Must render everything in Premiere Pro before sending to Encore?

I think the answer is no, I DON'T have to have EVERYTHING in the Premiere Pro sequence that I'm sending to Encore completely rendered as I don't think I see any problems BUT am I missing something?
Thanks in advance for guidance here.

Moral: don't walk away! Ha, ha!
All rendering does is create preview files. This helps realtime playback. In the end, you don't want to use those when you transcode (create the actual file that will be used as the final product).
Dynamic link simply creates a link to one of the PR sequences, and when it is time to create the DVD format, Encore (or since CS5 you have the option for Adobe Media Encoder) will transcode the PR sequence into a file that EN will use to "build" the disk.
You need to look at some of the threads on Macs and external drives. Sorry, can't point you to a specific one, but I suspect someone else can.
http://forums.adobe.com/community/premiere?view=overview
Edit: Here's a post that explains a bit of this differently. There are lots of particulars, and you have the choice of using your preview files. But the prevailing wisdom is that you get better quality if you use "maximum render quality" which does not use old preview files.
http://forums.adobe.com/message/4261546#4261546

Similar Messages

How to increase render speed in premiere pro

Hey Everyone,
Is there a way to speed up the render time in premiere pro? I do realize on my mac the processor isn't the fastest. I have 8 gigs of ram and But, I have all other programs closed, I only have premiere running and I don't have a lot of special effects. I only have some keyframes but nothing complex. Does anyone know what is going on? Every time I make a small change it takes hours to render a small section. When I started this project it didn't take as long. I only select the option to render the change I just made and not the whole video. Does anyone have any suggestions? Thanks in advanced and an intel core 2 duo processor which sin't the fastest but for a small change and a simple video 4 hours to render a section is ridiculous and frustrating and this didn't happen before.

There are two primary things you can do to speed up rendering.
1. Get a faster CPU
2. Turn on hardware acceleration. (Or if already turned on, get a faster GPU.)
There are some secondary actions you can also do.
1. Add more memory.
2. Get more/faster hard drives.
And finally a third method which may have some limited application.
1. Avoid QuickTime.

Integration of other Adobe products..Premiere Pro, After Effects, Audition, Encore DVD

Prior to obtaining CS2 I have been working with the other video/audio Adobe tools; Premiere Pro, After Effects, Audition, Encore DVD.
I fully expected to see integration of these products into the Bridge application after CS2 installation. I was disappointed, there does not appear to be any such integration. I do hope that this is in plan, and that I don't have to spend an "upgrade" fee to use integration that should have been there to begin with.
Even if there is no further integration, it would be nice to be able to continue using the Bridge as my "file manager" in the event I have to transfer my CS2 activation to another computer; after all I still have 4 licensed Adobe products installed on the machine, even if there not, quote, CS2 applications.

I can't use Bridge with my video products anymore. I have 3 systems in my personal development environment. I am now past the 30 day period before activation of CS2 is required on my video editing machine. Now I am no longer able to use Adobe Bridge with my other Adobe (video) products.
Also, now I've noticed that the next level of video products is available, they now have Bridge integrated. As I anticipated in my first append, I cannot continue using Bridge with my Adobe video products unless I spend more money for an upgrade. If the intention is to have Bridge become an integral tool in the creative process, this policy is short sighted. It can't be that difficult to bring out an update for the CS2 level of bridge that would enable it to work with users that have AE 6.5 or PPro 1.5 installed.

Premiere Pro CS4 (which includes Encore CS4) Failed to install

HI everyone, I am trying to reinstall Premiere Pro (which also includes Encore CS4) since I seem to be having some problems with the Blu-ray authoring in Encore. I uninstalled Premiere Pro from the Add/Delete Programs in Win XP Pro Control panel. After uninstalling, I'm trying to reinstall Premiere Pro/Encore programs. However, I'm getting an "Error Code 2" for Dynamic Link, Encore CS4, Encore CS4 Codecs, and the Encore US Language Pack. Then the install stops and fails to complete the installation.
Anyone have any ideas what's happening here? My system specs are below. I don't know what's wrong in order to fix it.
~thanks, Gail
Win XP Pro SP2
Q6600 Quad Core Processor
4gig ram
X1950 Pro Video Card
PK5 Deluxe ASUS MoBo
Not connected to internet. No anti-virus software, firewall, or internet/Lan connected or activated.
Internal 7200 hard drives.

