Music Play with Queue Built Into Player

With my Sonos player I can add music while a song is playing by simply touching the song I want, It then ask if I want to add it to my queue. The advantage is that I don't accidentally stop the song I was playing and the one I'm trying to add to the queue starts playing.
I know Sonos only works with wifi, but is there any available player for an iPad that would allow me to add songs while another is still play that has a queue feature. I know most have a playlist feature, but that's not what I am looking for.
I have an iPad Air Operating System is 7.0.4

Stefen
My Inbound file was coming correctly like this :
record
- detail
- weight
- weight
record
- detail
- weight
but when mapping to the target in same style it was going this way
- detail
- detail
- weight
- weight
- weight
so what i did...i asked the portal people to add an identifier to the details and weights so that i can read it and write a UD to finally map it correctly:
- 1detail
- 2detail
- 1weight
- 1weight
- 2weight
- 2weight
it is working properly now....thanks to you all.....have given the points

Similar Messages

When listening to an audio book it freezes after about 10 minutes. I have done a soft reset, I have deleted the audio book and re- installed. My music plays with no problem.

Using my ipod nano -when listening to an audio book it freezes after about 10 minutes. I have done a soft reset, I have deleted the audio book and re- installed. My music plays with no problem.

Please read this whole message before doing anything.
This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
The purpose of the test is to determine whether the problem is caused by third-party software that loads automatically at startup or login, by a peripheral device, by a font conflict, or by corruption of the file system or of certain system caches.
Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards, if applicable. Start up in safe mode and log in to the account with the problem. You must hold down the shift key twice: once when you turn on the computer, and again when you log in.
Note: If FileVault is enabled, or if a firmware password is set, or if the startup volume is a Fusion Drive or a software RAID, you can’t do this. Ask for further instructions.
Safe mode is much slower to start up and run than normal, with limited graphics performance, and some things won’t work at all, including sound output and Wi-Fi on certain models. The next normal startup may also be somewhat slow.
The login screen appears even if you usually login automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
Test while in safe mode. Same problem?
After testing, restart as usual (not in safe mode) and verify that you still have the problem. Post the results of the test.

Hi, I have downloaded some avi files and mov files. i am not getting audio while playing the movie. i tried to play with iTunes, QT, DivX player. but I am getting audio in mp4 files. can u help me to fix this

Hi, I have downloaded some avi files and mov files. i am not getting audio while playing the movie. i tried to play with iTunes, QT, DivX player. but I am getting audio in mp4 files. can u help me to fix this

First, back up all data and then uninstall "DivX" according to the developer's instructions.
Then try this:
VideoLAN - Download official VLC media player for Mac OS X

Music plays with snarks on Win Vista 64 bit

Hello,
I have Iphone 4 and Win Vista 64 bit. The problem is when I copy any music to my device from Itunes it starts playing not from the start but approximately from ten second. After some time it comes to the start and than track plays with crashes, like on an old vynil record. I`ve thought it`s something with my Iphone but tried to copy music from Itunes on Win 7 32 bit and it went off well. Is it a bug with Itunes64 or maybe I`ve missed some settings?
Help me, please

Marty,
As a matter of fact, yes, I just the other day installed PSE2 on my new
Vista 64 bit machine and it installed without any complaints and now works
like a charm. I had seen several posts where folks reported assorted
problems doing so, but none here. It may be a matter of memory? I have 6
GB and a quad core processor.
Juergen

Starting in Firefox 26, MP3 content on Windows XP will open in the browser with the built-in player. The user should be better informed.

It was only after some hours of searching that I found the solution, on this page [ http://kb.mozillazine.org/File_types_and_download_actions ] which indicates the action to correct the problem (change the value of media.directshow.enabled). This involves using about:config.
Frankly I have better things to do with my time than getting Firefox to continue behaving as before. Lots of people download mp3 podcasts, this new behaviour is not helpful!!
I think (1) that offering the built-in player as the default is not good (even if you're proud of it), you should offer it as an option in the Tools>Options>Applications list.
I am taking the time to write this because I think FFX is a good product, but such changes without warning are likely to alienate faithful users, myself included.
Best wishes

Hi the-edmeister and thanks for your response.
Yes it's in the release notes, but these are not necessarily very intelligible to average users, and anyway, all it says is "Support for MP3 decoding on Windows XP, completing MP3 support across Windows OS versions". What's that supposed to mean? Well, I can deduce what it means but many wouldn't. And it doesn't help in turning the thing off. There's a fancy purple "Changed" button but no link to details, that I saw.
My point is that changes like this can wreak havoc in the daily life of your average user, and I would suggest they should be introduced with more subtlety.
Such as, making "media.directshow.enabled" accessible in the regular settings dialogue, maybe under some such heading as "Firefox built-in player".
I spent hours trying to work out which damned third-party software had pre-empted audio handling in Firefox. The natural place to look in such a situation is Tools>Options>Applications, or maybe Content. If I'd seen "Firefox built-in player" with a check next to it I'd have known what to do.
So this is just feedback, trying to point out that having "Applications" handling options that don't have any effect, is not going to make users better disposed to their favourite navigator.
Best

Stop theme music playing with loaded I-tune music

Load my photo's and video and along with the theme and now I want to get rid of the music that is playing with the theme and play only the music I loaded, but the theme music is also playing in the background at a lower pitch.

