Musical keyboard connection assistance.

Would anyone know how to receive sound from a musical keyboard, with the connection of an AUX cord? I have the required 1/8" adapter for my laptop and the aux cord for the keyboard port, yet no sound from either source. My laptop is acting as though it is connected with headphones and vice versa from my laptop.

Elleite wrote:
My laptop is acting as though it is connected with headphones and vice versa from my laptop.
if your laptop has only a single jack for input and output, you need to select which it is used for in System Prefs

Similar Messages

ITouch 4 connect with USB/MIDI Music/keyboard not working .

!Sorry for my very bad english !!
hello ,
I have problem with connect my - iTouch 4 (os: 4.3.3 ) with AKAI musical keyboard
LPK25 / USB-MIDI controller - not working. not function. not sound ..
1/ when i use my LPK25 Midi Keyboard   connect with my PC   (WIN XP )
with standard cable USB - and Musical Software , it is OK. NO problem
USB/MIDI   interface LPK to PC ok. I play like piano ..synthe...
2/ when i use my iTOUCH4 ( os: Firm 4.3 )   connected with my Akai LPK25 Keyboard :
- cable : 30 pin (side iTouch4 ) and   miniUSB (side AKAI LPK25)
- Musical software Music Midi   iTouch : Music Studio, Nano Studio, or Soft SyntheStation *
Not function. NOT working. no possible play , not sound.
No possible use this keyboard in USB/MIDI connexion ,
I confirm : * this Apps : Music   are Itouch apps of ITunes Store WITH   function MIDI in setup !,
i active Midi in setup .... but never sucess..
QUESTION : wy iTOUCH4 not accept this connexion ?
Thank you for your assistance.

hi, thank you.
AKAI (manufacturer USB/MIDI Keyboard LPK25 ) web site AKAI   write " goto iTunes "
for download App SynthStation   Iphone/iTunes ..
but no function .
I have send mail to AKAI /Service !!!! no news ...
gertou

Hello. i have a musical keyboard which is yamaha psr e433 and i want to connect it to my macbook pro. please help me give the name of the connector so i can use it for my band. thank you. your help is much appreciated.

hello. i have a musical keyboard which is yamaha psr e433 and i want to connect it to my macbook pro. please help me give the name of the connector so i can use it for my band. thank you. your help is much appreciated.

hello. i have a musical keyboard which is yamaha psr e433 and i want to connect it to my macbook pro. please help me give the name of the connector so i can use it for my band. thank you. your help is much appreciated.

Connecting Casio ctk 900 music keyboard to macbook, garageband 3 can I ?

Connecting Casio Ctk 900 music keyboard to macbook, garageband 3 can I ?
Can I? Are they compatible???
I can connect to windows but this is not much help.
I hope someone with Casio Keyboard and Mac reads this!!
Thanks

You can record the audio output of the keyboard - i.e. its own sounds - by plugging the output to the line in of your Mac (if it has one) or to a suitable audio-USB interface.
You can use the keyboard to drive GarageBand - using GB's own sounds - by plugging the MIDI output (a round socket with five smaller sockets within it in a semicircle) into a suitable MIDI-SUB interface.
This keyboard, according to the published specs, does not have a USB connection so the problems about compatibility do not arise. (Casio keyboards with a USB connection for MIDI notoriously don't work with Macs). The incompatibility mentioned in the previous post concerns the transfer of programs and MIDI files to the keyboard rather than using the keyboard as a MIDI source.
There are a number of suitable interfaces around, such as those made by Edirol.

How to connect to a yamaha PSR-E423 music keyboard

How do I download songs from my mac to a Yamaha PSR-E423 music keyboard. I have in stalled the drivers but now what?

Yes I did both aforementioned activities and Mac does recognise it as a USB device but there is no method to transfer midi files from supplied cd to Yamaha PSR-E423. It does not show up as a Folder to drag files into like the Windows version in the manual. Thanks for responding.

