Must a QuickTime or Flash Movie act as a MIAW?

I'm hoping to import a quicktime or flash movie with an alpha channel, in hopes that the stage image will not be obscured. This is assuming that a movie can play in on the stage without being framed as a MIAW. Is this possible?
Thanks,
-david

You're not going to get an alpha channel in a QuickTime movie, and if you turn off DTS and try to apply an ink, you'll again be dissatisfied. I'm less sure about Flash movies, but suspect it will depend on how they're imported/played. You certainly have a better chance with Flash.
I am unsure where your MIAW reference has any relevance, but assuming this is what you're asking: yes - a video can play on the stage, it doesn't have to be played in a MIAW.

Similar Messages

Flash movie acts differently on different browsers

hi
i have created an online calendar, you can see it on
this
link
this application uses php as well which is called through the
actionscript
it works fine on firefox browsers, and some versions of IE,
the version i have is explorer 7 (which i really dont like), and it
doesnt work well at all. dont know if it works on safari or other
browsers, i havent checked it out yet
(the main problem is trying to write more than one message,
it isnt displayed on the messageboard on IE)
does anyone have an idea what the problem could be?
also if someone sees any problems on different browsers i
would like to know
thanks

"and it doesnt work well at all."
Is there sometime more specific to describe what is the
problem?

Obtaining the full file path specification from Flash Movie and QuickTime icons?

How do you obtain the full file path specification from Flash
Movie and QuickTime icons? I want the path and the file name that
is contained in these icons. I am using a "dive" to run through the
icons of a file, and when I come upon these two types of icons, I
want to obtain the above information that is contained in them. I
certainly can look in the property dialog box to get this info, but
there are many icons in these files, and I want to generate a list
of info based upon the various types of icons that I am processing.
Thanks

> How do you obtain the full file path specification from
Flash Movie and
> QuickTime icons? I want the path and the file name that
is contained in
> these
> icons. I am using a "dive" to run through the icons of a
file, and when I
> come
> upon these two types of icons, I want to obtain the
above information that
> is
> contained in them. I certainly can look in the property
dialog box to get
> this
> info, but there are many icons in these files, and I
want to generate a
> list of
> info based upon the various types of icons that I am
processing. Thanks
>
For Flash
Trace(GetIconProperty(iconID, #pathName))
for QuickTime
Trace(GetIconProperty(IconID, #filename))
For full scripting reference for each of these sprites, open
up the
Properties panel for each sprite and press the Help button
that appears on
the properties page ... or else navigate to these folders for
the Flash and
QT help
C:\Program Files\Macromedia\Authorware
7.0\xtras\FlashAsset\Help
C:\Program Files\Macromedia\Authorware
7.0\xtras\QuicktimeAsset\Help
You don't want to know how many times I asked Macromedia to
stop hiding that
Help!
Steve
http://twitter.com/Stevehoward999
Adobe Community Expert: eLearning, Mobile and Devices
European eLearning Summit - EeLS
Adobe-sponsored eLearning conference.
http://www.elearningsummit.eu

Exporting from flash movies without quicktime

I used to convert flash movies in dv (for further editing in imovie or Final cut express). With the latest QT update this is not possible anymore (and a lot of my projects are unreadable...). Anyone knows an (possibly inexpensive) way to convert a .swf file in dv or something else digestible from QT or visualhub? (visualhub relyes on QT support for converting flash movies, so this is not doable...)
Thanks in advance.

Buy a cheap external HD and install an older version of Tiger (and QuickTime) on it. Use http://perian.org and QuickTime Pro to make the conversion.
QuickTime 7.3.1 no longer supports Flash media formats.

Convert Quicktime (.mov) file to a Flash movie?