I'd just suggest to run CS4 clean tool one time or (better) twice, after uninstallation.
http://www.adobe.com/support/contact/cs5clean.html
In this way you can clean register also.
Good choice to switch off antiviruses.
Take also a look to the disks, are they clean?
Ciao
Giorgio

Pas d'import de séquences Adobe premiere pro CC dans Adobe Encore CS6

Bonjour,
Je viens de créer un gros projet dans PP CC, projet acec 7 séquences différentes.
Impossible d'importer les séquences dans Encore CS6 : dynamic link démarre, puis plus rien.
L'import a fonctionné avec des photos jpg, des vidéos m2ts, de la musique m4a et mp3, mais rien avec les séquences PP CC.
Le résultat est toujours le même quel que soit le chemin choisi pour réaliser l'import :
- Importer une séquence Première Pro,
- importer comme élément.
Merci de votre assistance,je ne souhaite pas refaire mon projet avec PP CS6

Bonjour,
Merci pour le lien. J'avais vu juste après le post.
Cordialement.
Le 04/12/2013 22:28, aminagodum a écrit :
>
Re: Pas d'import de séquences Adobe premiere pro CC dans Adobe
Encore CS6
created by aminagodum <http://forums.adobe.com/people/aminagodum> in
/Forums en français/ - View the full discussion
<http://forums.adobe.com/message/5901132#5901132

Premiere Pro not sending files to After Affects "The importer reported a generic error"

Hi all,
I just recently purchased PP & AE CC. putting together my first project on my new laptop and when i go to right click a clip on my Premiere pro timeline and proceed to push "Replace with after effects composition" It swaps to After Effects but nothing loads, i alt tab back to Premiere and it displays me the message "The importer reported a generic error"
If it's any help the footage is from my A7S filmed in SDXC format. everything works fine within the project. I've tried logging out and in of my adobe account updating restarting etc. had no luck.

Hi Brandon,
ascarib wrote:
After doing the reboot my computer gives me the "You can't use this version of the application "Adobe After Effects CS6" with this version of OS X. Nothing has changed on my computer but it was fine before. What else can we try? Thank you for your patience.
Make sure that you update After Effects: Can't launch | Mac OS X 10.9 (Mavericks)
Thanks,
Kevin

Dramatically slower encode/render times from Premiere Pro CC 2014 via both AME 2014 and direct export via PP

My recent update to Adobe CC 2014 apps has been an unmitigated disaster. Was running the 2013 version until last week and everything was just dandy. Very good performance and excellent render/encode times even for stuff with lots of filters and fx.
Since update 1-2 min videos with no fx or filters (or even transitions) have gone from exporting in under two minutes to well over 25 minutes. These exports are with the same presets I regularly use (Vimeo 720HD H.264).
I've been poking around the forums here for two days looking for answers and can't find anything that works. Tried the whole "App Nap" toggle as well as a few other tips. Didn't do squat. Looking for any hints/answers. Thanks.
Mac Pro Mid 2012
2 x 2.4 GHz 6-Core Intel Xeon
32 GB 1333 MHz DDR3 ECC
ATI Radeon HD 5870 1024 MB
OS X 10.9.5 (13F34)
System SSD 500GB
Cache SSD 500GB
Media HD 1TB

