Music transfers very slow and takes a while to load in player- yahoo mu

I got the new beta firmware and I downloaded about 650 songs via Yahoo music unlimited. I tranfered only about 250 songs in 2 hours... I have USB . but it shouldnt be this slow. Also when I try to play the songs on my mp3 player they take about 0 seconds to start up. When I play an album straight threw the songs usually dont take awhile to load up next to next song, but when I change the song they always take awhile. I wonder if these problems are just becuase of the beta firmware. The reason why I got this player was becuase it worked with subsciption music, but it seems to be kinda buggy right now

Well I have done the disk cleanup and it still didnt fix it. I just got this player yesterday too I have about 3.5 gigs on it. I didnt get my usb 2.0 system yet, but im just really worried about these long load times for the songs on the player. Im gona try loading some mp3s and see how those go.
edit... I just loaded up some MP3s and they start in about 3-4 seconds. A lot faster then my WMAs from yahoo, but still I was expecting mp3s to play instantly pretty much.Message Edited by Johnwashere on 05-2-2005 2:26 AM

Similar Messages

I don't want to stay with iOS 7 any more, i can't tolerate it to being very slow and to hand while playing games, it doesn't run properly, i have no games in my phone right now becouse of that bug, could i downgrade my ios of iphone 4s? Please help thanx

I don't want to stay with iOS 7 any more, i can't tolerate it to being very slow and to hand while playing games, it doesn't run properly, i have no games in my phone right now becouse of that bug, could i downgrade my ios of iphone 4s? Please help thanx

That is HANG sorry miss type

Please help: Course loads very slow and takes almost 100% cpu and 1.08 GB memory

The total page number is 129. We used Captivate 5.5. We have several Webpage widgets and a few videos. I tried to take out the web widgets and the videos, however, the course still loads very slow.
I would really appreciate if someone can give somve suggestion.
Thank you very much.

Captain Ibuprofen, we actually continued having the slowness problem in the past week. Then one of our developers found out the reason: as same as yours, caused by the page number widget. I wish we would have seen your response earlier. But yeah, so now we took out the page number widget and everything goes normal.
Also thanks for the tips on using the cpInfoCurrentSlide variable when adding the slide number. Thanks Andy.

Hello, I just bought the apple Airport Express, and I am suffering from lots of difficulties. It is in the middle of out apartment and from a bedroom, it runs very slow and sometimes doesn't even load. I would like to know what might make it stronger.

Hello, I just bought a Airport Express, and on the first day it has a a weak signal. It is very far from my working space and my apartment has very thick walls that might be blocking the signal. I would like to know if I can do anything to make it stronger or faster. If you know please reply.

You need to move the AirPort Express closer to the bedroom.
You can leave the modem at its current location and purchase a longer Ethernet cable to move the AirPort Express virtually anywhere that you want. The closer that you can locate the AirPort Express to your working space, the better the signal will be.
Standard lengths of Ethernet cables are 6 feet (2 meters), 25 feet (8 meters), and 50 feet (15 meters). Any computer / electronics superstore will have a selection of Ethernet cable from which to choose.

Internet connection very slow and cannot download IOS 5as its takes 6 hours and then apple has timed me out . Can any one help?

Internet connection very very slow and it takes 6 hours to download IOS 5 which by that time I am timed out . Can anyone help

iPad: Basic troubleshooting
http://support.apple.com/kb/TS3274
iOS: Resolving update and restore alert messages
http://support.apple.com/kb/TS1275
iPad: Unable to update or restore
http://support.apple.com/kb/ht4097
 Cheers, Tom

I have Soundtrack Pro 1.1 It opens OK but the everything takes 4 seconds to work. It's very slow and unusable. Is this a well known problem?

I have Soundtrack Pro 1.1 It opens OK but the everything takes 4 or so seconds to work. It's very slow and unusable in its present state. Is this a well known problem?

