Must I change router's ip if I use vpn---RV110W

Hi there:
The ip of my RV110W is 192.168.1.2. Now I'm adding a row in vpn clinet setting table.When I put the save button the page shows"in order to ensure proper functionality.the router need to change its ip address to 10.x.x.1". So. I need to konw Must I change router's ip to 10.x.x.1 in order to use VPN? it's very Inconvenient cuz my devices are all set to 192.168.1.x range.

Hello,
Im sorry you are having issues with your device.
You are right, the router will force you to change the IP address when you try to date a new VPN user, if it is still using the 192.168.1.X IP address, this is to prevent issues when people is connecting remotely as that subnet is the most used one and if somebody tries to connect remotely while using the subnet 192.168.1.X then the connection will be rejected.
Now, you don't really have to change it if you don't want to (I wouldn't advice it as the feature is there for a reason and most likely you will have issues with users connection from the same subnet).
What you can do is to change the IP address to whatever you like, create all the VPN users and then change the IP address back to what you want to, this way you fool the router and you can keep your current IP address (again, this is not recommended)
I hope this was help helpful, please let us know.

Similar Messages

Airport Extreme Route - Logging into remote computer using VPN

is there anything i need to change on my airport extreme router. I used to be able to access remote computer via vpn and now I cant ever since i started using the airport extreme. Im trying to access remote computer using windows xp home.

bkohlmeier wrote:
On one of the 2wire config screens last night, it showed my various devices and next to each one said "IP" of 108.54.... so it was showing the public IP of each one, versus say "192.168.1.160".
Ok, that is weird. Is each IP different and how many devices do you have getting public IP's.. there should only be one available and the only device getting it should be the extreme.
If you only need a bridged modem. go out and buy a cheap single port modem. (I presume this is DSL service. Sorry I am not in US, so what is obvious to you may need spelling out).
We often use the cheapest TP-Link modem here.. TD-8817 which are like $25 for bridged modem.. works really well.
I think also you will find as far as pc is concerned the 2wire is actually the better router. Apple decided to use NAT-PMP on their routers instead of near universal upnp used by all windows networking and just about everything else. That makes opening ports that much harder on the Extreme for games etc.
With the new version utility you can turn on guest network even with the Extreme in bridge.. and what you miss in terms of dhcp is not that great.
If you want to get it working, let me suggest bridging the extreme for the moment. I am sure you will find no issues with Remote Desktop direct through the 2wire, as you probably used it in the past that way.

How to change routing in customisaiton file?

Hi All,
I have single configuration project with number of proxy, biz, local and ftp services. I am using ANT and WLST scripts to export and import this project into different environments.
The import customisation file has number of tokens for endpoint URI which are replaced during import process for target environment - reads properties file for endpoint uri values. Yes, the customisation file is huge and difficult to maintain should someone adds new services. But this process is working for us though.
Now the problem is i have been asked that service routing information during import process should also be tokenised etc i.e. we could change routing to a local service instead or jms or vice versa etc, instead of using dynamic routing in the flow.
I am not sure if its sensible enough to handle this in the customisation file instead of using dynamic routing which is available in the flow which can handle it better???
What approach should be followed between dynamic routing or customisation file or both?
can we use customisation file handle this at all? is yes, any information or example would be very helpful!
many thanks in advance!
sal
Edited by: sallo on 11-Jan-2010 03:27

Hi Salo,
Please refer -
Auto deploy of ALSB/OSB artifacts - Proxy, WSDL and webservices...
need wlst code to autodeploy alsb project
Can we use WLST to deploy the alsb project without the manual import proces
Play with WLST and find solution of your problem.
All the best!!
- Anuj

Some of my contacts are not displayed in my contact list, but I know they're in memory because when one of them calls me my phone recognizes the caller. This happened a few days ago, so i must have changed some setting,but I have no idea which one. Help?

Recently some of my contacts are no longer displaying in my contact list, but I know they're in memory because when one of them calls me my phone recognizes the caller. This happened a few days ago, so i must have changed some setting,but I have no idea which one. Can anyone help?

Why start a new and very similar thread to your other one which you have not responded to (have you read the replies?)
I suggest that no response is made to this duplicate thread.

HT4910 documents edited on iphone, ipad, & mac what is the order of creation and editing and must each change be manually initiated to update the icloud

documents edited on iphone, ipad, & mac what is the order of creation and editing and must each change be manually initiated to update the icloud?

No idea what you mean by the firsy part of your question.
Documents edited on the Mac need manually uloading to iCloud at iCloud.com,documents edited on the mobile devices are updated automatically.

Connection fails after changing router to wpa

hi there i got a wireless-b BEFW11S4 router and my pc is using a wireless-g adaptor. my internet is supplied by a company who reguired us to change to wpa and after that my pc could't connect to the internet. my laptop is still able to connect so im wondering what is wrong

im not sure but that shouldn't be the case. my adaptor can connect fine when i disable the wireless security(wpa pre-shared key)in the router wireless settings. unless ofcuase that a b router cant accept a g adadpotr when running wpa

My Sony Cybershot has always connected directly to iPhoto, but I must have changed a setting somewhere, and now it opens in Finder. Very frustrating to have to locate and then drag pics to iPhoto. Would I reset in the camera menu or in System Preferences?