Garageband compatibility with yamaha music keyboard psr e403

Hello I hope you can help.
I am new to Garageband and making music.
I am looking to get a Yamaha Music Keyboard psr e403
Will this work with Macbook?
With Garageband especially??
I am using a macbook.
I have posted before, but got no answers, and had a look at forums and yamaha website but I haven't got a clear answer.
Will I need to buy any extra cables?
I want to order any extras now so that when I get my Keyboard I am ready to go.
Thanks

Musicalmike,
I am trying to connect the psre403 to the mac via usb. I downloaded the driver, and installed it, but still not recognizing the midi/usb input to the mac. I looked in the AudioMidi utility to try to set it up there, but didn't recognize the keyboard. Garageband sees 0 midi devices. I tried changing various settings on the keyboard and only succeeded in getting no sound anywhere.
Help, please, any one - 5 days to Christmas and I am trying to get this ready to go for my son!

Casio keyboard connection through 3.5mm jack

Just got new imac 27 inch, trying to connect a casio ctk 1100 musical keyboard through the 3.5mm input jack on the back, it seems to register in the sound preference screen but no sound is heard through the imac speakers, i want to use it with garageband but this doesent see the keyboard, am i missing something here or do i need some sort of input device, the keyboard only has a 3.5mm output jack. thanks

When the keyboard is connected and you go to System Preferences->Sound; Input you have Line IN selected as your input correct?
Now when you hit a key on the keyboard does the input level display light up? Do you have input volume turned up? Is there a volume control on the keyboard?
How are the inputs in Garage Band (Garage Band->Preferences->Audio/MIDI) set?
Message was edited by: Frank Caggiano - BTW the keyboard output does work ok if plugged into another device, say headphones?

Any requirements of Musical keyboard for mac

Any requirements of Musical keyboard for mac?
Can I use the Midi to USB cable to connect the keyboard to iMac?

What is "the midi to USB cable"? If it is a working midi interface, you can plug any midi capable keyboard into it.

I cannot play music when connect to stereo via 30-pin connector. Help?

Since I first upgraded my iPod Touch 2nd Gen to iOS 4.x, I cannot play music when connect to external speakers via the 30-pin connector. I've tried several different speaker systems, but none work. My iPod freezes after making my song selection and doesn't do anything until after rebooting. Even then, it just goes through the same cycle if I select another song. My iPod is 100% functional until I try to plug it in to an external speaker system.
Keep in mind that it worked up until iOS 3.1.3.

Sounds like iOS 4 broke the compatibility with your accessory, something that sometimes happens with major OS changes. Your only hope is to see if the accessory manufacturer has an update to make it compatible with iOS 4, or downgrade your Touch back to 3.1.3.

Direct access network connectivity assistant, the update is not applicable

Been testing DirectAccess for a couple of weeks now, and all seemes to be working fine. But now it want to install the DA connectivity assistant but it fails to install. When searching for updates on this computer it gives an error message as seen in the
screenshot below .
I've reinstalled Windows , updated windows, removed the virus scanner, checked if the update was already installed. Nothing worked
OS = Windows 7 Enterprise N
Windows update log appears
2013-11-15 09:54:11:265
912 1290
Report CWERReporter finishing event handling. (00000000)
2013-11-15 09:54:42:534
912 1290
Report CWERReporter finishing event handling. (00000000)
2013-11-15 09:54:56:188
4736 984
COMAPI ----------- COMAPI: IUpdateServiceManager::RemoveService -----------
2013-11-15 09:54:56:188
4736 984
COMAPI - ServiceId = {f8fc7b4b-f693-4113-ab5f-137e03025faa}
2013-11-15 09:54:56:609
4736 984
COMAPI ISusInternal::DisconnectCall failed, hr=8024000C
2013-11-15 09:54:56:625
4736 984
COMAPI waiting for worker thread to complete
2013-11-15 09:54:56:625
4736 984
COMAPI Removed OnCompleted callback from GIT (cookie=256)
2013-11-15 09:54:56:625
4736 984
COMAPI IUpdateService removing volatile scan package service, serviceID = {F8FC7B4B-F693-4113-AB5F-137E03025FAA}
2013-11-15 09:54:56:641
912 1334
Agent WARNING: WU client fails CClientCallRecorder::RemoveService with error 0x80248014
2013-11-15 09:54:56:656
4736 984
COMAPI WARNING: ISusInternal::RemoveService failed, hr=80248014