STP 3.0.1 was the version designed to work with OSX 10.6.8. Anything earlier than that and issues may arrise. Hard to tell what yours are.
You may want to run Digital Rebellion's Preference Manager to reset the prefs back to the default state. If nothing else, it is a good troubleshooting step.
Good luck.
x

Netflix /youtube is very slow and jerky

My macbook pro is a 2.43 GHz intel Core duo with 4GB of memory. I updated to Maverics and Netfix and youtube became very slow and jerky.
Even moving the mouse causes probles with playback.
This does not happen my wifes mac book pro, or my small windows laptop and it did not happen untill I updated to maverics.
Any suggestions?
Thanks

1. This procedure is a diagnostic test. It changes nothing, for better or worse, and therefore will not, in itself, solve the problem.
2. If you don't already have a current backup, back up all data before doing anything else. The backup is necessary on general principle, not because of anything in the test procedure. There are ways to back up a computer that isn't fully functional. Ask if you need guidance.
3. Below are instructions to run a UNIX shell script, a type of program. All it does is to collect information about the state of the computer. That information goes nowhere unless you choose to share it. However, you should be cautious about running any kind of program (not just a shell script) at the request of a stranger on a public message board. If you have doubts, search this site for other discussions in which this procedure has been followed without any report of ill effects. If you can't satisfy yourself that the instructions are safe, don't follow them. Ask for other options.
Here's a summary of what you need to do, if you choose to proceed: Copy a line of text from this web page into the window of another application. Wait for the script to run. It usually takes a few minutes. Then paste the results, which will have been copied automatically, back into a reply on this page. The sequence is: copy, paste, wait, paste again. Details follow.
4. You may have started the computer in "safe" mode. Preferably, these steps should be taken in “normal” mode. If the system is now in safe mode and works well enough in normal mode to run the test, restart as usual. If you can only test in safe mode, do that.
5. If you have more than one user, and the one affected by the problem is not an administrator, then please run the test twice: once while logged in as the affected user, and once as an administrator. The results may be different. The user that is created automatically on a new computer when you start it for the first time is an administrator. If you can't log in as an administrator, test as the affected user. Most personal Macs have only one user, and in that case this section doesn’t apply. Don't log in as root.
6. The script is a single long line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, though you may not see all of it in the browser window, and you can then copy it. If you try to select the line by dragging across the part you can see, you won't get all of it.
Triple-click anywhere in the line of text below on this page to select it:
PATH=/usr/bin:/bin:/usr/sbin:/sbin; clear; Fb='%s\n\t(%s)\n'; Fm='\n%s\n\n%s\n'; Fr='\nRAM details\n%s\n'; Fs='\n%s: %s\n'; Fu='user %s%%, system %s%%'; AC="com.autodesk.AutoCAD com.google.GoogleDrive"; H='^[[:space:]]*((127\.0\.0\.1|::1|fe80::1%lo0)[[:space:]]+local|(255\.){3}255[[:space:]]*broadcast)host[[:space:]]*$'; NS=networksetup; PB="/usr/libexec/PlistBuddy -c Print"; A () { [[ a -eq 0 ]]; }; M () { find -L "$d" -type f | while read f; do file -b "$f" | egrep -lq XML\|exec && echo $f; done; }; AT () { o=`file -b "$1" | egrep -v '^(A.{16}t$|cann)'`; Ps "${1##*/} format"; }; Pc () { o=`grep -v '^ *#' "$2"`; l=`wc -l <<< "$o"`; [[ l -gt 25 ]] && o=`head -n25 <<< "$o"`$'\n'"[$((l-25)) more line(s)]"; Pm "$1"; AT "$1"; }; Pm () { [[ "$o" ]] && o=`sed -E '/^ *$/d;s/^ */ /;s/[-0-9A-Fa-f]{22,}/UUID/g;s/(ochat)\.[^.]+(\..+)/\1\2/;/Shared/!s/(\/Users\/)[^/]+/\1-/g' <<< "$o"` && printf "$Fm" "$1" "$o"; }; Pp () { o=`$PB "$2" | awk -F'= ' \/$3'/{print $2}'`; Pm "$1"; }; Ps () { o=`echo $o`; [[ ! "$o" =~ ^0?