Music plays with snarks on Win Vista 64 bit

Hello,
I have Iphone 4 and Win Vista 64 bit. The problem is when I copy any music to my device from Itunes it starts playing not from the start but approximately from ten second. After some time it comes to the start and than track plays with crashes, like on an old vynil record. I`ve thought it`s something with my Iphone but tried to copy music from Itunes on Win 7 32 bit and it went off well. Is it a bug with Itunes64 or maybe I`ve missed some settings?
Help me, please

Marty,
As a matter of fact, yes, I just the other day installed PSE2 on my new
Vista 64 bit machine and it installed without any complaints and now works
like a charm. I had seen several posts where folks reported assorted
problems doing so, but none here. It may be a matter of memory? I have 6
GB and a quad core processor.
Juergen

Similar Messages

  • When listening to an audio book it freezes after about 10 minutes. I have done a soft reset, I have deleted the audio book and re- installed. My music plays with no problem.

    Using my ipod nano -when listening to an audio book it freezes after about 10 minutes. I have done a soft reset, I have deleted the audio book and re- installed. My music plays with no problem.

    Please read this whole message before doing anything.
    This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
    The purpose of the test is to determine whether the problem is caused by third-party software that loads automatically at startup or login, by a peripheral device, by a font conflict, or by corruption of the file system or of certain system caches.
    Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards, if applicable. Start up in safe mode and log in to the account with the problem. You must hold down the shift key twice: once when you turn on the computer, and again when you log in.
    Note: If FileVault is enabled, or if a firmware password is set, or if the startup volume is a Fusion Drive or a software RAID, you can’t do this. Ask for further instructions.
    Safe mode is much slower to start up and run than normal, with limited graphics performance, and some things won’t work at all, including sound output and Wi-Fi on certain models. The next normal startup may also be somewhat slow.
    The login screen appears even if you usually login automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
    Test while in safe mode. Same problem?
    After testing, restart as usual (not in safe mode) and verify that you still have the problem. Post the results of the test.

  • Can I install win 8 64 bit OS on dv6936 laptop win vista 64 bit OS

    I just purchased the HP Pavilliom 500 destop and would like to upgrade my laptop with desktop OS.
    Can I install my hp Pavilion 500 PC win 8 64 bit OS on my hp pavillion dv6936 laptop win vista 64 bit OS

    Hi Ibdman,
    You cannot use the Pavilion 500 desktop recovery disks to upgrade the operating system on your HP laptop.
    You would have to purchase either: a Win 8 retail upgrade or full install disc to change the operating system on your laptop.
    If you are considering upgrading your laptop you should consider Win 7 64 bit instead of Win 8.
    Jaco
    ****I am not an HP employee****
    Please give a" Kudos" if advice received is relevant or" Accept as Solution" if your problem has been solved.
    HP Products:
    810-150se Desktop
    17t-j000 Notebook
    1380t Desktop
    560z Desktop
    Errare humanum est.

  • HOW TO INSTALL ACROBAT X STANDARD ON WIN VISTA 64 BIT. FROM ORIGINAL CD. GIVES ERROR MESG .. ?

    HOW TO INSTALL ACROBAT X STANDARD ON WIN VISTA 64 BIT. FROM ORIGINAL CD. GIVES ERROR MESG .. ?
    WHILE I WAS USING THIS APPLICATION ON SAME OS

    Hi shaz2048,
    Could you please provide us the Error message or the screenshot of the Error. Also did you try installing the software after copying the contents from the disc onto your computer.
    regards,
    Abhijit

  • Lt R 5 software disc for Win Vista 64 bit machine

    I am currently using Lt Rm 5 Beta on my Win Vista 64 bit machine and want to upgrade to the latest release of Lt Rm 5. The disc sellers that I have looked at all say that the platform must be Win 7 or 8. Adobe told me that Lt Rm 5 would run on Win Vista 64. What am I missing.
    David

    I'm surprised that Adobe would tell you that, because their own web site does not list Vista as a supported operating system for Lightroom 5

  • Stop theme music playing with loaded I-tune music

    Load my photo's and video and along with the theme and now I want to get rid of the music that is playing with the theme and play only the music I loaded, but the theme music is also playing in the background at a lower pitch.