Does the sound only come on the instant you press the "increase volume" key? (In other words, does it seem like the default "volume up/down" click noise has been replaced by another piece of sound?). To verify, in the Finder's Go menu, locate "Go to Folder", and when prompted, paste in:
cd /System/Library/LoginPlugins/BezelServices.loginPlugin/Contents/Resources
When the folder opens, scroll to the bottom and look for "volume.aiff". Double-clicking will open it in iTunes and you'll be able to hear if it's the correct "click" sound or something else.
Or, is the sound always there and you just notice it more when you turn the volume up? - In that case, check your Dashboard and make sure there isn't a widget there playing music.
Matt

Query related message mapping: Play with queue.

Hi
i have a text file which i converting using File Content Conversion of file sender adapter. My file was very nested so i couldn't convert it the way i wanted i.e.
<Header></Header>
<Detail>
<Weights></Weights>
</Detail>
<Trailer></Trailer>
So now I m left with this kind of source xml:
<ns: MT_REQ>
<header>
</header>
<Detail>
</Detail>
<Weight>
</Weight>
<Weight>
</Weight>
<Detail>
</Detail>
<Weight>
</Weight>
<Weight>
</Weight>
<trailer>
</trailer>
And i want to map it to the same message type <ns: MT_REQ> but due to queuing of data it gives the following result:
<ns: MT_REQ>
<header>
<Identifier>H</Identifier>
</header>
<Detail>
<Identifier>D</Identifier>
Identifier>
</Detail>
<Detail>
<Identifier>D</Identifier>
</Detail>
<Weight>
<Identifier>W</Identifier>
</Weight>
<Weight>
<Identifier>W</Identifier>
</Weight>
<Weight>
<Identifier>W</Identifier>
</Weight>
<Weight>
<Identifier>W</Identifier>
</Weight>
<trailer>
<Identifier>T</Identifier>
</trailer>
i.e. all detail together then weights and header trailer on top and bottom. Now the problem is there is no relation between the weights and detail except that in the monitoring it comes like
1. First detail tag opens and closes with its data
2 then weights which are the heirarchy detail 1 open and closes
3 then second detail opens and closes and then weights of second detail comes under it before any third detail tag opens
So i was wondering if with the help of functions provided in the message mapping it will generate exact mirror image of my source <ns: MT_REQ> into the target <ns: MT_REQ1> which is the exact replica of the former.
I tried it with FormatByExample but dd not work. Is there any Userdefined function or something foe my problem.
Please help !!
Naina

Stefen
My Inbound file was coming correctly like this :
record
- detail
- weight
- weight
record
- detail
- weight
but when mapping to the target in same style it was going this way
- detail
- detail
- weight
- weight
- weight
so what i did...i asked the portal people to add an identifier to the details and weights so that i can read it and write a UD to finally map it correctly:
- 1detail
- 2detail
- 1weight
- 1weight
- 2weight
- 2weight
it is working properly now....thanks to you all.....have given the points

Need some help! My iPhone 4 cannot play music through it's built in speaker, only with headphones. I also cannot adjust volume, it only shows "ringer". I really do not know when it starts. I already clean the jack and dock,reset it. Update it to IOS 7.1.1

Need some help! My iPhone 4 cannot play music through it's built in speaker, only with headphones. I also cannot adjust volume, it only shows "ringer". I really do not know when it starts. I already clean the jack and dock,reset it and still cannot be fixed. I updated it to IOS 7.1.1 recently only, does it have connection with the inconvenience I am experiencing right now? What should I do? Thanks!

Hi Melomane1024,
If you are still having issues with your iPhone’s speaker, you may want to look at the steps in this article -
iPhone: No sound or distorted sound from speaker
http://support.apple.com/kb/TS5180
Thanks for using Apple Support Communities.
Best,
Brett L

How can I use PreloadSWF with files built with -compiler.debug into Flash Player 11.4?