$ ]] && printf "$Fs" "$1" "$o"; }; R () { o=; [[ r -eq 0 ]]; }; SP () { system_profiler SP${1}DataType; }; id -G | grep -qw 80; a=$?; A && sudo true; r=$?; t=`date +%s`; clear; { A || echo $'No admin access\n'; A && ! R && echo $'No root access\n'; SP Software | sed -n 's/^ *//;5p;6p;8p'; h=(`SP Hardware | awk '/ Id/{print $3}; /Mem/{print $2}'`); o=$h; Ps "Model"; o=$((h[1]<4?h[1]:0)); Ps "Total RAM (GB)"; o=`SP Memory | sed '1,5d;/[my].*:/d'`; [[ "$o" =~ s:\ [^O]|x([^08]|0[^2]|8[^0]) ]] && printf "$Fr" "$o"; o=`SP Diagnostics | sed '5,6!d'`; [[ "$o" =~ Pass ]] || Pm "POST"; p=`SP Power`; o=`awk '/Cy/{print $NF}' <<< "$p"`; o=$((o>=300?o:0)); Ps "Battery cycles"; o=`sed -n '/Cond.*: [^N]/{s/^.*://p;}' <<< "$p"`; Ps "Battery condition"; for b in FireWire Thunderbolt USB; do o=`SP $b | sed -En '/:$/{s/ *:$//;x;s/\n//;s/\n.*//;/\)/p;};/^ *(V.+ [0N]|Man).+ /{s/ 0x.... //;s/[()]//g;s/(.+: )(.+)/ (\2)/;H;};/Apple|Genesy|Intel|SMSC/{s/.//g;h;}'`; Pm $b; done; o=`pmset -g therm | sed 's/^.*C/C/'`; [[ "$o" =~ No\ th|pms ]] && o=; Pm "Thermal conditions"; o=`pmset -g sysload | grep -v :`; [[ "$o" =~ =\ [^GO] ]] || o=; Pm "System load advisory"; o=`nvram boot-args | awk '{$1=""; print}'`; Ps "boot-args"; fdesetup status | grep -q On && o=on || o=; Ps "FileVault"; a=(/ ""); A=(System User); for i in 0 1; do o=`cd ${a[$i]}L*/Lo*/Diag* || continue; for f in *.{cr,h,pa,s}*; do [[ -f "$f" ]] || continue; d=$(stat -f%Sc -t%F "$f"); [[ "$f" =~ h$ ]] && grep -lq "^Thread c" "$f" && f="$f *"; echo "$d ${f%%_2*} ${f##*.}"; done | sort | tail`; Pm "${A[$i]} diagnostics"; done; grep -lq '*$' <<< "$o" && printf $'\n\t* Code injection\n'; o=`syslog -F bsd -k Sender kernel -k Message CReq 'caug|GPU |hfs: Ru|last value [1-9]|n Cause: -|NVDA\(|pagin|proc: t|Roamed|rror|ssert|Thrott|timed? ?o|WARN' -k Message Ane 'SMC:' | tail -n25 | awk '/:/{$4=""; $5=""};1'`; Pm "Kernel messages"; o=`df -m / | awk 'NR==2 {print $4}'`; o=$((o<5120?o:0)); Ps "Free space (MiB)"; o=$(($(vm_stat | awk '/eo/{sub("\\.",""); print $2}')/256)); o=$((o>=1024?o:0)); Ps "Pageouts (MiB)"; s=( `sar -u 1 10 | sed '$!d'` ); [[ s[4] -lt 85 ]] && o=`printf "$Fu" ${s[1]} ${s[3]}` || o=; Ps "Total CPU usage" && { s=(`ps acrx -o comm,ruid,%cpu | sed '2!d'`); n=$((${#s[*]}-1)); c="${s[*]}"; o=${s[$n]}%; Ps "CPU usage by process \"${c% ${s[$((n-1))]}*}\" with UID ${s[$((n-1))]}"; }; s=(`top -R -l1 -n1 -o prt -stats command,uid,prt | sed '$!d'`); n=$((${#s[*]}-1)); s[$n]=${s[$n]%[+-]}; c="${s[*]}"; o=$((s[$n]>=25000?s[$n]:0)); Ps "Mach ports used by process \"${c% ${s[$((n-1))]}*}\" with UID ${s[$((n-1))]}"; o=`kextstat -kl | grep -v com\\.apple | cut -c53- | cut -d\< -f1`; Pm "Loaded extrinsic kernel extensions"; R && o=`sudo launchctl list | awk 'NR>1 && !/0x|com\.(apple|openssh|vix\.cron)|org\.(amav|apac|calendarse|cups|dove|isc|ntp|openld|post[fg]|x)/{print $3}'`; Pm "Extrinsic daemons"; o=`launchctl list | awk 'NR>1 && !/0x|com\.apple|org\.(x|openbsd)|\.[0-9]+$/{print $3}'`; Pm "Extrinsic agents"; o=`for d in {/,}L*/Lau*; do M; done | egrep -v 'com\.apple\.(CSConfig|server)' | while read f; do ID=$($PB\ :Label "$f") || ID="No job label"; printf "$Fb" "$f" "$ID"; done`; Pm "launchd items"; o=`for d in /{S*/,}L*/StartupItems; do M; done`; Pm "Startup items"; sys=`pkgutil --regexp --only-files --files com.apple.pkg.* | sort | uniq | sed 's:^:/:'`; b=`sed -E '/^.+Lib.+\/Contents\/Info.plist$/!d;s/\/Info.plist$//;/Contents\/./d' <<< "$sys"`; l=`egrep '^/usr/lib/.+dylib$' <<< "$sys"`; [[ "$b" && "$l" ]] && { o=`find -L /S*/L*/{C*/Sec*A,E}* {/,}L*/{A*d,Compon,Ex,In,iTu,Keyb,Mail/B,P*P,Qu*T,Scripti,Sec,Servi,Spo}* -type d -name Contents -prune | grep -Fv "$b" | while read d; do test -f "$d/Info.plist" || continue; ID=$($PB\ :CFBundleIdentifier "$_") || ID="No bundle ID"; printf "$Fb" "${d%/Contents}" "$ID"; done`; Pm "Extrinsic loadable bundles"; o=`find /usr/lib -type f -name *.dylib | grep -Fv "$l"`; Pm "Extrinsic shared libraries"; :; } || echo $'\nReceipts missing'; o=`for e in INSERT_LIBRARIES LIBRARY_PATH; do launchctl getenv DYLD_$e; done`; Pm "Inserted dylibs"; o=`find -L {,/u*/lo*}/e*/periodic -type f -mtime -10d`; Pm "Modified periodic scripts"; o=`scutil --proxy | grep Prox`; Pm "Proxies"; o=`scutil --dns | awk '/r\[0\] /{if ($NF !~ /^1(0|72\.(1[6-9]|2[0-9]|3[0-1])|92\.168)\./) print $NF; exit}'`; i=`route -n get default | awk '/e:/{print $2}'`; I=`$NS -listnetworkserviceorder | sed -En '/ '$i'\)$/{x;s/^$.+$ //p;q;};x'`; n=`$NS -getdnsservers "$I" | awk '!/^T/{printf "not "; exit}'`; Ps "DNS (${n}from DHCP)"; o=`$NS -getinfo "$I" | awk '/k:/{if ($3 !