    Does the sound only come on the instant you press the "increase volume" key? (In other words, does it seem like the default "volume up/down" click noise has been replaced by another piece of sound?). To verify, in the Finder's Go menu, locate "Go to Folder", and when prompted, paste in:
    cd /System/Library/LoginPlugins/BezelServices.loginPlugin/Contents/Resources
    When the folder opens, scroll to the bottom and look for "volume.aiff". Double-clicking will open it in iTunes and you'll be able to hear if it's the correct "click" sound or something else.
    Or, is the sound always there and you just notice it more when you turn the volume up? - In that case, check your Dashboard and make sure there isn't a widget there playing music.
    Matt

  • Win Vista 32 bit to windows 7 64 bit how to back up firefox bookmarks, passwords?

    Currently on Vista 32 bit OS. Using FRESH HDD I'm switching to Windows 7 64 bit... Want to back up everything to external hard drive to put on new HDD.
    '''''FIREFOX passwords, bookmarks, cookies, maybe even settings?'''''
    1) Able to backup 32 bit firefox stuff and restore/copy to Windows 7 64 bit?
    2) All locations of files to back up - bookmarks, passwords, ect..)
    what process to use to get on new windows 7 64 hdd?
    copy files/folders to new location with-in windows 7???
    * Know a lot/all(?) app data cannot be used from 32 bit on 64 bit, but there has got to be a way to not lose all my firefox user data (especially bookmarks and passwords!)
    Thanks

    Even on 64-bit Windows, Firefox is a 32-bit application, so your data will be usable. It is easier if the version is the same on both (e.g., Firefox 3.6 to 3.6, Firefox 5 to 5).
    Check out these articles:
    [https://support.mozilla.com/en-US/kb/Backing+up+your+information Backing up your information] (You can copy your entire Firefox profile folder onto a USB flash drive or other external media. Or both!)
    [https://support.mozilla.com/en-US/kb/Recovering+important+data+from+an+old+profile Recovering important data from an old profile]
    Hope this helps.

  • Photoshop Elements 7 on Win Vista 64 bit

    Ihave an Acer Aspire M5642 PC, Windows Vista Home Premium 64 bit. Just bought Adobe Photoshop Elements 7. Will it run OK on this Vista 64 system? What do I do to get Photoshop working on this machine?
    Marty

    Marty,
    As a matter of fact, yes, I just the other day installed PSE2 on my new
    Vista 64 bit machine and it installed without any complaints and now works
    like a charm. I had seen several posts where folks reported assorted
    problems doing so, but none here. It may be a matter of memory? I have 6
    GB and a quad core processor.
    Juergen

  • Music Play with Queue Built Into Player

    With my Sonos player I can add music while a song is playing by simply touching the song I want, It then ask if I want to add it to my queue.  The advantage is that I don't accidentally stop the song I was playing and the one I'm trying to add to the queue starts playing.
    I know Sonos only works with wifi, but is there any available player for an iPad that would allow me to add songs while another is still play that has a queue feature.  I know most have a playlist feature, but that's not what I am looking for. 
    I have an iPad Air Operating System is 7.0.4

    Stefen
    My Inbound file was coming correctly like this :
    record
    - detail
    - weight
    - weight
    record
    - detail
    - weight
    but when mapping to the target in same style it was going this way
    - detail
    - detail
    - weight
    - weight
    - weight
    so what i did...i asked the portal people to add an identifier to the details and weights so that i can read it and write a UD to finally map it correctly:
    - 1detail
    - 2detail
    - 1weight
    - 1weight
    - 2weight
    - 2weight
    it is working properly now....thanks to you all.....have given the points

  • X-Fi Extreme Music || when installing drivers for windows vista 32 bits, error mess

    I get an error message when I install windows vista 32bits drivers for my X-Fi Extreme Music... it says, error while installing, can't find a compatible product on your system, verify if it has been corectly installed ... BUT INSTALLING I JUST WHAT I WANNA DO ! WTF?
    all other software for hardware management can see that my sound card is connected to my mother board, so i don't understand why the driver installer can't see it too and install the drivers ...
    Could someone give me a tip to help me to install my drivers please?
    i got windows vista 32bits build 6000 , X-Fi Extreme Music, 2048 RAM, Pentium4 3.6ghz 250 go hdd space ...
    I'm waiting for some cool answers, thanks ! ...

