Music playing too loud.

i just got a new ipod lately and i noticed that certain songs on my ipod play ridiculously loud, so much that it hurts my ears, for no reason and i was wondering if anyone else had this problem? im getting sick of having to delete all those songs and also it cant be good for my ears or earbuds. does anyone know if this is fixable?

Hey there,
One solution is to alter the song's overall volume individually in iTunes. To do this, right->click the song in iTunes and choose Get Info from the Menu. From there, head over to the Options tab.
At the top should be a bar where you can drag the slider up and down depending on whether or not you wanted it louder or softer. When you are satisfied with the changes, go ahead and hit ok.
Lastly, hook your iPod up to your computer and resync the song to update it on your iPod.
Hope this helps.
B-rock

Similar Messages

  • Ipod playing too loud?

    Hi there, JOSH!!! Oooooooohhhhhhhhh! Anyway, I've been having some problems with my ipod nano (4th gen) recently and I'm wondering if ya'll could help me out, if you'd kindly :3
    Firstly the ipod is playing too loud, way too loud. Now this is not just your typical loudness, this is.... Advananced loudness.... To the point that the song becomes barely listenable.. Ok, to give you an example, let's say I'm listening to "POWER" by Kanye West. When the drums and the 'beat' come in at about 0:25 it just sounds like grabbled static, really loud, grabbled static. :/
    And I've no idea what's going on.. At first I thought that the bass and treble in the equalizer was too high, but it turned out the equalizer wasn't even on :S Then I tried restoring it to factory settings (Several times), but that didn't work either. And 'then' I thought it might just be the headphones, but that was a dead end too! :O Now I'm left wondering, just what the **** is going on :/ Anyone have any ideas on this? (P.S Volume limit was never used)
    Secondly it runs out of battery, like that *Clicks fingers* I think after 45 minutes it's already out of juice. :/ Though I believe that this might be due to the 'loud' problem, it could be something else ...
    Thirdly it keeps 'crashing' and it's not just a 'hold down ya menu and play button and it'sa better' crash. It's a 'Restore to factory and resync your whole ****ing libeary everytime' crash :/
    It's only recently started doing this. About the time itunes was last updated.. I synced up and poof ipod starts acting funny :S
    So can anybody find me!!! Somebody tohelpmefixmyipod?
    As a note my Nano magically recovered from being dropped in water about a year. However it's been working just fine and dandy for about 5-6 months now.

    Try verifying that you do not have optional volume adjustment cranked up.
    While in iTunes, get info on a track that is having this issue.  Go to the options tab and at the top there is a "Volume Adjustment" setting. It should be set to "None". If it is set to +100%, that is your problem.
    To fix, all of them at once, you can select all in your music library, then right click and select "Get Info" it will ask if you want to change multiple files at once, say yes. Then go to the options tab and set it to None and it will put that on all your tracks.
    click ok, resync your music and see if that does it.
    i

  • Sound plays too loud

    Sounds embedded in flash movies play too load. The Windows
    gain settings in Master Volume and Wave have to be adjusted all the
    way down and even then some sounds are distorted (as if they are
    being played too loud) even though the sound is low volume.
    It is as if a gain setting is getting set too high by
    default.
    This happens on some XP SP2 computers but not other XP SP2
    computers.
    Might be sound card related. It happens on nVidia nForce2
    MCP-T (latest version of driver).
    I tried embedding wav instead of mp3. I get the same effect
    but at least the wav sound doesn't distort so badly that it can't
    be fixed by turning down the master volume.
    Please let me know if I need to post more information about
    the problem.

    You can reduce the "Wave" Volume to half or below to leave the master volume the same level, that will solve the Volume problem.
    http://www.cisco.com/image/gif/paws/23502/VMOAudioSettings-1.gif
    For the scroll sensitive: you can also reduce this in the system preferences, but its is still not the same feel like in OSX.
    Thats how I kind of solved these issues.
    Message was edited by: ferdinand l.

  • Music plays too fast-help!

    I have downloaded itunes to my Compaq laptop and all music plays too fast. I don't think it's an itunes problem, i think it's something i need to adjust on the laptop, but I can't figure out what to adjust. Any thoughts?

