Music Sounds Like the Chip Munks singing

I have an a6537c Pavilion and the music sounds like junk. Sounds like the Chip Munks. What can I do?

Well... sounds like you have an audio enhancement enabled. There are a few places where they can be set. Check the following places to turn them off:
Windows Media Player 11
1. Play music
2. Right-click menu bar.
3. From the menu that opens, select View, Enhancements, and Play Speed.
4. Adjust the Play Slider to 1.0
Windows Sound (Realtek codec)
1. Right click the volume icon next to the time in the taskbar.
2. Select Sounds.
3. Select the Playback tab.
4. Select your default playback device denoted by a green circle with a check (probably Speakers).
5. With the playback device selected, click the Properties button.
6. Click the Enhancements tab.
7. Select Disable all sound effects.
8. Click OK.
Hope this helps.
... an HP employee expressing his own opinion.
Please post rather than send me a Message. It's good for the community and I might not be able to get back quickly. - Thank you.

Similar Messages

I just typed in "top 40 hits in the search column in itunes, and the songs sound completely different! It doesn't even sound like the artist is singing the songs! What's up with that??

I just searched for "top 40 hits on itunes and the songs that came up don't sound remotely like the ones i hear on the radio(not remixes) just the regular song, so what's up with that?

Ramsey66 wrote:
I just searched for "top 40 hits on itunes and the songs that came up don't sound remotely like the ones i hear on the radio(not remixes) just the regular song, so what's up with that?
They aren't the ones you hear on the radio.
They are the same songs remade by some unknown label to make money.

When I play my Ipod shuffle 3rd gen there's a moment when I start hearing interference until it stops playing, when I turn it off and on again it starts playing from the first song all over again, and once it sounded like the music was slowing down.

My Ipod shuffle 3rd gen starts playing songs with some kind of interference until it stops playing, when I turn it off and on again it starts playing from the first song all over again, and once it sounded like the music was slowing down. First I thought it was the earphones, but I exchanged them for newer ones and so far its the same

You may want to do a Restore on the shuffle in iTunes. The Restore button is on the shuffle's Summary screen in iTunes. This will erase the shuffle, re-install its software, and set it to default settings. If it's a software or data corruption glitch, the Restore should fix it. After the Restore, reload or resync your songs, and try it again. As a test, you may want to initially select a small number of songs to put back on the shuffle.

How do I adjust sound quality in itunes - sounds like the chipmonks in a tunnel

I'm trying to listen to songs I purchased on itunes from my iPad/iPhone on my everyday PC - Compaq. Never had a problem before! Now all my music sounds like it's in a tunnel and Alvin of the Chipmonks is the lead singer in Alice in Chains !! HELP I'VE TRIED EVERYTHING !! Thank you

You seem to be asking two separate questions here.
1) Interfaces
Interfaces start at around $30 and go into the thousands depoending on what you want to do, You need to define your needs first, then your budget
Some example interfaces:
http://www.thehangtime.com/gb/gbfaq2.html#interfaces
2) How do I Mix and Master
You'll need to read some books if you have no idea how to mix and/or Master.
Mixing is making everythnig sound good together, and I have no idea how I could explain that other than to say "you change the levels of each track and add effects as desired, until you get thesound you want.
Mastering is even harder to define, you'll really need to do some research (even online. There is PLENTY of info on the web).
--HangTime [Will Compute for Food] B-)>

No bass-music sounds like a tin can. Cannot adjust sound

I just got a new Ipod. My music sounds terrible. No bass-the music sounds like a tin can and I cannot adjust the sound. HELP

I'm having this problem too. Additionally, sometimes the tinny music comes through the external speaker as well as the headphones. When the sound is 'off', the volume cannot be adjusted.
My nano is more or less possessed, actually. The artwork for my music is absolutely bizarre - not just wrong and mixed with another album cover that I actually have, but completely random artwork.
I can handle the strange and frequently amusing artwork - the inability to adjust my sound and inability to turn off the external speaker is killing me.
The apple store recommended restoring the nano through itunes, which seemed to help the artwork issue, but the speaker/earbud issue just seemed to get progressively worse.
Sorry for the lack of answers - I would love, love, love to fix this and have a properly functioning nano (my classic has been perfect for YEARS). Still, sometimes it seems to help to commiserate.