Hi MXSw,
MXSw wrote:
All right. More experimentation has been done. Seems like the renaming of Adobe folders fix prescribed in the link below might have helped a bit.
Premiere Pro CC 2014 renders are painfully slow.
You can rename folders, but I prefer to do it this way: Premiere Pro CC freezing on startup or crashing while working (Mac OS X 10.9, and later)
MXSw wrote:
Kicked out a 1 minute edit with some color/fx in under 10 minutes. Not as fast as in the past but at least the CPU seemed to be cranking at 500% and above per Activity Monitor. Its barely gone over 250% in previous attempts.
That sounds a lot better.
MXSw wrote:
Same 1 minute edit took 35 minutes however when I exported from a PP timeline using MXF clips instead of QTs. I assumed the QTs would speed up the process but in the past I've gotten great performance on big old RED raw files so still a bit of mystery why I can't approach the speeds I had prior to most recent CC update.
Maybe updating your project file has something to do with it. I'll keep my eye on this issue. Thanks for reporting.
Regards,
Kevin

Why is my animation pixelated when I render it in Premiere Pro?

I have an animation I want to edit together with some mts and mov files in Premiere Pro. My AE settings are HDTV 25 and I use square pixels. When I export I used optimal settings and tried it both in avi and in mp4. My Premiere Pro settings are AVCHD 1080i25, also with square pixels. When I import the animation and interpret the footage, it looks fine. But as soon as I render the video, it becomes a bit blurry (I can see it in the parts with the text). At the same time, when I play the animation in a video player, it is crystal clear, so it can't be the quality of the screen shots I was animating, they are sharp. And the video is only supposed to be for the web. Does anyone know what I'm missing here?

Betharoo
Thanks for the reply.
Please check out John T. Smith's information.
At this point, if you could tell us the file extension of the file involved, that would give us a start while you are
gathering the rest of the details.
You can easily get some information for us from Properties for your imported video that is blurry in the Editor.
1. Click on Expert to get into the Expert workspace of Premiere Elements 13
2. If you have not already, import your file into the program using Add Media/Files & Folder/Project Assets.
3. Open Project Assets to see a thumbnail for the video that you just imported. Right click that thumbnail,
and select and click on Properties from the menu that opens.
4. Tell us what is listed there is Properties - it should look something like this one which is specific for one of my wmv files.
Your information will be specific to the file that you right clicked in your Project Assets.
From what you have written so far, yours should show
Image Size 1920 x 1080
Frame Rate either 59.94 or 60
Also, please go to Edit Menu/Project Settings/General, and tell us what you see for
Editing Mode
Timebase
Frame Size
Pixel Aspect Ratio
even if the fields look grayed out.
Your project settings may be contributing your Edit area previewing problems.
All of the above will keep us moving forward in the troubleshooting.
Thanks.
ATR

Premiere Pro Direct Send to SpeedGrade; Error Box Footage Couldn't Be Found

I recently did a clean install and now when I try to send a clip from Premiere Pro to SpeedGrade the following happens:
SpeedGrade Opens As Normal
SpeedGrade displays a large red boxIndicates the The Sequence / Video File could not be found
The same effect happens with MXF C300 Clips, 5D MK3 clips and Atomos DNxHD Clips.
System Specs:
i7 Hex Core @ 4.3Ghz
64GB DDR3 @ 1800Mhz
Quadro 5000
Tesla C2075
WIndows 7 SP1
Adobe CC

Hi,
Do you work with an external drive?
Thanks,
Fran

Long render time with premiere pro CS5 lately, help!

lately my premiere pro CS5 render extremely slow
i have a 6GB ram 64bit windows 7
is it normal to render a 10 minutes quicktime/h264 codec in 5 hours?
please take a note that this happened recently, so i think my pc spec. should not be the problem
thanks in advance

You start off with the wrong sequence settings. To resolve that, right click on a clip in the project panel and select 'New Sequence from Clip". That will give you the correct sequence setting for your source material.
When exporting, never use QuiRcktime, since it is a 32 bit application, plagued with numerous severe problems, hence the name. Use plain 64 bit H.264 codec for exporting. If you use Maximum Render Quality, your export can take many times longer than without that checked.
Your memory and presumably the rest of your system (please give details) is not up to this task, especially not when you start with the wrong sequence settings, export with a 32 bit codec and have MRQ turned on.

