Music sync stops half way through "not enough access privilege to complete"

syncing entire music library. it stops halfway through and i get and error message "Attempting to copy to the disk image X Iphone failed. You do not have enough access privilege for this operation"
i close that window and there is another error "iTunes could not copy "X Song" to X iPhone because an unknown error has occurred. (-5000)
Any ideas on how to get this rig running as advertised? Thanks

Try to Reset the iPad:
From the Home screen double tap the Home button to view the multitasking bar at the bottom. Tap and hold an app at the bottom till the icons wiggle with the minus button visible. Tap the button to close all apps then tap the Home button to get back to the Home page. Press and hold the Sleep button till you see the Slide to power off message and power it off. Once powered down completely press and hold the sleep button till the Apple icon appears.

Similar Messages

  • Creative Cloud opening stops half way through with message: administrative privilege required.

    creative cloud opening stops half way through with message: administrative privilege required.

    It means what it says - you have to run as admin or a similar user with sufficient user privileges.
    Mylenium

  • My ipod stops half way through step 1 when I am syncing

    I[od touch stops half way through step q which i backing up

    I would try moving the existing backup to a safe place since there may be some corruption that is causing the problem.  The backup file is located hre:
    The folder where your backup data is stored changes depending on the computer's operating system. Since iTunes only keeps one backup per device, you should ensure the backup folder is included in your periodic data backup routine.
    iTunes places the backup files in the following places:
    Mac: ~/Library/Application Support/MobileSync/Backup/
    Windows XP: \Documents and Settings\(username)\Application Data\Apple Computer\MobileSync\Backup\
    Windows Vista and Windows 7: \Users\(username)\AppData\Roaming\Apple Computer\MobileSync\Backup\
    Note: If you do not see the AppData or Application Data folders, you may need to show hidden files (Windows XP,  Windows Vista and Windows 7).

  • Track purchased from iTunes stops half way through & Jumps to the next track on both computer & iPod

    Purchased album from iTunes. One track stops half way through & jumps to the next track on both computer & iPod.

    If your country's iTunes Store allows you to redownload purchased tracks, I'd delete your current copy of the track and try redownloading a fresh one. See the following document for instructions:
    Downloading past purchases from the App Store, iBookstore, and iTunes Store
    Otherwise, I'd report the problem to the iTunes Store.
    Log in to the Store. Click on "Account" in your Quick Links. When you're in your Account information screen, go down to Purchase History and click "See all".
    Find the item that is not playing properly. If you can't see "Report a Problem" next to the item, click the "Report a problem" button. Now click the "Report a Problem" link next to the item.

  • Audio stops half-way through clip

    Audio on movie clips stops half-
    way through.  This isn't downloaded music, but rather the background audio of the clips.  Any suggestion
    s?

    The footage appears the same from the Sony.
    The full audio plays in the Organizer and from the clip in the project panel.  The waveform shows for the entire length of the clip in the timeline.
    I didn't see the blue progress bar you spoke about, but the program just went through the process of importing the clips and then the organizer opened.
    Thanks.

  • Songs and Videos Stopping Half Way Through

    I've had my Iphone for 8 months and last week it broke i sent it to apple and they gave me a brand new iphone.
    I syned it up and my songs and videos stop half way through and start the next song..
    It did that on my old iphone also..
    It's very annoying.
    Same with sometimes glitchy music videos that i've bought through itunes so I know it isnt codec related..

    Welcome to the forums.
    You can fix the songs by simply converting to AAC -- I promise you this will work.
    Videos could indeed be a coding issue -- the iPhone is pretty particular about what it will play and unless you encoded them yourself (using a quality program like Handbrake with the iPhone preset) your best bet is to reencode them.

  • When trying to download the latest itunes it stops half way through and says "error occured whilst installing the update

    when trying to download the latest itunes it stops half way through and says "error occured whilst installing the update"
    anybody know how to fix this?

    Try updating your iTunes using an iTunesSetup.exe (or iTunes64Setup.exe) installer file downloaded from the Apple website:
    http://www.apple.com/itunes/download/

  • HT3209 my rental film has stopped half way through.

    my rental film has stopped half way through. I have run itunes diagnostics and everything is green, i have internet connection as other internet apps work, i cannot complete my viewing and it expires in a day. thx

    Contact support. They will let you re-download it or provide a refund if the item still won't play:
    http://www.apple.com/support/itunes/contact/

  • HT1390 My movie crashes/stops half way through at the same place every time. I would like to watch the whole film... who do I get to sort this out? thanks

    My movie crashes/stops half way through at the same place every time. I would like to watch the whole film... who do I get to sort this out? thanks!

    Click Support at the top of this page, then click the link under Contact Us

  • Am trying to sync my ipod nano 7th gen. i get this message: not enough access privileges."

    i am trying to sync my ipod nano 7th gen with my music on the cloud, via a desktop PC.
    I have successfully done this in the past.
    now I am getting a series of messages: "not enough access privileges"
    have reset the nano and also downloaded latest iTunes software.
    Any suggestions?

