Musical Logic Pro Task Bar with Apogee Ensemble

1.)Since I installed the Apogee Ensemble unit, a musical note sounds when I start up my MAC, when I press the Start or Stop button in Logic Studio, etc. What option do I need to reset to turn this off?
2.) When I use Input 1 on my Emagic AMT Midi interface unit and press any key on the external MIDI keyboard, the screen starts flashing until I select the close song option. What feature is causing this, and how can I turn it off?
Thank you

This was due to a bad fader on my Mackie MCU Pro. I installed this at the same time as the Apogee unit. Mackie sent me a new fader, and once I replaced this both problems were resolved.

Similar Messages

Minimize to Icon in task bar with shell32.dll

is it possible to minimize a lv.exe file to the task bar with shell32.dll
if it is possible please post an example here.
labview 7.1
thanks
helmuth

chilly charly wrote:
This functionnality is offered by the LVWutil32 library. See here
Edit : after reading Tst reply, I'm not sure I understood correctly the question
Message Edité par chilly charly le 05-21-2006 11:34 AM
LabVIEW
windows get minimized to the taskbar automatically when you allow them
to be minimized and the user clicks the third icon from the top right,
or you can do it programmatically in newer LabVIEW versions by setting
the minimzed state. What this guy meant was that he wants to minimize
to the system tray which is a very different thing than the taskbar ;-)
I answered with two possible Toolkits in another thread to do this.
Doing it yourself with shell32 functionality is rather thirty work
since it involves callback functions and quite some infrastructure
around that to really work well. Nothing for someone not quite seasoned
in C programming.
Rolf Kalbermatter
Message Edited by rolfk on 05-22-2006 11:04 AM
Rolf Kalbermatter
CIT Engineering Netherlands
a division of Test & Measurement Solutions

I purchased a powermac pro and it came with logic Pro 9 (but with out the additional suite of programs that comes with). How can I reregister or reinstall Logic Pro 9 to get those features?

I could really use some insight into this please also how many gigs of RAM should my power mac have it only has two right now and logic tends to glitch up majorly.

My original question :
I purchased a powermac pro and it came with logic Pro 9 (but with out the additional suite of programs that comes with). How can I reregister or reinstall Logic Pro 9 to get those features?

Does Logic Pro 9 work with Mountain Lion?

Hey!
I was wondering...
My computer has Snow Leopard installed and i would really like to get Mountain Lion. BUT there is a problem... I don't know if Logic Pro 9 will with Mountain Lion. Can anybody help me with it? And also does Logic Pro 8 and the microsoft pack (word, powerpoint, excel etc. 2011) work too? Please help me if you know it
THANK YOU
Cheers
- Kufax

Since I'm not in the middle of anything critical and have multiple backups, I decided to take the plunge and upgrade. I've only been running for an hour or so, but here's where I am:
2008 MacPro, 8x2.8Ghz, 16Gb RAM. SSL MADI PCIe card for I/O. Logic 9.1.7
Tested with a couple of recent, decent size projects (40+ tracks, VIs and plugins). Not seeing any perormance differences.
Working:
- Euphonix MC Mix
- UAD2 Duo
- Spectrasonics Omnisphere
- NI Komplete 8
- Waves 9
- Soundtoys 4
- Wallander Instruments
- EW Play
- Melodyne
NOT Working:
- Access Virus TI. Plugin opens but cannot connect to Virus. I am running the latest stable v4 release - I will try installing the v5 public Beta and report back. This is a deal breaker so if I cannot get it working I will roll back to Lion
- SSL Duende Native. Authorization is failing. Possibly a CodeMeter issue or just authorizations lost during upgrade - will look at this next.
Make sure you are running the latest iLok driver - there was one released a few days ago.
More as it develops.

Will Logic Pro 8 Work with OSX 10 .7.5

Is Logic Pro 8 compatable with LION on a Mac Book Pro ?
2.33 GHz Intel Core 2 Duo
Memory 2 GB
Thanks for your help.

CCTM wrote:
Hi
Logic 8.0.2 runs fine in Lion. The installer on the original dvd's will not run however, so you would need to install it using Pacifist.
CCT
edit
2G of RAM is a bit low.
2 GB is a bit lean, but LP 8 should be OK-ish with it. I used to run LP 8 on a G4 with only 1.8 GB. I would recommend the OP to install Menumeters, to keep an eye on RAM use. I ran Tiger (10.4.11), Lion probably has a bigger RAM footprint. If at all possible, go to 4 or even 8 GB.

CAN LOGIC PRO X WORK WITH WIN 7 OS 64 BIT

IS LOGIC PRO X COMPATABLE WITH WIN 7 64 BIT

No. It runs on OS X only.
Please stop typing in caps. It is considered shouting on the web and is also more difficult to read.
Allan

Is Logic Pro X compatible with my Apollo Twin?

Is Logic Pro X compatible with Apollo Twin?

