Music skips during slideshow

Hi,
When I play a slideshow from within iphoto8 the music skips every 10-15 seconds. If I play the same selection in itunes it does not skip. I've tried this with many songs in the off chance that it was the one song but it does it with every song I tried. Apple just replaced my power supply thinking it was defective but it did not cure the problem. I have plenty of space on my hard drive if that matters. Any one else have this problem?

>> Did you tried an other USB stick?<< - Yes, several
>>Perhapst you can shorten the fade in / out of the pictures a little bit.<< - I will try that next!
>>small buffer in the Vizio << I need it to work for all large flat screen TV's because it is going to be marketed as a big screen slideshow
The thing is that if I just play the soundtrack on the TV, it works fine with no skipping. I am wondering if my images might be too large. They are all 300 DPI JPG's and about 5,000 pixels at about 10 megabytes, and there are 276 of them for playing the video for about 40 minutes.
I could convert the mp3 to mp4a and add that format as the soundtrack.
Thanks for all of your input,
Allen

Similar Messages

  • IDVD music skips during slideshows

    hey guys
    I'm on leopard and iLife 09 (also iLife 07 on another mac but has same issue)
    I've read some articles that tell me the reason for music skipping on iDVD is it will only handle 99 chapters.
    Can someone advise if this problem would still occur if the slideshow was made using different software OR how to get around the music skipping issue.
    I am aware you can export a slideshow from iPhoto but the quality is not the same as in iDVD and iMovie simply takes far to long to create a slideshow.
    Thanks for your help!
    Sammy

    The same problem has been bugging me too. Seems 99 IS the limit. If you want each slide to show for say 3 seconds then you need a piece of music that last 297 seconds for those 99 images. If your music last say 300 secs (5 minutes) the I use GarageBand and start to fade it from say 290secs and split it at 297secs and delete the last bit. Then I add another track that last for the remainder, so if you have 150 images in total you need something that will last for 150 x 3 secs and fade again if necessary. I think the trick is to multiply 99 by the length of time you want each image to show and then import music pieces into GarageBand.
    You are using 5 minutes music for 150 images. That’s only 2 secs per image! Are you stuck with that time limit?
    In your case, with 150 images at 4 seconds each you’d need 10 minutes in total, composed of 99x4 secs (6mins 36secs) and another piece that lasts 3mins 24secs or thereabouts, or that you fade out after that time. Then when your pieces of music are ready, save them across to iTunes (share) and import from there. Or just play the same piece of music a second time. Not ideal, but it’s the only solution I’ve been able to come up with so far.

  • Music skipping during DVD slideshow

    I have been buring the same slideshow for weeks - it works fine on all of my tv's computers etc - when we play it back at my clients office the music drops out during each slide - it sounds like skipping -what did i miss?

    You missed telling us on what device are playing it back on at your client's office.
    If works everyplace else, the likely issue is the player there.

  • Music skips in slideshow

    Combined 6 songs in Garageband. Saved so iLife can recognize. Added the music to slideshow w/ slides to fit the music. There are 74 photos with over 17 minutes of music. First part goes fine but about 1/2 way thru 5th song, it reverts to the first song and the slides continue on as they should. Any initial suggestions?
    ~bruce.

    So iPhoto gets to one song in the single, combined music track and is kicked out back to the beginning, right. What happens if you get rid of that 5th song and use another one? Is that track DRM protected, i.e. purchased from the iTunes store?
    Can you play that audio track thru to the end with QT Player?
    OT

  • IDVD music skips for slideshow

    I have create an idvd slideshow for my mother 90th birthday. I have selected 8 songs. When I play the slideshow from beginning to end everything works great....then I burn the DVD and play it and some of the songs skip. I redo the DVD and it skips in different places. What can I do to fix this? Susan
    I also have the issue of not being able to burn a DVD-R ...it seems to only want to burn on a DVD-RW. Is this normal? There are 426 pictures and 8 songs. My computer has lots of room.

