Music wont play after OS4 update

Hello People,
I updated my iPod this morning and I just noticed that I no longer have use of the music function. It loads find but closes itself after a few seconds, (4 perhaps?)
Has anyone else experienced this, is there a solution?
Regards,
David.

I resolved the issue,
1. Plug your iPod into your computer / mac
2. Allow the iPod to Sync
*_I did two things here, not sure which fixed the problem_*
3. Play a song on your iPod from your computer / Mac through iTunes.
4. Add a new song.
When I ejected my iPod the problem had gone and I could play music again.
Regards,
David.

Similar Messages

Music wont play after updating iPhone 4 to iOS 6.

After upgrdaing my iphone 4 software: my music library wont play any songs. It just skips all of them until it reaches the end of the list. I't seems that subscribing to iTunes Match will solve this problem but i dont want to pay for it. Is there any other solution that dosnt involve subscribing?

I'm having the exact same problem! Only some of my songs are on there. Like it will show that the song is there but the content is not. It keeps skipping until it finds a song that actually downloaded. I've restored my phone twice since upgrading to ios6 and nothing helps. I hate this update and wish I never did it.

Music not playing after IDT update last night (HP automated update) How can I roll the patch back?

I was notified of an HP update last night. After the update completed, Itunes/MS media player/You-Tube....applications are unable to play. Checked Installed programs and the only update listed was one for IDT drivers. How can I roll back to the previous version?
This question was solved.
View Solution.

I had the same issue, after reading several other posts with the same issue, I restored to before Oct 29th. Now my sound works just fine and my games that were also going hinky started to work as well.
It would be nice if HP fixed this issue before sending up another update. It is very annoying to have undo what they did so my computer works correctly.

Music on my iPhone 3gs wont play after I updated to 5.0 software today

I did the update it offered in itunes when i connected my iphone 3gs today, all went well. Now I see my music but I cant hear it, its not highlighted so that when I click a song it can play. Anyone have any idea whats up?

Check this and see if you have your music there. Or check wherever you have you rmusic stored.
I've never heard of an iOS device update that deleted the music in iTunes.

Music wont play after pause

I have a little issue with mpd+ncmpcpp.
When i start a song, and then pause it, if i want to listen to youtube fx. when i then wanna hear the music again it wont start.
When i start a song, it says playing for about 1 second, then just change back to pause. To make it work i have to logout and in again, or reboot. It's really annoying. Do any of you have an answer to this?