~ "(255\.){3}0") print $3}'`; Ps "Netmask"; R && o=`sudo profiles -P | grep : | wc -l`; Ps "Profiles"; f=auto_master; [[ `md5 -q /etc/$f` =~ ^b166 ]] || Pc $f /etc/$f; for f in fstab sysctl.conf crontab launchd.conf; do Pc $f /etc/$f; done; f=/etc/hosts; Pc "hosts" <(egrep -v "$H" $f ); AT $f; Pc "User launchd" ~/.launchd*; R && Pc "Root crontab" <(sudo crontab -l); Pc "User crontab" <(crontab -l); R && o=`sudo defaults read com.apple.loginwindow LoginHook`; Pm "Login hook"; LD="$(`find /S*/*/F* -type f -name lsregister | head -n1` -dump)"; o=`for ID in $AC; do [[ "$LD" =~ $ID ]] && echo $ID; done`; Pm "Application check"; Pp "Global login items" /L*/P*/loginw* Path; Pp "User login items" L*/P*/*loginit* Name; Pp "Safari extensions" L*/Saf*/*/E*.plist Bundle | sed -E 's/(\..*$|-[1-9])//g'; o=`find ~ $TMPDIR.. $ -flags +sappnd,schg,uappnd,uchg -o ! -user $UID -o ! -perm -600 $ | wc -l`; Ps "Restricted user files"; cd; o=`SP Fonts | egrep 'id: N|te: Y' | wc -l`; Ps "Font problems"; o=`find L*/{Con,Pref}* -type f ! -size 0 -name *.plist | while read f; do plutil -s "$f" >&- || echo $f; done`; Pm "Bad plists"; d=(Desktop L*/Keyc*); n=(20 7); for i in 0 1; do o=`find "${d[$i]}" -type f -maxdepth 1 | wc -l`; o=$((o<=n[$i]?0:o)); Ps "${d[$i]##*/} file count"; done; o=; [[ UID -eq 0 ]] && o=root; Ps "UID"; o=$((`date +%s`-t)); Ps "Elapsed time (s)"; } 2>/dev/null | pbcopy; exit 2>&-
Copy the selected text to the Clipboard by pressing the key combination command-C.
7. Launch the built-in Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Click anywhere in the Terminal window and paste (command-V). The text you pasted should vanish immediately. If it doesn't, press the return key.
8. If you see an error message in the Terminal window such as "syntax error," enter
exec bash
and press return. Then paste the script again.
9. If you're logged in as an administrator, you'll be prompted for your login password. Nothing will be displayed when you type it. You will not see the usual dots in place of typed characters. Make sure caps lock is off. Type carefully and then press return. You may get a one-time warning to be careful. If you make three failed attempts to enter the password, the test will run anyway, but it will produce less information. In most cases, the difference is not important. If you don't know the password, or if you prefer not to enter it, press the key combination control-C or just press return three times at the password prompt. Again, the script will still run.
If you're not logged in as an administrator, you won't be prompted for a password. The test will still run. It just won't do anything that requires administrator privileges.
10. The test may take a few minutes to run, depending on how many files you have and the speed of the computer. A computer that's abnormally slow may take longer to run the test. While it's running, there will be nothing in the Terminal window and no indication of progress. Wait for the line
[Process completed]
to appear. If you don't see it within half an hour or so, the test probably won't complete in a reasonable time. In that case, close the Terminal window and report the results. No harm will be done.
11. When the test is complete, quit Terminal. The results will have been copied to the Clipboard automatically. They are not shown in the Terminal window. Please don't copy anything from there. All you have to do is start a reply to this comment and then paste by pressing command-V again.
If any private information, such as your name or email address, appears in the results, anonymize it before posting. Usually that won't be necessary.
12. When you post the results, you might see the message, "You have included content in your post that is not permitted." It means that the forum software has misidentified something in the post as a violation of the rules. If that happens, please post the test results on Pastebin, then post a link here to the page you created.
Note: This is a public forum, and others may give you advice based on the results of the test. They speak only for themselves, and I don't necessarily agree with them.
Copyright © 2014 by Linc Davis. As the sole author of this work, I reserve all rights to it except as provided in the Terms of Use of the Apple Support Communities website ("ASC"). Readers of ASC may copy it for their own personal use. Neither the whole nor any part may be redistributed.

