Music player in control center doesn't work in iOS 7

I can't even use music player with pause, forward or anything in control center. If I wan't to skip to next song I have to slide the track till the end to go to next song.
And I can't even use my bluetooth control too.

Switch off and then switch on again solved the issue for me...

Similar Messages

Control center doesn't work all the time in iOS 8

I have the new iPhone 6+ and have noticed that sometimes I can't pull up control center.
I have to unlock it, then lock it again and then it will pull up. I use this method to access the torch at night.
Also to switch off the torch when the phone is locked, the camera icon could be tapped. However this feature doesn't work anymore.
Now I have to click the home button > swipe up the control center (hopefully it works) > tap the torch icon.
It used to be easier when you could just click the home button > tap the camera icon.
Please fix these issues soon.

You are not addressing Apple here, we are users like you, so we cannot fix these issues. If you would like to tell Apple what your problem is, then you can leave them feedback HERE. Click on the appropriate link.
However, if you want to try and troubleshoot your Control Center issue, then I would go into Settings>Control Center>Access on Lock Screen and if that is on, turn it off and back on again. Also, when accessing Control Center from the lock screen, make sure you are starting off of the screen when you begin to swipe upwards. That tends to work better. Sometimes starting on the screen, the finger does not get low enough for it to register.
As far as the flashlight button, I never attempted to turn it off with the camera, I just tapped in Control Center.

The music player on control center on ipad2

Since I updated my ipad2 , i have gotten hang of most of the new functions , but then I am having some issue with the music player on the control centre , there Is the play button and next there. But then i can't play music when I press play, then even after I open the music app and play from there,it's playing , but I cannot next on the control centre also , in IOS 6 , I could just start from the control centre by pressing play without opening the music app , is it the IOS 7 issue or it's my iPad not working ? The rest is all fine but . Can someone help please .

yeah even i am facing the same issue. The sound works for some time and the moment i get happy that the issue is solved, the bingo no sound.
Its really frustrating i have to say and also i have noticed the over all volume of the ring tones has come down.

Game Center doesn't work on iOS 6. It's crashing.

Game Center crashes every single time. On iPhone 4 it works fine. What can I do to make it work? Does it work for you?

Maybe the reason is that "authenticateWithCompletionHandler:" has been deprecated in iOS 6.0
http://developer.apple.com/library/IOS/#documentation/GameKit/Reference/GKLocalP layer_Ref/Reference/Reference.html

My iPhone 5s sounds stop working.i did not do anything it just stop working when I tried to turn on my music player all the sounds is not working I already check the volume and it is not also muted :( what happened can anyone solve my prob

Hello everyone my iPhone 5s sounds stop working.i did not do anything it just stop working when I tried to turn on my music player all the sounds is not working I already check the volume and it is not also muted :( what happened can anyone solve my problem please

Hey Kirby17,
Thanks for using Apple Support Communities.
If you are not getting any sound from the speaker, follow this article.
iPhone: No sound or distorted sound from speaker
http://support.apple.com/kb/ts5180
Ensure that there is nothing plugged in to the headset jack or the dock connector.
If the iPhone is in a protective case, make sure that the speaker port isn't blocked by the case.
Make sure that the speaker and dock port aren't clogged with debris. If necessary, clean it with a clean, small, dry, soft-bristled brush. Carefully and gently brush away any debris.
If an audio issue occurs when using a specific application, try testing other applications to see if the issue persists.
If the iPhone is paired with a Bluetooth headset or car kit:
Try turning off Bluetooth.
If you experience difficulties with the Bluetooth feature, follow these troubleshooting steps.
Restart the iPhone.
If restarting doesn't fix the issue, ensure that your iPhone is updated to the latest version of iOS.
If the issue is not resolved, please contact Apple Support.
Have a nice day,
Mario

