Must I "Log and Transfer" from Canon HG 10?

I have a Canon HG 10 (which is an HDD camcorder) and I'm using a 2.2 ghz macbook pro with OS 10.5.6. I can open the camera's disk image on my desktop and copy the "AVCHD" folder to my hard disk, and everything seems to be there. Question: can I simply navigate to the video clip folder and import the clips into FCE, or would it be more complicated?
In the past, if I copy the "AVCHD" folder to my hard disk, and then make a disk image out of it, imovie has treated the disk image like a camcorder (I haven't tried this yet with FCE), but I'd rather not have to make the AVCHD folder into a disk image-- doesn't seem like this should be necessary. Thanks

I want to keep a duplicate of the camera's information, before it is imported into FCE. I can log and transfer from the camera, but I'd like to keep an exact duplicate of the video camera's disk information on another hard disk even after it has been deleted from the camera. Also, it seems to not take nearly as long to open the camera's disk image and copy the files than it takes to log and transfer into FCE, from the camera, so apparently I don't have to keep the camera connected to the computer as long as long as I can retrieve the files from the copy later.

Similar Messages

Log and Transfer from Canon Legria HF M36

Hello everyone,
I write from Italy.
I have a big problem. I can not successfully import video clips from my camcorder Canon Legria HF M36 into Final Cut Pro using Log and Transfer with any setting. If I get same clips in iMovie 09 I get clips into Apple Intermediate code, good. If I use the same clips in Final Cut Pro 7.0 video looks rough. I do not know what to do. Who can help me?
Thank you very much
Giovanni Losacco

That camera is confusing me when I look it up on BandH. Is it HD or SD?
It sends to SD card, yes? What format are you bringing it in as? I'd try Apple ProRes LT to start. See if that works.
CaptM

Log and Transfer from Canon HFs100

I have connected my Canon HFS100 via usb cable to my mac and am able to use log and transfer to import/convert most of the clips. The problem I have is that it will not convert about 10% of the clips for some reason.
I am able to view and play the clips that are not able to be converted in the player in the log and transfer window, but when I add them to the queued section to convert them it tries to convert them and then fails. I get the Red Stop sign with exclamation point.
All video was shot one after another and nothing different was done.

Deleting FCP Preferences:
Open a Finder window. Set the view mode to columns:
Click the house icon that has your name next to it.
Click the folder "Library" in the next column.
Find and click the folder "Preferences" in the next column.
Find and click the folder "Final Cut Pro User Data" in the next column.
Move the files "Final Cut Pro 6.0 Prefs", "Final Cut Pro Obj Cache" and "Final Cut Pro Prof Cache" to the Trash and empty it.
Note: For FCP 7 the file will be called "Final Cut Pro 7.0 Prefs", obviously.
When you have a stable set of preference files, download [Preference Manager|http://www.digitalrebellion.com/pref_man.htm] to back them up. I

Log and transfer from canon xf100 footage - only 2/3rds transferring

Hi
Have looked at all the discussions around log and transfer, but am confused as to why many go through brilliantly, but about a third have an 'error unkown!' sign. Why sould some go through and others not? What can I do about this?
Any suggestion welcome
Chloe

chloeUK wrote:
many go through brilliantly, but about a third have an 'error unkown!' sign.
I haven't run into this problem with this format. Do you mean that typically a third of tthe Log &Transfers fail or that a third of the clips in an L&T typically fail to import?
Russ

Log and transfer from MRC1?

Trying to log and transfer from my MRC1. Ive downloaded the plug in. When I pull up log and transfer and try to " add custom path " Im selecting sony plug in device, I assume this is correct. Sony plug in device then appears in top line of new window but under that the video info is not highlighted it is dimmed out, like it is not available to select. Any help would be appreciated.

Try using MPEG STREAMCLIP
Transfer your files on your desktop and convert them.
This I what I do with those type of cam

Log and Transfer with Canon XF300's after 1.0.2 Firmware upgrade

Is anyone having issues with Log and Transfer with Canon XF300's after 1.0.2 Firmware upgrade?

Yes, just experienced it yesterday at a shoot after upgrading to 1.0.2 two days ago. Have you found a solutions yet?

Log and Transfer with Canon 5d mark iii footage on OS 10.5

FCP is not recognizing my SCDH card in the Log and Transfer window
and I'm wondering why this is.
I am running OS 10.5 - and there were no additional EOS drivers available
on Canon's website for my OS.
I am shooting with the new 5D mark iii. When I first got the Rebel T2i a few years
back, I had the same problem and installing the Canon driver worked to
get the card to show up in the Log and Transfer window.
Does anyone have tips for how to get my Log and Transfer window to recognize
a card from the 5D mark iii?
Thanks.

Hi, guys.
In my experience, the best native format is ProRes MOV while the 5D Mark III recorded file is H.264 MOV. So I have been using a H.264 to ProRes MOV Converter to help me change the 5D Mark III H.264 MOV files before importing to FCP on my iMac. I found the way from Google. The below is the link.
http://www.editavchdmac.com/convert-5d-mark-iii-mov-footages-to-prores-for-editi ng-in-fcp-x/
Thanks

Log and Transfer from network volume causes FCE to crash

I have copied the contents of an SD taken from a Canon HF100 to a volume mounted on my network. Originally, this was only intended as a means of back-up but I found I needed to capture additional footage so I navigated to the volume in the Log and Transfer window and began ingesting clips. The first clip worked just fine but the Log and Transfer window hung about 1/3 of the way into the second. I can preview all the clips in the L&T window but the program crashes when I ingest. The clips vary in length but that does not seem to be a factor in the problem. I tried this on both a Tiger machine and a Snow Leopard machine with the same results. iMovie was able to ingest the footage over the network without the same problem. Ultimately I moved the footage back to a local drive and transferred from there without any issues at all. This issue involves a great many layers but if anyone has had a similar issue I would be interested to hear.