    You are wrong. The 2.3 are for extreme music, you are thinking about extreme audio. Creative have really made a blunder with these names, not strange many are having problems. Propably trying to install extreme audio drivers on extreme music, and the other way around!?
    Check that you have the right drivers, if you do. Try the trick where you unpack the driver exe file, so you get all the files from the installer on to a folder of youre choosing. Then use the "Creative Update Utility" popup to install/force the drivers to install. If you dont know what im talking about, search the forums, its been explained many times here.

  • Dv9608nr wont play bluray movies i have vista 32 bit dont know what to do.

    hello my laptop  wont  play bluray movies I install the bluray drive yesterday  i have vista home premium 32 bit  and my laptop is an hp dv9608nr, graphics card is -nvidia geforce go 7150m

    Save this to the desk top, do not install it from a temporary folder.
     ftp://ftp.hp.com/pub/softpaq/sp53001-53500/sp53029.exe
     Click on it to run and after it's finished installing restart your laptop and try a Blu-ray.
     You may also have to disable your firewall and anti-virus software during the download and installation.

  • Problem with version 8 and Vista 64 bit?

    Hi. I have just bought a new PC and seem to be having a problem. When I start iTunes I get this message
    "Warning. The registry settings used by iTunes drivers for importing and burning CDs and DVDs are missing. This can happen as a result of installing other CD burning software. Please reinstall iTunes"
    I have not installed any other burning software and have tried to re install iTunes but still get the same message. Any ideas? Software currently installed is:2007 Microsoft Office system Version 12.0.6331.5000 *
    Acrobat.com *
    Adobe Acrobat Version 9.0.0.2008061200 *
    Adobe AIR 1.5 Version 1.5 *
    Adobe Reader Version 9.0.0.2008061200 *
    Agatha Christie - Death on the Nile Version 1.1.0.22 *
    Apple Inc. - Bonjour Version 1,0,5,11 *
    Apple Inc. - iTunes Version 8.0.2.20 *
    Apple Inc. - QuickTime QuickTime 7.6 (1292) *
    Apple Mobile Device Service Version 2.12.33.0 *
    Apple Software Update Version 2.1.1.116 *
    ArcSoft, Inc. - PhotoStudio Version 5.5.0.93 *
    Belarc, Inc. - Advisor Version 7.2x *
    Canon IJ Driver Uninstaller Version 1.4 *
    Canon IJ Utility Uninstaller Version 1, 4, 0, 0 *
    CANON INC. - CNSLMAIN.EXE Version 1, 2, 0, 0 *
    CANON INC. - Easy Guide Viewer Version 1.0.1.0 *
    CANON INC. - MP Navigator EX Version 2, 0, 0, 0 *
    CyberLink - DZM Version 2.00.0222 *
    CyberLink - PowerStarter Version 6.00.2111 *
    CyberLink Corp. - HP DVDSmart Version 2.0.1.2213 *
    CyberLink Corp. - HP DVDSmart Version 5, 0, 0, 0 *
    CyberLink Corp. - HP MediaSmart Music Version 2.0.1.2217 *
    CyberLink Corp. - HP MediaSmart Photo Version 2.0.1.2217 *
    CyberLink Corp. - HP MediaSmart Video Version 2.0.1.2217 *
    CyberLink Corp. - LabelPrint Version 2.5.0.0904 *
    CyberLink Corp. - Power2Go Version 6.0.0.2112 *
    CyberLink Corp. - PowerDirector Version 7.00.2202 *
    CyberLink Corp. - StartMen Application Version 1.00.0613 *
    CyberLink MediaLibray Service Version 2, 3, 2203, 0 *
    CyberLink PowerCinema Version 2.0.1.2217 *
    EasyBits Software AS - Magic Desktop Version 1.0.0.0 *
    Enable HP Product Improvement Data Collection *
    HelpLaunch Version 1.0.0.0 *
    Hewlett-Packard - HP Health Check Scheduler Version 3.1.9.1 *
    Hewlett-Packard - HP Health Check Service Version 3.1.9.1 *
    Hewlett-Packard - HP Installer Version 8,5,0,70 *
    Hewlett-Packard - HP MediaSmart Version 2.0.1.7 *
    Hewlett-Packard - HP Software Update Client Version 4, 0, 12, 1 *
    Hewlett-Packard - HP Total Care Advisor Version 2.4.5106.2815 *
    Hewlett-Packard Co. - hp digital imaging - hp all-in-one series Version 082.000.188.000 *