I am having a problem with my cs6 running very slow and when i save i am getting an error message that says, "This document is bigger than 2 gb (the file may not be read correctly by some TIFF viewers.) please help

I am having a problem with my cs6 running very slow and when i save i am getting an error message that says, "This document is bigger than 2 gb (the file may not be read correctly by some TIFF viewers.) please help

wen6275,
It looks like you're actually using a camera or phone to take a photo of your monitor.
That's not what is commonly known as a "screen shot".
It looks like you're on a Mac. Hitting Command+Shift+3 places a capture of the contents of your entire monitor on your Desktop; hitting Command+Shift+4 will give you a cross-hairs cursor for you to select just the portion you want to capture.
I'm mentioning this because I fear I'm not construing your original post correctly when you type "I am working with a large files [sic], currently it has 149 layers, all of which are high resolution photographs", so I'm wondering if there's some similar use of your own idiosyncratic nomenclature in your description of your troublesome file.
Perhaps I'm just having a major senior moment myself, but I'm utterly unable to imagine such a file. Would you mind elaborating?

HT1338 XSERVE 10.6.8 is running very slow, and Workgroup Manager is not responding

XSERVE 10.6.8 is running very slow, and Workgroup Manager is not responding. There is no more updates to download.

munish khanna wrote:
1. upgrade to lion, which should over write previous software and the reasons for it being slow.
No, you don't want to upgrade over a buggy system, Lion has issues of it's own that will only complicate matters, plus Lion is slower than Snow Leopard.
Learn all the pitfalls before you upgrade to Lion, like all your Rosetta/older programs will no longer work and more.
Leave Lion for a new hardware purchase is my advice, it's still got plenty of security and other issues.
For your performance, your likely better off replacing the hard drive with a 7,200 RPM model and maxing the RAM, download the free MacTracker to find out your specs, and OtherWorld Computing is good for videos, tools and parts.
http://eshop.macsales.com/installvideos/
2. Format the hard disc and reinstall snow leopard.
That will work, provided your data is off the machine first.
Now how do i reinstall snow leopard as it was an online purchased upgrade from leopard.
The 10.6 Snow Leopard disk that you upgraded 10.5 Leopard from actually has the full OS X 10.6 on it.
All you have to do is stick the disk in and hold the c key down while booting, use Disk Utility to erase the entire drive, quit and install 10.6.
Of course your not going to get the free iLife that came with the 10.5 grey disks, see if you can first install 10.5 with the same methods, then setup with the same user name as before, then upgrade to 10.6
I think Apple nulled booting off the 10.5 disks, but it won't hurt to try.
Another method would be to install 10.6 fresh by itself, then use the program called Pacifist to extract iLife from the 10.5 disks.
http://www.charlessoft.com/
Read here for plenty of how to's
https://discussions.apple.com/message/16276201#16276201