Render crash in Premiere Pro CC Windows 8.1

When I try to render 3 minutes of video with Premiere Pro CC with Windows 8.1 it says "Insufficient memory" and close program.
I set optimizes performance to memory (and not CPU)
I set the maximum virtual memory on Windows.
My computer is 8 core and it has 8Gb RAM (6 dedicated to Premiere)
What have I to do ?

Please monitor memory usage in Task Manager while encoding. Does it ever get near the top of the graph?
The "Insufficient Memory" error is sometimes a red herring.
Have you tried both export paths? In the Export Settings dialog, the Export button (a.k.a., in-process encoding) and the Queue button (which queues the job to AME).
If you have GPU acceleration enabled, please set it to Software Only and try exporting. (In AME, as of CC7.1, you can now change the Renderer setting via a control in the bottom right corner of the Queue panel; in prior versions, the setting in Premiere Pro controlled AME's behavior in this regard.)

Raytraced 3D does not render from within premiere pro

Mac OSX 10.10.1 + Premiere Pro 2014.2
Using Dynamic link to a 3D Camera track a HD sequence, I attach some text and switch on Ray Traced 3D to get a bevel effect. All works well in the software.
But when I render out from within Premiere and from within Media encoder, the text comes out with no bevel as if the Ray Traced 3D is turned off.
Anyone else getting this?
Any workarounds?

I see, odd that it shows up as 3D inside Premiere Pro when you are playing back the timeline!
Is there a list somewhere of what doesn't work with Dynamic Link inside Premiere Pro ?

Schlechte Render Qualität Premiere Pro CS6

Hi,
ich habe folgendes Problem. Wenn ich eine Vorschau in Premiere Pro CS6 rendere ist diese von miesester Qualität. Ebenso die Ausgabe z.b. als ProRes422HQ oder Animation Codec.
Ich habe z.B. eine PNG Sequenz (oder Sony XDCam oder 5D H264) und blende am Ende ab ins Schwarz. Die gerenderte Vorschau der png Sequnez ist voller Artefakte (bending), die Blende ins Schwarz sieht katastrophal aus mit gleichen Artefakten.
Ungerendert sehe ich ein scharfes, klares Bild. Gerendert nur Schrott. Der Export sieht nicht besser aus.
Ich habe die Sequenzeinstellungen geändert, die Render Einstellungen alle durchprobiert. Maximale render Qualität eingestellt, es mit Max Bittiefe probiert - es wird nicht besser. Wenn ich meine png Sequenz im Quicktime Pro als H264, ProRes422HQ etc. ausspiele sieht die so aus, wie ich es mit vorstelle.
Für eine gute Qualität habe ich meinen Film aus Premiere jetzt als tga Sequenz expotiert, in Quicktime in einen ProRes422HQ gewandelt, in Final Cut den Ton angelegt, als ProRes422HQ wieder ausgespielt und in Quicktime und Episode in mein gewünschtes Format gewandelt. Ginge doch einfacher, wenn Preniere das von Anfang an gut machen würde.
Hat jemand nen Rat oder selbige Erfahrungen gemacht?
Viele Grüße
Frieder
MacPro, 3,3ghz 6Core Xenon, OSX 10.7.5, ALA Kona 3G, NVIDIA Quadro 4000, Adobe CS6

minutes & seconds.

Slow render time in Premiere Pro CS4 (with fast computer?)