    Hi,
    I'm having a very similar problem, so I was excited to see the link above. But when I click on it, it redirects me to the nike.com main website (I'm assuming Nike redid their website since the above link was posted). Could you please point me to that article somewhere else or tell me how you fixed your problem?
    My exact problem is this: I was running until recently with my iPod Nano 6th gen and the Nike+ sensor kit (sensor that goes in the Nike+ shoe plus receiver that goes in the iPod Nano). When I would sync my Nano with iTunes (I would have the "Automatically send workout data to nikeplus.com" option checked), all was well with this set-up as far as syncing my stuff to the Nike+ website goes.
    I recently realized that for the iPod Nano 6th generation, the sensor/receiver combo is not required anymore. So I ran two runs without the receiver. I kept the sensor in the shoe though as nowadays I mostly run with my recently purchased Nike+ Sport GPS watch and I like to have the sensor in the shoe in case the GPS signal gets lost at some point during a run. Anyway, those two runs that I ran without the receiver won't sync to my nikeplus account. I can see them in my iPod Nano's history and I can see one of them (the latest one) on the Nike + iPod tab of iTunes when I sync my Nano. The difference though is that on iTunes this latest run appears under a "Sensor 1" selection, whereas all my previous runs with both the sensor and receiver would be under "Nike + Sensor" selection. Within the "Nike + Sensor" selection, under nikeplus.com, there's the "Automatically send workout data to nikeplus.com" option and below it a Login ID that shows my Nike+ website log-in info. Within the "Sensor 1" selection, the Login ID is missing. I've tried renaming "Sensor 1" to something else but it didn't make the Login ID appear.
    Thank you for reading this and any help would be greatly appreciated.
    Best,
    Dimitris.

  • HT1386 not enough access privileges to sync i pad to i tunes ?

    not enough access privileges to sync i pad to i tunes ?

    I am having the same problem. I had been able to sync with no problem but I changed some of the System Preferences for syncing two computers with Mobile Me. Now I can only sync the iPod Touch if I use the advance features in the Info panel to replace all of the items on iPod Touch. That works the next time I sync but I get the subject message when I try to sync again.

  • Ipod error message not enough access privileges

    Hi, When I try to sync my ipod classic to my itunes library (which I had done before on my previous computer without any issues) an error message comes up saying "attempting to copy to the disk Jayney's IP failed. You do not have enough access privileges for this operation. How can I overcome this? Do I need to restore settings?Thanks

    See:
    iPhone - not enough access privileges: Apple Support Communities

  • I get message:can't save library file not enough access privileges.Don't understand what this means?

    I get message:"Can't save library file.  Not enough access privileges" .Don't understand what this means. No visible effect that I can see now.

    Classic example of why you should save your workm in progress...just hit Ctrl+s to do it on the fly.
    Yes I know. But it is the first time I work with Photoshop on such a big project and I thought it would be more stable.. Do the newer versions manage the memory better ?
    You can shrink your image down which will make it smaller enough to save
    Not enough memory to resize the image. And in the manipulation, it would corrupt some of my layers..
    you can try to save as a diffeent format
    I could succesfully save in Bitmap format. But I lose all my layers info..
    The making loads of screen shots would be good if it wasnt really an
    option seeing as it would use even more memory to do that then put the
    image together out of the screen shots.
    I made screen shots without any problem. I saved them through MS Paint without any memory problem, while Photoshop in parallel was just used as a static image for snapping...

  • When downloading a digital copy get the message not enough access privileges?

    When downloading a digital copy from a purchased disk I keep getting the message "not enough access privileges",  any solutions?

    Yes. The disk drive has too much data on it. You are either going to have to move some to other disk drives or delete some.

  • WiFi Sync stops half way

    On top of the more general issues with WiFi sync where stuff just vanishes from iTunes I've also had many instances where my iPhone will just vanish half way through a sync.
    I have the phone plugged in, not moving, a full WiFi signal yet I'll get a message in iTunes saying something like 'XYZ could not be copied to your iPhone because it is no longer connected' or something like that.
    Sure enough, the iPhone is now vanished from the sidebar.  ARRRRRGGGGGG Soooo many problems with this phone.

    I've had this same problem with my iPad. I'm afraid I've lost a significant amount of app data. Any ideas, anyone?

Maybe you are looking for

  • Problems with mail after every shutdown

    I posted a few days ago when mail kept crashing following the security update (probably due to me not closing all applications before installing). I managed to get mail working again by resetting the junk mail filter. However, since then I have had p

  • Large BI Publisher reports fail with client-error-request-value-too-long

    We are running BI Publisher 5.6.3 with Oracle Applications 11.5.10.2, and are having frequent failures with client-error-request-value-too-long messages on large PDF reports that cause the entire report to not print. The exact error message is as fol

  • HP Laserjet 100 color MFP M175nw does not connect to Virgin SuperHub

    Spent the last day trying to connect my laptop wirelessly to a HP Laserjet 100 color printer. I've uninstalled and tried to re-install the software, both from the disk supplied with the printer and from the less than useful HP support website. The in

  • Acrobat Pro 9 - Installation Error 1335

    Hi! I'm trying to install Acrobat Pro 9, but it keeps telling me, "Error1335. The cabinet file 'PCW_CAB_ACRO' ... cannot be used. ..." If I click "ignore", it can not finish the installation and i have to cancel it. What can I do about this?

  • How to charge the mouse on IMac?

    how to I block certain emails on my IMac?