Music vanished from library after restart

Hi, normally, I’m using the Android App, but for organizing the music library I’m using the Windows application. The problem not related to any specific Spotify application, I tried all devices. If I add new music to my library (artist is “Dry Kill Logic” in this case) it shows up in my collection. I can play the songs and everything is fine. After I restart the application (or just wait some time) all but 4 songs vanish from my collection completely. This is very annoying, because I’m unable to listen to the music without going navigating through the artist’s page. The contact support page redirected me to this board. So I’m seeking for help here. Cheers

I had a similar issue with my iPhone, I deleted some listened to podcasts and my whole library vanished. I connected my iPhone to a friends computer and even though I did not synced my iPhone it looked like iTunes repaired the library and all the music came back.
Have checked if the iPad storage is full and how many songs the iPad says it has on it. Go to Settings, General, About to see amount of used space and number of songs on the device.

Similar Messages

  • Photoshop suddenly does not print to Epson 3880 - PROBLEM: Cannot print from Photoshop  After restart error message appears:  - "There was an error opening your printer. Printing functions will not be available until you have selected a printer and reopen

    PROBLEM: Cannot print from Photoshop
    After restart error message appears:
    — “There was an error opening your printer. Printing functions will not be available until you have selected a printer and reopened any documents.”
    • All print commands are greyed out and unavailable — even to call up the printer commands cannot be done.
    The printer printed fine until about 2 weeks ago when this error message appeared.  Printing continues from Pages, I-photo, preview etc. —  only Photoshop fails.
    The printer has been turned on and off, as have open documents been closed and open etc..   Preferences reset.  Repeatedly I have read through blogs and forums and attempted to contact Adobe — all without results
    Epson support struggled to find reason and several solutions were tried and they assume this is an Adobe problem.
    Running Mac Powerbook X 10.10.2 / Photoshop CS6 13.0.6.x64
    Attempting unsuccessfully to print to Epson 3880
    What Adobe support will be of help.
    Robert Darling —  2/19, 20, 21,22,23/2015

    Probably best to ask in Photoshop General Discussion
    This forum is about the Cloud as a delivery process, not about using individual programs
    If you start at the Forums Index https://forums.adobe.com/welcome
    You will be able to select a forum for the specific Adobe product(s) you use
    Click the "down arrow" symbol on the right (where it says All communities) to open the drop down list and scroll

  • Movies and music vanished from iPhone 3Gs

    Hello! I discovered today that mysteriously, all of my movies and music vanished from my iPhone 3Gs. I have not recently synced my phone or updated the software. My iMac is currently on a FedEx truck being shipped out west for a month long vacation so syncing is not an option. Also, when I try to download new stuff from iTunes, the phone tells me there's not enough space when there is plenty since all my music and movies are gone. I called Apple and essentially, I was told that they couldn't help me at this time. Has anyone else had this happen? It's incredibly frustrating as I was planning to watch movies on the plane

    Apparently, data or metadata is corrupted on your phone.  Assuming that your phone was never jailbroken or hacked, the solution is to restore in iTunes using your most recent good backup, but without your computer that's not an option.  Simply syncing with it probably won't work for the same reason you can't download, and risks replacing a previous good backup with corrupted data.
    You can try resetting, but I'm not optimistic - press both the home and sleep/wake buttons until the Apple logo appears.

  • How come calendars and contacts vanish from iPhone after upgrade to iTunes 6.1.2?

    How come calandras and contacts vanish from iPhone after upgrade to iTunes 6.1.2?

    Hi, Did you work out a fix for this?  All my calender dates (past & future) and the last 12 months of new contacts gone!!!!   And yes i too back up regularly. 
    Previously when the great 5 upgrade happened, i did loss everything, and although I was doing backups none of that info was relative in an English way. A whole life of important, unreplaceable information gone!  Never to be found.
    All of my products are apple, but it seems that little people dont matter to them, with no recourse for the damage to my personal or professional life.
    Extremly disappointed again!