    Hewlett-Packard Co. - hp digital imaging - hp all-in-one series Version 111.000.006.000 *
    Hewlett-Packard Company - HP Solution Center Version 074.000.017.000 *
    Hewlett-Packard Company - HPEasyBackup Version 1.0.0.1 *
    Hewlett-Packard Company - hpsysdrv Application Version 2.00.00 *
    Hewlett-Packard Company - LightScribe Version 1.14.25.1 *
    Hewlett-Packard Development Company, L.P. - HPSysInfo Application Version 9.5.1.0 *
    Hewlett-Packard, Co. - HP PhotoSmart Essential Version 1.12.0.46 *
    HP Color LaserJet 2600n Version 1, 0, 0, 1 *
    HP Easy Backup Button Service *
    Intel Corporation - RAID Event Monitor Version 8.6.1.1002 *
    Intel Corporation - RAID Monitor Version 8.6.1.1002 *
    Intel(R) Matrix Storage Console Version 8.6.1.1002 *
    Macrovision Corporation - InstallShield (R) Version 10.50 * Macrovision Corporation - Software Manager Version 6, 0 *
    Microsoft (R) Windows Script Host Version 5.7.0.6000 *
    Microsoft - Kbd Stub Version 1.0.9.1 *
    Microsoft Application Error Reporting Version 12.0.6211.1000 *
    Microsoft AutoRoute 2004 Version 11.00.18.1900 *
    Microsoft Clip Organizer Version 11.0.8164 *
    Microsoft Corporation - digital locker assistant Version 1.6.5 *
    Microsoft Corporation - Internet Explorer Version 7.00.6000.16386 *
    Microsoft Corporation - Office Diagnostics Service Version 12.0.6211.1000 *
    Microsoft Corporation - Office Diagnostics Version 12.0.6211.1000 *
    Microsoft Corporation - Office Source Engine Version 12.0.4518.1014 *
    Microsoft Corporation - SelfCert Version 11.0.8164 *
    Microsoft Corporation - Windows Defender Version 1.1.1600.0 *
    Microsoft Corporation - Windows Installer - Unicode Version 4.0.6000.16386 *
    Microsoft Corporation - Windows Version 1.0.0.1 *
    Microsoft Office 2003 Version 11.0.8164 *
    Microsoft Office Document Imaging Version 11.0.8166.2 *
    Microsoft Office InfoPath Version 11.0.8161 *
    Microsoft Office Isolated Converter Environment Version 12.0.6211.1000 *
    Microsoft Office OneNote Version 12.0.6316.5000 *
    Microsoft Office Outlook Version 11.0.8217 *
    Microsoft Office Picture Manager Version 11.0.8161 *
    Microsoft Office Save My Settings/Profile Wizard Version 11.0.8161 *
    Microsoft Open XML Converter Version 12.0.6211.1000 *
    Microsoft Visio Version 11.0 *
    Microsoft® .NET Framework Version 2.0.50727.1434 *
    Microsoft® .NET Framework Version 3.0.4506.648 *
    Microsoft® Works 9 Version 9.07.0613.0 *
    muveeReveal Version 7.0 *
    NOS Microsystems Ltd. - getPlus(R) Helper Version 1.2.0.7 *
    NVIDIA Driver Helper Service, Version 175.78 Version 7.15.11.7578 *
    OsdMaestro Version 1, 0, 0, 5 *
    PC-Doctor, Inc. - Hardware Diagnostic Tools Version 5.1.0.0 *
    PhotoSuite Version 9.4.3.0 *
    Quick Tour *
    Recovery Manager Version 7, 0, 91, 13 *
    Research In Motion Limited - Desktop Tools for RIM Handhelds Version 4.7.0.32 (Release build by unknown) *
    Research In Motion Limited - RIM Handheld Communications Manager Version 4.3.1.15 (Release build by unknown) *
    Shop for HP Supplies Version 2.1.3.0000 *
    SoftThinks - Application CD Creator Version 7, 0, 91, 61 *
    Sonic Solutions - CommonSDK Version 9.0.0.93 *
    Sonic Solutions - CommonSDK Version 9.4.4.1 *
    Sonic Solutions - MediaCapture Version 9.4.3.0 *
    Sun Microsystems, Inc. - Java(TM) Platform SE 6 U7 Version 6.0.70.11 *
    Symantec Core Component Version 1.9.2.84 *
    Symantec Corporation - Firewall Component Version 3.0 *
    Symantec Corporation - LiveUpdate Notice Version 1.5 *
    Symantec Corporation - LiveUpdate Version 3.4.1.234 *
    Symantec Corporation - Norton 360 Version 2.0 *
    Symantec Corporation - Norton Protection Center Version 2008.8.00 *
    Symantec Security Technologies Version 107.0.6.4 *
    WildTangent, Inc. - GameConsole Version 1.0.0.1 *
    WizLink Application Version 1, 0, 0, 1 *

