Musket a3 USB 600 Scanner doesn't work with Yosemite

Hi there,
I have a Musket a3 USB 600 Scanner that doesn't work now that I have upgraded to Yosemite. Does anyone have a recommendation as to how I can use it? As Musktek aren't helpful and have told me they don't have a driver for yosemite... is there a way around this? Any help would be appreciated. 

I found this and testing now.
http://www.canon-europe.com/Support/Consumer_Products/products/scanners/Others/P -215.aspx?type=download&language=&os=OS%20X%20v10.10

Similar Messages

  • Sound Blaster omni 5.1 doesn't work with Yosemite 10.10.1

    Hi all! My SoundBlaster omni 5.1 doesn't work with Yosemite 10.10.1 (installed driver for Yosemite 10.10). Equipment in system is displayed properly, like "Sound Blaster Omni Surround 5.1". And SB is set as active. Volume controller is active (system shows volume adjustment). But there is no sound on output (either) and mic doesn't catch the signal.With MS Windows 8.1 it works good. Therefore I suppose problem not in hardwear, most likely in drivers.Does anybody have the same problem?

    Hi Andrew,
    The latest drivers release on 4 Nov, 2014 can be found here.
    Please download/install it and let me know if you still have the same problem.
    Cheers,
    Colin-CL

  • Microsoft word doesn't work with Yosemite. Please Help

    Microsoft word doesn't work with Yosemite. Please Help

    Office 2008 and 2011 work with Yosemite. If you had Office 2004 installed, then it will not work. If you had Office 2008 I would upgrade to Office 2011. In any event you should try completely uninstalling Office and then reinstalling it.

  • Lexmark scanner doesn't work with mac os x

    I have a problem with my scanner lexmark p4330. For two weeks now it doesn't work with my imac. I have the imac os x 10.7.5.
    When I try to scan, my printer displays "the all in one driver did not respond" and in Image Capture it displays "lexmark language error".
    I updated my softwares, there's one for lexmark but I can't install it and I don't know why!
    Can someone help me please?

    Mmm. Not sure what's going on. Has scanning ever worked with the OS you are currently running?
    A couple of suggestions (my last two I think as I'm running out of ideas ). I realise that your problems are only with scanning, but sometimes resetting the printing system resloves printing problems. I wonder whether it will help with the scanning issue given that Print & Scan are lumped together in System Preferences. To do it go to:
    System Preferences>Print & Scan, Control+Click or Right Click on the printer on the left and select 'reset printing system'. All printers will be deleted and need to be added again using the '+' button.
    If that doesn't help my last suggestion is to download the paid for app VueScan (which you can run in demo mode for free) to see whether it works or not. VueScan is very good and driving numerous types of scanners:
    http://www.hamrick.com

  • MSI K7N2-L usb 2.0 doesn't work with scanjet 4570c

    I have a MSI K7N2-L motherboard with WINXP and SP1 that doesn't work with Scanjet 4570C if I set USB in BIOS to 1.1+2.2.  Sometimes it locked up the PC or it showed streaks on the image.  It worked just fine if I set to USB 1.1.  Does anyone knows this is the problem with the MSI motherboard?  I'm sure it was not the Scanjet since it is USB 2.0 supported, and I'd tried another Scanjet and the problem was still the same.

    Quote from: Wonkanoby on 21-March-05, 21:14:07
    If you are having problems with USB ports, read this topic.
    besure you have only 8 wires connected no usboc
    Nice topic! 
    But usb 2.0 DOES work with 1.3, 1.4 and 1.52 BIOSes. Only after updating to 1.5 official one of the front panel ports (not all 2) start works as 1.1   

  • ZTE MF667 usb modem doesn't work with yosemite

    I have lost my internetten connection after having upgraded to yosemite. my usb modem (zte mf667) worked smoothly with mavericks. but it stopped to work when i upgraded to yosemite. i can not find a compatible driver either. now my machine is just a harddisk. what would a pc without internet look like?

    I have the same problem with modem Prolink PHS101 not working with yosemite, was oke with maverick, apple please help

  • Any product like the CanonScan LiDe 600F scanner (doesn't work with Windows8)

    I had a CanonScan LiDE 600F that allowed me to enter text right on the scanned picture.  Allowed me to crop, correct red eye, etc.  As I am copying lots of older pictures to do a slide show I would like to continue to show names on the picture so grand children and great grand children will know whom they are looking at.  I can't seem to find a Canon scanner that allows this. 
    Any help would be appreciated - if no Canon's does anyone know of any others?  I no longer have the 600F as I could not get any drivers or whateve I needed to work with Windows 8 (which I hate).  Doesn't seem to be a scanner forum?

    Is this not a W8 driver?
    http://www.usa.canon.com/cusa/support/consumer/scanners/canoscan_series/canoscan_lide_600f#DriversAn...
    John Hoffman
    Conway, NH
    1D Mark IV, Rebel T5i, Pixma PRO-100, MX472

  • HP scanner won't work with Yosemite

    I can't use my scanner (HP Deskjet F380 All-in-One) now that I have Yosemite.  I looked for the HP driver, but it doesn't exist for OS X 10.10.1  I need help, please.

