Music starts playing at call end and on Bluetooth connection.

Can anyone offer any tips to the battery draining problem of my Iphone 5 playing music all by it's self. This mainly happens when its connected to the cars Bluetooth and you dont hear the music or when you end a call. I've spoken to my fellow workers who have Iphone and a couple have the same problem. Any ideas or fixes would be great.

Thanks Meg for your reply.
It could be that both cable are bad. But, anyway, you would not expect any of these manifestations, even with a bad cable. I had bad cable for my 4s, and never saw such a thing! 
I contacted by chat the support of Apple.  They told me that this behavior could be a software problem and recommended me to do a full recover of my iphone. That meant, putting in at the factory conditions and recup all the data from the backup.  I did that, and the behavior did not change.  The backup was made with the data of my PC, not icloud.  Tomorrow will try with icloud and check if that will work. 

Similar Messages

  • Music starts when phone call ends

    Everytime I end a phone call music starts to play from my phone.  Even if I had no music playing to begin with.  How do I get this to stop?

    If you are using a headset, it's possible you are ending the call and delivering a single click to the headset "call" button at the same time.  That single, short click starts the music.
    If that is not the case, try rebooting the phone:  Hold the power home buttons down at the same time until you see the apple logo. Ignore the "slide to shut down" message.

  • At night, as soon as I plug my iphone to be recharged, my iphone starts behaving abnormaly.  It is like somebody has taken control of it.  I see the screens moving, music starts playing and then stopping, etc.

    At night, as soon as I plug my iphone to be recharged, my iphone starts behaving anomaly.  It is like somebody has taken control of it.  I see the screens moving, music starts playing and then stopping, etc.  I have noticed that several nights.  What I do is in Settings is to change  into Plane Mode, thinking that, may be if I do that, somebody that has taking control of it will not be able to download data.  Yesterday night, I was awakened by an alarm, whose setting I did not changed. When I looked over, the alarm screen changed to Settings and the Plane Mode changed alone in front of my eyes, from on to off.
    I have not observed such a situation during the day. Only when I plug the cable.
    I suspected that may be there is no Trojan installed. May be the cable, which is a spare cable, has been modified by a hacker, and it has electronics installed in the connector.  But tested with the original cable, and the behavior was the same, as described above.

    Thanks Meg for your reply.
    It could be that both cable are bad. But, anyway, you would not expect any of these manifestations, even with a bad cable. I had bad cable for my 4s, and never saw such a thing! 
    I contacted by chat the support of Apple.  They told me that this behavior could be a software problem and recommended me to do a full recover of my iphone. That meant, putting in at the factory conditions and recup all the data from the backup.  I did that, and the behavior did not change.  The backup was made with the data of my PC, not icloud.  Tomorrow will try with icloud and check if that will work. 

  • I-tunes keeps on starting spontaneously and music starts playing. How do I prevent this on my Imac.?

    I-tunes keeps on starting spontaneously and music starts playing. Can anyone help me to solve this ?
    Jacques

    I did restart. Didn't do a rest. Is the rest back to factory settings? Last time I did this, I lost a lot of data. I'm using the Apple headphones that came with my phone. Is there a way to reset without jeopardizing data saved?

  • Random, unknown music starts playing

    OK, I know this is gonna sound weird, but here's what just happened. I was sitting here with a friend talking. My MBP screensaver starts up after 15 minutes. The screensaver is Arabesque. After about another 10 minutes or so (not sure exactly) the screen goes black and music starts playing. I have no idea what music it was, but it appeared to be some sort of long drum beat loop. It's not anything that is in my iTunes Library. Very odd, this has never happened before on any of my Macs. I touch the trackpad to come out of screen saver. I look at the dock, no open apps at all, just a dot by the Finder. Music still playing. I open iTunes and play a song. Song plays, but same music plays as well. Looked at all the options in System Prefs, but nothing out of the ordinary. Command-option-escape, only the finder is open. I sleep the MBP, music stops. As soon as I wake it, music starts back up. Finally, I had to restart to get rid of it.
    ANY IDEA of what the heck happened?

    Who has had access to your computer? It sounds like an "easter egg" to me. The big question is "did the music start again the next time your screensaver was active for 10 Min?" Or was it just a one time thing? Look in your startup items list for any suspicious items.

