coincidence or not but unplugging the Gateway and replugging it made the CTRL-ALT-DEL come up right away.
after boot everything has been ok for 14 hours now...
Now the Network Ports (2 of them are on the server, most likely sharing controller)
Please take a look at my ping/netstat and please make any comments.
----- Ping.txt -----
Microsoft Windows [Version 6.1.7601]
Copyright © 2009 Microsoft Corporation. All rights reserved.
C:\Users\Administrator>ping 192.168.1.1
Pinging 192.168.1.1 with 32 bytes of data:
Request timed out.
Request timed out.
Request timed out.
Request timed out.
Ping statistics for 192.168.1.1:
Packets: Sent = 4, Received = 0, Lost = 4 (100% loss),
C:\Users\Administrator>ping 192.168.1.253
Pinging 192.168.1.253 with 32 bytes of data:
Reply from 192.168.1.253: bytes=32 time<1ms TTL=128
Reply from 192.168.1.253: bytes=32 time<1ms TTL=128
Reply from 192.168.1.253: bytes=32 time<1ms TTL=128
Reply from 192.168.1.253: bytes=32 time<1ms TTL=128
Ping statistics for 192.168.1.253:
Packets: Sent = 4, Received = 4, Lost = 0 (0% loss),
Approximate round trip times in milli-seconds:
Minimum = 0ms, Maximum = 0ms, Average = 0ms
C:\Users\Administrator>ping 127.0.0.1
Pinging 127.0.0.1 with 32 bytes of data:
Reply from 127.0.0.1: bytes=32 time<1ms TTL=128
Reply from 127.0.0.1: bytes=32 time<1ms TTL=128
Reply from 127.0.0.1: bytes=32 time<1ms TTL=128
Reply from 127.0.0.1: bytes=32 time<1ms TTL=128
Ping statistics for 127.0.0.1:
Packets: Sent = 4, Received = 4, Lost = 0 (0% loss),
Approximate round trip times in milli-seconds:
Minimum = 0ms, Maximum = 0ms, Average = 0ms
C:\Users\Administrator>ping google.com
Ping request could not find host google.com. Please check the name and try again
C:\Users\Administrator>netstat
Active Connections
Proto Local Address Foreign Address State
TCP 192.168.1.125:6008 192.168.1.118:49683 ESTABLISHED
TCP 192.168.1.253:6008 192.168.1.120:55103 ESTABLISHED
TCP 192.168.1.253:6008 192.168.1.121:49703 ESTABLISHED
TCP 192.168.1.253:6674 WORK-SERVER:19928 TIME_WAIT
TCP 192.168.1.253:19928 WORK-SERVER:6674 TIME_WAIT
TCP [::1]:389 WORK-SERVER:6012 ESTABLISHED
TCP [::1]:389 WORK-SERVER:6013 ESTABLISHED
TCP [::1]:389 WORK-SERVER:36939 ESTABLISHED
TCP [::1]:6012 WORK-SERVER:ldap ESTABLISHED
TCP [::1]:6013 WORK-SERVER:ldap ESTABLISHED
TCP [::1]:36939 WORK-SERVER:ldap ESTABLISHED
TCP [fe80::9142:b19d:a6d0:d31d%14]:135 WORK-SERVER:19932 ESTABLISHED
TCP [fe80::9142:b19d:a6d0:d31d%14]:135 WORK-SERVER:32574 ESTABLISHED
TCP [fe80::9142:b19d:a6d0:d31d%14]:135 WORK-SERVER:35314 ESTABLISHED
TCP [fe80::9142:b19d:a6d0:d31d%14]:135 WORK-SERVER:35353 ESTABLISHED
TCP [fe80::9142:b19d:a6d0:d31d%14]:135 WORK-SERVER:56321 ESTABLISHED
TCP [fe80::9142:b19d:a6d0:d31d%14]:135 WORK-SERVER:64583 ESTABLISHED
TCP [fe80::9142:b19d:a6d0:d31d%14]:389 WORK-SERVER:6684 ESTABLISHED
TCP [fe80::9142:b19d:a6d0:d31d%14]:389 WORK-SERVER:6685 ESTABLISHED
TCP [fe80::9142:b19d:a6d0:d31d%14]:389 WORK-SERVER:6686 ESTABLISHED
TCP [fe80::9142:b19d:a6d0:d31d%14]:389 WORK-SERVER:6687 ESTABLISHED
TCP [fe80::9142:b19d:a6d0:d31d%14]:389 WORK-SERVER:6689 ESTABLISHED
TCP [fe80::9142:b19d:a6d0:d31d%14]:389 WORK-SERVER:6692 ESTABLISHED
TCP [fe80::9142:b19d:a6d0:d31d%14]:389 WORK-SERVER:6694 ESTABLISHED
TCP [fe80::9142:b19d:a6d0:d31d%14]:389 WORK-SERVER:6712 ESTABLISHED
TCP [fe80::9142:b19d:a6d0:d31d%14]:389 WORK-SERVER:6765 ESTABLISHED
