Music of imported pps files doesn't sound on Keynote

I got Keynote on my Ipad, and when I import pps files, its music doesn't sound. It's very strange because the same file, I open it in powerpoint in my mac and it works fine, the musics perfect. So what's the problem? Can i do something on my mac to get this pps file to work with music on my iPad keynote?
thank you

How could I NOT import them? Appointments I do "by hand" show up immediately on the other devices. The imported appointments show up after modification.

Similar Messages

File doesn't sound the same when I return to it

I worked hard on a mix of a tune back in December. I have a bounce from that session that I listen to as a reference, but when I open the Logic File, some regions don't play, automation is off and all sorts of things are not the same. It's like the whole file has reverted to some old version with an old mix. The date of the last save matches the date of the bounce, so I cannot figure out why the file doesn't play down the way that I left it, even though I left it months ago.
Any thoughts?
Much appreciated...

Hi Eriksimon,
Firstly, thanks for your message.
What I meant by "hi pass mid pass shrinking in" is EXACTLY what you menat, I got a heavy bass and muffed high and mid content. Apologised for my poor English.
I haven't checked the setting of the playback device yet but instead I tested it with some professional produced tracks. I know the sound tends to vary a little bit when playing from computer and CD player such as the CDJ 900 that I am using. The differences were not as significant as my own track. They tend to get a rather good balance. My track is well balanced and mixed (I guess) in Logic but it turns out completely different when using the CD player.
I bounced my work to MP3 with highest BIte Rate.

Premiere CS5 import.MTS file with no sound.

when I import .MTS file into Premiere CS5, the sound can not be import~
how can I put the video sound into premiere

So ..is yours the 'Trial Version'?
Read Trial Limitations
https://www.adobe.com/cfusion/tdrc/index.cfm?product=premiere_pro

Word Wrap -- Imported Excel File Doesn't

I have a number of Excel files that I'm trying to work with in Numbers.
In a number of cases the text I enter in a cell is longer than the width of the column. In Excel I indicated that this was text and that the program should wrap. The data transferred over showed the text as I need -- spilling to a second line when needed. But when I enter new text in the same sheet and same column the text is truncated to the width of the column. I have the "Wrap" button clicked.
Any ideas?
Thanks
In a previous post one of our Discussions colleagues was kind enough to suggest that I should read the User's Guide. Let me say that before I post here I do try the Help function and the User's Guide. Often it seems I lack the appropriate vocabulary / can't figure out how to ask / etc. I only post here when I can't figure it out.
Also I am new to Numbers and am making an effort to switch from Excel. I wonder / fear that the files imported from Excel are not as "clean" as we might expect and so add to my challenges.
Finally I have a few questions but for the sake of matching a specific solution to a specific issue I will post a number of questions rather than ask all my stuff in the same post.

jayessemm wrote:
I have a number of Excel files that I'm trying to work with in Numbers.
In a number of cases the text I enter in a cell is longer than the width of the column. In Excel I indicated that this was text and that the program should wrap. The data transferred over showed the text as I need -- spilling to a second line when needed. But when I enter new text in the same sheet and same column the text is truncated to the width of the column. I have the "Wrap" button clicked.
Any ideas?
Sounds like Numbers (or the user) is setting only the individual cells to wrap. To apply that setting to a whole column, click on any cell in the table to make the row and column reference tabs appear, then click the reference tab for the desired column to select the whole column. Now click the Wrap checkbox to apply or remove the Wrap setting to/from all cells in the column.
In a previous post one of our Discussions colleagues was kind enough to suggest that I should read the User's Guide. Let me say that before I post here I do try the Help function and the User's Guide. Often it seems I lack the appropriate vocabulary / can't figure out how to ask / etc. I only post here when I can't figure it out.
Understood. The Preface and Chapter 1 of the Numbers '09 User Guide provide a lot of the vocabulary specific to Numbers. You'll also learn a lot of that vocabulary by scanning the menus.
Also I am new to Numbers and am making an effort to switch from Excel. I wonder / fear that the files imported from Excel are not as "clean" as we might expect and so add to my challenges.
That's always a possibility, of course. Also, you'll find that Numbers does not support all of the functions and features found in MS Excel (although for many unsupported features, there are other ways of accomplishing the same thing, or something similar, in Numbers).
Regards,
Barry