  • Difference between Release call, End and Termination node in ICM

    Hi all,
    Can anyone let me know the clear difference between  Release call, End and Termination node in ICM and in which situations we should use these nodes.
    Thanks.
    Regards
    Deepak

    Check this, hope will be helpful.
    http://www.cisco.com/en/US/docs/voice_ip_comm/cust_contact/contact_center/ipcc_enterprise/ipccenterprise7_0/user/guide/ipce70sg.pdf
    Sent from Cisco Technical Support iPhone App

  • HT204387 can you listen to music with your ipod touch 4g and a bluetooth handsfree device

    can you listen to music with your ipod touch 4g and a bluetooth handsfree device

    Yes if the BT device supports the profiles supported by the iPod. See:
    iOS: Supported Bluetooth profiles
    The A2DP provide is used with speaker and headphones
    The Hands Free profiles (HFP) is typically used with headset (headphones and mic).

  • (Lync 2013) Lync Web App: Call ended because of network connectivity issues

    I'm having a very strange problem with Lync Web App. When I try to join a meeting, it works in the following conditions:
    - With the Lync 2013 windows client: always (internal network, external network)
    - Lync Web App:  Works in internal network. When I'm on an external network, I'm able to join a meeting, but when Lync Web App tries to establish the call, it ends with the error: "Call ended because of network connectivity issues". 
    On the other hand, IM works with Lync Web App (internal/external network). But all the other features (presentation, audio call, video call) are not working.
    Did anyone experience such an issue ?
    Thanks,
    Antonio

    Hi,
    Since the issue only happen on Lync web app that was handled by reverse proxy. The issue maybe related to RP configuration. Please refer to one of the following links to check if the RP configuration are correct.
    How to Configure ForeFront TMG 2010 as Reverse Proxy for Lync Server 2010
    http://social.technet.microsoft.com/wiki/contents/articles/9807.how-to-configure-forefront-tmg-2010-as-reverse-proxy-for-lync-server-2010.aspx
    Using IIS ARR as a Reverse Proxy for Lync Server 2013
    http://blogs.technet.com/b/nexthop/archive/2013/02/19/using-iis-arr-as-a-reverse-proxy-for-lync-server-2013.aspx
    Here is a similar case for your reference:
    http://social.technet.microsoft.com/Forums/en-US/lyncconferencing/thread/e5d8d247-4646-4e2a-b6f0-e0fd8b3a5ace
    If the issue persists, please try to collect report for further troubleshooting.
    http://www.microsoft.com/en-us/download/details.aspx?id=35453
    Kent Huang
    TechNet Community Support

  • After installing IOS 6, my iphone started to close applications alone and has internet connection instability Wi-fi

    After installing IOS 6, my iphone started to close applications alone and has internet connection instability Wi-fi

    please try this.
    airplane mode on + wifi
    You will get very good Internet connection.
    This is bug of iOS 8. I already reported this to Apple to solve this problem ASAP.

  • After Install IOS 8 and 8.0.2, the Ipad audio was distorted, and the bluetooth connection to audio speaker have wheezing.

    After Install IOS 8 and 8.0.2, the Ipad audio was distorted, and the bluetooth connection to audio speaker have wheezing.

    I ALSO just updated my brand new iphone 6 to 8.0.2, and I ALSO had my cellular service BRICKED.
    All I get on the signal meter is Verizon 1x.  Every so often 3G would popup and you could send a text (no calls though) but it's gone in seconds. So  I can't send texts or make phone calls.
    This phone worked immediately before the update and stopped working immediately after the update.
    My neighbor has a iphone 5S. He updated to 8.0.2 lat week and had no problems UNTIL just this morning, when his phone stopped working - no cellular voice or data. He downgraded back to ios 8.0 but his cellular service never came back.
    Called verizon - was told there were no service outages and then I got transferred to tech team.
    Tech team had do all the Apple troubleshooting steps but nothing more. So they said "take it back."
    So this BRAND NEW iPhone 6 phone is BRICKED because of iOS 8.0.2.
    Thanks Apple!

  • I have installed the new iOS 5 on my Iphone 3GS and my bluetooth connection doesn't work anymore. Does anybody have a solution?