My Sony Cybershot has always connected directly to iPhoto, but I must have changed a setting somewhere and now it opens in Finder. Very frustrating and I can't find where to change the settings - camera menu or Mac Preferences. Any advice?? Thanks

No, not in iPhoto, but instead in Finder (only). I've tried going into the camera menu and making sure it's set on Mass Storage, but no difference. Then I tried Auto - but also no difference.

I'm trying to order album and I'm getting this message:Your book seems to have frames on one or more pages that do not contain photos. You must either change the layout of those pages or place photos in those frames before you can proceed with this book.

I'm trying to order an album and I'm getting this message:
Your book seems to have frames on one or more pages that do not contain photos. You must either change the layout of those pages or place photos in those frames before you can proceed with this book.
As far as I can see I have placed pictures on all the pages. I admit that on some pages I could have placed 3 or 4 pictures but I chose to use ony one or two. Could that be the problem?

Yes -
Your book seems to have frames on one or more pages that do not contain photos. You must either change the layout of those pages or place photos in those frames before you can proceed with this book.
The error seems pretty clear - you must have a photo in evey photo frame in order to place your order - so you must either change the layout (if you only want one photo on a page then use a layout with one photo) or put photos in the spots you have not filled
LN

On my Mac desktop I must have changed a setting so that now when I move the mouse the open windows fly off to the sides and I can't see them. They come back when I move the mouse, but it is so annoying. How can I make the windows not disappear like that?

On my Mac desktop I must have changed a setting so that now when I move the mouse the open windows fly off to the sides and I can't see them. They come back when I move the mouse, but it is so annoying. How can I make the windows not disappear like that?

Click on the Hot Corners.. button and look at the four definitions. In the picture below, if you moved the cursor to the right top of the screen, it would slide all the applications off the screen as you describe and show the desktop. Set it to "-" to deactivate.

BAPI to change routing CA02

Hi,
I've been going through the forums and I still cannot find a bapi to change routing (CA02). Do you know any bapi or function module that i can use to change routing. Please help.
Regards,
April

Hi,
there is no bapi for changing Routing, instead use
BAPI_ROUTING_CREATE Creation of a routing
BAPI_ROUTING_EXISTENCE_CHECK Check whether routing exists
Regards

Downloaded trial photoshop elements 12. Can't access it or upload a photo I must fix/change background on

Downloaded trial Photoshop Elements 12. Can't access/open it or upload a photo I must fix/change background on...

Hi literarykid,
Please let me know what error you get when you try to open PSE12 and which OS you are using.
Regards,
Rave

B210a will not print after changing router\modem

b210a will not print after changing router\modem. Says it is connected to network, but will not print and says unavailable

Good morning,
Please use the second section of the following article to fix:
http://www8.hp.com/au/en/campaigns/wireless-printing-center/reconfiguring-system-help3.html?jumpid=r...
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

After changing router cannot printer to wireless system

Just changed router and found the printer was no longer visible so stated a complete reinstall,got a page that requested I connected a USB cable printer/computer to continue. I do not have a long enough lead and did not need one the first time I installed the printer so what is going wrong> I have 64 bit Windows 7 thought I may need a different driver but nothing works because I cannot complete installion
This question was solved.
View Solution.

I suspect it is your router causing problems. First, restart the router by pulling its power plug momentarily.
Next, on the printer go to the wireless menu and choose "Restore Defaults".
Finally, reconnect the printer to the router as you would normally.
After all this you will likely have to delete and re-add the printer on your computer.
Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
I am employed by HP

The user's password must be changed before signing in

I have set up a new laptop with a new of users.
One of these attempted to access their account, and was asked to reset their password however this screen has got stuck. The password they enter is correct (we have tried it on a different machine) but we just get the screen 'The users password must be changed
before signing in'
Can't get back to the start screen, can't try and login as a different user, and when I force a restart then the screen just comes back, and when I've left the battery to run down also the same screen comes back.
When I can sometimes get the screen to go away then the screen is just blue (no markings of any kind, plain blue), and if I click or move mouse the login screen comes back.
Any advice gratefully received

Hi,
Regarding current situation, let’s try following steps to check the issue:
Step 1: Power the system off, remove the USB plugs for both the mouse and keyboard and move them to different USB ports. Power the machine back on and wait 2-3 minutes to make sure Windows has detected and set up the devices again.
If step 1 doesn’t work, please try step 2:
Step 2: Basically windows 8.1 stopped all the USB ports from working. Go into BIOS, for USB configuration:
Changed it to Intel XHCI mode: Disabled
Legacy USB Support : Enabled.
Hope these could be helpful.
Kate Li
TechNet Community Support

Must I change my entire computer to Spanish to write Spanish documents in pages for OSX-Lion?

Must I change my entire computer to Spanish to write Spanish documents in pages for OSX-Lion?

If part of your issue has to do with Spanish-language accents, here's a guide (works everywhere in the Mac OS, not just within iWork):
OPTION-e and tap a vowel gives you the acute accents á é í ó ú
OPTION-n and tap n gives you the ñ
OPTION-1 gives you the inverted exclamation mark ¡
OPTION-SHIFT- / gives you the inverted question mark ¿

Must I change router's ip if I use vpn---RV110W

Similar Messages

Maybe you are looking for