We just had a longish discussion about networks and capture/editing.
Bottom line:
The slowest component in the network stream is the speed the network runs and not necessarily both ways. Check the specs of your specific gear.
I suspect this to be your problem. Here's a short extract.
Networking Limitations:
* When accessing the WD My Book World hard drives remotely using MioNet/WD Anywhere Access, please be aware that the transfer rate will be limited by whatever the slowest connection is. For instance, upstream rates for home users is typically no more than 512Kbps, even if the downstream rate is 4Gbps.
* If there is heavy I/O load put on the network and WD My Book World hard drive, it is recommended that a static IP address be used rather than DHCP.
Another thing of note was to use CAT 6 cable.
Al

Log and transfer with Canon cameras

Hello. Using Final Cut Pro 7 to edit my project.
I've been importing footage successfully from my Canon 7D using the Log and Transfer plugin.
I tried to do the same with new footage from my Canon Powershot S100. I receievd this error:
"contains unsupported media or has an invalid directory structure. Please choose a folder whose directory structure matches supported media."
I transferred the files from camera --> external hard drive keeping the original file structure. is there another way I should be importing footage from a non-EOS camera?
Thanks!

I'm not aware of any plugin that Canon has for the S100 but you may want to check on that. If they don't, it would be best to convert the footage to ProRes 422 prior to importing into an FCP project.
-DH

Log and Transfer w/ Canon HF20 FCE

I have the canon hf20 It worked perfect with imovie 09,
I just bought Final Cut Express, I can't get it to log and transfer for the life of me. Is final Cut Express 4 and Canon HF20 compatible?
How do you import video / log and transfer?
I can't find the answer anywhere!

I have a Canon HF S100 and am also running into the problem. It will bring my clips up but when I drag them over after setting up an in and out it says there is no data.

Log and Transfer Issues - Canon HF10

I have just recently acquired a Canon HF10 video camera and have had success getting some of the video to my Mac via log and transfer, however when the video files seem to be much longer than a few minutes the process fails. The status bar while it's transferring makes it all the way to 100%, but the file itself never moves up to the browser. When I click the file in the log and transfer window after the status bar has stopped moving I get a red exclamation mark with unknown error. Any help on this will greatly be appreciated.

I believe I have figured out what the issue is. I was using an old 250Gb external as my scratch drive. Well - this drive is in FAT format and I just discovered that the FAT drives are limited to 4GB limit, hence the reason I couldn't transfer my larger files. I'm planning on reformatting this drive to Journaled OSX and I should be cool.

I'm trying to log and transfer from a pro res file (HQ) final cut s7 is telling me it is an unsupported format. What the?

i have a 58 min pro res hq file that is a .mov. it is in a folder on my hdd. i'm trying to syn rushes by logging and transferring clips from this file but i cannot bring the said file into log and transfer. final cut putsup a window that tells me the file is in an unsupported format. and to bring in a file with a supported pathway. this i do not understand. any simple explanation as to what i'm missing?

Thanks meg. I'm trying not to have to sync all the rushes in a timeline. All rushes are in the one 58 min prores file. I wanted to, I guess, log and capture the rushes as clips that I logg in the log and transfer winnow and that it would then log and sort out the material as proxy files. I'm guessing I'm just being lazy or it can't be done. Thanks for the reply but I was looking for a differentbway round than a straight import of the whole file.
M

FCE Log and Transfer with Canon Vixia HF11

I've recently upgraded FCE. Before the upgrade I had no problems with log and transfer. I have changed absolutely nothing on my camera or computer other than the upgrade. Now when I try to log and transfer the files are in the window but I get a red icon that indicates they won't download. Are there simple fixes here? I don't understand most of the terminology used on these sites. I just know that it worked before I upgraded and doesn't work now. Thanks

Go to the Log and Trnasfer window and find the Settings icon (a small gear wheel).
Change the audio from Martix to Plain Stereo and try again.
Al

Log and transfer from HDR-SR11 Sony

Dear All,
I am trying to import a video from a HD CAMERA HDR-SR11, but the size of the imported video is too heavy, I am getting 1GIGA per minute. Does anyone know how to reduce the file size during the importing process, perhaps reducing the quality?
The format that I am getting is Apple ProRes 422, 1440 x 1080 (1920 x 1080), Millions
16-bit Integer (Little Endian), Stereo (L R), 48.000 kHz.
Thanks a lot for helping.
All the best,
Nicko
Message was edited by: San Nickolasito

Shouldn't be the same size of the file in the camera?
Hey Nicko,
No mate. The camera format is a heavily compressed MPEG4 variant (AVCHD). This is a modern acquisition format, and not a camera native edit format supported directly within FCP. The AVCHD support offered by FCP is through Log and Transfer which transcodes the files to a more edit friendly format that you can work with. The choices at present are AIC and ProRes. You could recompress them again if you wanted to a more compressed (smaller) format, but you'd lose time and quality, and disc space is cheap these days.

Log and Transfer from FTP?

I am trying to Log and Transfer video from an FTP connection. Unfortunately, FCP does not seem to be able to accept my CyberDuck connection as a valid path.
Is there any solution out there that will allow me to directly Log and Transfer video from an FTP server?

Thanks for your response.
Downloading first works fine; I'm just trying to avoid that additional step.
I also don't want our editors to having to deal with an extra version of the material. Is there a 'delete after transfer' option somewhere that I'm missing? That would at least take care of the extra version problem.

Must I "Log and Transfer" from Canon HG 10?

Similar Messages

Maybe you are looking for