    Did you download the 64 bit version of iTunes? It should download automatically, but it might not.
    If you have the right version of the installer you should have 64 in the name IIRC it is called iTunes64setup.exe.
    This the same as 32 bit iTunes but it includes the 64 bit drivers for burning and the iphone.
    If you got the wrong installer, there is a link to the 64 bit installer on the download page but it is not obvious. The link is in the box lower left under "Windows software"
    http://www.apple.com/itunes/download/

  • UNABLE TO FIND PHOTOSMART SOFTWARE ON COMPUTER WIN VISTA 64 BIT FOR HP 7580

    trying to make settings adjustment for l7580 and unabke to find photosmart software on computer. Help please.

    Hi,
    If you are referring to Photosmart essential software, it has been replaced with HP Creations which can be downloaded from link below.
    http://www.hp.com/global/us/en/consumer/digital_photography/free/software/photo-creations.html
    If the printer is HP Officejet L7580, there is not program as photosmart software for this printer.
    Although I am an HP employee, I am speaking for myself and not for HP.
    --Say "Thanks" by clicking the Kudos Star in the post that helped you.
    --Please mark the post that solves your problem as "Accepted Solution"

  • Does the mini display to vga adapter work with a pc (win 7 64-bit)

    Its not a thunderbolt adapter. its a mini display to vga adapter. my hp ency pc has a mini display port next to the hdmi port.

    First make sure the mini-displayport is firmly seated.  They are a bit "sneaky" in that they look like they are fully in but aren't.
    I assume that windows has something similar to the mac Displays system preferences.  So you need to check that and set if necessary the proper refresh rate and resolution for the projector.
    how do i make it work or is it formated for macs only?
    What's "it"?  The projector shouldn't care where it gets its vga signal from (when using the proper refresh rate and resolution).  The adapter is passive and just converts a digital mini-displayport signal to analog vga to pass over the cable (is the cable ok?).  That leaves your laptop.  I can't speak about it or its video card.  But I have to assume that if it supports mini-displayport it should follow the standards for mini-displayports.