    Btw, if your objective is to have all images on a single shideshow then I'd recommend an alternate app for the slideshow itself prior to using iDvd. For example; iMovie will work with stills as a single QT file and hence no limits on the number of images (up to the capacity of the dvd you are using at the time) with excellent audio results also.
    You may also wish to consider these alternate apps which specialize in slideshow presentation which you can then burn through iDvd.
    http://www.lqgraphics.com/software/phototomovie.php
    http://boinx.com/fotomagico/overview/
    http://boinx.com/photopresenter/overview/
    http://www.boinx.com/fotomagico/roxio/
    http://www.apple.com/ilife/tutorials/#iphoto
    Hope these helps but if not just come on back. Good luck!

  • My new Ipad2 doesn't display any pictures during slideshow, although the music plays fine.

    I recently received an ipad 2 as a birthday gift from my wife, just before we hopped across the Atlantic to Europe (we wanted to make sure it worked well).  Now that we're here and I am fiddling with it more, I have found that when I play the slideshow feature either from the photos app or using the little flower icon on the lock screen, I cannot actually see any pictures.  The selected music plays during the slideshow, but there are no images displayed.
    How can I correct this problem?  I'm a little concerned about our location, because if I have to return it for warranty, I'm going to be challenged due to my location.  I'll be here for months, so I can't just wait until I go back...

    Verified - all photos is checked.  I tried a few other iterations without any positive results.  In all cases, the screen fades to black and displays nothing.
    Upon tapping the screen, I can see that it has progressed through several photos during the time the screen is dark.  This is interesting...indicating that the program is running, but without a proper display.
    This is an important feature for me. 

  • Can't save "Play music during slideshow" setting in iPhoto 6

    Hi,
    I just bought and installed iPhoto 6 today as an upgrade to iPhoto 4. I've discovered that I'm unable to save the "Play music during slideshow" setting in the dialog which appears when I click the "Play" button from the thumbnail screen to play a slideshow. If I uncheck this checkbox and then click on the "Save Settings" button, the next time I play a slideshow, the music starts up again. The most particularly annoying thing about this problem is that I'm trying to create a slideshow that plays no music, and I have to continually uncheck the "Play music during slideshow" checkbox each time I play the slideshow. Has anyone else run into this problem, and is there a solution or workaround for it?
    Thanks,
    Ken

    Hi,
    I think I've figured out what's going on here, but I don't know how to fix it. While I was playing around with the items in the "Play" dialog that appears when you initiate a slideshow, I discovered that if I uncheck the "Play music during slideshow" and then change the selection in the tree of folders underneath the checkbox, that the checkbox becomes selected. This would normally be the considerate thing to do, since if the user were making a selection in that tree, it would be rather "rude" in a software sense to not check the checkbox automatically. Unfortunately, in this case, the logic doesn't seem to be looking at the Preferences flag which (correctly, I think) is remembering that I don't want music to be played. So what I think is happening is when this dialog is first instantiated, the checkbox setting is remembered correctly. However, what happens next is that the saved selection in the folder tree is then restored, which then triggers the "a tree selection was just made, so let's check the checkbox" event. This is why if you've saved the "don't play music" setting, the checkbox is initially cleared, and then when the tree selection is set, the checkbox becomes checked. If I save the settings with the checkbox checked, the checkbox is set from the instant the dialog appears. So assuming that this is what's happening, is it possible to fix this by editing the NIB file using the Developer Tools? Or is this logic embedded in the compiled code?
    Any suggestions would be appreciated.
    Ken

  • Just upgraded to OSx Maverics and Iphoto 9.5 - no music during slideshow ?

    Just upgraded to OSx Maverics and Iphoto 9.5 and now have no music when playing slideshows (using custom or default). All libraries worked fine before upgrade (using Lion). Any ideas?

    In iTunes go File -> Library -> Organise Library -> Reorganise Library.
    Then quit and restart iPhoto.
    Credit to user keysandfood who figured that one out.