Control Center isn't working

Hello,
general information:
I am busy with setting up a new environment using oracle apps 10.5.10, owb 10gR2 and discoverer 10g. There a 2 databases, 1 database for the use of apps and discoverer and 1 database for the use of owb to keep the repository in.
problem:
When I want to deploy something in de control center. The control center doesn't open sometimes and give me some errors like: do you use the right port, service name and listener name and that the service cannot be started. When I now start the control manager using the start control center which I can find in my start menu (from windows) it doesn't work (I just see nothing and nothing happens)
When I start the control center using sql+ with start start_service.sql, it says available. Now I can open the control center but it doesn't deploy anything, The item that is going to be deployed keeps running, but nothing happens.
When I run the service_doctor script, then I get the following output:
SQL> @H:\SERVICE_DOCTOR
There are errors in one or more PL/SQL packages and functionsPlatform properties have been loaded correctly
Platform location has been seeded correctly
NLS messages have been loaded correctly
The platform service is available
There is a problem accessing the service startup script from the databaseserver
Here is the detailed error message which contains the name of the startscript file:-
Service startup file 'null/owb/bin/unix/run_service.sh' is notaccessible from the database server on instance number 1
Please verify that the disk containing the file is visible to thedatabase server
Please verify that the database server account has access rights on thefile
Connection information stored within the repository is correct
PL/SQL procedure successfully completed.
Can anyone help me?? Because I don't know where to look anymore
Best Regards,
Remco

Hi
I'm facing the same problem. My control center doesn't seem to run at all. It always throws exception when i run the script Show_Service from sql*plus.
There are errors in one or more PL/SQL packages and functionsPlatform properties have been loaded correctly
Platform location has been seeded correctly
NLS messages have been loaded correctly
The platform service is not available
There is a problem accessing the service startup script from the databaseserver
Here is the detailed error message which contains the name of the startscript file:-
Service startup file 'null\owb\bin\win32\run_service.bat' is notaccessible from the database server on instance number 1
Please verify that the disk containing the file is visible to thedatabase server
Please verify that the database server account has access rights on thefile
Connection information stored within the repository is correct
PL/SQL procedure successfully completed.
When I run the start_service it says
Not available
Diagnostics:
service startup failure using command "cmd /q/c \owb\bin\win32\run_service.bat
-manual 1 TEST APPS-WSUS 1521 ORCL" reason ORA-29532: Java call terminated by
uncaught Java exception: java.io.IOException: service early exit: code=1 : err=
The system cannot find the path specified.
: out=
Please help me out in this.
Thank You

HP Officejet Pro 8500 A909a_ Scan with HP Solution Center doesn't work

Hallo.
My name is Michele.
I can't use HP Solution Center for scanning with my HP Officejet Pro 8500 A909a (I have windows 7 O.S.) because, when I click on "Scan document" , a white error windows appears and says"Necessary Component is not founded or not correctly installed. Install again HP Photosmart software" . I uninstalled and installed again the software but it doesn't work. Previously it worked with XP. Recently I've updated XP with Windows 7 and I found HP Solution Center doesn't work. Perhaps it doesn't match with Win 7?
Thank you to everyone who wants help me
This question was solved.
View Solution.

Hi Folks,
I appreciate the time you have taken trying to resolve this issue. I was able to do some more research, and found a helpful solution, please click on the link below to get started:
The HP imaging device was not found... -Error popup
Please try the recommendation and let me know the outcome.
Thanks,
HevnLgh
I work on behalf of HP
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to the left of the reply button to say “Thanks” for helping!

Rayv Player on FoxSoccer.TV doesn't work on Snow Leopard

Since upgrading to Snow Leopard, the rayv Player for this website doesn't work. I've tried running Safari in 32-bit and also tried Firefox. At most, I get some sound, and then the browser crashes. There seems to be an issue with FlashPlayer 10.
Does anybody have a solution for me?

From the SL review at arstechnica...
"The sleeping Mac dilemma
I don't like to leave my Mac Pro turned on 24 hours a day, especially during the summer in my un-air-conditioned house. But I do want to have access to the files on my Mac when I'm elsewhere—at work, on the road, etc. It is possible to wake a sleeping Mac remotely, but doing so requires being on the same local network.
My solution has been to leave a smaller, more power-efficient laptop on at all times on the same network as my Mac Pro. To wake my Mac Pro remotely, I ssh into the laptop, then send the magic "wake up" packet to my Mac Pro. (For this to work, the "Wake for Ethernet network administrator access" checkbox must be checked in the "Energy Saver" preference pane in System Preferences.)
Snow Leopard provides a way to do this without leaving any of my computers running all day. When a Mac running Snow Leopard is put to sleep, it attempts to hand off ownership of its IP address to its router. (This only works with an AirPort Extreme base station from 2007 or later, or a Time Capsule from 2008 or later with the latest (7.4.2) firmware installed.) The router then listens for any attempt to connect to the IP address. When one occurs, it wakes up the original owner, hands back the IP address, and forwards traffic appropriately."