My imported AVI file doesn't play audio in Premiere Pro CS5 nor Encore CS5

Hi there,
I've been trying to find a solution for my "audio" problem for a few days now, but no luck...
First of all I'd like to mention that I work on a Mac.
I have an AVI file that plays perfectly fine in Quicktime (audio and video).
However, when I import it in Encore or Premiere, it shows the video but there's no audio.
I understand this probably has something to do with codecs? But I really have no clue what I can do about it.
I was working in Encore at first, cause I don't really need any editing, just a dvd I'd like to burn. Since the audio didn't work there I've tried importing in Premiere. Same problem of course. Then I tried to seperate the audio and video and transfered it into Soundbooth. Didn't change anything.
Another problem that occurred in Encore was some errors with gaps. I have about 10 AVI files that I put on the same timeline. Any advice on what I can do about that?
I'm kinda new in all of these things, so any help would be much appreciated.
Thanks a lot!

Hi again,
I've downloaded mediainspector and got the following results:
I also checked the timeline after importing a video and there is indeed a red line over the timeline in Premiere, not in Encore:
Screenshot timeline Encore:
Screenshot timeline Premiere:
My project settings in Encore: I took the standard for a dvd Pal widescreen:
And in Premiere I've tried the 4 different standard settings for DV PAL. All the same result with the red line.
I've read the articles about the codecs, but I really could use some help what I can do next. Should I convert it to an MPEG2 for dvd file for example? Which converter (free?) is good for Mac?
Or is there something else I need to do?
I understand how the programs work but I really don't know so much technical stuff about sound and video.
Oh, and just for your information: I imported an MP3 file also in the project, to play at the main menu, and that one is playing just fine, no problems there.
Thanks again for all the help! I really appreciate it.

Importing vob file doesnt have sound

i have the mpeg 2 converter and imported one vob file without a problem but imported a second and it went into quicktime fine but had no sound. why is that

I've the same problem with my Sony N1-digital camera, quicktime can't convert it for iMovie (no sound).As QT Kirk indicated above, QT and associated QT-based applications (like iMovie) do not preserve audio during conversion. Basically, QT is based on frame-to-frame temporally synchronized technology while your MPEG-2 VX files are based on spatial sychronization by interspersing blocks of audio data with blocks video data in a single date stream. If you have the QT MPEG-2 component installed ($19.99 component required to view MPEG-2 video data), then use MPEG Streamclip (free) as recommended by Kirk. This file can convert your file to either an MPEG-2/MP2 file which is compatible with QT (with MPEG-2 component installed) or convert it to DV a video/audio file which is compatible with iMovie for editing. If no editing is required other utilities like iSquint or FFmpegX (both free) can also convert your files to QT compatible formats.
I made a mistake to buy quicktime professional.You should actually read the ads and specifications of a product before purchase. QT Pro merely unlocks editing, conversion, and savings options not available to the basic QT Player. It does not add additional codecs like WMV, DivX, MPEG-2, etc. which are available as add-on components from various vendors.

I find that imported ppt files often display incorrectly in Keynote.

Graphs that we originally metafiles, for instance, don't display axis numbers and labels. Does anyone know how to fix this?