Navigation very slow and not able to enter in memory a sequence issue

Hello,
we have a big problem with oracle forms performance since we deployed our
application to the web. all our customers are not confortable with this new
environment because the sytem are very slow and working it's very difficult.
our application is very slow in point of when the user use very quickly the key
functions it doens't work.
I explain :
for example, we have a button &Verifier (alt+v : acces key to this button) and
when clicking to button we have a dialox box that contains 2 buttons:
Oui(alt+O:access key) and Non(alt+N:access key) and if we click Oui(alt+O) it
popup as an information box and we must click Ok(alt+O: access key).
then if we click quickly alt+v after alt+o after alt+o it doens't work and it
wait to click againt alt+o.(like the system doesn't follow or has not yet enter all the sequence in the memory)
before in client/server it work's fine.
it's like our application in the web it's not able to entered in memory a
serial of access key.
please can you help me the problem is always occuring in the production
environment.
our environment:
- oracle jiniator :1.3.1.22
OAS 10G (9041)
DATABASE 9206
- the complete version of forms : 9.0.4.0.19
- we have 23 USERS.
any help are welcome, the problem are urgent.
thank you.

Hi
Lets analyse and hope to narrow down your issue
We have used the Pick and Pack Manager to release goods from Sales Order through to Invoice. The functionality offered is good,
> Slow performance could be triggered by multile issue , so lets wait
> Do you know PICKand PACK manager is only for status ,but it actually doesn't affect inventory level .
but in practise the system is so slow it is taking 2 to 3 times longer than copying to a Sales Invoice.
> You need to do delivery first and transfer the delivery into invoice .
Is there any way of cutting out part of the process to speed things up? What we really need is to be able to create an invoice(s) straight from the Pick and Pack manager.
>> It basically depends upon your business process . but by software , You can bypass Pick and PACK Manager process. You can transfer your sales order into A/R invoice and while posting A/R invoice , inventory will be reduced .
Hope this help to narrow down your issue
thank you
Bishal

Cover flow is very slow and crashes on iOS 5 or is it just my iPod Touch?

Basically, everytime I use cover flow on my music and scroll around it laggs and crashes. The simple solution is to not use it I know but I'm just wondering if you guys are having the same problem.

Same here on my 3GS. Found that restoring a second time the phone helps,no more crash,but still very slow and freezing,compare to flawless response on previous IOS3-4.
Note that looking at diagnostics reports,it have lot's of "LowMemory" and "awdd" messages with dates corresponding to the times is was using cover flow.
Even outside of cover flow,my 3GS registers lags corresponding "LowMemory" reports quite often.
I enable then sharing to Apple of those diagnostics on the phone,hope they fix this soon!

Query runs very slow and sometime freezes

Hi Experts,
I have just installed SAP GUI 710 but when i open a query in analyzer it runs very slow and if the variables are set for more than 6 months it just sits there and finally times out. It takes at least 5 minutes to open the query if it opens at all. Can you please advise me on how to resolve this issue??
Thanks, point will be awarded.

Worth running RSRT .
Ravi Thothadri

My Iphone 6 (8.1.2) is very slow and sluggish to response whenever it is connected any bluetooth devices ex. my car audio or bluetooth headsets

My Iphone 6 (8.1.2) is very slow and sluggish to response whenever it is connected any bluetooth devices ex. my car audio or bluetooth headsets
The moment I disconnect the bluetooth , the phone turns normal again. This happens when i awaken the phone and try to access the home screen, this takes almost 4 to 5 seconds at times.
Is anyone facing similar issues, Please advice

My Iphone 6 (8.1.2) is very slow and sluggish to response whenever it is connected any bluetooth devices ex. my car audio or bluetooth headsets
The moment I disconnect the bluetooth , the phone turns normal again. This happens when i awaken the phone and try to access the home screen, this takes almost 4 to 5 seconds at times.
Is anyone facing similar issues, Please advice