  • Airtunes - music cuts or skips during play

    Just installed the upgrade to 7,32 (6) and my music skips when playing on remote speakers (perhaps on Mac too, but haven't tried that yet. Really random skips - some songs only, sometimes often, sometimes not.
    Library is on LaCie external drive. Set-up worked fine with previous versions.
    Thanks

    I also have this problem. It is infrequent, and solving it is inconsistent. sometimes simply restarting itunes is enough, sometimes a computer restart, router restart or force quitting itunes is required to stop the skipping.
    It's making my wireless music listening experience less than enjoyable.
    I am streaming my music to a airport express connected to an apple ipod hi-fi from a lacie firewire 400 7200rpm hard drive. through itunes obviously. and yes, i have set my buffer to large.
    thank you for any suggestions you may have for me, ben

  • How can I stop music from skipping during play

    I do not like iCloud.  How can I convert back to the previous version?  If not available, then how can I stop songs from skipping during play?  (Only started happening when iCloud installed).

    Hi,
    Exits for T/C PA40 area:
    Exit Name           Description
    HRPC0001            HR: PC download authorization
    HRRPAI01            User exit for FB HR_ENTRY_DATE and HR_LEAVING_DATE
    PARA0001            Enhancement for Determining the Number of Periods
    PARA0002            Enhancement for Calculating Annual Salary; IT0008,14,15
    PBAS0001            PA: Pers.Admin./Recruitment: Default values and checks
    PBAS0002            PA: Enhancements for Personnel Administration - Menu
    PBASRP01            PA: User exit distributed reporting
    HRPBAS01            User exit for personnel number validation
    I think exit PARA0002 will work for this requirement.
    for confirmation put BREAK-POINT in the include and do the action with PA40 t/c, if cudrsor goes to the BREAK-POINT stmt, the logic to write si
    if screen-name eq 'aaaa'. (for exact names can go for f1 help>tech attribts>)
    if filed-name eq (for example:) anzhl
    if anzhl is initial..(u can go for writing all the fields with AND operator)
    message: e
    endif.
    endif.
    endif.
    I hope just idea will help you.
    Regards,
    Thrilleswar

  • Music skips before each and every slide

    Hi there. I have been burning a number of slideshows with iDVD and putting playlists from iTunes to them. No matter which DVD player I play them on at each transition (the split second before) the music skips a beat or two. I'm sure this is similar to the problem discussed yesterday in a different post, but that post talked about the skip happening once at the 8 min 58 sec. mark. This is happening throughout. These are long slideshows - so that's a different issue though. Also, to help the discussion go farther - faster - a few other notes:
    The DVD plays the WORST on my computer.
    I am using Apple and Verbatim DVD's.
    I have tried all different music from iTunes.
    The skipping also happens on the menu page.
    I am NOT an iDVD expert. These 10 or dvd's are my first. I am dragging an album into iDVD and editing it there.
    Any suggestions as to what I might be doing wrong to be getting this continual skip?

    Yes, today I am using Verbatim DVD-R with up to 16x speed.
    iDVD may be recording "too fast." Burning the disk image will give you control over that.
    How do I create a Disk image?
    Sorry...
    Suggest you create a disc image and then burn the DVD. File/Save As Disc Image...
    http://docs.info.apple.com/article.html?artnum=164927
    This will isolate any encoding/burning issues you may encounter. Once the disc image is created, double-click the .img and burn the virtual disc that should appear on your desktop, using Toast to burn the DVD. Disk Utility to burn the .img file. Usually, you can select a burning speed in Disk Utility.
    There are variations to this process based on which OS X you are using...
    Open Disk Utility (in Utilities folder in Applications folder), click on the virtual disc (maybe the .img) in the left-hand window. Click the Burn icon. A new window should drop down and your SuperDrive tray will open after clicking the Burn icon. Insert a recordable DVD. (Verbatim DVD-R preferred by me.) Click the Close button. Wait. Select a burn speed. If you hold your mouse cursor over the pop-up it says: "Select a slower speed to work around burn failures," so select 4x or slower for best results. Then click the Burn button.
    -->If the virtual disk selection won't allow you to click the Burn icon, use the .img file instead. This may have changed in 10.3.9 and did change in Tiger.
    Also, you can use DVD Player to play the virtual disk to check your iDVD project before burning to DVD. Launch DVD Player. File/Open VIDEO_TS (Open DVD Media... in Player 4.6). Find the VIDEO_TS folder and open that. (The audio folder is for DVD-Audio disks.)
    http://docs.info.apple.com/article.html?artnum=93006