The question is: Is Apollo Twin "Core Audio" compatible.
Logic uses OSX's core audio system so if the Apollo has Core Audio drivers that are compatible with the version of OSX you're using then Logic will see the Apollo Twin as an available audio device you use. This is done using Logic's built-in Audio preference selection.

Is Logic Pro X compatible with Digi 002?

Is Logic Pro X compatible with Digi 002?

It s a problem for me to upgrade from my late 2007 macbook Core2Duo 2,16ghz system running snow leopard and protools 7.4.2 through digi 002 rack, Command 8 and emagic Unitor 8mk2, to my new macbook pro i5 2,5ghz...
I chose this MBP cos it has both firewire and thunderbolt BUT... people told me digi 002 would only work as a 16 input channels. No way to use the ADAT inputs from the digi... And to me it s the most important thing : i need the extra 8 inputs and mainly use the digital mixer convertors instead of the digi 002 convertors. So haow about you? does the adat work properly ?
Another problem : command 8 seems not to be supported either.
so before buying logic pro x , i need to know if it s gonna work normally and completly : spdif, adat and analog input, midi /i/o AND command 8 integration.
I m not sure it might work either on Avid software ( a shame !!)
I m ok to work again with logic after my 7 years using only protools IF i dont have to buy another audio interface and another midi controller...
here is the link for the last driver :
http://avid.force.com/pkb/articles/download/Digi-002-003-Drivers
here is a link for the command 8 drive rfor those who are lucky enough to have a protools 10
http://avid.force.com/pkb/articles/en_US/download/en379411
How is it possible that an "upgrade" finally results is a downgrade, as my new system cant match with the old one...
Unitor 8mk2 is perfectly working on 10.8.5 hop eit will work on 10.10 either...

Does Logic Pro 9 work with Yosemite?

Does Logic Pro 9 work with Yosemite? or do I need to upgrade?

Latest OS X & Logic Pro Compatibility Information

Is logic pro 9 compatible with os x lion

Is logic pro 9 compatible with mac os x lion

Hi,
See Here:
Logic for Lion
http://support.apple.com/kb/HT4807

LOGIC PRO WITH APOGEE ENSEMBLE + SYNTHS I/O

Im upgrading my studio and planning to buy an apogee ensemble for logic, an access virus, a moog lp and possibly a couple of outboard compressors. If anyone has a similar setup (i.e. ensemble with a few synths) could you give me a bit of info on the I/O setup?
The ensemble has 4 mic inputs, 4 1/4” jack inputs and 8 1/4” jack outputs. Firstly, are the mic and line inputs separate? (if I have a mic connected to mic input 1, can I connect the moog to line input 1 and record simultaneously?)
The virus has 6 outputs, I haven’t researched this much put I presume I could have, let’s say 2 or 3 different sequenced stereo parts at the same time? In this case, I was thinking the I/O setup would be like the following:
Access virus > ensemble Mic inputs 1-4 (2 stereo patches using balanced 1/4” jack to XLR cables)
Moog lp> ensemble Line input 1 (is this possible when Mic input 1 is used by the virus?)
Ensemble output 1-2 > Monitors
Ensemble output 3-4 > virus inputs 1-2
Ensemble output 5 > moog input
(possibly) Ensemble output 7-8 > outboard stereo compressor/processor of some sort! Returned on ensemble line inputs 7-8.
Does anyone have a similar setup to this? If this configuration works I’ll def go ahead with it, but my only concern is that there’s barely any room for more options! I could have 3 mono outboard processors to be used as inserts for I/O 6,7 and 8 but if I want to purchase another synth I’ll have to get another ensemble! Is there a better/more efficient way to run this setup or should I get something other than the ensemble?
All comments appreciated, thanks!

Ensemle have 18 inputs, just 8 of them are analog. If you need more, you must use additional convertors with Adat outputs.

Logic Pro dont work with ProTools HD3 with XD card and Apogee converter's

My Logic Pro dont want work with ProTools HD3....
I have G5 dual Core with 2 GO Ram, and ProTools HD3 and a Apogee converter's (with XD card extention).
I have in the same comuter Logic Pro 8, and i can't use the DSP of ProTools HD, and the Logic Pro plug-in and Protools HD plug-ins dont want work too.
I contacted Apogee, Digidesign and Apple for this problem, but anyone have the solution....

Hi DMS Debah
I got PT HD 2 and works great here !
TRY this : http://duc.digidesign.com/showthread.php?t=54888
Download this :http://www.digidesign.com/index.cfm?navid=54&itemid=25974
Read this : http://en.440forums.com/forums/lofiversion/index.php/t38958.html
try to change your Logic audio drivers ! you'll see there is(select it ) DAE
driver, TDM option and Core audio driver! You have to chose DAE driver then
reboot the logic Pro then it will work
Best,
u
PS : Si tu ne peux pas le faire on va réessayer
Message was edited by: jannhewi
Message was edited by: jannhewi