  • Windows Vista 64 bit w/older 2 dual core 3.0ghz Mac Pro with NVIDIA 7300

    I have read a variety of the posts that have appeared here on the use of Windows Vista 64 bits on a Mac Pro. I remain confused, and but want to do this. I have a Mac Pro purchased in the Spring of '07 with dual 3.0Ghz dual core Xeon cpus and 10gb of ram, using the NVIDIA GeForce 7300 GT and running 10.5.1, with multiple drives. I want to run the 64 bit version of Vista Ultimate to use my ram, and to gain the performance this box should offer. It appears that I have three options:
    1. Boot Camp: I don't know if the drivers are available, seems like the new Mac Pro drivers probably would not work, even if I could find them, since I have an older Mac Pro with a pair of the dual core Xeon CPUs. Don't know if there is an alternate source than Apple for the drivers, or a way to get around the problem in boot camp.
    2. Parallels: I do not believe that 64 bit apps are supported by Parallels
    3. Fusion: Their web site says they support Win Vista 64 bit, but it is not clear to me on the web site where the drivers are obtained, or perhaps they are built in to Fusion. Will I get the performance and memory benefits in fusion? Or is the OSX virtual overhead so high that this is a fools errand?
    I do a lot of video editing, and fully 95% of my life is in the Mac world, but I have individuals who send files for editing, and occasionally they require Windows tools, much to my chagrin. I also have a small number of programs that need Windows 64. I occasionally am required to do some development work, and would like to use this machine for that purpose if it can indeed run Win Vista 64bit. I have XP loaded on a more modest box andit is running fine when I need it, which isn't very often.
    Any help, or successful experience in running Windows Ultimate 64 bit on this hardware, utilizing its resources would be greatly appreciated.

    Here are my results after further digging online and from my own experience.
    Here is the procedure:
    1. Check whether your Mac has the 32-bit EFI or 64-bit EFI
    http://www.ihackintosh.com/2009/08/snow-leopard-106-and-64-bit-what-you-need-to- know/
    2. Create a Boot Camp (BC) partition for Windows 7 x64. Resize the partition size using the slider in the BC app. Follow the instruction, insert the Windows 7 disk and reboot.
    3. This will load the PC partition which is FAT formatted for now. Choose the Boot Camp partition on which to install Win 7, but choose in the option to format that partition. It will automatically format it in NTFS. Otherwise, it will not install on that partition.
    Note : A "OEM System Builder" Windows 7 64-bit Professional UPGRADE install without any issues what so ever. The upgrade disk is a full install. Read this for further information:
    http://www.pcworld.com/article/174288/windows7_upgrade_madecheaper.html
    4. Run windows, then insert the Snow Leopard disk. It will tell you your hardware cannot support x64 version. Do the following procedure to manually install the driver:
    http://michael.anastasiou.me/index.php?option=com_content&view=article&id=22%3Aq boot-camp-x64-is-unsupported-on-this-computer-modelq-solution&catid=7%3Ahow-to&l ang=en
    5. Then update Boot camp using Apple Software Update in Windows.
    6. All hardware works fine except the sound. The sound only comes out of the internal speaker, even when headphone or speakers are plugged in the jack. Installing the Realtek High Definition Audio Codecs driver in order to fixe the problem. Shutdown and reboot to make it applicable. Try a second time if it still does not work:
    http://218.210.127.131/downloads/downloadsCheck.aspx?Langid=1&PNid=14&PFid=24&Le vel=4&Conn=3&DownTypeID=3&GetDown=false
    That's it.

Maybe you are looking for

  • XMLSearch / case in-sensitive search in a text node value with XPATH

    Hi everyone, I was aggregating some XML files and queries for a search engine. It is pretty easy with coldfusion XML functions BUT .... I was looking around XMLSearch to do a simple text search into nodes and I am stuck with it. with something like t

  • Php curl connection & mysql connection from netbeans (jdbc) problem

    I set up a LAMP stack on my laptop for development of TYPO3 a cms. Everything is cushty but two issues remain where I'm at my wits end. In netbeans I cannot connect to the mysql database using the jdbc driver and specifying the localhost. My php appl

  • Receiving M:N Results when connecting to a SAP BW Query

    Hi All, I'm working in SAP BW 7.0 and BO I created a query which is perfectly running. I have already set for external connection an when I connect to a UNIVERSE, BO generates a correct Universe. The Univer contais just two InfoObjects. Each InfoObje

  • Custom template available across multiple site collections

    I have created a custom site template which I need to be available across multiple site collections. Is there a global area where I can put the .wsp file so that I can use it within any site collection. I also have a custom document library which I n

  • PKGBUILD parser in Python.

    I've wrote PKGBUILD parser in Python and thought someone else might also want to use it. Here's a little example of how it works # python Python 2.5.2 (r252:60911, Jul 8 2008, 21:21:10) [GCC 4.3.1 20080626 (prerelease)] on linux2 Type "help", "copyri