Music transmitting through built-in mic, despite being played through my headphones.

Im attempting to use my built in microphone over Skype, and it's transmitting the music I'm playing despite the fact that I'm playing it into my headphones. It's not a question of the volume the music is at, it appears to be directly transmitting the audio out. Can someone explain how I stop this ridiculous malfunction?

FoxFrost wrote:
Can someone explain how I stop this ridiculous malfunction?
No sorry, that sounds very odd, if not near impossible.
How high have you got your input volume on the mic?
They are very sensitive. I can have a conversation on skype while I'm 8 meters away from my MBP and not have to raise my voice or repeat myself.

Similar Messages

I have a macbook pro in which i use for church recordings. it has a built in mic so like one hole for headphones and mic. how do i get it to only pick up the sound from the external mic that is coming into the mixer to the laptop. it seems to pick up ever

I have a macbook pro in which i use for church recordings. it has a built in mic so like one hole for headphones and mic. how do i get it to only pick up the sound from the external mic that is coming into the mixer to the laptop. it seems to pick up everything, like for example any little movement i make or even just asking the next person a question will get picked up by the internal mic. is there a way i can mute the internal mic so it can only pick the external mic and not every movement im making like chewing etc

I have a macbook pro in which i use for church recordings. it has a built in mic so like one hole for headphones and mic. how do i get it to only pick up the sound from the external mic that is coming into the mixer to the laptop. it seems to pick up everything, like for example any little movement i make or even just asking the next person a question will get picked up by the internal mic. is there a way i can mute the internal mic so it can only pick the external mic and not every movement im making like chewing etc

My built in mic gets disabled whenever i connect headphones. how do i enable the build in mic and still use my headphones?

I have the New Ipad which im using mainly for music. i connect my guitar to it and record, and for monitoring i use headphones. what happens is after the first input is recorded if i put on headphones to monitor the first track and record something over track 2 my headphone mic is used instead of the ipad mic which is kind of annoying and bad quality. can i somehow make it such that my ipad mic is always used as a priority regardlesss of headphones being plugged in or not? help please

only if u switch on the loudspeak while u are on call your built in mic while be switched on

I can't hear music/sound through my headphones.

Hi
Basically. I have the iPhone earbuds.... when I plug them into my iMac I can hear Skype calls through them no problem. If I turn iTunes on and play music... I hear nothing. If iTunes is playing when I answer a call, I have my conversation and end the call... the music plays briefly through the earbuds then stops. I can't hear anything through them except when I'm having a skype conversation.
I am currently running osx Maverick. This wasn't a problem before, but now that I have updated, it's happening and it's really frustrating. I also option clicked the sound icon in the bar and it's showing my headphones are connected. Please help?

I figured it out.
When you plug them in, you have to adjust the volume directly from the headphones or you don't hear anything. So use the little control on your apple headset and the sound will work. I feel like such an idiot for not figuring that out sooner *facepalm*

My iPod shuffle went through the washer and dryer. The little light turns on but no music comes through any headphones. ???

What to do??
Okay so I found my iPod had gone through the washer and dryer. It was perfectly dry. I tried to turn it on, and nothing. But I thought maybe it's just dead. So I plugged it in, let it charge...when I tried to turn it on, the little light went green. I thought hurray!! But I put in the earbuds and heard nothing except some random "Battery level 75 percent." On my sister's earbuds. On my earbuds, which went through the washer too, nothing.
What to do???

It's likely that your iPod is toast. It does not play well with water and soap.
B-rock

E531 - When standard headphones plugged into jack, built-in mic is disabled

Greetings everyone ! Lemme start by saying I genuinely feel guilty when my first ever forum post is about a problem/issue, but apparently it's my curse, lol. Per standard rules, I did search through the Edge listing for a solution to my issue, but no luck. So:
The E531 has one headphone jack, however it's apparently intended use is for headSETS ('phones/mic combo). Currently, my only interest for the port is standard headphones. However, there is an issue: when a pair of standard headphones are plugged in, the built-in mic is disabled so the mic on a headset can be used.
Is there a setting or config change anywhere in the E531 that would allow the built-in mic to be used when standard headphones are plugged in to the headset jack? I've played around with audio settings as far as I dare to. Please, any help would be greatly apreciated.
edit: I'm not sure how my Subject line got completely reworded, but I've changed it to suit my topic. Sorry for the confusion.