Here you go, my mpd.conf file
# An example configuration file for MPD
# See the mpd.conf man page for a more detailed description of each parameter.
# Files and directories #######################################################
# This setting controls the top directory which MPD will search to discover the
# available audio files and add them to the daemon's online database. This
# setting defaults to the XDG directory, otherwise the music directory will be
# be disabled and audio files will only be accepted over ipc socket (using
# file:// protocol) or streaming files over an accepted protocol.
music_directory "/mnt/windows/Musik"
# This setting sets the MPD internal playlist directory. The purpose of this
# directory is storage for playlists created by MPD. The server will use
# playlist files not created by the server but only if they are in the MPD
# format. This setting defaults to playlist saving being disabled.
playlist_directory "/var/lib/mpd/playlists"
# This setting sets the location of the MPD database. This file is used to
# load the database at server start up and store the database while the
# server is not up. This setting defaults to disabled which will allow
# MPD to accept files over ipc socket (using file:// protocol) or streaming
# files over an accepted protocol.
db_file "/var/lib/mpd/mpd.db"
# These settings are the locations for the daemon log files for the daemon.
# These logs are great for troubleshooting, depending on your log_level
# settings.
# The special value "syslog" makes MPD use the local syslog daemon. This
# setting defaults to logging to syslog, otherwise logging is disabled.
log_file "/var/log/mpd/mpd.log"
error_file "/var/log/mpd/mpd.error"
# This setting sets the location of the file which stores the process ID
# for use of mpd --kill and some init scripts. This setting is disabled by
# default and the pid file will not be stored.
pid_file "/var/run/mpd/mpd.pid"
# This setting sets the location of the file which contains information about
# most variables to get MPD back into the same general shape it was in before
# it was brought down. This setting is disabled by default and the server
# state will be reset on server start up.
state_file "/var/lib/mpd/mpdstate"
# General music daemon options ################################################
# This setting specifies the user that MPD will run as. MPD should never run as
# root and you may use this setting to make MPD change its user ID after
# initialization. This setting is disabled by default and MPD is run as the
# current user.
user "mpd"
# This setting sets the address for the daemon to listen on. Careful attention
# should be paid if this is assigned to anything other then the default, any.
# This setting can deny access to control of the daemon.
# For network
bind_to_address "any"
# And for Unix Socket
#bind_to_address "~/.mpd/socket"
# This setting is the TCP port that is desired for the daemon to get assigned
# to.
port "6600"
# This setting controls the type of information which is logged. Available
# setting arguments are "default", "secure" or "verbose". The "verbose" setting
# argument is recommended for troubleshooting, though can quickly stretch
# available resources on limited hardware storage.
log_level "default"
# If you have a problem with your MP3s ending abruptly it is recommended that
# you set this argument to "no" to attempt to fix the problem. If this solves
# the problem, it is highly recommended to fix the MP3 files with vbrfix
# (available from <http://www.willwap.co.uk/Programs/vbrfix.php>), at which
# point gapless MP3 playback can be enabled.
gapless_mp3_playback "yes"
# This setting enables MPD to create playlists in a format usable by other
# music players.
save_absolute_paths_in_playlists "no"
# This setting defines a list of tag types that will be extracted during the
# audio file discovery process. Optionally, 'comment' can be added to this
# list.
metadata_to_use "artist,album,title,track,name,genre,date,composer,performer,disc"
# Symbolic link behavior ######################################################
# If this setting is set to "yes", MPD will discover audio files by following
# symbolic links outside of the configured music_directory.
follow_outside_symlinks "yes"
# If this setting is set to "yes", MPD will discover audio files by following
# symbolic links inside of the configured music_directory.
follow_inside_symlinks "yes"
# Zeroconf / Avahi Service Discovery ##########################################
# If this setting is set to "yes", service information will be published with
# Zeroconf / Avahi.
#zeroconf_enabled "yes"
# The argument to this setting will be the Zeroconf / Avahi unique name for
# this MPD server on the network.
#zeroconf_name "Music Player"
# Permissions #################################################################
# If this setting is set, MPD will require password authorization. The password
# can setting can be specified multiple times for different password profiles.
#password "password@read,add,control,admin"
# This setting specifies the permissions a user has who has not yet logged in.
#default_permissions "read,add,control,admin"
# Input #######################################################################
input {
plugin "curl"
# proxy "proxy.isp.com:8080"
# proxy_user "user"
# proxy_password "password"
# Audio Output ################################################################
# MPD supports various audio output types, as well as playing through multiple
# audio outputs at the same time, through multiple audio_output settings
# blocks. Setting this block is optional, though the server will only attempt
# autodetection for one sound card.
# See <http://mpd.wikia.com/wiki/Configuration#Audio_Outputs> for examples of
# other audio outputs.
# An example of an ALSA output:
audio_output {
type "alsa"
name "My ALSA Device"
device "hw:0,0" # optional
format "44100:16:2" # optional
mixer_device "default" # optional
mixer_control "PCM" # optional
mixer_index "0" # optional
# An example of an OSS output:
#audio_output {
# type "oss"
# name "My OSS Device"
## device "/dev/dsp" # optional
## format "44100:16:2" # optional
## mixer_device "/dev/mixer" # optional
## mixer_control "PCM" # optional
# An example of a shout output (for streaming to Icecast):
#audio_output {
# type "shout"
# encoding "ogg" # optional
# name "My Shout Stream"
# host "localhost"
# port "8000"
# mount "/mpd.ogg"
# password "hackme"
# quality "5.0"
# bitrate "128"
# format "44100:16:1"
## protocol "icecast2" # optional
## user "source" # optional
## description "My Stream Description" # optional
## genre "jazz" # optional
## public "no" # optional
## timeout "2" # optional
# An example of a httpd output (built-in HTTP streaming server):
#audio_output {
# type "httpd"
# name "My HTTP Stream"
# encoder "vorbis" # optional, vorbis or lame
# port "8000"
## quality "5.0" # do not define if bitrate is defined
# bitrate "128" # do not define if quality is defined
# format "44100:16:1"
# An example of a pulseaudio output (streaming to a remote pulseaudio server)
#audio_output {
# type "pulse"
# name "My Pulse Output"
## server "remote_server" # optional
## sink "remote_server_sink" # optional
## Example "pipe" output:
#audio_output {
# type "pipe"
# name "my pipe"
# command "aplay -f cd 2>/dev/null"
## Or if you're want to use AudioCompress
# command "AudioCompress -m | aplay -f cd 2>/dev/null"
## Or to send raw PCM stream through PCM:
# command "nc example.org 8765"
# format "44100:16:2"
## An example of a null output (for no audio output):
#audio_output {
# type "null"
# name "My Null Output"
# This setting will change all decoded audio to be converted to the specified
# format before being passed to the audio outputs. By default, this setting is
# disabled.
#audio_output_format "44100:16:2"
# If MPD has been compiled with libsamplerate support, this setting specifies
# the sample rate converter to use. Possible values can be found in the
# mpd.conf man page or the libsamplerate documentation. By default, this is
# setting is disabled.
#samplerate_converter "Fastest Sinc Interpolator"
# Volume control mixer ########################################################
# These are the global volume control settings. By default, this setting will
# be detected to the available audio output device, with preference going to
# hardware mixing. Hardware and software mixers for individual audio_output
# sections cannot yet be mixed.
# An example for controlling an ALSA, OSS or Pulseaudio mixer; If this
# setting is used other sound applications will be affected by the volume
# being controlled by MPD.
#mixer_type "hardware"
# An example for controlling all mixers through software. This will control
# all controls, even if the mixer is not supported by the device and will not
# affect any other sound producing applications.
#mixer_type "software"
# This example will not allow MPD to touch the mixer at all and will disable
# all volume controls.
#mixer_type "disabled"
# Normalization automatic volume adjustments ##################################
# This setting specifies the type of ReplayGain to use. This setting can have
# the argument "album" or "track". See <http://www.replaygain.org> for more
# details. This setting is disabled by default.
replaygain "album"
# This setting sets the pre-amp used for files that have ReplayGain tags. By
# default this setting is disabled.
#replaygain_preamp "0"
# This setting enables on-the-fly normalization volume adjustment. This will
# result in the volume of all playing audio to be adjusted so the output has
# equal "loudness". This setting is disabled by default.
#volume_normalization "no"
# MPD Internal Buffering ######################################################
# This setting adjusts the size of internal decoded audio buffering. Changing
# this may have undesired effects. Don't change this if you don't know what you
# are doing.
audio_buffer_size "2048"
# This setting controls the percentage of the buffer which is filled before
# beginning to play. Increasing this reduces the chance of audio file skipping,
# at the cost of increased time prior to audio playback.
buffer_before_play "10%"
# Resource Limitations ########################################################
# These settings are various limitations to prevent MPD from using too many
# resources. Generally, these settings should be minimized to prevent security
# risks, depending on the operating resources.
connection_timeout "60"
max_connections "10"
max_playlist_length "16384"
max_command_list_size "2048"
max_output_buffer_size "8192"
# Character Encoding ##########################################################
# If file or directory names do not display correctly for your locale then you
# may need to modify this setting. After modification of this setting mpd
# --create-db must be run to change the database.
filesystem_charset "UTF-8"
# This setting controls the encoding that ID3v1 tags should be converted from.
id3v1_encoding "ISO-8859-1"