Hi,
Firstly, I would like to confirm with you if it worked before on Windows 7 Enterprise N version.
As I known, following are some additional features that Windows 7 Enterprise N edition has and other versions does not have:
a. Direct Access
b. Branch cache
c. Federated search
You need to meet the following requirements to install the DA connectivity assistant.
Windows 7 Enterprise, Windows 7 Ultimate
1. 10 MB of disk space.
2. 10 MB of RAM.
3. Microsoft Word or Microsoft Word Viewer (available as a free download) can be used to view Word documents.
I would like to suggest you download and install it from official website.
Microsoft DirectAccess Connectivity Assistant 2.0
http://www.microsoft.com/en-us/download/details.aspx?id=29039
Hope it helps.
Regards,
Blair Deng
Blair Deng
TechNet Community Support

DirectAccess Connectivity Assistant DTE Tunnel Settings

I am trying to setup the DirectAccess Connectivity Assistant per the Solution Accelerator "Deploying, Managing, and Using the Microsoft DirectAccess Connectivity Assistant".
Does anyone know where to find the DTE Tunnel IPv6 Addresses?
DTE
Type: A collection of IPv6 addresses that each identify a DirectAccess server.
Default: None
Description: Specifies the dynamic tunnel endpoints (DTEs) of the IPsec tunnels that enable DirectAccess. It is through these tunnels that the DCA attempts to access the resources that are specified in the CorporateResources setting. By default, the DCA uses the same DirectAccess server that the DirectAccess client computer connection is using. In default configurations of DirectAccess, there are typically two DTEs, one for the infrastructure tunnel, and one for the user tunnel. You should configure one DTE for each tunnel. Each entry consists of the text PING: followed by the IPv6 address, for example: PING:2001:3039::0001.
Important
If your DirectAccess configuration uses the Full Intranet Access or Selected Server Access models, where IPsec tunnel mode is used to connect to the DirectAccess infrastructure servers, and a separate IPsec transport mode tunnel is used to access shared resources that are required by the user, configuring one or more servers in the DTE setting is required.

Thanks for the info Jason....
Here is a sterilized output just for documentation purposes, using the
netsh advfirewall monitor show mmsa command.
DTE's are in bold below.
Main Mode SA at 03/01/2010 14:19:58
Local IP Address:                     2002:1122:3344:1:8828:3653:7eed:552
Remote IP Address:                    2002:1122:3355::1122:3355
Auth1:                                ComputerCert
Auth2:                                UserNTLM
MM Offer:                             None-AES128-SHA256
Cookie Pair:                          1cbfa87cf25f4e0e:1e9f969cc6590d6a
Health Cert:                          No
Main Mode SA at 03/01/2010 14:19:58
Local IP Address:                     2002:1122:3344:1:8828:3653:7eed:552
Remote IP Address:                    2002:1122:3355::1122:3355
Auth1:                                ComputerCert
Auth2:                                UserNTLM
MM Offer:                             None-AES128-SHA256
Cookie Pair:                          6fe5434eaf1664d3:73a42501b324bd02
Health Cert:                          No
Main Mode SA at 03/01/2010 14:19:58
Local IP Address:                     2001:0:d893:b568:3c8b:3fb8:e78b:2ee
Remote IP Address:                    2002:1122:3355::1122:3355
Auth1:                                ComputerCert
Auth2:                                UserNTLM
MM Offer:                             None-AES128-SHA256
Cookie Pair:                          c667efb69e1f79ae:18399b196e8f9c9f
Health Cert:                          No
Main Mode SA at 03/01/2010 14:19:58
Local IP Address:                     2002:1122:3344:1:8828:3653:7eed:552
Remote IP Address:                    2002:1122:3377::1122:3377
Auth2 Local ID:                       DOMAIN\user1
Auth2 Remote ID:                      host/UAG1.domain.com
Auth1:                                ComputerCert
Auth2:                                UserKerb
MM Offer:                             None-AES128-SHA256
Cookie Pair:                          0238a259333a0970:a9d2ed78a4a546d0
Health Cert:                          No
Ok.

Wireless keyboard connected but can't type in password

I updated from an iOS 10.8 to 10.9 recently after my hard drive crashed and had to get replaced. I have connected the wireless keyboard connected but I can't type in certain key letters. I can only type in numbers and the middle set of letters. The other letters which I can't type into as my password.