Pierre,
A suggestion that you could try is to see if printing to a pdf file from Preview creates a file that works in Keynote with the correct dimensions. (bypassing Previews export and save) I do know that if you crop a pdf in Preview to show only a small bit of text on the file it will save the entire file but only show the cropped portion of it when used in other programs. It is 'non destructive' so the entire document is saved, but the amount you see onscreen has changed.
I believe this is what is happening. Preview is not changing the rotated file, just the instructions to rotate it when displayed.
By printing the document to a preview window and saving as a pdf from there, you should be creating a brand ew document.
Please try that, and if it doesn't work and if these are not of sensetive material, would I be able to have a look at one of your pdf files that you are working with?
My email is [email protected]

Import photo file stops my music while plying

While playing music, the import photo file pops up and stops the music. I don't have photos, never imported any, don't even know if I can ! How can I stop it or delete it ? It is making my life miserable ! Please help me !!!

what computer, OS and ipod are you using?

No sound in imported PowerPoint files

Although I have no difficulty in playing any .pps file sent to me (the pictures are fine), however no music or other SFX plays. I followed the suggestion to change .pps to .ppt, but it makes no difference: everything still plays in beautiful dumb show. I'd be grateful for any suggestions, thank you.

He doesn't know. He just passed it on to me. Feel free to send me a .pps or .ppt with sound, if you wish. I'm [email protected] I should add that I use Keynote to handle PowerPoint files. Also, the file has a .pps extension, which I converted to .ppt after the initial failure, also to no avail. Lastly, I alrready use flip4mac with no problems I can recall. Apologies for the piecemeal description of my situation.

Problems capturing the sound layer when importing m2ts files

Hi all, I'm new to the whole video editing side of things and so would appreciate some help.
I've just acquired a Canon HF200 HD camcorder, and a Sony Vaio notebook which came with Premiere Elements 7.0 pre-installed.
For the last month I've been shooting footage, and just getting down to trying to edit everything and put a DVD together.
The problem I have at the moment (and I've just started using the program, so everything is new to me) is that while I seem to be able to import the m2ts file format in which my camera records, only the video is imported into Premiere - not the audio (it reads the file ok, and no errors appear, but when I go to review the footage there is video but no sound).
I can play all my videos in Windows Media Player just fine, with both video and audio. So it seems my machine is able to read the files correctly in this program. However, the audio seems to drop out when I import the file into Premiere. The program was pre-installed in my machine, and when I go in to have a look at the audio settings, there doesn't seem to be an ability to change the settings to something different.
So far I've spent a long time googling and trying to find a solution, but with no joy just yet.
Appreciate any assistance the anyone can offer. Is there just a simple setting that I need to change? Or do I need to somehow convert the files into another format before Elements 7.0 can read them?
Thanks.
Jeff

the machine I have seems to comply with the specs required by PE7 (and given that it came with PE7 pre-installed that should be the case).
There are two things to consider:
1.) editing most footage, especially SD material
2.) editing AVCHD, currently the most demanding of all common video formats to edit. This is what you have.
Now, when you launch PrE, you get a splash screen. There you can Open New (create a new Project), Open an existing Project that has been opened recently, or Open a Project by navigating to it. One can also Exit.
In your case, you will go to New and when that dialog box opens, choose the Preset for AVCHD w/ DD 5.1 SS Audio.
Also note, that when in the Edit Mode, there are two View Modes (accessed via two icons to the left of the lower Panel), Timeline View Mode and Sceneline View Mode. For DD 5.1 SS Audio Clips, you will find Timeline View Mode to be the best. Now, you can switch back and forth, but Timeline View Mode will give you infinite control. It is the view that most editing programs use, and that most editors use.
Good luck,
Hunt
PS - I strongly recommend Steve Grisetti's book, The Muvipix.com Guide to Adobe Premiere Elements 7.

No sound when playing .pps files

I occasionally receive .pps or .ppt files from my mother but usually can't hear any sound when playing these slide shows. Most recently, I took the same inaudible presentation she sent me, renamed the file and sent it back to her and the music accompanying the renamed slide show played fine for her. Any idea what's going on?? My mother does not create these files but just forwards them along to me. She uses a Windows XP machine and I use a Mac if that makes any difference.
dgm
power mac g4 dual 1.42 Mac OS X (10.4.9)

I'm having the same problem. Evidently, the Mac does not include
whatever application plays the music that accompanies a .pps file.
I visited my local Apple store, but nobody was able to help.
Very disappointing and frustrating.