    Hi- thanks for the direction.. unfortunatey, same problem but no answers there on that link that I could see.. Also, i'm not recording my voice but am plugging in MP3 songs. Any other ideas?

  • Why won't my music play out loud anymore?

    I usually plug my iPhone into my radio and the sound bar disappears, I'm used to that and when I'd unplug it it'd be back and my music would play out loud no problem.
    Well as of yesterday it doesn't play outloud.  My alarm wouldn't even go off this morning ,  my ringtone will go off no problem when I get a call or text.  But to play music I don't get the sound bar.  I can plug my headphones in at it appears.
    I've shut my phone off and restarted it.  
    I also held the sleep button and home button to reboot it . 
    Nothing .
    Is there a setting I need to change ,  ? 

    Try inserting and removing the headphones several times in a row to try to release the mechanism that has not released which currently indicates the headphones remain inserted when they are not. The ringtone for a call will go off regardless if headphones are inserted - for those with headphones inserted and being used that may remove the headphones from their ears and set the phone down temporarily without removing the headphones from the iPhone - so a call won't be missed.

  • Why is music playing too slowly in car?

    Just synced my phone last night. Now music is playing too slowly. What gives and how can it be fixed?

    what do you mean it is playing too slowly? like ths ongs are physically slowed down?

  • No music playing out loud :( help

    My iphone says it's playing music but the volume slider is there but it won't let me move it it doesn't work when I put head phones in either some time it will play for about 2 seconds out loud then go off again but still says it's playing in my screen. The sound on my videos is the same but Siri and phone calls are fine! help!!

    I had this problem as well but I fixed it, your iPhone thinks that it is in docking mode. What you need to dio is take a new toothbrush and scrub out the charging/docking port and the headphone port. You can also take a pin and clean out the charging/docking port to get rid of grime on the sides. Hope this helped.

  • Music plays too fast

    I was listening to music on my Blackberry, and leant on it. Somehow, I managed to make the music fastforward so that four seconds of the song is played in one actual second. I've tried everything to stop this, I've stopped the song, played other songs, turned the phone on and off again, and yet the same thing happens.
    If anyone could help me, that would be fantastic because I really can't do without my music and I use my blackberry as an ipod, so I have no other alternative.
    Solved!
    Go to Solution.

    Hello  BBUser1122,
    Welcome to The Community ,
    Please Try a Battery Pull Restart i;e. while device is on pull out the battery and wait for a min. then re-insert
    the battery wait for the device to Reboots. then take a try .
    Good Luck.
    Click Like if problem resolves.
    Click " Like " if you want to Thank someone.
    If Problem Resolves mark the post(s) as " Solution ", so that other can make use of it.

  • Music playing too f

    Can anyone help me - when i try and play MP3 files in the playcentre the songs are like chipmonks they play at a very fast speed.
    Thanx in advance
    louthman

    in the EAX console there is an option for time scaling, make sure that the time scaling feature is off, also you can acess it from the creative media player, and there is a slider there that controls the speed . I hope this hel
    ps.
    ..easygoin77

  • Headphones too loud.

    Does anyone else think the music plays too loud through headphones? I find that it is too loud when set at the lowest possible volume to comfortably listen to in a quiet office. Am I just crazy? Never had this problem with my ipod.

    try to go to settings; ipod; sound check; switch it to on. This may help you.
    Mathew

  • When I burn a slideshow from wondershare fantashow the music is to loud even when I play it on the tv and turn the tv down the music burned on the dvd is still too loud and has a vibrating sound like too much volume.

    Hello does anybody know about wondershare fantashow for mac? when I burn a slide show to a dvd the music is too loud. then when i play it on my tv and turn my tv volume down the music on the dvd is still vibrating too loud. How do I adjust that in fatashow before I burn it to dvd? thank you