Nano sounds terrible, music sounds like it's in a tunnel!

I loaded my entire I-Tunes library on my new nano, but the music sounds like it is in a tunnel. I have tried 4 different pairs of headphones and completely wiped it out and RE-loaded the library again, with the same results. I tried to change the EQ option, but nothing has helped. Any suggestions or should I go back to the Apple store to get a new one?

had the same problem...seems alot of people are...the headphones may appear to be all the way in but they aren't. i shoved them in and they work fine now

My recorded signal is not sounding like the signal I am monitoring.

My recorded guitar is not sounding like the signal I am monitoring. It sounds very good when recording, but lacks energy and detail when it is played back. If I am using input/direct monitoring am I also bypassing the Analog to Digital converters? Could this explain the difference in sound quality?
Would it be the same to monitor a signal directly out of the sound card and to monitor "through" Logic?
My sound card is a Presouns Firepod.

Mastergod wrote:
My recorded guitar is not sounding like the signal I am monitoring. It sounds very good when recording, but lacks energy and detail when it is played back. If I am using input/direct monitoring am I also bypassing the Analog to Digital converters? Could this explain the difference in sound quality?
Yes.
Would it be the same to monitor a signal directly out of the sound card and to monitor "through" Logic?
No.
My sound card is a Presouns Firepod.
Consult the manual of that device, to see if you can learn from where in the signal chain it gets your direct monitoring from --- PRE conversion or POST conversion... My bet is that it is pre conversion.
Cheers

HD videos from Sony NEX-3 sound like the Chipmunks

My Sony NEX-3 720p MP4 videos sound like the Chipmunks. Video frame rate appears ok but the sound is way too fast. The files play nicely e.g. in Preview though.
iMovie imports the files nicely, using the internal SD reader in my iMac. However, the sound is out of sync in the imported files. From the sound of it, it seems the audio runs at least at 2x the speed.
Currently I use Handbrake for converting the camera clips into 25 fps m4v and then importing these into iMovie but it is a pain.

Can you tell me how you imported the video from your NEX-3 to iMovie? When I try, the camera automatically opens iPhoto and imports it there. If I open iMovie, all of the selctions are grayed-out so I can't import them. I've tried getting the video straight from the camera but can't seem to do that either. Can you help?

I occasionally get a call and at the end of the call, it sounds like the camera is taking a picture. Anyone else ever experience this

I occasionally get a call and at the end of the call, it sounds like the camera is taking a picture. Anyone else ever experience this?

No, but when the other party hangs up first I have heard the click of the disconnect.

I'm using GarageBand 10.0.1. Do the built-in drum tracks only come in mono format, or is it possible to make them true stereo (i.e. Left and Right channels outputing different signals, to sound like the kit has been panned across the stereo field)?

I'm using GarageBand 10.0.1. Do the built-in drum tracks only come in mono format, or is it possible to make them true stereo (i.e. Left and Right channels putting out different signals, to sound like the kit has been panned across the stereo field)?

All the Drum Kits available for GarageBand are mixed in stereo.
Logic provides the same 18 Drum Kits also as "Producer Kits", which are multi-track outputs,. Each Drum Kit Piece (Kick, Snare, HH, etc) and also room mice and overheads are routed to individual channel strips.
Here is a screenshot of one Drum Kit in Logic Pro X with individual Channels Strips. Each Channel Strip can be loaded with individual effects (compressor) and adduced with individual sends, etc.
What that means is that all the Drummers are professionally recorded and sampled with individual mics. The Stereo Drums Kits are just "stereo mix-downs" for easier handling and less CPU demand. I explain all the details about the Drummer ecosystem in my graphically enhanced manual "GarageBand X - How it Works"
Hope that helps
Edgar Rothermich
http://DingDingMusic.com/Manuals/
'I may receive some form of compensation, financial or otherwise, from my recommendation or link.'