Importing HDV files (.m2t) no audio in timeline (or sound gaps in audio file) ONLY IN CS6 !

After importing HDV files, wait for conforming, and drop the files to sequence, on some files there is no audio at all or partial audio.
All files played OK in any mediaplayer.
I have no such problems in CS5 or 5.5 using the same files in the same project and sequence type. HDV 1080i/25
I reinstall PR CS6 and I delete all ".cfa" and ".pek" files, but no success.

All right so what I just discover so far in order to resolve this non sense bug thing, I've exported the faulted sequence in EDL, track by track.
On the original sequence, I had a Prores 422 video clip name "Clip 497" that was manually sync with an audio file call "Audio 10".
At another timecode in the original timeline, I had a h264 clip name "MVI_0050" that was synced with an audio file call "Tascam_0455".
I said that when I select only an audio file in the timeline and I make reveal in the project, it links me to the correct audio file in the bin but when I make match frame or reveal in the finder, it links the audio to a video file. The
Well the EDL just confirmed that, in the timeline created by the EDL, I have to relink manually all the files (wich is a pain in...) and my mysterious audio file "Audio 10" appears with the name "MVI_0050", I can still link it to the original "Audio 10" but I don't understand HOW an audio get to be linked to a video file......
The audio file coming from the Tascam still have their original names in the timeline.
Very weird and not very cool.
Oh and guess what, after closing Premiere and re open it, my sequence coming from the EDL where I spent 1 hours to manually relink the media....does not have sound anymore.......................

Importing flash files (with sound!) can it be done?

Hi!
I sucessfully importing a flash file but im not sure if the sound has imported with it, does anyone know if I can import a flash file with sounds or do I have to import the sound seperatly?
Helen

Helen,
After Effects can import .SWF files but unfortunately it does not recognize the audio in a .SWF file.
If it helps, AE can import .FLV files and it WILL recognize the audio in them.
Relevant Help page:
"Supported import formats"
-Troy

My imported swf files have lost their streaming sound. What can I do?

I am trying to import a swf I made that contains streaming sound. When I place it on the time line and press cntr enter my animation plays but with no audio. I see the symbols from the swf and the swf inside my library. When I open the swf file inside my project it is broken down frame by frame with no audio. I can add audio back into my movie clip so I know that movie clips can support streaming audio. But I would rather not have to do this.
I'm very new to flash so I am hoping there is something big that I am missing.
In addition to my previous question: I need to embed a lot of objects over and over in this project I am working on. Each object will have controls for play back of itself. Is there some reason I cannot do this?
Thank you for any advice you may have.

Thank you for your reply
Ok. I will need to maintain a libary of movie clips that contain streaming audio and simple scripts. Does anyone know of a good tutorial for importing a file at runtime? I've seen something called shared libary properties and it has a field for a url. I put a swf file on my web site and took it's url and put it into this field but nothing shows in my library. What else do I need to do?

Why can't I open and retrieve my files from iPhoto and my address book after importing the files from my Power mac G5 to my new Mac Pro? I get a warning that says the new OS on my Pro doesn't open files from a Power Mac. Any idea how I can fix this?

Why can't I open and retrieve my files from iPhoto and my Address Book after importing the files from my Power Mac G5 to my new Mac Pro? I get a warning that says the new OS on my Pro doesn't open files from a Power Mac. Any idea how I can fix this?

For your addressbook, export the files to vCard on the PowerMac, then bring them over to your Mac Pro. For your iPhoto, copy the Users -> yourname -> Pictures folder to your Desktop on the Mac Pro, and open iPhoto on the Mac Pro holding the command and option keys. Select the library file from that Pictures folder and open it. It should import all the pictures into iPhoto as part of the rebuild process. Other PowerPC to Intel migration issues are covered here: https://discussions.apple.com/docs/DOC-2295

Music of imported pps files doesn't sound on Keynote

Similar Messages

Maybe you are looking for