I'm using Internet Explorer 9 on Windows 7 (x64) with a debug Flash Player (version 11.3.300.271 - I'm using the ActiveX plugin for IE). Using Flex SDK 4.5.1.21328A I compiled the ActionScript code
    package MySample {
        import flash.display.Sprite;
        public class MyHook extends Sprite {
            public function MyHook(): void {
                super();
Into a `.swf` file by running the command
    mxmlc.exe -compiler.source-path=. -output=MyHook.swf -tools-locale=en -headless-server=true -static-link-runtime-shared-libraries -compiler.debug -- Sample\MyHook.as
I then preload this by creating an mm.cfg file and adding an PreloadSwf entry referencing MyHook.swf; running all this in Flash Player 11.3.300.271 works fine; I can point my IE to some web page containing flash applets and my own SWF file is preloaded just nicely.
However, the most recent Flash Player release on Windows (11.4.402.265) breaks this. After updating the player, any flash applet triggers error message boxes from Flash player saying "Verify Error #1014: Couldn't find spark.components.Application". Clicking the error away opens the same message box, but with a few different type names.
The workaround I found was to remove the -compiler.debug switch from the mxmlc command line; doing so make things work with Flash Player 11.4 but alas trace() doesn't work anymore.
Does anybody know how PreloadSWF can be used to preload debug SWF files into Flash Player 11.4?

Ah, thanks for making me aware of that forum - I didn't know about it. I now reposted the question at http://forums.adobe.com/thread/1068071 - this thread can be closed as far as I'm concerned. Should I mark your answer as being the resolution to my question or the like?

HTML5 videos won't play correctly with built-in player

1) When I try to play html5 video, firefox only shows me a few frames, and then screen become grayed and «loading» animation appears. Then it shows me next few frames, and a loading screen again. It continues until the whole video will load.
2) When it finally loads, video and sound are a little bit choppy if the video is in good quality. Other browsers play that videos without any lags or loading screens. Here's the example of one of that videos I couldn't watch normally: https://m.vk.com/video-51189706_170637645
I've looked up at memory indicator, and it showed me that I have at least 200Mbs of free RAM during the loading of these videos. Also every memory limit setting in about:config is set to -1.
I use the latest firefox version from Play Store and own an Asus TF300T tablet (nvidia tegra3 and 1Gb of RAM), so it's certainly not a lack of hardware power.
I also should note that when I watch youtube videos (with firefox, not youtube player, which I've removed), everything is fine — videos are playing and loading at the same time.

I cannot view that video however we are in the process of making some major changes to video playback on Android. Currently these changes are in our Aurora build of Firefox it can be downloaded at https://aurora.mozilla.org if you would like to see if this improves the video playback.

My music not playing with slideshow

Since updating my iPhoto to version '11 version 9.5, the music I select to play with my slideshows does not play. The canned theme music does play however.

I had problems with some 3rd party slideshow apps when I had the library on an external HD. However, I'm not sure I moved it there like I told you to do.
If you have Quicktime Pro there is a fairly easy way to add your music to the slideshow. It goes like this:
1 - export the slideshow from iPhoto without the music.
2 - if you have more than one music track to use join them together into a new file with an audio editor like Garageband, Amadeus Pro or Audacity.
3 - open your music track with QT Pro 7.
4 - Open the slideshow movie with QT Pro.
4 - in the slideshow window type Command+A (select all) and then Command+C (copy).
5 - go to the slideshow window in QT Player and select Edit->Add to Selection and Scale.
6 - save the merged item as a self contained movie.
This will add the slideshow to the music and scale the slideshows length to match the music. Don't do it the other way around as the music timing will be altered changing the speed and pitch of the music.
With this method and if you have more than one track you can overlap and fade between tracks eliminating the dead air that often results between tracks. It also will assure that the music will end with the last slide. NOTE: I add a blank, black slide at the end of my slideshows so the last slide fades to black and the music ends on the black slide.

HT204074 I have our music collection on iTunes Match for my PC, ipad and iphone. Can I share that music collection with my wife so she can play that with her iphone? Even though she has a different Apple ID from me?

I have our music collection on iTunes Match for my PC, ipad and iphone.
Can I share that music collection with my wife so she can play that with her iphone? Even though she has a different Apple ID from me?

Her iPhone will need to be set up to iTunes Match using your Apple ID to be able to share music via iTunes Match. Otherwise you'll have to download the music to your computer and then copy those tracks into her iTunes library, assuming hers is separate.
Regards.

HT1209 I've successfully imported the videos I've shot with my iphone5 into iphoto on my MacBookPro but they're only showing up as still shots, ie the imported videos don't play! Itunes no longer opens automatically when syncing!