  • Files missing from library after archive and install

    Hi forum folk
    any help you could give would be much appreciated.
    I can't seem to verify my permissions on HD. I have run disk utility both from finder and from my OSX startup disk and consistently get the error message "Disk Utility has lost its connection with the Disk Management Tool and cannot continue." I then reinstalled the operating system all together making sure to archive and install as well as archive previous network and preference settings. This means I am running 10.3.4 at the moment (and I can't verify any of the software updates at the moment). After reinstalling I still cannot verify my permissions, so now I am trying to back up all my files so that I can reinstall the OSX again, erase everything, and start from scratch. But I'm running into some very strange problems while doing this. select files are missing from ~/library. there is no Safari file, for example. I tried looking in HD/previous systems/library where my library files were saved before I reinstalled the operating system but there is no such folder in there either. this means all of my bookmarks are gone. additionally, under library/preferences (in both the old and new library folders) there is no file named com.apple.itunes.plst. so all of my itunes playlists are gone as well. these are the only missing files I have found thus far and i can't explain why they selectively would not have been saved after the archive and install. Everything else seems to be intact. Any ideas?
    thanks
    jb
    powerbookG4   Mac OS X (10.3.9)   running 10.3.4 at the moment - can't verify permissions on 10.3.9

    jbeep:
    my HD has a capacity of 8.85 GB available. When I reinstalled panther I had little more than 3 GB available (I deleted a bunch of unneeded things since then)
    Thanks for this update. What is the total formatted capacity of your HDD? I ask because I suspected that you might be cutting it pretty close. The rule of thumb is that you should have 10-15% of your total capacity available as free space. My personal rule is 15%-20%. This allows for more efficient perfomrance of OS X.
    I am in the process of backing up everything on my seagate combo USB 2.0/firewire 200 GB external (I am using the firewire cord)
    Having an up-to-date backup is one of the primary rules, often observed more in the breach than not. Since you have an HDD that supports Firewire, I suggest that you make a bootable clone of your entire HDD using SuperDuper. You can then use this backup as an emergency boot drive. However, it must be Firewire, as PPC Macs don't boot from USB devices.
    I also have heard that it is advisable to reinstall the OS "every now and again" and I hadn't done this for at least two years. was I ill-advised?
    Most experienced Mac users never re-install, except under dire circumstances. Since installing my new HDD in this computer I have never re-installed. Re-installation is the utlimate intrusive measure, and it exposes one to all kinds of issues, from lost data, to flawed installaton, to installations that fail midstream. Re-installation is not an effective maintenace procedure. Here are some helpful links in terms of maintenance:
    Mac OS X 10.3/10.4: System maintenance
    Macintosh OS X Routine Maintenance
    Maintaining OS X.
    I'm going to restart now and try and verify my permissions again using the procedure on the above link. I'll let you know what happens.
    Instead of verifying permissions, just go ahead and Repair Disk Permissions. Verifying permissions does nothing, and wastes your time, as it is difficult to tell whether you need to repair, and you have to repair anyway.
    Do post back with an update of your progress and any further questions or comments.
    Good luck.
    cornelius
    Message was edited by: cornelius