How do I change the way things sound like the bas, troule

How do I change the way things sound like the bass, trouble,etc

What is your operating system?
****Please click on Accept As Solution if a suggestion solves your problem. It helps others facing the same problem to find a solution easily****
2015 Microsoft MVP - Windows Experience Consumer

When I turn on firefox the sound of an alarm begins and keeps going. I did not download or add or open anything. A sound like the old pacman game initiates the never ending alarm. It does not occur with safari and ends if I close firefox.

When I turn on firefox the sound of an alarm begins and keeps going. I did not download or add or open anything. A sound like the old pacman game initiates the never ending alarm. It does not occur with safari and ends if I close firefox.
== This happened ==
Not sure how often
== I opened firefox

dont have google open in a tab!!!!!!!!
(if you are one who opens FF and it opens google then immediately open another tab to go to a site then just visit the site from the page that opened without opening a new tab)
OR
if you have cool preview then disable that
(the sound is for the celebration of 30 years of pacman and you can play the game on google's homepage)

TS3938 The message "PowerPC applications are no longer supported" sounds like the end, not an interruption. Nevertheless the gaming world could use a wake up call. Is this really a solution?

The message "PowerPC applications are no longer supported" sounds like the end, not an interruption. Nevertheless the gaming world could use a wake up call. Is this really a solution?

Scot Lee wrote:
The message "PowerPC applications are no longer supported" sounds like the end, not an interruption. Nevertheless the gaming world could use a wake up call. Is this really a solution?
Yes Rosetta has been gone for over two years. You can always search here for how Michael Lax's instructions on how to run SL Server in a virtul environment, but I don't think it is too kind to gamers.
Advice? Buy an old Mac that runs PPC software.
Cheers
Pete

Sounds like the camera

Whenever I turn the home screen on or off by pressing the on/off switch, I get a sound like the camera is taking a picture.
I have Lookout, which has an option to take the picture of anyone that enters the wrong password x number of times, but I have that disabled.
Does anyone know if this is a "feature" and if I can get rid of the sound? It's getting kind of annoying.

Then i would try Running the phone in Safe Mode and see what it does if the issue stops then you Know there is a 3rd party App that is possibly causing the issue at then you would want to remove each app one by one till the issue goes away). But if the issue remains then i would Look at Running a System Cache, or Doing a Factory Reset.. And as i mentioned in my earlier post holding down the power + lower Volume down will snap a screen shot but continuing to hold will power off the Razr it's referred to as a Power Cycle same thing as you use to do when pulling the Battery.. When i do a power Cycle i hold the button in for at least 30 sec...

Desktop has a noise that sounds like the fan

I turned on my IMAC desktop and there is a noise that sounds like the fan. The computer is very quiet till now. What should I do?

LexSchellings wrote:
Yes, I know, but it works as always, there is nothing to make it better; cf Perian.
iStat Pro does not quite work "as always" with newer systems.
For one thing, it may report inaccurate temperatures (& possibly fan speeds), depending on the Mac model it is running on. (For instance, on my system, it tells me the ambient temperature is around 54° F in a room that is actually about 77°.)
The problem is basically that iStat Pro gets temperature & fan speed info by querying the SMC subsystem. Apple has apparently changed the query/response protocols or the SMC hardware itself, so this no longer works as the utility expects.
And Banjo is not as "safe" and digs too deep with core kexts.
Banjo is the new name for the same company that developed iStat Pro & the original & newer iStat Menus programs. My guess is that the latest version of iStat Menus is just as safe to use as the earlier ones.
However, I won't use it for the same reason I won't use MenuMeters: both rely on MenuCracker, a hack to work around Apple's restriction of menu extras to ones Apple develops & distributes as part of the OS itself. Developers are specifically told to use 'Status Items' for their menu bar add-ons, which offer some but not all of the same functionality as menu extras, & do not risk destabilizing the OS or compromising its security.

Music Sounds Like the Chip Munks singing

Similar Messages

Maybe you are looking for