I've successfully imported the videos I've shot with my iphone5 into iphoto on my MacBookPro but they're only showing up as still shots, ie the imported videos don't play! Itunes no longer opens automatically when syncing, and when I open itunes it shows that there are zero "home movies" in there, meaning that it never grabbed the videos from my phone either. What to do? Thanks!

tl:dr?
Really?
There was a short version expressly for people who weren't bothered to read a myriad of text.
Meh, not that it matters anymore. I ended up redownloading 70-odd albums, so I have the bulk of my music back. And I still have no idea what iTunes did with my files, but I'll make sure it never does it again.
I would thank you for the help but you were utterly useless. Oh well, carry on.

How to use the BD menu built into the player in Encore CS4

I cant get Encore to create a production that responds to the player Top Menu button (Panasonic Direct Navigator table). Cyberlink, which was bundled with the burner, does this by default. Place a number of videos into the production, dont create a menu, and OK!: Press the Top Menu button and the player's built in table pops up with a list of all titles.
In Encore, press the Top Menu button, and you get 'operation not allowed'. It appears that Encore requires a Title button action?, but opening the player table is not an option. There is no Title button on the remote; there is Top Menu and Popup Menu.
There's got to be a simple solution. Player menu tables have been around since DVDs.
thanks

I'm not aware of any method to access a menu system that is only built into hardware. My own Sony DVD does not have such a menu, and if there is none on the DVD, I get none during playback no matter which buttons I press.
The standard method is to add your own menu if you want a menu.

Problem with playing audio data using Real Player

i've seen the intruction for playing video data (.rm) using real player and it works. Then i tried to play audio data (.wav, .dat, .mp3) with real player, but it didn't work.
These are some codes i've wrote:
------------------------------------------- BEGIN PL/SQL CODES---------------------------------------
CREATE TABLE SONGS
( Item_ID number not null PRIMARY KEY,
Audio ordsys.ordaudio
create or replace procedure load_audio(id integer, filename in varchar2) as
obj ORDSYS.ORDAudio;
ctx RAW(4000) := NULL;
begin
INSERT INTO SONGS VALUES(ID,
     ORDSYS.ORDAudio.init());
SELECT audio into obj from Songs
where item_id = id FOR UPDATE;
obj.setSource('FILE','AUDIODIR', filename);
Obj.setDescription('A movie trailer');
Obj.setMimeType('audio/x-pn-realaudio');
Obj.setFormat('Real Media File Format');
obj.import(ctx);
UPDATE Songs
     SET audio=obj WHERE item_id=id;
COMMIT;
END;
show errors;
truncate table songs;
exec load_audio(1,'aud1.wav');
exec load_audio(2,'aud2.mp3');
exec load_audio(3,'testaud.dat');
-- just for comparison, i put a video file (.rm)
exec load_audio(4,'autorace.rm');
commit;
show errors;
create or replace procedure get_audio(
     audio_id in varchar2,
     mimetype out varchar2,
     data out blob) as
     tempBLOB BLOB;
     s varchar2(200);
begin
-- Deliver audio and mimetype
select t.audio.getcontent(), t.audio.getmimetype()
into tempBLOB, s
from songs t where t.item_id = audio_id;
data := tempBLOB;
mimetype := s;
end;
show errors;
---------------------------------------- END of PL/SQL CODES-------------------------------------
-----------------------------------MOUNTPOINT at FILESYSTEM rmsever.cfg-------------------
<List Name="pn-oracle-audio">
<Var Database="oracle"/>
<Var HeaderCacheSize="2048"/>
<Var LobFetchSize="32768"/>
<Var MaxCachedConnections="1"/>
<Var MountPoint="/dbaudio/"/>
<Var Password="ZGF2aWQ="/>
<Var ShortName="pn-oracle"/>
<Var SQL="get_audio"/>
<Var Username="skripsi"/>
</List>
----------------------------------------End Of MOUNTPOINT----------------------------------
then in the real player, i tried some urls :
http://david:88/ramgen/dbaudio/1 --> it didn't work, it was said invalid path
http://david:88/ramgen/dbaudio/2 ----> it didn't work, it was said invalid path
http://david:88/ramgen/dbaudio/3 ----> it didn't work, it was said invalid path
http://david:88/ramgen/dbaudio/4 ----> it worked
did i put a wrong url?
does the http://..../ramgen/... path is just for ram file?
can anyone show me the way to play audio data using real player?
Thanx before.

Yes, realserver expects an exact mimetype.
to make matters worse, it expects audio/x-pn-realaudio (an audio mimetype) for video!?!?!
Seems the code inside maps multiple file extensions to some mime type. Only one is allowed.
I have used the unix strings commands in teh plugins directory to find the exact mime type realserver is expecting. The file format plugins have this information in them.
Larry

Music Play with Queue Built Into Player

Similar Messages

Maybe you are looking for