    Have you tried using Image Capture that comes with Yosemite. I had a similar problem after the upgrade and my HP was no longer supported. I switched to Image Capture and it works fine, lacks some features that the HP software provided but overall it works for my needs.

  • Hp officejet pro 8600 doesn't work with yosemite

    Dear,
    I've installed yosemite on my mac and now scanning doesn't work, there isn't the scanning button in system/print and scan like before installing yosemite!
    I've tried to delete and reinstall driver (also update driver from appstore after installed the new driver) and I've tried to use the hp scan software but nothing the softaware report that there are no scanners!
    Printing works very well the problem is only on scanning and only on mac because other pc with windows works correctly!
    I've tried to follow this post   http://h30434.www3.hp.com/t5/Mac-Printing-and-Scanning/No-more-scanning-after-upgrading-to-MacOS-X-1...   but nothing the scan doesn't work also after done all the things in the post!!!!!
    I've also tried to speak with the phone assistance (in italy beacuse I'm writing from italy) but they have no advice for my problem!
    Please help me I need scanning with mac for work!!!!!
    Thanks
    marchinho

    Hello ,
    Thank you for contacting the HP Support Forum. I understand that you HP Officejet Pro 8600 is having issues scanning after your Yosemite update. After a little research, I found a document that might get us started in the right direction.
    Try these steps first, and then please let me know if they worked or not.
    Regards,
    wise_owl
    I work on behalf of HP.

  • Scanner doesn't work with wifi

    Hi, 
    I just install all the driver and soft for my HP photosmart B210 on my Mac running on the OS X 10.8. 
    The printer works fine with my wifi but not the Scanner on eather way from the printer or from the Mac using the same wifi.
    I found the same trouble with my laptop running on W7 but the HP scan doctor solved my prob on windows.
    is there is the Scan doctor equivalent for MAC? what can i do to make my scanner works?
    Regards

    I found my answer by myself ... 
    http://support.hp.com/us-en/document/c01664444
    According to HP :
    Print drivers for the following printer types are supported in Mountain Lion by the HP software available from Apple Software Update. These drivers provide print-only functionality.
    HP Inkjet single-function printers (Deskjet, Officejet, and Photosmart)
    HP LaserJet color single-function, All-in-One, and MFP printers
    HP LaserJet monochrome single-function, All-in-One, and MFP printers
    HP Designjet printer
    Voila !

  • HP 7310 scanner doesn't work with Mac Mountain Lion

    I just tried to scan a photo on my 7310 Officejet All-in-one.  It tells me I need to install software for this feature.  I know I scanned a photo with this same setup before.  However I upgraded to Mountain Lion and now it's not working.  I tried to find a download but the HP site tells me all my printer downloads are installed.  How do I get the scanner to work?  If this is a common problem for people using Mountain Lion why not just create a download for all of us to run?  Or a patch perhaps?  Thanks for your help.

    sc00ba,
    I am sorry you are having the issue with your software.
    1.) Did you uninstall the software before attempting to reinstall it?
    2.) Have you looked at this document to assist in the installation?
    http://h10025.www1.hp.com/ewfrf/wc/document?docname=c03378792&cc=us&dlc=en&lc=en&os=4142&product=391...
    ↙-----------How do I give Kudos?| How do I mark a post as Solved? ----------------↓

  • HP Photosmart Scanner Doesn't Work in Yosemite

    After upgrading to Yosemite my HP Photosmart 3200 printer scanner lost scanner. There are four ways to use scanner on Mac that I'm aware of  - from preview, from Image Capture, from system preferences, and from built-in printer/scanner web page.
    In the Preview the Import from scanner is greyed out,
    in the Image capture the scanner is not shown,
    in System Preferences pressing Scan does nothing,
    and in the built-in web page the preview sort of works (the image there is very small, so its difficult to assess the scan quality), but the scanning does not work.
    All methods worked just fine before upgrading to the Yosemite.
    I have all the updates installed, and re-installed the Yosemite a couple of times. HP driver version is 4.0.4
    MacBook Pro Retina, Mid 2012. Yosemite 10.10.1
    Any help would be greatly appreciated.

    I still can't use the native scanning took in OSx 10.10, but at least I can scan documents now.
    It should. This article says it is supported. OS X: Printer and scanner software available for download
    What happens when you open Image Capture?
    Do you see the scanner listed under devices?
    If so, what happens when you select Overview?
    If that works, how about Scan?

  • HP 3052 scanner doesn't work with Mountain Lion

    So I upgraded MacBook Air to Mountain Lion and everything seems fine except I can't use scanner function on my HP 3052 AiO. The printer still prints OK but I can't see scanner anymore.
    Can anybody help me?