Hello amandateavy,
It sounds like your bluetooth keyboard is connected but only some of the keys on it work. I recommend starting by performing a PRAM reset, and then booting to Safe Boot:
About NVRAM and PRAM
http://support.apple.com/kb/ht1379
Resetting NVRAM / PRAM
Shut down your Mac.
Locate the following keys on the keyboard: Command (⌘), Option, P, and R. You will need to hold these keys down simultaneously in step 4.
Turn on the computer.
Press and hold the Command-Option-P-R keys before the gray screen appears.
Hold the keys down until the computer restarts and you hear the startup sound for the second time.
Release the keys.
After resetting NVRAM or PRAM, you may need to reconfigure your settings for speaker volume, screen resolution, startup disk selection, and time zone information.
And:
OS X: What is Safe Boot, Safe Mode?
http://support.apple.com/kb/ht1564
To start up into Safe Mode (to Safe Boot), follow these steps.
Be sure your Mac is shut down.
Press the power button.
Immediately after you hear the startup tone, hold the Shift key.
The Shift key should be held as soon as possible after the startup tone, but not before the tone.
Release the Shift key when you see the gray Apple logo and the progress indicator (looks like a spinning gear).
After the logo appears, you should see a progress bar during startup. This indicates that your computer is performing a directory check as part of Safe Mode.
To leave Safe Mode, restart your computer without holding any keys during startup.
Thank you for using Apple Support Communities.
Take care,
Sterling

Garageband - "System Overload. The audio engine was not able to process all required data in time. (-10011). Im making a song on Garageband and I have recorded guitar, drums recorded on the musical keyboard, and vocals. It now says this, and won't play.

Im making a song on Garageband and I have recorded guitar, drums recorded on the musical keyboard, and vocals. It now says this, and won't play. Ive worked so hard on this and I don't know how to fix it. I am not very skilled or knowledgable in computers and barely know how to operate Garageband as it is. I have many different tracks in this song for different drums and beats. Please someone tell me how to fix this, I'm not even finished it! And again I am not very informed on how to work computers as well as most of you are, just saying. thanks!!!
P.S.: In my about this mac thing, it says i have version 10.9.1, 2.26 GHz Intel Core 2 Duo, and Memory is 2 GB 1067 MHz DDR3

Could you do this?
Go to Finder
Go to Applications
Go to Utilities folder
Launch Activity Monitor app
go to its Memory tab on top
tell us what you see at the very bottom?
Here is a sample of mine.
I bet your page/swap amount will be huge.
If there is not enough RAM, OS X temporarily stores RAM data on the harddrive and tries to retrieve it back into RAM when needed, unfortunately that is so slow that GB throws an error as it cannot play it all in real time.

When my MyBook external drive (where I keep my music) is connected to my Mac, iTunes stops responding upon startup. I have to force quit iTunes, disconnect the iBook, restart iTunes and plug the iBook back in.

When my MyBook external drive (where I keep my music) is connected to my Mac, iTunes stops responding upon startup. I have to force quit iTunes, disconnect the iBook, restart iTunes and plug the iBook back in.

mattbeardall wrote:
Is there an option that someone knows about that would keep this from happening?
no, if iTunes can't find its drive/folder, it defaults to creating one within your Home directory's Music folder.
If anyone knows a way I send a product suggestions to apple please let me know, as I have a few that would like to suggest.
under the iTunes menu choose the Feedback menuItem.

VPN Connection assistant (VPNUK via OpenVPN) cannot change network connection

I have an issue with using my VPN assistant via VPNUK.net.
The connection assistant will update the VPN connection with a new server IP and connection configuration based on what you select in the application.
There is no error specifically about the settings, but when trying to establish a connection im told that the connection failed. I then manually check the VPN in network connections and the new settings are not applied.
I suspect that the application does not have access to change the network settings, even if i run as administrator.
Are there any other privileges i need to set? Only a problem in windows 10.
Cheers
Mark

Hi Mark,
My name is Adam and I am with the Windows Beta Networking support team. I would recommend running procmon (click
here
for download link) when reproducing the behavior. You can then filter on the VPNUK process and scan for any status results such as Access Denied.
Do you get any error messages or warnings logged in event viewer at all?
Have you also engaged with VPNUK to see if they have seen issues with their client when installed on Windows 10 Preview?
Regards,
Adam Rudell | Sr Support Engineer | Windows Beta | Microsoft Corporation

Musical keyboard connection assistance.

Similar Messages

Maybe you are looking for