I have Flash CS3 that came with Adobe Creative Suite. I Never
used it but can it convert a Quicktime (.mov) file to a Flash movie
so I can play it on the web? If so where do I start? I also want
the viewer to be able to stop and start the Flash movie. I guess I
need a skin or something?
Also I'm confused about the difference between a FLV and SWF
file. Which one do I need for the web?
Thanks,

zcdz wrote:
> Is it possible to convert a quicktime movie .mov to a
swf file in Flash?
not really - you can export the MOV to an FLV and run that
through the flash player at runtime. You
can also import the MOV into flash doc. depends.
>
> Is it possible to import a .mov so that you see the
entire .mov- frame by
> frame and edit it in Flash?
Flash is not a video editor - i would get yourself quicktime
Pro ($30 US) and open your MOV and
export as an Image Sequence - then from flash import the
first image into it - flash will detect the
numerically named files and prompt you to import them all -
they will end up as individual images in
keyframes on the timeline.
But sounds to me like you are trying to use flash to edit
video - not recommended as flash was never
intended to be used this way.
>
> TIA
>
> Ziska
>
Chris Georgenes
Animator
http://www.mudbubble.com
http://www.keyframer.com
Adobe Community Expert
*\^^/*
(OO)
<---->

Quicktime Conversion doesn't but compressor doesvscrew my flash movies

I've been trying to explore the cause of a problem I am having using compressor 3.5 to export Flash Movies. Before the Snow Leopard upgrade I had no problems. But after the snow leopard upgrade when i export to .flv's using either my custom setting or the default high, med, low quality settings, the outputs have screen flickers the whole way thru unless the keyframe interval is set to 1.
However if I use export>quicktime conversion straight out of FCP the files are ok. Can any one divine the reason my compressor workflow is producing these corrupted .flv's, and do you have an idea on how I might fix it?
Obviously I have a slower workaround but my current tasks require the batch power of compressor.
Message was edited by: Steve Wolfram

I guess I'm alone on this??? Rather hard to believe.

Flash movies won't play in document or browser

Hi there,
I am having problems with putting flash movies onto my website. I know this is a common problem so apologies for any repetition.
I have trawled through a lot of forums trying to solve this issue and so far have not found a solution that works for me.
First of all I'm using dreamweaver v7, on a macbook OSX (intel)
On inserting flash movie, only the box with 'f' apears in the document, and in browser, nothing at all. It doesn't worry me so much that the movie doesn't appear in the doc, as with shockwave it's the same. However shockwaves play fine in browser.
I have tried the following so far:
- moved the movie .flv file to the same folder as the html document that it relates to
- made the file name really, really simple. 6 letters and no other characters.
- tested in alternative browsers
- tried inserting another flash object (flash button) to see whether the problem resides in inserting flash objects, or if the problem is with the movie file itself (the flash button worked, so I thought the movie file must be the problem) - so then ...
- I tried compressing the movie in a different programme - I tried sorenson squeeze - still nothing
- As inserting the movie as a quicktime works fine using 'insert shockwave', I even tried changing the file extension of the QT version from .mov to .swf as I read somewhere that it might work (!!!??) but it didn't though the movie still played without dreamweaver
So, I reach the conclusion that the movie is not after all the problem - but what is? since inserting other flash objects does work?
Very confused! Thank you for any help offered.... Laura

I am a bit confused though - is flash video not the same as flash movie?
No. Flash refers to its files as movie files. FLA (editable) and SWF (compressed for Web) are Flash movies - not to be confused with cinema. FLV files are Flash Video files.
Just to confuse matters some, just prior to the creation of the .flv format, it was not uncommon to import videos into Flash and save them as .swf movies (videos). But that was only good for very short, very small videos.
Additionally, since you brought it up, Shockwave files are also referred to as movies. But they are created by Director, not Flash. Director, like Flash, refers to its files as movie files. DIR is the editable file and DCR is the Shockwave-compressed file for the Web. The Shockwave plugin is not the same as the Shockwave Flash plugin. Shockwave Flash cannot play Shockwave movies, but Shockwave movies can play Flash .swf movies - neither of which are videos.
How's that for clear as mud?
Mark A. Boyd
Keep-On-Learnin' :-)
This message was processed and edited by Jive.
It shall not be considered an accurate representation of my words.
It might not even have been intended as a reply to your message.
Message was edited by: Mark A. Boyd

Flash movies in html

I am having difficulty impanting a flash movie into my
homepage. You can see my problems at the link below:
VIEW SITE HERE
problems:
1. The drop down menus from my navigation bar fall behind the
flash movie. I've tried working with layers, but I can't figure out
how to get the flash movie to fall behind.
2. The flash movie contains interactive content, but you have
to click once on the movie itself before you can scroll over and
see the interactive parts.
How can I fix these problems? Any help is much appreciated.