  • Source systems vanishes from RSA1 after renaming of the LSN after BDLS

    Dear BW/BI Experts,
               We are doing BW3.1 upgarde to BI7.0........After system copy there is need of rename of logical system for BP1 to BD1 (Prod. to Dev. and Dev. is our new Target BW system ) and From RP1 to RQ1. Before renaming I checked that all source systems were there in RSA1 i.e. Myself BW system , RP1 source system and Flat file source system as per SAP HOW TO ....System Copy in SAP Business Intelligence Systems Landscapes document. (almost 16 steps)
            But after running renaming program by BDLS , I saw source systems are vanished from RSA1..........and now I am trying to create source systems manually.........system is not allowing the same...........pl suggest...........waiting for your experts opinion......pl help urgently as I am in problem fromn last many days and did system copy more than 2 times considering that there may be system copy problem.......
    While RQ1CLNT100 creation i.e.Source system ....I am getting follwoing error.........
    Entry in outbound table already exists
    Message no. E0404
    Diagnosis
    A partner profile (outbound paramters) could be found using the following key:
    /RQ1CLNT100/LS//RSRQST////
    This relates to the key fields in table EDP13:
    RCVPRN  Partner number
    RCVPRT  Partner type
    RCVPFC  Partner function
    MESTYP  Logical message
    MESTYP  Message code
    MESCOD  Message function
    TEST    Test indicator
    Procedure
    Please check the EDI partner profiles.
    and also following error after activation..........
    Entry in inbound table not found     E0
    Entry in inbound table not found     E0
    The BW IDoc type ZSBA014 is not the same as the source system IDoc type ZSBC044     RSAR
    The following errors occurred in the source system:     RSAR
    Incorrect IDoc type ZSBA005 in the ALE definition of the source system     RSAR
    Best Regards,
    Sharad

    Hi Sharad,
    This is a very Basis-oriented task,
    can your BD1 system can communicate with your peer ECC/R3 deveopment? you might need to run sm59 to ensure your RFC connection with ECC/R3 deveopment is communicating without problem.
    once the RFC is ok, if you are familiar with WE20 and WE21 transactions, these transaction will configure IDoc setting (basis level) where you BI system will talk to, i believe IDoc are using old information copied from BP1 is still pointing to your ECC/R3 productive system at IDoc level. you will need to have Basis guy to help you out. please let me know if you need help on WE20 and 21, if you do, you need to provide me your current settings in BD1 and the peer ECC/R3 development setting as well.
    cheers

  • Fonts missing from CS6 after restarting laptop

    I've installed (and reinstalled) open-type Stone fonts on a new laptop with Windows 7x64 and CS6.  After restarting the laptop, why are the fonts gone from the list of fonts available in CS6?  I have to reinstall them each time I turn the laptop on.

    Nothing to do with Adobe. Some security tool or your system restore is removing them to retain a specific state or you do not have proper permissions to make permanent changes on your system in the first place.
    Mylenium

  • All purchased music missing from library on my mac.  can't find most files on my hd either.  help

    I switched from a computer to a mac in the fall. ever since some of the music in the library couldn't be played due to the file could not be located error.  upon getting a new iphone a couple of days ago, i now no longer have any music at all in my library, nor are the files anywhere on my hard drive.  do I have to download all previously purchased songs again?  thanks

    Time to start fresh anew, since it seems you may have really mucked up the library.
    Hold down option key while you click on iTunes. Then chose NEW LIBRARY.
    Now... re-download all past music purchases.  Should be good to go.

  • Importing music now from library--states, "Determining Gapless...

    Now I can import music to the library category. But I have to individually name every track and album.
    Then when i attempt to drage each track individually to my Ipod music, the task bar at the top of Itunes states, "Determining Gapless...." something or other and scrolls through each and every song on my Ipod.
    What is going on?
    Why can i just import music as easily as i have on other peoples computers?

    The information should be retrieved from the tags in the file. If your tags are empty that would explain not getting information filled in automatically. Would probably be easier to fill in tags before importing by using a tag editor.
    Syncing automatically is much easier than doing drag and drop. Have you tried it? Auto syncing will also update playcounts, ratings, and other changes to tags.

  • How to stop youtube videos from playing after restart

    every time I restart firefox (currently 24.1.1 or 14.0.1) any tabs with youtube videos start playing and I have to wait until after restart is complete before I can find it/them.
    is there a way to stop this?