    Hi,
    I affraid scanning is no longer supported for your product while using Mountain Lion, actually the same applies for any Mac OS X version starting from 10.6.
    You may find this information stated in here:
    http://h20000.www2.hp.com/bizsupport/TechSupport/Document.jsp?objectID=c03411613 #A2
    You may try using an earlier software version (The latest version intended for 10.5), however it is not assured to work and you may try it at your own risk.
    In order to install the previous software you may try following the workaround below:
    Enter System Preferences > Print & Scan, select the LaserJet 3052 printer and click the Minus sign to remove it.
    Download the Mac OS 10.5 software below by clicking the download button:
    http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en &cc=us&prodTypeId=18972&prodSeriesId=1140784&swItem=ma-58935-1&prodNameId=114077 9&swEnvOID=219&swLang=8&taskId=135&mode=4&idx=0
    Follow the installation by skipping the Setup Assistant till the installation will finish.
    Perform the following steps in order to provide the Setup Assistant the right permissions to complete on Mountain Lion:
    Open Terminal from the Utilities folder
    Type “sudo “ (with space) in the Terminal.
    Locate the HP Setup Assistant in folder Applications/HP LaserJet Software
    Right-click (or CTRL+Left click) the HP Setup Assistant and choose “Show Package Contents”.
    Open the “Contents” folder and then click “MacOS” folder. It should contain the Unix Executable File of HP Setup Assistant.
    Drag the HP Setup Assistant (Unix Executable File) into the Terminal and press enter.
    Terminal will ask for the password of the user.
    After writing the password press Enter Button.
    Now follow the Setup Assistant Steps to complete the installation.
    Good luck,
    Shlomi

  • Canon 5600f scanner doesn't work with Snow Leopard

    Please someone help - I made the mistake of upgrading to snow leopard. My new Canon 5600f scanner now does not work. Pop up says it has wrong driver. OK.. Downloaded EVERY Canon driver possible + the updated Navigator EX 2.0 software. Note I HAVE downloaded these files, specifically for this model of scanner, specifically for snow leopard: http://software.canon-europe.com/products/0010652.asp. I have rebooted the mac about 4 times. Please, what am i doing wrong?!

    Pahu,
    I too upgraded to Snow Leopard last night and have been having trouble with my 5600F all day. I'm glad I can still use the scanner in the Image Capture tool, but I would like to use the MP Navigator EX as well. I downloaded:
    Scanner Driver 14.8.2
    ICA Driver 1.1.1
    ver Solution Menu 1.4.0
    MP Navigator EX 2.0.4
    MP Navigator EX 2.0 Opener
    and On Screen Help 1.10
    The download area for the MP Navigator EX 2.0 Opener reads "In Mac OS X 10.6, you will need to set up MP Navigator EX 2.0 Opener with Image Capture before scanning using the Operation Panel or Scanner Buttons on the machine."
    I'm having trouble setting up the opener in Image Capture. The scanner still scans beautifully through Image Capture, I would just like full functionality back. Any suggestions? Thanks!
    Tangor

  • HP LaserJet M1522nf scanner doesn't work with Windows 10 scan feature

    I used the instructions from Honor Student to get my scanner going.  However, I did not see "Shell Hardware Detection" anywhere. Please advise!

    Hi @inetdude 
    Since there is no full feature software and driver for 8 or 8.1, I am not sure what else to suggest other than for you to reach out to Microsoft. The driver you are using is an in-OS driver, perhaps they can help you.
    Microsoft Community
    Please click the Thumbs up icon below to thank me for responding.
    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
    Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
    Sunshyn2005 - I work on behalf of HP

Maybe you are looking for

  • What are the mistake in this JSP program?

    Hi,all. I am a newcomer to learn JSP, and I sincerely hope somebody help me. the following is a JSP program, and I want it extract data from my database and show them on webpage as XML. But there always have some mistakes I cann't found it. Could som

  • Open InDesign 2.0 file in the CS5

    I have a InDesign 2.0 file. When I open with CS5 version, the application warning the following: "Cannot open 'File.indd'. Please upgrade your plug-ins to their latest version, or upgrade to the latest version of Adobe InDesign." Also the dialog box

  • 1.5.6 upgrade not seeing 1.5

    Have just upgraded os to leopard and now Aperture is missing its top menus and many features(i.e. on the HUD, many menus dont appear). Tried to to upgrade to 1.5.6 and even though its 1.5 installed, it claims not to see it and bombs the installation.

  • Anyone have a decent W540 IPS display profile?

    I just received a W540 with the hi-res IPS display.  I didn't order the X-Rite builtin calibator because  I have an xrite i1 pro calibrator and their software and I can calibrate it myself, and I hadn't heard very good things about the builtin's resu

  • Problem with a user-password request, urgent please!!

    Hi all!! I´m consuming a WS on XI with a Web Dynpro ABAP. When I execute the proccess I get an error, because is necessary to introduce an user and password in a popup to access XI. How can I avoid this request??