> 1. The drop down menus from my navigation bar fall
behind the flash
> movie.
> I've tried working with layers, but I can't figure out
how to get the
> flash
> movie to fall behind.
All Active content on a page will always rise to the top, so
to speak,
including Flash, certain form elements, Java applets, and
Active X controls.
This means that each of these will poke through layers. There
is not a good
cross-browser/platform reliable way to solve this issue, but
if you can be
confident in your visitors using IE 5+ or NN6+, then you can
use the Flash
wmode parameter (however, Safari does not support this
properly!).
Adobe articles:
http://www.adobe.com/cfusion/knowledgebase/index.cfm?id=tn_15523
http://www.adobe.com/cfusion/knowledgebase/index.cfm?id=tn_14201
> 2. The flash movie contains interactive content, but you
have to click
> once
> on the movie itself before you can scroll over and see
the interactive
> parts.
It's IE-only behaviour as a result of changes Microsoft made
several
years ago to their browser, regarding how Active Content
(Flash, Quicktime
etc)
is handled, after losing a high profile court case.
http://blog.deconcept.com/2005/12/15/internet-explorer-eolas-changes-and-the-flash-plugin/
Background:
http://en.wikipedia.org/wiki/Eolas
See also
http://www.adobe.com/devnet/activecontent/
If you're running Dreamweaver 8.0.2/CS3, the fix is already
built into DW's
interface.
If not, try
http://blog.deconcept.com/swfobject/
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
==================
"GUwebmast" <[email protected]> wrote in
message
news:[email protected]...
>I am having difficulty impanting a flash movie into my
homepage. You can
>see
> my problems at the link below:
>
>
http://barney.gonzaga.edu/~outdoors
>
> problems:
>
> 1. The drop down menus from my navigation bar fall
behind the flash
> movie.
> I've tried working with layers, but I can't figure out
how to get the
> flash
> movie to fall behind.
>
> 2. The flash movie contains interactive content, but you
have to click
> once
> on the movie itself before you can scroll over and see
the interactive
> parts.
>
> How can I fix these problems? Any help is much
appreciated.
>
>
>

Import Flash Movies

About 18 months ago I started webcasting on services like Ustream.tv. I recorded an online flash movie and downloaded them to edit.
in 2009 I did about 200 hours like that and never really learned a good way to get flash converted to go into FCP. Best was Quicktime 7 with Perian, to H264. Each was a struggle and would have mild to severe audio sync problems, even working in 15 fps, which was the flash movie frame rate.
Then I got the 8 core machine and had enough processor to make a desktop Quicktime 7 recording, which still wasn't all that compatible with FCP. Then I would use the on-line flash movie only as a failsafe backup.
This morning (a really good session) and my Quicktime7 failed. I am back in the flash movie soup.
Can anyone give some guidance on compressing an flv for FCP?
Wow, would this be great to solve. Someone in this world must edit flash movies?
Thanks
Richard Miller

I have also taken Youtubes (downloaded with ImToo) and I have used Quicktime-7 with Perian to convert them.
Can it be that flash files can have different parameters, that aren't always friendly to conversion. The .flv that I point to above Plays well (in sync) on Blip.tv, but when downloaded both QT-7 and Mpeg=Streamclip make a hash out of it. I uploaded it also on my website, if anyone has some time to help me figure this one out.
http://nevernothere.com/images/Unmani.flv
This should download easily and fast.
It is 14.93 frames per second.
And thanks
Richard Miller

How can HTML call a Flash movie?