Logic Pro Environment Templates for Various Ensembles

I'm an old salt that started composing digitally only last year - always composed for live performance prior to this. Been tweaking VSL for eight months trying to find the right combination of Logic Pro plug-ins and settings on those plug-ins for a traditional romantic symphony ensemble (a typical Dvorak or Maller symphony instrumentation - not much different than a lot of modern movie instrumentations.) I've played in and been around highest level orchestras most of my life and am very frustrated trying to find the right combination of plug-ins to create realistic sound, not get clipped all the time when all instruments are playing forte passages, etc.
Are there any Environment templates anyone has produced with a set of plug-ins in place? Maybe this sounds sacreligious to some, but if I could get my hands on 10-15 templates of Environment setups people have used successfuly (romantic symphony, classical symphony, string quartet, chamber orchestra, woodwind quintet, movie scoring instrumentation, etc.), I feel like this would save me a few years of failing my way to success digitally.
Sure there are lots of variables that would require me to tweak things endlessaly, but at least I'd be doing it from a base template that has proven to work for at least one person with at least one set of variables with one specific ensemble, as opposed to the endless stream of things I've been trying with no base reference at all.
Help?

FYI - I'll even take just one template . Anything to give me reference point for doing my own thing. One way to do this would be to strip out all the track information itself and just email me the naked file with no music in it but the with environment still in place. I would be willing to pay if that's what it takes to get there.
FYI - I'm using Vienns Symphonic Library exclusively right now, but would still be glad to get my hands on some Environments set up for other libraries. Thanks.

Clicks and Pops with Apogee Ensemble/Duet since upgrade to OSX-ML

Problems with Clicks and Pops in Logic 9 (9.1.8 64 bit) since I upgraded to
Mountain-Lion (10.8.2) Does not really matter if I change the Buffer from 128
to 512! It is not very often but not acceptable. I made an additional
setup with external HD an installed SnowLeopard again. With this
OS-Version I can run without any problems with Buffer-Sices 128 or 64. Same
problem I had with my DUET as well. Would switch back to SL but some
of the programs I bought from Apple are not compatible with older OS
than Mountain-Lion. I also made a complete new ML installation from
scratch with only Logic Pro 9 and the needed USB-driver for my
Yamaha-CP1 but still the same thing. I do not see any
processor-Problems. I have an iMac (Mid 2010, 2,8Gh i5, 16 Gbyte Ram,
512 Gbyte Crucial SSD) Strange thing is that if I change the amount of threads used from
"Auto" to anything else it seems that the amount of Clicks will change for a
while. But it is not really reproducible and after a short time it reapears. Any idea what I can do to
fix this problem? Could it be that the driver is not that stable than
it was under SL?
Apogee Support told me after some correspondence more or less, that I am the only one with this issue... ?!?!?
I already changed cables, switched to USB-Keyboard instead of bluetooth, disabled WLan, installed a 2nd Harddisk and reinstalled the OSX and LOGIC a couple of times without any effect. The only way to get the Ensemble or the Duet working ist to switch back to SL which can't be the solution as it should be fully compatilbe with Mountain Lion. At least this can be read on the support pages fom Apogee!
Is there anyone with the same kind of problems?

Ok, folks...finally figured it out. Thank you so much for being willing to brainstorm with me on this. Here's the deal:
As I was searched online forums I found some discussions regarding different firewire chips they put into different models of the macbook pro's. Apparently you can have the TI (texas instruments) chip or the Lucent chip, you can discover which by holding down 'apple' and 'S' right after the welcome sound when you're booting up your MBP. As you search through the info it should say TI or Lucent by firewire.
Apparently, the Lucent chip is known for causing issues with different devices...this is the chip I have in my MBP. Someone on another forum said they bought an external firewire bus and just put it between the computer and interface and it solved the problem...so I thought 'what the heck.' I went and bought one and it worked perfect! Crazy.
So, now I need to talk to apple and i'm hoping they'll be willing to swap my chip for a TI one or at least cover the cost of the firewire bus.
Thanks again for helping me out. Hopefully this thread helps the next guy so he won't have to spend 3 months troubleshooting like I did.
God bless

How will Logic Pro X run with a 2006 iMac (Intel Core 2 Duo, 2.16 GHz, 4GB ram)?

I have a 2006 iMac 2.16 GHz, 4GB ram, Intel Core 2 Duo. I am not planning on using plug-ins, I am a beginning artist and Logic Pro seems to have more than what I need. Any help would be greatly appreciated.

Yes it will.. I would recommend you use the combination of Snow Leopard 10.6.8 and LPv9.1.5 (or 9.1.8 if you have to..) with that particular hardware to get the best performance out of it... I would not recommend running any OS X version higher than 10.6.8 as each new version of OS X from then onwards.. placed a bigger performance hit on the hardware... and frankly, less stability with LP9.
As to how well it will run on that hardware.. will more depend on the sort of loads you place on it.. depending on the type and content of the music you wish to compose... It will run and you should be able to create reasonable sized projects.. but again, it all depends on the plugins used.. the number of them... the number of tracks and so on... so to give a more precise answer is difficult.

Musical Logic Pro Task Bar with Apogee Ensemble

Similar Messages

Maybe you are looking for