There is definitely something strange here. I tried to reproduce your issue and if I plug headphones or headset I can still switch the microphone and speakers under Control Panel>Sound.
Have you got the latest sound card drivers?
Vince.
Knowledge is of two kinds. We know a subject ourselves, or we know where we can find information on it.
ThinkPad T510 4313-CTO Windows 8 x64 - Intel Core i7-620M - NVIDIA NVS 3100M - 8GB RAM - 240GB SSD- Intel Centrino Ultimate-N 6300 - Gobi 2000.
ThinkPad Helix 3697-CTO Windows 8.1 x64 - Intel Core i7-3667U - Intel HD Graphics 4000 - 8GB RAM- 256GB SSD - Intel Centrino Advanced-N 6205 - Ericsson C5621gw

Why does 10.5.0.142 update playback sound as if it were being played through scuba diver mic with a power saw in the background?

What in the world have they done now? After down loading your latest iTunes update (10.5.0.142) the podcasts and radio and any music stored on the iTunes sounds as if it were being played through scuba diver mic with a power saw in the background - nothing can be understood. CD play back is fine. Please tell me how fix this or how to go back to the previous version.

Same problem here. Sounds like Zarvox on my iMac, but way worse. Gonna do a bit of research around iTunes Support site. I should have learned a long time ago--wait a few days before updating. THIS IS VERY ANNOYING!!!!!

I can record and hear me recording through the computer's built in mic, but can't get the external mic and headphones to work., The preferences are set for the external mic and headphones...

I can record and hear me recording through the computer's built in mic, but can't get the external mic and headphones to work., The preferences are set for the external mic and headphones...

What operating system are you using? Is it on a Mac or a PC? Which preferences are set for external mic/headphones, Audition's or the computers?

From what I've read the new Macbook Pros do not recognize a line-in through the headphone jack. I want to record my guitar on GarageBand without using the built in mic. Any advice?

I have all the adapters and stuff like that, I have recorded a lot of things on audacity on my p.c. For $2500 you would think they would have at least kept the input through the headphone jack feature in this mac. I am using an acoustic and an eletric guitar and I don't want to spend more than about $20 to resolve this.

I had a fast tracks usb and it worked great and at $99 it is well worth it. But if you plan on recording vocal and guitar you will need a XLR plug on your mic because it only has two inputs 1/4 and XLR.
Also you don't need a multichannel interface to record multiple tracks, only multiple tracks at the same time.
If your doing all the instruments yourself the fast track or fast track pro may be a good idea for now and then when you need it upgrade to a more expensive firewire interface.
And make sure whatever you get will work with your intel mac.
I just read some of the negative comments about the fast track usb. I don't think some of these people know what there doing. Comments like it only records on the left channel shows user error.

I bought my iphone 4 through ebay and its unlocked. the problem is that my phone does not sync straight away. I sync my music file through autofill. I want to sync ringtones but its not working

i bought my iphone 4 through ebay and its unlocked. the problem is that my phone does not sync straight away. I sync my music file through autofill. I want to sync ringtones but its not working.
I saw cidya aap so i m not sure if it was jailbroken or not before but it is back to normal settings.
My problem started when I tried to sync my music files. I pressed 'sync' all it says is waiting for sync start, preparing to sync and then waiting for the changes to be applied. but it does not sync at all.
I found a way to sync my music files through autofill but I really wanted to sync ringtones but its not syncing and I really wanted to put ringtones in my phone please help.

If you see the cidya app, your iPhone is hacked with the cutsie term for this being jailbroken. This also means all the built in security has been removed making the iPhone as insecure as an android device.
Restore the iPhone with iTunes as a new iPhone or not from the backup to get rid of that hacking garbage. If the iPhone has hacked to be unlocked, the iPhone will no longer be unlocked when doing so.