Greetings Everyone!
I'm sincerely hoping that someone has the answer for me. I'm
a newbie, but trying so very hard to understand... :) I've read
books, pages & pages of this forum, 'net searches - I haven't
found a complete answer to my challenge so far - thanks in advance
for any help you can give...
Here's where things are:
1) I've created a series of swf Flash movies that loop (at a
particular size so they can play inside of an html table cell)
2) I've created html buttons in another cell
What I'm trying to do:
1) Like a swap file in HTML (where you click a button and an
image changes elsewhere on the page, click another button, and that
image swaps to a different image file)
I want to have a flash movie play on a click of a button, click
another button, and a different flash movie plays in the same
spot.
The challenge is the interaction between Dreamweaver and
Flash and getting HTML to talk to Flash.
Here's the code direction I've been heading ...
...IN MY HTML code...
I have a onMouseClick event for each button link. In this
code I set some variable names inside it.
onMouseClick="setFlashVariables('sendmovie','myMovie=activeMovie1')"
---- this would be for button 1.
onMouseClick=
"setFlashVariables('sendmovie','myMovie=activeMovie2')" ---- this
would be for button 2
onMouseClick
="setFlashVariables('sendmovie','myMovie=activeMovie3')" ---- this
would be for button 3
Basically, I'm setting a 'myMovie' variable to 'activeMovie1'
or 'activeMovie2' or 'activeMovie3' when one of the buttons is
clicked.
If 'myMovie' variable is equal to 'activeMovie1' by clicking
a link, this will tell a flash movie: (" Hey flash! Variable
'myMovie' is equal to 'activeMovie1'. Act accordingly."). When the
2nd button is clicked, 'myMovie' will be equal to 'activeMovie2'
and so on.
I need to declare the 'myMovie' variable in my flash movie -
how do I do that?
...IN FLASH...
1. I need to create one variable which will act as a variable
receiver from HTML. (What I called "myMovie")
2. I gather I need to create an IF statement so that
"myMovie" is set to which "activeMovie" ( it could be
activeMovie1/activeMovie2/activeMovie3 etc ) ,
----->Question:
Where should the IF statement be and
How should it be written?
Admittedly I don't know Action Script 3 very well.
if myMovie is equal to "activeMovie1"
then load a movie. (This movie will be a movie related to my
1 Button.)
else if myMovie is equal to "activeMovie2"
then load a movie. ((This movie will be a movie related to
your 2 Button.)
else if myMovie is equal to "activeMovie3"
then load a movie. ((This movie will be a movie related to
your 3 Button.)
Here's where I'm stuck....
1) If I've already made my movies into swf files where does
an IF statement go?
2) I'm missing the mechanics of how to connect the dots here
- how do I get button 1 to load movie 1 and start playing
automatically? When I click button 2, movie 1 is replaced by movie
2 and starts playing automatically.
It's a detailed explanation (I know) - I'm hoping someone has
an answer for me that's equally explicit. Thanks so much much for
taking the time to read it!!

Anybody?

How Can I Get A Flash Movie to Access Local Files

I have a customer that has created a Flash movie to run off a CD. The movie is basically a set of menus with links to access local files in the same directory as the movie. i.e. Main folder (to be root of CD) has the movie, a Documents folder with PDFs, a Movie folder with wmv and mov files, etc.
The problem arrises when you click on a link to a file, a web browser is launched, and the browser tries to display the target file. The movie was designed on a Windows system, and, mostly it works in a Windows environment, however, the links totally crap out on a Mac because the URLs are pc centric.
He is a rookie flash programmer so I am trying to help him set up proper links to the files, so that the files will (hopefully) launch the proper local app and not a web browers. i.e. if the link points to a PDF, the Adobe Reader is launched; if the link is to a mov file, then QuickTime is launched....
Is there a way to do this? All the tutorials I have found all seem to expect the flash movie to be running on a web server, and as such do not work when running the movie off a CD.
Any help or suggestions would be grealy appreciated.
A response ASAP would also be greatly appreciated as the customer needs to deliver 200 CDs of the project for a presentation tomorrow morning - I have to create the CDs...
TIA

Hi there,
Maybe you would want to use swfObject, i've been using it for
a long time now.
http://blog.deconcept.com/swfobject/
cheers

How Do I Execute An exe or an msi Install file From a Button in Flash Movie

Issue:
I have a flash movie that runs as a standalone player on a
Demo CD... I also have an install msi file(same as an exe) that
when the user is done viewing the flash movie they can click on a
menu button in the flash movie that executes the msi or exe located
on the root of the CD which starts the install process.
Question: What is the action script (FOR FLASH 8) that i
apply to the button that will initiate or call the MSI or exe
install file.
Anyhelp would be great... even a link to an example... or
anything... thanks
Thanks in advance...