    I don't know of a way to stop auto-play on restart only. There are some extensions that can stop auto-play in general (i.e., all the time). I haven't tried any of them myself, but it looks as though these might help:
    * [https://addons.mozilla.org/En-us/firefox/addon/smartvideo-for-youtube-mytube/ SmartVideo For YouTube]
    * [https://addons.mozilla.org/En-us/firefox/addon/stop-youtube-autoplay/ Stop YouTube Autoplay] (updated version not yet reviewed)

  • Music disappearing from playlists after sync with itunes?

    So I have a bunch of songs that I ripped from CDs or got the MP3 files from friends. I add some of them to a playlist, that's fine. But when I purchase a few songs from iTunes on my phone and add them to the playlist, they appear there temporarily. The problem happens when I sync my phone with iTunes, then all of my purchased music disappears from the playlist. It's still on my phone, but not in the playlist. Why does it do this, and how do I fix it? This is really discouraging me from using iTunes. Any help would be greatly appreciated.

    its in the name
    iphoto
    only syncs photos but u can click and drag to itunes then sync

  • Can i put music on another library after home sharing from my new laptop?

    I used home sharing to share the music, but i want to be able to add music on the other library from my new laptop
    Is there a way to do this?

    Hello shrutisk1,
    Thanks for using Apple Support Communities.
    You can use Home Sharing to transfer the music to other computers by following the directions below.
    Home Sharing is an easy way to keep all your iTunes libraries in sync across multiple computers at your house. For more information on Home Sharing and syncing your library between two computers, read iTunes: Understanding Home Sharing.
    Note: This option allows you to share music between multiple computers if you continue to use both, but it doesn't create a lasting backup. To create a lasting backup, use an external drive or CDs or DVDs.
    Home Sharing requires
    iTunes 9 or later.
    An Apple ID that is also an iTunes or App Store Account. If you need to, you can create an iTunes or App Store account without a credit card.
    An active Internet connection.
    A Local Area Network connection (Ethernet or Wi-Fi), such as one created by a router.
    Follow the steps below to use Home Sharing to copy your music between your old computer which has the music on it already, and a new computer.
    Be sure iTunes 9 or later is installed on both computers.
    Open iTunes on both computers.
    On your old computer:
    If Home Sharing is already enabled, iTunes 11 or later displays the option to Turn Off Home Sharing (Account) under the File > Devices menu. If this is the case, proceed to step 7. Otherwise, choose:
    iTunes 11 or later: File > Devices > Turn On Home Sharing from the menu bar.
    iTunes 9 or 10: Advanced > Turn On Home Sharing from the menu bar.
    Select the Home Sharing icon on the left side of iTunes from where you select music, movies, or TV shows.
    When prompted, enter your Apple ID and password.
    Click Create Home Share.
    On your new computer:
    Click the Store menu and choose Authorize computer. Enter your Apple ID and password (that was listed in the Advanced menu in step three or used in step 5).
    Choose Advanced > Turn On Home Sharing from the menu bar.
    Select the Home Sharing icon on the left side of iTunes.
    Note: Once Home Sharing is enabled, the Home Sharing option disappears from the left side of iTunes until a Home Share library is found from another computer.
    Once your new computer sees the Home Share from your old computer, click that Home Share on the left side of iTunes on your new computer.
    Select the content in the Home Share that you want to transfer to your iTunes library on your new computer, or choose Edit > Select All to choose all of it. Then, click the Import button in the bottom-right corner of iTunes.
    Wait for the content to finish transferring.
    iTunes: How to move your music to a new computer
    http://support.apple.com/kb/HT4527
    Take care,
    Alex H.

  • Ipod will not update from library after transfer from one PC to another?!?