TCP [fe80::9142:b19d:a6d0:d31d%14]:389 WORK-SERVER:17256 ESTABLISHED
TCP [fe80::9142:b19d:a6d0:d31d%14]:389 WORK-SERVER:17327 ESTABLISHED
TCP [fe80::9142:b19d:a6d0:d31d%14]:389 WORK-SERVER:19074 ESTABLISHED
TCP [fe80::9142:b19d:a6d0:d31d%14]:389 WORK-SERVER:19075 ESTABLISHED
TCP [fe80::9142:b19d:a6d0:d31d%14]:389 WORK-SERVER:19077 ESTABLISHED
TCP [fe80::9142:b19d:a6d0:d31d%14]:389 WORK-SERVER:19896 ESTABLISHED
TCP [fe80::9142:b19d:a6d0:d31d%14]:389 WORK-SERVER:19902 ESTABLISHED
TCP [fe80::9142:b19d:a6d0:d31d%14]:389 WORK-SERVER:24754 ESTABLISHED
TCP [fe80::9142:b19d:a6d0:d31d%14]:389 WORK-SERVER:36936 ESTABLISHED
TCP [fe80::9142:b19d:a6d0:d31d%14]:389 WORK-SERVER:36944 ESTABLISHED
TCP [fe80::9142:b19d:a6d0:d31d%14]:389 WORK-SERVER:36946 ESTABLISHED
TCP [fe80::9142:b19d:a6d0:d31d%14]:389 WORK-SERVER:41165 ESTABLISHED
TCP [fe80::9142:b19d:a6d0:d31d%14]:389 WORK-SERVER:56317 ESTABLISHED
TCP [fe80::9142:b19d:a6d0:d31d%14]:389 WORK-SERVER:56319 ESTABLISHED
TCP [fe80::9142:b19d:a6d0:d31d%14]:389 WORK-SERVER:59239 ESTABLISHED
TCP [fe80::9142:b19d:a6d0:d31d%14]:389 WORK-SERVER:59243 ESTABLISHED
TCP [fe80::9142:b19d:a6d0:d31d%14]:389 WORK-SERVER:59244 ESTABLISHED
TCP [fe80::9142:b19d:a6d0:d31d%14]:389 WORK-SERVER:59245 ESTABLISHED
TCP [fe80::9142:b19d:a6d0:d31d%14]:389 WORK-SERVER:59258 ESTABLISHED
TCP [fe80::9142:b19d:a6d0:d31d%14]:389 WORK-SERVER:59262 ESTABLISHED
TCP [fe80::9142:b19d:a6d0:d31d%14]:389 WORK-SERVER:59263 ESTABLISHED
TCP [fe80::9142:b19d:a6d0:d31d%14]:389 WORK-SERVER:59327
A HEAP MORE IPv6 but msg too long
I have noticed currently using the Cisco Gigabit switch the network will last 24-48 hours.
3th April
I have tested a 10/100 16port netgear and the network lasted for 5+ Days.
8th April
I noticed network and sharing centre icon has no exclaimation mark looked normal.. so on server I tried to open google website.
Nothing....
I pinged loopback. was ok
Ping the modem and not ok.
So I restarted the adsl modem. Within a minute server resumed internet..
I am unsure if the router caused this dropout. And my thinking spans now using a maximum speed of 100mbps it has taken 5 days to drop. WHY is this?
Either the modem is causing this. Or its the server nic running at only 100mbps
Does it make any sence?
Can a nic on server cause a drop only to restart the gateway to make it startup again.
From my post do you think the port on the gateway is flaky? As you said maybe too much for it to handle.
The modem has 4 lan ports.
Would it make sence to connect more than 1 lan cable from switch to modem?
Thankyou
Cheers

Make sure you have the latest ROM bios and proliant support pack.
http://h20566.www2.hp.com/portal/site/hpsc/template.PAGE/public/psi/swdHome/?sp4ts.oid=3948599&spf_p.tpst=swdMain&spf_p.prp_swdMain=wsrp-navigationalState%3DswEnvOID%253D4064%257CswLang%253D%257Caction%253DlistDriver&javax.portlet.begCacheTok=com.vignette.cachetoken&javax.portlet.endCacheTok=com.vignette.cachetoken
Install the rom bios, then easiest to boot the HP smartstart to prepare for operating system deployment, then install the complete PSP next.
Regards, Dave Patrick ....
Microsoft Certified Professional
Microsoft MVP [Windows]
Disclaimer: This posting is provided "AS IS" with no warranties or guarantees , and confers no rights.

Music missing after "Rebuild"

Similar Messages

Maybe you are looking for