Premier Elements 4 very slow and frequently crash

Dear Adobe support staff,
I've purchased Adobe Premier Elements 4 several yeard ago for an urgnet job I made.
I didn't use it much because it crashes all the time, and it is very very slow and frustrating. So I've used other software instead.
Needless to say that I was very dissappointed.
Now, I want to give it a second chance. but it stiil keep crashing and still very very slow.
My questions:
1. Why does it crash all the time? is there is a fix for the problem?
2. What kind of Graphics Card or Video Editing Card do you recommend for my system to work relatively normal ?
3. How much will it cost me to upgrade to version 11 ?
My system SPEC:
OS: Microsoft Windows 7 ultimate with SP1 (32bit) .
CPU: INTEL Core2 QUAD cpu Q9550 , 2.83 GHZ with a 4 GB of RAM.
Graphics card: NVIDIA GeForce 9600 GT.
Motherboard: MICRO STAR INTERNATIONAL , MODEL MS-7353 3.0, CHIPSET INTEL X48,
RAM: 4 GB Dual Channel DDR2, 400 MHZ , 512 MB memory.
Please advice.
Sincerely yours,
Shimon Tourgeman.

For the crashing, this FAQ Entry might be useful. It starts with a general PrE checklist, then goes into computer and OS tuneup, and ends with many links on troubleshooting and finding causes: http://forums.adobe.com/thread/792580?tstart=0
As for the GPU, any current video card, with at least 1GB of VRAM, will work well. PrE does not place much of a load on the GPU, but it DOES rely very, very heavily on the video driver. Both nVidia and AMD/ATI issue constant driver updates, with nVidia leading the way at this moment.
Also, while talking about drivers, some users have experienced issues with Win8 drivers. I would wait until SP1 has been released for Win8, before changing to it from Win7. For this reason, I just ordered a new laptop, and specified Win7. As the company, ADK, only builds custom and semi-custom video editing machines, they commented that they will ONLY install Win7 at this time, and have been testing Win8, since the first beta. They do not think that it is yet ready for "prime time."
Good luck,
Hunt
PS - I still use PrE 4.0, but on XP-Pro SP3, and have only crashed it 2-3 times over the years. At least 2 times, it was due to OE on my part. However, my computer is tuned and built for video editing.

Indesign image display is very slow and jerky

good morning
I contacted Adobe Customer Service in Italy because I have big problems with the Creative Suite CS 5.5, in particular with Indesign and in general with the display of images of AI and Acrobat.
As I work with Indesign image display is very slow and jerky. Even with AI and Acrobat work experience is not good, the images are jerky and there are hesitations in the fluidity of view.
The software is installed on windows 7 64bit Utlimate, the workstation is very powerful: Supermicro motherboard, dual Xeon E5620 2.4ghz, 16gb ram, SSD OCZ vertex4, PNY Nvidia Quadro 4000.
The customer service has sent me several tips for email, I have followed all the instructions but I did not get results. In conclusion, when I pointed out that reading on the forums I was not the only one who showed this problem and after discussing about my hardware configuration, they told me that the problem is probably due to the fact that I have two Xeon processors!
In efects had observed that CS 5.5 on my notebook works better, but I never thought about having problems because the PC is powerful. I checked the CPU and GPU when using Indesign and I could see that uses a single CPU, and most "only 1 core"! But of CPUs in the system there are two for a total of 8 cores. Indesign seems to use only 1/8 of the available computing power ... In addition, practically does not use the GPU (only 10-15%).
From the customer service was suggested to disable or remove a processor from the system. All this seems to me incredible. I use the workstation for applications that can take advantage of the power of the machine, should I remove the processor whenever I have to use CS 5.5? If things are this way I'm thinking of asking if Adobe buy me a PC with a single processor only for use with CS 5.5 ...
Thank you.

Interesting idea, I'll investigate in this direction, I should try to make a mirror of the ssd on a traditional hard drive, exchange them and see if the situation changes. It must, however, be a further factor in the eventual bad combination hardware ... on my laptop I have: windows 7 x64, intel core i7 processor, 16gb of ram, nvidia quadro 3000m, and .... a ssd ocz agility 3, but indesign is more responsive.
But why indesign should be influenced by the hard-drive? With 16gb of ram and working files on NAS because in design interacts with the hard drive?

Music transfers very slow and takes a while to load in player- yahoo mu

Similar Messages

Maybe you are looking for