Hello people on the Adobe Forums,
I hope someone can help me with this question, it's been bothering me a long long time now and this week i have to make a decision, or fix the problem and keep this configuration, or spend money for a new cpu (i5 750) and a new motherboard. But i think this computer should do better then it does. I have the following configuration:
AMD Athlon X2 4600+
Nvidia GeForce 7800GTX
2× 1Gb OCZ memory (DDR, PC2400, 250mhz)
Storage Disks:
Seagate 320GB SATA (7200, i think)
WD 74GB SATA (10.000RPM, OS)
Hitachi 500GB SATA (also 7200, i think)
WD 1TB USB (SATA) (extern hdd)
WD 250GB SATA (7200, i think)
So, i don't understand the problem, Premiere is running very slow on my computer.. The rendering of a 5min piece of just a random movie takes like 3 hours! Just right now i am rendering some things I filmed with my mobile, it does like 1 frame in 10sec!! On most pc's with this vice versa!
So the cpu is not that old, and neither is the videocard, meaby the memory is a little bit low.. Could that be the problem?
Hope you people can help me out, i searched Google and everywhere but can't find anyone with this problem..
List of software:
- Windows 7 Ultimate
- Adobe Premiere Pro CS4
Drivers are, as far as i know, all up to date, i updated the Adobe programs too..
Describe source material, Codec: XDCAM-EX Movie (mp4)
But like i said, it happens too avi too, it think that was DivX..
I bought this pc second-hand, so it could be that something in the processor is already broken and i didn't notice it at all.. i searched like everywhere and also tried too reinstall the program but that doesn't work either..
Some more info:
http://www.creadion.nl/premiere/info.jpg
http://www.creadion.nl/premiere/info.nfo
http://www.creadion.nl/premiere/DxDiag.txt
Ohye, and the PPBM: http://www.creadion.nl/premiere/Output_PPBM4.txt
With friendly regards,
Marinus

Well, I'm helping other people too here on some dutch foras and i hate how people say things like "Doesn't work. Help" and just wait and wait for someone to answer. Plus i want to order my new hardware this evening (10:27pm now here), so meaby that's a 'cause' too, to make you people answer fast! (and it worked! hehe)
So, what i am thinking of right now is to upgrade the motherboard, cpu and ram.. The videocard can wait a little more:
- Motherboard: MSI P55-GD65 (not sure of this one, good reviews&tests, Asrock P55 Extreme is an option too.. be my guest to do another recommendation) (Asus P7P55D seems like a good option)
- CPU: Probably an I5 750 from Intel, heard good things about this one.. Although i've always used AMD..
- RAM: I really don't know, don't see many differences between the RAM sticks.. But yeh: OCZ Gold OCZ3G2000LV4GK
Sorry for no links to product pages, you have to do a little search, i only got some dutch websites, and i know for sure that you all having you're own comparing/specs websites (which i don't know) .
Thank you very much untill now, meaby i get another reply tonight.. Ohye, plans changed, i'm not ordering tonight anymore.. I'll do that tomorrow morning (I'll do a few calls to a view webshops and see if they got in stock, if so, i'm gonna drive (or go with bus) to one of them.. I need it really really quick, need to submit a project from school August 30
Thanks everyone!
Just took a look at the links you gave me, the Asus P7P55D is an option too!
Took a look at the links, added the "Asus P7P55D".
What i forgot to mention: I got a budget with a max of like €400,- (That's like 510usd, I don't even really have the money) so I can't buy a whole new pc..

How to export Premiere Pro CC projects to Encore

I've tried the route of exporting picking the MPEG2 DVD option, but my video looks horrid. I tried importing my sequence to Premiere CS6 in order to "send to encore" via dynamic link. Unfortunately it won't read the sequence. Why won't Adobe just add "send to encore" via dynamic link like before? I spend 13 hours off and on yesterday just trying with Adobe reps over phone to get Encore to work. This is really kililng me right now. My clients are not happy. They want their DVD and bluray and I can't deliver. NOT COOL!

Dynamic Link from PProCC to EncoreCS6 does not work
http://helpx.adobe.com/encore/kb/encore-cs6-installed-cc.html
-http://tv.adobe.com/watch/davtechtable/using-premiere-pro-cc-encore-cs6-for-bluray-dvd-and -interactive-video-for-ipadatv-and-mobile-hd/

Must render everything in Premiere Pro before sending to Encore?

Similar Messages

Maybe you are looking for