fscommand("exec","myexe.exe");
Should run the program myexe.exe inside a directory called
fscommand
which must be a subdirectory of whereever your projector is
located.
In windows:I know you can run .bat files with fscommand. But
I'm not sure about msi files.
You can often get around the limitations by having a .bat
file that will a) show a cmd window briefly and b) do the thing
that you couldn't do from flash.
If running the msi doesn't work from flash directly you may
want to try using a bat file...
There's some information here.
http://livedocs.adobe.com/flash/9.0/main/00001177.html#wp143348

Itunes 8 not working, Quicktime error, Flash 8 not working

Ever since i did the upgrade to iTunes 8 on my windows vista machine, I can't get into itunes, quicktime or flash 8. This is really really frustrating seeing as i just bought a new iphone and i cant even get into itunes to sync it. Luckily I have a second computer i could use to unbrick it.
The error I'm getting when I try to open itunes,
well after i installed itunes 8 i clicked on the start menu shortcut it said please wait while windows configures itunes and then at the end it says you must restart your system for the configuration changed to itunes to take effect. so i restart my computer.. then click on the short cut again.. and it gives me the same message.. over and over!
so i tried opening an mp3 file in itunes and it throws this error..
Problem signature:
Problem Event Name: APPCRASH
Application Name: iTunes.exe
Application Version: 8.0.1.11
Application Timestamp: 48e41bb0
Fault Module Name: QuickTime.qts
Fault Module Version: 7.55.90.70
Fault Module Timestamp: 48ba2f81
Exception Code: c0000005
Exception Offset: 0008e434
OS Version: 6.0.6001.2.1.0.256.6
Locale ID: 3081
Additional Information 1: fd00
Additional Information 2: ea6f5fe8924aaa756324d57f87834160
Additional Information 3: fd00
Additional Information 4: ea6f5fe8924aaa756324d57f87834160
Ive uninstalled it, reinstalled it, like 4 times.. and cleaning the registry and everything between each install.
when i open quicktime i get this error:
Problem signature:
Problem Event Name: BEX
Application Name: QuickTimePlayer.exe
Application Version: 7.55.90.70
Application Timestamp: 48ba1f5c
Fault Module Name: QuickTimePlayer.exe
Fault Module Version: 7.55.90.70
Fault Module Timestamp: 48ba1f5c
Exception Offset: 0000130d
Exception Code: c0000409
Exception Data: 00000000
OS Version: 6.0.6001.2.1.0.256.6
Locale ID: 3081
Additional Information 1: 4419
Additional Information 2: ebf79ba0046ae6662468948de5348393
Additional Information 3: 6956
Additional Information 4: 7abd868591af5ec835ec4f6b692849a6
I can live without itunes and quicktime, if i have to.. but i cant live without flash.. I paid like $700 for this software, and thanks to an itunes update... i can't even use it. Flash throws the error:
Problem signature:
Problem Event Name: APPCRASH
Application Name: Flash.exe
Application Version: 8.0.0.478
Application Timestamp: 4315901b
Fault Module Name: QuickTime.qts
Fault Module Version: 7.55.90.70
Fault Module Timestamp: 48ba2f81
Exception Code: c0000005
Exception Offset: 0008e434
OS Version: 6.0.6001.2.1.0.256.6
Locale ID: 3081
Additional Information 1: 810c
Additional Information 2: e58675b4f28fe85ffd27d4c54797659b
Additional Information 3: 1b44
Additional Information 4: abbafcc132a6306dfccb652a44439356
Anyways could some quicktime/itunes genius please help me! I'm really out of ideas and i have heaps of urgent flash work to do!
Thanks so much

I had the same thing happen to me. I am basically concerned with my itunes..

Flash movie not displayed correctly in IE 8 on some Windows OS

Has anyone seen this problem?
I'm using CS4 to export a basic flash movie with embed tags pre scripted...
And the issue is that on some OS systems using Vista or Windows 7 and IE 8 as a primary browser, it appears that IE 8 is not displaying the flash banner completely.... its CROPPING it off... This is very strange because the banner works fine in FireFox, IE7,Opera,Chrome but not I.E.8 on some OS systems...
If you google "Flash not displaying correctly in IE 8" you'll get alot of people with the same issues but no real definate fix...
Are there any suggestions as to what i could try?
Do i need different flash embed tags? Or is this a user issue?
Please Advise as soon as possible...
Thanks