    I recently transfered my itunes library from one PC to another using the ipod hard drive and according to the directions listed on this site. All went smooth and roughly 12GB of music transferred. After all music was successfully transfered to the library on the new PC I reconnected my ipod via USB hub and the dialog box popped up asking if I now want to associate my ipod with this new computer. I replied Yes.
    As expected the program then deleted all 3000 songs off of my ipod and was supposed to then upload all the songs from my library (all songs were checked) back onto my ipod. For some reason all that happens is it says "update complete" and no songs transfer. I now have 3000+ songs in my library and ZERO on my ipod! I've checked all the default settings to be sure it is set to automatically update, all songs are checked and the box is checked to update checked songs, etc. I've shut down and restarted my PC and even tried several different USB hubs. Also, if relevant, when I connect my ipod the computer itunes recognizes it and it shows up on the itunes screen, but just for a few seconds. After it says it has successfully updated my ipod (I wish...) the little tab which shows "Chris' ipod" then disappears and itunes acts like it doesn't even know a device is connected.
    I'm lost - I'd really appreciate any feedback anyone can provide. Thank you in advance!
    Chris
    20GB click wheel   Windows XP  

    I recently transfered my itunes library from one PC
    to another using the ipod hard drive and according to
    the directions listed on this site. All went smooth
    and roughly 12GB of music transferred. After all
    music was successfully transfered to the library on
    the new PC I reconnected my ipod via USB hub and the
    dialog box popped up asking if I now want to
    associate my ipod with this new computer. I replied
    Yes.
    As expected the program then deleted all 3000 songs
    off of my ipod and was supposed to then upload all
    the songs from my library (all songs were checked)
    back onto my ipod. For some reason all that happens
    is it says "update complete" and no songs transfer. I
    now have 3000+ songs in my library and ZERO on my
    ipod! I've checked all the default settings to be
    sure it is set to automatically update, all songs are
    checked and the box is checked to update checked
    songs, etc. I've shut down and restarted my PC and
    even tried several different USB hubs. Also, if
    relevant, when I connect my ipod the computer itunes
    recognizes it and it shows up on the itunes screen,
    but just for a few seconds. After it says it has
    successfully updated my ipod (I wish...) the little
    tab which shows "Chris' ipod" then disappears and
    itunes acts like it doesn't even know a device is
    connected.
    I'm lost - I'd really appreciate any feedback anyone
    can provide. Thank you in advance!
    Chris
    20GB click wheel  
    Windows XP  
    In iTunes Preferences, did you update the iTunes Library to the new location? In other words, are you pointing to the correct location on the new harddrive for your iTunes Library?
    Lisa

  • Paused downloads not showing in library after restarting my PC

    I was downloading windows 8.1 preview. After around 2.1 gb of downloading i paused it. I shutdown my pc and within few hours when i turned it on for restartinh the download, the file had disappeared from my downloads library. I tried restarting mozilla and pc but its not appearing in the library. The partially downloaded file is in my downloads folder with a 0 byte size. I somehow want it back in my library so that i can resume it. My current OS is windows 8 pro and firefox version is 23.0.1.

    Note that Pause and Resume can be found in the right-click context menu of an item (toolbar drop-down list).
    Do you have the .part file or only the (final) file with a byte count of 0 bytes?
    If the .part file and doesn't have the expected file size (2 GB) is missing then you won't be able to resume this download anyway. You can check the temp folder as well.

  • Problem streaming movies from library after update to 5.0.1

    Hi, I just updated my apple tv to 5.0.1 and after doing so it is unable to load/play my videos from my home library.  It starts to do it but is v...e....r...y slow to load the video, as in, 1/2 hour has passed to get ready to play a 2 minute video and it still hasn't started yet.   Purchased tv shows work fine.  Netflix streams fine.  I have restarted the apple tv, itunes, and my airport.  Please help!  Everything was working fine before the update.  I have a first gen apple tv and the most recent version of itunes.

    Try deleting the account(s) you're having problems with, resetting your phone (hold on/off and home buttons simultaneously 10-15 seconds until Apple logo appears, release buttons and wait for it to restart), then add back your mail accounts.  I've read that this has worked for some.

Maybe you are looking for