  • Burned DVD stops or music skips at 100th chapter

    I am creating a slideshow with music in iDVD. When playing the burned dvd the music skips or the dvd stops at the 100th picture. Any fix for the problem? I noticed that iDVD automatically assigns each picture its own chapter so it could be the 100th chapter that causes the problem. If so, is there any way to have more than 1 picture per chapter?
    Thanks for your help!

    The 99 photos was because, as the original poster indicates, each photo is a chapter and the Video DVD standard (nothing to do with Apple, but the industry standard) is 99 chapters max. These days many players will play past 99 chapters, but many others, especially older ones, the strictly conform to the DVD standard balk when there are more than 99 chapters.
    So while iDVD will now allow slide shows past 99 photos, if you want your DVD to be compatible with the most set top players, you are better off limiting your slideshow to no more than 99 photos. If you want more, then you want to create your slideshow manually in iPhoto or iMovie and place your own chapter markers keeping the number of chapters under 100.
    Patrick

  • Audio skipping in slideshow

    Hi Guys,
    Major panic on here.
    Pal DVD
    I have just created a wedding slideshow dvd with four slideshows within.
    To each slideshow I have added music which is fitted to the slideshow duration. All slideshows have a transition (the same for each show)Gradient wipe 03:00.
    Everything is great except that the audio keeps skipping or missing regularly. I have used wav format and have transcode settings;
    Copy of pal dv High Quality 8mb CBR 1 pass
    Aud format PCM, Stereo, 16 bit, 48 khz.
    As I am fairly new to encore I do not know whether these are the right settings for a PAL DVD and would welcome some helpful advice to solve this problem.
    Using Encore DVD 2
    Thanks in advance to all those that take the time to reply.
    David.

    Hi all,
    I find the two replies amazing., especially as Adobe promote Encore as the main DVD creator with a slideshow function.
    For those that are interested, I remade the slideshow in Encore 2 omitting the transitions and also the fit slideshow to audio feature.
    Burnt a fresh copy and ran it on the TV. The skipping was still there but it was now obvious where the problem lies.
    The music skip occurs immediately prior to a picture change, just where a transition would commence (if you had one set).
    So lets hope the smart boys at Adobe have enough now to isolate this problem once and for all, considering that it comes in a package costing $800.
    David.

  • When using the player the music skips like an old LP used to do once it was scratched.

    iTunes performance has always been generally sluggish on my computer (Windows 7) however my spotlite issue is when during playback the music skips / echos like the old LP's used to do once one was scratched.  ( I use a 2TB external drive for iTunes ).

    Hi jaxxzun,
    If you are having unusual audio playback issues in iTunes on your Windows machine, you may find the troubleshooting steps in the following article helpful:
    iTunes and QuickTime for Windows: Audio does not play or plays incorrectly
    http://support.apple.com/kb/ts1362
    Regards,
    - Brenden

  • How to fix music skipping on iTunes?

    I am listening to music on iTunes and it keeps skipping during songs. How can I fix this? I have the new version of iTunes and this just started happening today.

    Hey joe sammy,
    Thanks for the question. After reviewing your post, it sounds like you want to download past purchases. I would recommend that you read this article, it may be able to help you resolve or isolate the issue.
    Download past purchases
    Thanks for using Apple Support Communities.
    Have a nice day,
    Mario

Maybe you are looking for