I'm sorry, i forgot to explain that I didn't upload the flash published html because it did and produced the exact same results.
The flash published still got cropped off on 1 vista os(I.E 8) running from a laptop and 1 windows 7(I.E. 8) latop os...
Its good to hear that you're able to see it clearly... however in my QA efforts, i've been asked to fix the issue or drop the flash banner all together.
I've tried every which way, i've even converted the embed tags (not uploaded by the way) to a js script and it STILL gets cropped of on 2 ie8 run OS systems...
And now i'm not sure what else to try on my end.
I'm currious if because this is an XML driven flash banner, this may be an issue? But it still doesn't explain why some people can see this in IE 8 as you can and others get a cropped banner like in my screen shot sample.
Again i invite everyone in the forum to take a look at the sample links, as i'd be curious to see who else is seeing this.
By the way "kglad" Thank you so much... please keep the suggestions coming... but everything you've suggested, i've tried.
This is very perplexing. Is this a setting issue? or is there some setting on the user side i'm not aware of? Either way, as usual... the flash developer is blamed so i must find a solution.
Link to flash sample
http://www.extremefx.net/flashie8issue/flashtest.html
Link to screen shot sample on a Vista and Windows 7 running IE 8 browser
http://www.extremefx.net/flashie8issue/ie8issue.jpg
Again... eagerly await feed back from you and the rest of the forum.
Message was edited by: RegGFX

Page won't display flash movie

Hi I just posted my website and I have a flash movie on the
page and when I render it in firefox from dreamweaver it shows up
fine but on the server it is blank.
The website is
www.silvereaglemarketing.com
here's the code
<script type="text/javascript">
AC_FL_RunContent( 'codebase','
http://download.macromedia.com/pub/shockwave/cabs/flash/swflash.cab#version=9,0,28,0','wid th','800','height','120','title','machines_movie','src','Flash/machines1','quality','high' ,'pluginspage','http://www.adobe.com/shockwave/download/download.cgi?P1_Prod_Version=Shock waveFlash','movie','Flash/machines1'
); //end AC code
</script><noscript><object
classid="clsid:D27CDB6E-AE6D-11cf-96B8-444553540000" codebase="
http://download.macromedia.com/pub/shockwave/cabs/flash/swflash.cab#version=9,0,28,0"
width="800" height="120" title="machines_movie">
<param name="movie" value="Flash/machines1.swf" />
<param name="quality" value="high" />
<embed src="Flash/machines1.swf" quality="high"
pluginspage="
http://www.adobe.com/shockwave/download/download.cgi?P1_Prod_Version=ShockwaveFlash"
type="application/x-shockwave-flash" width="800"
height="120"></embed>
</object></noscript>

Did you upload the Scripts folder that DW places in your
local site when you
insert Flash?
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
==================
"desypher" <[email protected]> wrote in
message
news:fvmvdi$cqu$[email protected]..
> Hi I just posted my website and I have a flash movie on
the page and when
> I
> render it in firefox from dreamweaver it shows up fine
but on the server
> it is
> blank.
>
> The website is
>
> www.silvereaglemarketing.com
>
> here's the code
>
> <script type="text/javascript">
> AC_FL_RunContent(
> 'codebase','
http://download.macromedia.com/pub/shockwave/cabs/flash/swflash.cab#
>
version=9,0,28,0','width','800','height','120','title','machines_movie','src','F
> lash/machines1','quality','high','pluginspage','
http://www.adobe.com/shockwave/d
>
ownload/download.cgi?P1_Prod_Version=ShockwaveFlash','movie','Flash/machines1'
> ); //end AC code
> </script><noscript><object
> classid="clsid:D27CDB6E-AE6D-11cf-96B8-444553540000"
> codebase="
http://download.macromedia.com/pub/shockwave/cabs/flash/swflash.cab#ve
> rsion=9,0,28,0" width="800" height="120"
title="machines_movie">
> <param name="movie" value="Flash/machines1.swf" />
> <param name="quality" value="high" />
> <embed src="Flash/machines1.swf" quality="high"
> pluginspage="
http://www.adobe.com/shockwave/download/download.cgi?P1_Prod_Versio
> n=ShockwaveFlash" type="application/x-shockwave-flash"
width="800"
> height="120"></embed>
> </object></noscript>
>

Must a QuickTime or Flash Movie act as a MIAW?

Similar Messages

Maybe you are looking for