Nano: Only works when directly connected to USB despite being FULLY charged

Hello all! This is my first topic/thread so I'm unsure if this is the correct spot to post this so please let me know. My issue concerns my Nano 8GB inability to play once fully disconnected from the USB/computer. This past week i noticed after having added some music that my battery indicator was on empty even after being charged for hours; i've never had charging problems with my unit before so I decide to reconnect it and let it charge overnight but to no avail. Once i remove the ipod from the computer the upper righ hand batt indicator was still showing empty; one day though the batt indicator actually had some life showing a sliver of "red" as to let me know there was some charge but a very low one so i decided on reconnecting it for another evening. Keep in mnd that despite the indicator showing empty i was able to play music/movies for a few days straight with no problems leading me to believe that its charging system was fine but that some type of glitch or software error was to blame for the indicator showing nothing.
But suddenly while listening to music the next day the ipod stopped playing and showed me a warning screen "Connect To Power" via a yellow triangle exclamation symbol right next to the BIG BATTERY symbol u get in the middle of the screen, and then shut itself off. From this point on my Ipod has not regained its ability to play independently and is confined to being connected via USB @ all times if I want to enjoy any of its content. Basically it can't run on its own anymore, however when i plug it back to the USB all my music/movies are accesible through iTunes and play w/out problems. Even when I hit "safely remove hardware" and the ipod ends synchronizing with the computer but is still hooked up to the port it will work in my hand normally without issues as it always has. It even shows me the little battery indicator on the upper right side fully green w/ the usb symbol in the middle recognizing its still hooked up to the USB port while I listen to my media; but IT MUST BE CONNECTED via USB cable for it to do anything at all once its removed all bets are off and my ipod won't work.
Also you know how after one "safely remove drive E" your Ipod basically SNOOZES if connected but not in use, well the screen that pops up is the Battery Life Screen where the BIG BATTERY symbol I saw in the WARNING Screen tells u how much u got left. Well guess what mine says whenever plugged into the USB port: CHARGED with the indicator nice and full of GREEN. But again once i remove that USB cable the ipod goes black, tells me I need to "connect to Power" and won't turn on or play music or even let me reset it; its like my Ipod has become a Phetus being kept alive by its Umbilical Cord.
I don't know if I've explained myself clearly but honestly i've been trying to read up on this type of issue EVERYWHERE but I can't seem to find any other cases like this one. I mean if its the battery wouldn't the ipod be completely unable to work even while its plugged in to the computer? This is very bizarre
an seek all the help & expertise u guys have to offer. If theres something you don't quite get please let me know and i'll try to break it down further. Thanks and i anxiously await your responses...
RECAP
Nano small battery indicator showed it was empty despite being fully charged
Nano won't work unless plugged in via USB cable
Will work perfectly through Itunes and independently but must be plugged in
Battery Indicator Screen says battery fully charged
Once unplugged Warning Screen pops up automatically, stating "Connect To Power"
which shuts off the ipod.

Yes, once I 'safely remove from drive' the ipod works normally I can listen to my media, change settings and even reset it by pressing MENU+center button. During resetting it goes straight onto the screen showing the Apple logo and then retuns back to automatically synchronizing with the computer (since its still plugged in to the usb port) and i can go into itunes and play my media via laptop. What type of servicing are you referring to? Should I try buying a new battery or sending it to apple so they can figure it out?
Two things which happened yesterday which were sorta demoralizing:
1 After unplugging my ipod from USBport the screen would automatically go black, right after I would hit the PLAY button and would get the "Connect To Power" Warning screen but under very Low Backlight before shutting itself down again. You could hardly see it, but now it doesn't pop up at all or give me any type of warning just a BLACK screen, so the only way of getting the unit to do anything is via usb connection.
2. Also the day before I had fooled my ipod into being connected to the usb even though I was pulling the usb cable very slowly from underneath its adapter; sorta letting it touch the adapter but not really hooked up to it. Well I managed to get the cable off and my Ipod to work for less than 10 seconds but I was able to scroll down the Main and Playlist menus without any lag or lack of Backlight before it went out. I tried it once more and it didn't work plus I don;t see what the benefits of doing so would be @ this point. But having said that does anyone think it could be a simple battery issue or is this harddrive related? Again the Ipod only work swhen connected to my usb & tells me its fully charged, but once unplugged it goes completely blank...

Line in / Built in Mic not working

Hello everyone. I've got an iMac G5 and for some reason it just doesn't want to accept any sound input.
The built in mic and line in both have the same behavior; no matter what I set the input volume to the bar never budges no matter how loud the sound is. The only time I even see the bar twitch is when I switch between the built in mic input and line in; sometimes I will see the bar flicker for an instant.
This problem was happening with 10.4.2 and hasn't been fixed by 10.4.3. Has anyone else experienced something like this?

Have same problem and have read entire thread. I
don't have LOGIC so could not try it. Only
difference with me is that my indicator shows input
from line and I can vary it with input source volume
controL. Just cannot hear it thru built in speaker.
Both MIDI and PREF set correctly. Need help from
anyone on this thread.
You will not hear sound automatically through your speakers. You need something to listen to the audio that is being piped in.
Try the program "LineIn" from:
http://www.rogueamoeba.com/freebies/
This should get you going.