I have downloaded my latest flash player and it still doesn't work, why?

I have downloaded my latest flash player and it still doesn't work, why?

Lightroom doesn't use the Camera Raw plug-in. All of the Camera Raw technology is part of the Lightroom program. You will either have to upgrade to Lightroom 5 or use the DNG converter to create digital negative copies that can be used with Lightroom 4.

Finally got round to buying an iPhone 4, really excellent to start with. The sharing of music from my Mac Mini was excellent. ios6 update has ruined all that! The artist view miss's out most of my music and the sharing sometimes doesn't work at all!

Finally got round to buying an iPhone 4, really excellent to start with. The sharing of music from my Mac Mini was excellent. ios6 update has ruined all that! The artist view miss's out most of my music and the sharing sometimes doesn't work at all!
How do I get this feature working again? I am reluctant to move to iTunes 10.7 because I don't trust Apple at the moment.

My suggestion:
1) Always using MAC AIR with the power plug in.
2)Don' let the power level of battory fall under 30% percentage.
3)If the MAC can't be recharged now, just let it be with power plugged, WAIT...

Wake up doesn't work After IOS 7 with my Philips clock radio AJ3270D

Wake up doesn't work After IOS 7 with my Philips clock radio AJ3270D!
The other function is OK(listen music like an Ipod or charge)
Can you help me?

Apple did update their help section on the app. I found this trying to figure out why my Find Friends wasn't working after the update to iOS 7.
"Find My Friends is turned on in Background App Refresh (in Settings > General in iOS 7). When Background App Refresh is turned off, Find My Friends can’t use Location Services in the background. If Background App Refresh is turned on, but you quit Find My Friends via the multitasking interface, location updates won’t be sent to your friends until you open the app again."
Hopefully Apple will update this as it was not this way prior to iOS 7. Killing the app didn't prevent your location from updating in iOS 6 as I constantly killed the apps running in the background and never had this problem till the update. Hope this helps! Just make sure to not kill the app as of now and to tell everyone you follow not to kill their app and locations will continue to refresh. Otherwise it won't update locations till the app is opened again.

Touch ID doesn't work after ios 7.1.1 update

Touch id doesn't work after ios 7.1.1 update..
Why????

After IOS update, you first have to use passcode.
Passcode is needed when
After restarting your iPhone 5s
When more than 48 hours have elapsed from the last time you unlocked your iPhone 5s
To enter the Touch ID & Passcode setting

HT4847 Why is the "done" button inactive when I try to downgrade my iCloud storage plan to 5GB free? Doesn't work from iOS device or macBook system preferences. I didn't sign up for a $40 plan.

Why is the "done" button inactive when I try to downgrade my iCloud storage plan to 5GB free? Doesn't work from iOS device or macBook system preferences. I didn't sign up for a $40 plan.

I found the solution .,,,
1) click on your current plan and press done your payment details will appear .
2) the first section is your plan and there is a botton "change" click on it
3) it will take you back to the upgrade options
4) press on the downgrade options
5) choose the 5 GB and the done botton will be enabled
6) click on it you'll back to the step number 2 , here read carefully you'll see that your changes will take effect after the current plan expired with the date.

TS1702 How do I hide purchased apps with iOS 6? With iOS 5 you can swipe the unwanted app to hide it, but this doesn't work with iOS 6.

How can I hide an app from the list of purchased apps using iOS6? With iOS 5 you can swipe the icon to display a red Hide icon, but this doesn't work with iOS 6. Suggestions (that work) will be appreciated.

Yes. On a computer. Not ios6.
On iTunes on your computer under purchased, select the x on the top corner. That will hide them.

ITeufel Radio v2 doesn't work with iOS 5.0.1

My iTeufel Radio v2 doesn't work with iOS 5.0.1.
It does not charge (just a short "beep" when connecting, but then it does not charge) and the audio function also doesn't work.
I already tried to reset the phone, but this didn't help.
Any ideas? Thank you.

I got Wi-Fi to reconnect by restarting my router and re-entering the wireless password. I wonder if the wireless account passwords were lost in the update process? I wonder if I would have just had the phone “forget” the wireless account and reconnect if that would have worked.
On an interesting side note, the exchange server connected after I got Wi-Fi back working! I am wondering if there is a issue with 3G and the new IOS 5.01? I could not get any exchange connectivity after the update on 3G.

Music player in control center doesn't work in iOS 7

Similar Messages

Maybe you are looking for