    Hadn't heard of it before today!
    There are many ways to produce slide shows using iPhoto, iMovie or iDVD and some limit the number of photos you can use (iDVD has a 99 chapter (slide) limitation).
    If what you want is what I want, namely to be able to use high resolution photos (even 300 dpi tiff files), to pan and zoom individual photos, use a variety of transitions, to add and edit music or commentary, place text exactly where you want it, and to end up with a DVD that looks good on both your Mac and a TV - in other words end up with and end result that does not look like an old fashioned slide show from a projector - you may be interested in how I do it. You don't have to do it my way, but the following may be food for thought!
    Firstly you need proper software to assemble the photos, decide on the duration of each, the transitions you want to use, and how to pan and zoom individual photos where required, and add proper titles. For this I use Photo to Movie. You can read about what it can do on their website:
    http://www.lqgraphics.com/software/phototomovie.php
    (Other users here use the alternative FotoMagico:  http://www.boinx.com/fotomagico/homevspro/ which you may prefer - I have no experience with it.)
    Neither of these are freeware, but are worth the investment if you are going to do a lot of slide shows. Read about them in detail, then decide which one you feel is best suited to your needs.
    Once you have timed and arranged and manipulated the photos to your liking in Photo to Movie, it exports the file to iMovie  as a DV stream. You can add music in Photo to Movie, but I prefer doing this in iMovie where it is easier to edit. You can now further edit the slide show in iMovie just as you would a movie, including adding other video clips, then send it to iDVD 7, or Toast,  for burning.
    You will be pleasantly surprised at how professional the results can be!
    To simply create a slide show in iDVD 7 onwards from images in iPhoto or stored in other places on your hard disk or a connected server, look here:
    http://support.apple.com/kb/HT1089

  • TS1630 I can't hear music through earphones on  my iphone--it plays out loud

    how do I get music to play through headphones on my iphone.  The music plays out loud but not through the headset

    Are you using a case for you iphone?  if you are as a test remove the case and plug jack in and see if the headphones work.  if it does work, just make sure you have the jack plugged in all the way when the case is on.

  • Download music plays at different speed on differe...

    I have two N70s with different software versions. The same music download plays at different speeds on the two phones. It plays at the right speed on the older one but the music plays too fast on the newer one. The versions are below. Any ideas why this is?
    Phone 1) Firmware: V 2.0539.1.2 19-10-05 RM-84
    RealPlayer: s60.26.25.01 D 21-Jun-2005_13:02:43
    Phone 2) Firmware: V 3.0546.2.3 18-11-05 RM-84
    RealPlayer: s60.26.35.01 D 30-Aug-2005
    Thanks,
    Ruth

    Does the other user account have a third party download manager installed?

  • Volume on iPod Too Loud But Unable to Lower

    On my iPod, the volume is turned all the way down, but it still plays too loud. Does anyone know how to fix this?
    Thanks for any help.

    There is a chance that the iPod is a European model, which has a much lower maximum volume compared to the US models.  Just a thought though.
    B-rock

  • Just installed IOS 7.0.2 (11A501) on Iphone now the sound when I play music is too low even when I crank it as loud as it will go. I used to be able to hear it when I mowed the lawn. not anymore. any suggestions?

    just installed IOS 7.0.2 (11A501) on Iphone now the sound when I play music is too low even when I crank it as loud as it will go. I used to be able to hear it when I mowed the lawn. not anymore. any suggestions?

    This should solve the problem
    Settings > General > Reset > Reset All Settings
    It will not erase any of your personal data, just reset the settings.
    Hope this helps.

Maybe you are looking for

  • 500 Internal Server Error while trying to view report from portal page

    Hello guys, We are using BI7. while accessing the queries for the reports, its displaying  the 500 Internal Server Error. The error message is: 500 Internal Server Error Failed to process request; contact your system administrator BEx Web Application

  • Use of KEY-OTHERS trigger

    Hi, I have a form that has numerous triggers defined at the form level. The form has a block that appears in a dialog window. The block should only have a small subset of triggers that are defined at the form level. I went ahead and created the key t

  • Upload printer driver in SAP

    Hi , I am trying to upload the new printer driver in SAP. I downloaded the new SAP printer driver and trying to load into SAP thru SPAD. when I am trying to import the driver its asking for Development Class. PLEASE let me know which Development clas

  • Youtube and WiFi

    i can't connect to my youtube or wifi, youtube is popping up and saying "cannot connect to youtube" and wifi is saying I'm entering the wrong password. Please help

  • Hi i tried to update my g5 with mac os x 10.5.1 to 10.5.8

    whilst updating i pulled out my usb when it was installing then i tried re installing but nothing was working i then switched the power mac off to restart it but its stuck on the apple screen and i cant open the disk drive to put a disk in to re inst