Built in mic doesn't work on Envy X2

Hi. I have an Envy X2 running Win8. All is fine except the built in mics are not hearing anything. I have tried the obvious - checking the level in the control panel and making sure it is not muted - without any success. Where to from here?Thanks

HI. Thanks once again for following up. The hardware test initially looked promising. I ran the Quick test on the system and it came up with Processor check - software error, everything else OK. I ran the Extensive test and it pretty well immediately came up with processor OK. Then I ran the Component test on Processor and System Board, both passing OK.Strangely enough when I ran the Quick test again, the processor check came up OK One thing that may be a clue: In the Sound panel in the Control Panel, I only see one device whereas most of the help screens (eg for updating drivers) show 2. If I click on that device (Microphone: Intel SST audio device (WDM)) and then go into properties and click on the listen tab it says "You can listen to a portable music player or other device though this mirophone JACK". Should I have another device for the internal mic? (Show Disbaled Devices and Show Disconnected devices are both ticked). Another piece of info: if I plug a mic (with a stereo jack) into either of the headphone/mic sockets I hear a buzz through the speakers as I m plugging it in (just like normal when you are plugging an input device into a live sound system). However, I do not get any signal coming from the mic. (Listen to this Device is ticked)Hmmmmm. the plot thickens. Over to you, Sherlock!ThanksMax

HT1414 I have changed my Iphone once last year. My iphone has being playing up for the best part of 6 months. It Keeps deleting all my music of the phone. it freezes and will not allow me to turn it on or off. if i am in the middle of an app it will rando

I have changed my Iphone once last year. My iphone has being playing up for the best part of 6 months. It Keeps deleting all my music of the phone. it freezes and will not allow me to turn it on or off. if i am in the middle of an app it will randomly shut it down and turn the phone off totally (even if it is charged.) It will not charge properly, it has to be in a exact position to charge and even then go's off and on. I thought this my be my charger but the charger works fine on another phone. it will not allow texts to come through properly and sometimes will not not let me ring people it just freezes and i have to turn it off and on a couple of times in order for it to work. it will not let me update apps and the silent button is not silent it still go's of on ringer.The keyboard will freeze up not allowing me to type anything. It wants me to pay £126.44 for it to be repaire when i have nothing to do with why its not working!

That is correct.
That is the price of a replacement iphone once your iphone is outside of the warranty period

After using apogee duet, mac's built in mic & logic's track headers for recording are not working properly. How do I fix it?

I use logic 9
After using apogee duet for mac, I was away from my home studio without the duet and wanted to record vocals via the internal microphone on my mac book pro. (Obviously, I know it wouldn’t be the same quality. I wanted to do it as a draft, because I had a melody in my head and wanted to record it so I could remember it later.)
After opening up a project I was unable to record audio. I noticed the track headers had changed. Sometimes the “record ready” button was missing. But whether it was there or wasn’t, the same thing kept happening… After pressing the “record button” or the “record ready” button a window would pop up that said, “No input source selected!” I tried to trouble shoot by configuring track header and by going to prefereces>audio>devices>core audio, and switched the “input device” to “built in microphone,” and things like that, but I still would get the same pop up window indicating “no input source selected.” To be thorough, in preferences under “core audio,” I have selected universal track mode, 24 bit recording, and software monitoring.
Do I need to reset something?
If your recommendations help fix the immediate issue temporarily, how do I keep it from reverting back to the same problem if I feel like switching between the duet interface and the built in mic in the future? How do I keep it permanently from this malfunction? It seems like this is something simple that would be addressed.
Also, as I was trying to think of anything it could possibly be. I wonder if it could be the driver I installed for an old m-box2 possibly causing an issue. After getting my new mac book pro, I downloaded a driver for m-box2 (the second generation that came out in 2005 and used pro tools LE.) I used the m-box on my previous computer and it worked well. Since I purchased a new macbook, I tried to use it on my new computer, but since the m-box2 is a 32 bit system, it didn’t work very well, which is why I got the duet. I don’t know if that could possibly be messing anything up. If so, should I uninstall it somehow?
Thanks

Ok, think this through... you've changed from a stereo source to a mono source.
The message reads: “No input source selected!”
On the track you're trying to record there is an Input section directly underneath the I/O label. Click and hold to select the correct Input for that track.
Also, the project you opened was saved with the Duet's driver/interface parameters.. if you open the same project without the audio interface Logic will do it's best to pick I/O that's compatible but I've never seen any DAW do this perfectly.. it always takes a small amount of user input. Especially since you've changed from the Apogee to the internal mic.

Music transmitting through built-in mic, despite being played through my headphones.

Similar Messages

Maybe you are looking for