    I have installed the new iOS 5 on my Iphone 3GS and my bluetooth connection for my Philips bluetooth headset doesn't work anymore. Does anybody have a solution?
    I have checked the headset on another Iphone with iOS 4 and it works well.
    Thanks for your help!
    Pierre (from Paris - France)

    Bonjour Pierre,
    there seems to be a bug in iOS5 with regards to Bluetooth. THere are a lot of threads in here on this. We're all waiting for Apple to fix this...

  • How iPad and iPhone Bluetooth connect?

    How iPad and iPhone Bluetooth connect?It does't work.I try 36 times.help me.

    If you trying to transfer documents via bluetooth between the iPad and iPhone then you can't as it's not supported - bluetooth on the iPad is aimed at devices such as headphones and keyboards. A full list of the supported bluetooth profiles is on this page http://support.apple.com/kb/HT3647

  • After updating my MACbook pro music started playing and I can't get it to stop

    I need help getting the music to stop playing on my macbookpro. It started playing after I updated

    Try quitting all open applications, if it is still playing click GO in the menu bar and select Utilities, or SHIFT+COMMAND+U from the Finder window, then open Activity Monitor .app make sure it says All processes in the drop down and click the column says CPU see what is running, it should be using the most cpu if everything else is closed and be at or near the top of the list. Highlight it and click the quit process.

  • When rendering with Adobe Media Encoder, the sound only starts playing at 1 minute and 20 seconds

    So I have this problem: I have a video which is an hour long and when I try to render it via AME the result will have the audio of the video starting at around the 1 minute 20 mark. I render to the YouTube 1080p preset.
    What I have tried to fix this is:
    - use .wav instead of .mp3 (didn't work)
    - use After Effects itself to render the video (this worked)
    - change the video start time to 1 minute and 20 seconds and then made AME start the render at that (didn't work)
    - re-render (didn't work even on different presets)
    It's also not my audio file because I've tried rendering it with the audio starting at 1:20 and then the track was playing from the start.
    The video contains one audio track and one video and the project file is in After Effects.
    Is my AME bugged or am I doing something terrible wrong?
    Hope to hear from you guys.
    PS: I really don't want to render via After Effects, due to file size.

    I'm having a very similar problem. I just purchased a larger SD card thinking it was the card but it's definitely Media Encoder.
    Mine is also crashing in the middle of renders and causing my computer to crawl.

  • I just downloaded itunes match and started playing one song (country) and in the middle of the song it started paying another song.

    I just purchased itunes match, started playing a song and in the middle of the song it started playing another song (not on my playlist) still showing the image of the original song. 

    Hi CWaggoner,
    Thanks for visiting Apple Support Communities.
    If you're experiencing unexpected behavior when playing songs, I'd try the first four steps of this iPhone assistant:
    http://www.apple.com/support/iphone/assistant/application/
    Regards,
    Jeremy

Maybe you are looking for

  • ITunes 10.6.1.7 uses 99% of CPU / Win7

    iTunes consumes over 90% of my PC CPU when syncing my iPad 1. The sync does go thru but it takes a huge amout of time and while it's doing it I can't do anything with the PC as 90-99% of the CPU time is consumed by iTunes. When iTunes is "idle" (= no

  • Linking a Google Docs document to an InDesign document

    Hi, I have written a book in Google Docs that I'm planning to typeset in InDesign. I want to keep editing and adding to the Google Docs document, while I'm typesetting in InDesign. Is there a way to have the Indesign document be "dynamically" linked

  • Signal booster box

    My Vodafone contract runs out soon and I'd switch to BT mobile but reception here is poor so I'm using Vodafone's SureSignal box that works fine. Is there anything similar available from BT? I've seen a suggestion it might be incorporated into a new

  • ConnectException when using Tomcat 4.1

    Hi, I'm trying to run my web application with Tomcat 4.1 (until now I worked with Tomcat 3.2, and didn't have problems). In my application I have an applet that reads from a file (the file is located on the web server.) When I try to do it (using Url

  • Using joins In toplink

    Hi.I'm using toplink with JSF in Jdeveloper.I want to retrieve data by which uses joins between various tables and and then display it in a datatable.how can I do this??Also,I want scrolls in the datatable with one column fixed and the rest of the co