IPhone 4 - Music not playing after iOS5 Update

It says/shows it's playing but no sound is coming out and when a song does play it has the wrong song on screen. Help!

http://www.iosappadvice.com/forum/fix-music-not-working-bug-in-ios-5-beta-7/
There's the solution. Apparently a bug in the beta and public releases.

Alot of my music wont play after getting ios7

can anyone help me out with this?

Try to unsync all of the music and then resync it.

After i publish my website the music wont play.

After i publish my website the music wont play. It just shows a question mark. I have updated the quick time software but it's still not working. It use too but one day it just stopped. I have it on autoplay but still nothing. Please help!!

Are you referring the the small ? at the bottom of the page under this graphic: , ?
It appears that the audio file is in the footer of the page. Move it into the bottom of the body and see if it will display and play correctly.

HT5262 I've updated to iOS 6 and now my music wont play in my Audi - anyone else had this problem?

I've updated to iOS 6 and now my music wont play in my Audi - anyone else had this problem?

What do you mean by "on the days that should be marked"? Are you calendar events displayed on the wrong days?

I did the new update and now my music wont play through speakers

help I did the update and now music wont play or text sounds dont work

Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
*Don't make any changes on the Safe mode start window.
*https://support.mozilla.com/kb/Safe+Mode
*https://support.mozilla.com/kb/Troubleshooting+extensions+and+themes

My music will not play after it gets to a certain volume. It works fine if i turn it up loudly however when i turn it down past a point it will not work and the music wont play.

My music will not play after it gets to a certain volume. It works fine if i turn it up loudly however when i turn it down past a point it will not work and the music wont play.

If in settings, music, volume limit is off then restart your phone first. Hold the home and off button down until the apple symbol comes up.

ITunes and Genius, purchased music wont play now

after installing iTunes Genius, my purchased music wont play now. it gets skipped over in normal play mode. the box next to selection has the "check". album artwork still shows up when song is highlighted.

Check these out:
Songs That Skip On iPod
iPod Does Not Play Content from iTunes Music Store
I hope this helps!

I deleted bonjour in error, now my music wont play ?

I deleted bonjour in error, now my music wont play ? Do I need this to play music ? If so how do I re install ?
Thanks

- Did you update the iPod?
- Try the following:
- Reset. Nothing will belost
Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Restore from backup
- Restore to factory defaults/new iPod.

HT1386 My purchased music wont play on the iphone

My purchased music wont play on the phone even after syncing it with itunes. Only the music that I loaded into itunes from CD will play on the phone. I've tried everything to sync and reload the phone library!!! Now what?

Consider yourself lucky! I have been unable to disable music on my iphone. Let's trade phones!

When i dont have service my music wont play even if stored on my phone

Most of my music is stored in icloud with itunes match. I know that i can only listen to songs that i have downloaded from icloud to my phone when i have no service. I noticed last night at the gym that i can get through one song and after that my downloaded music wont play. I have to reset my phone before more songs will play. Any help would be greatly appreciated.

look in the headphone jack, if there is a red light.
When the red light is on it is in a digital mode, there is a switch in there that sometimes gets stuck.
Try a tooth pick, or a Q tip with the tip cut off and gently wiggle it around in there.

Music wont play after OS4 update

Similar Messages

Maybe you are looking for