Mustek 2400 installation

Hi
Have just purchased a Mustek ScanExpress A# USB 2400 Por and cant seem to install it. I'm on a 2.4ghz imac running 10.6.8. I'm on image acquire, have installed the drivers for this os, the scanner name appears in the ImageAcquire drop down box, but when i click on it it says scanner not connected. I know the scanner works because i took it into work and tried it on a similar system and it worked. Any hints ot there on why it's not talking to my mac?
Thanks

http://www.penciljack.com/forum/showthread.php?117283-Mustek-A3-2400-pro-and-CS6 -on-a-Mac
may have the solution you need. Image Capture has a preference for TWAIN which may help if you don't have Photoshop.
If none of the driver options on my FAQ*:
http://www.macmaps.com/macosxnative.html#SCANNER list their company, contact them directly.
http://www.mustek.com/mustek/ContactSupport.php
Their website does not show Macintosh drivers, and the built-in drivers on Mac OS X don't list them either:
http://support.apple.com/kb/HT3669

Similar Messages

Mustek scanner 2400

I just brought a Mustek A3 USB 2400 pro scanner and the software does not work with my new imac lion 10.7.2 software. Apple helpline did not find anything to help me but eventually I found on the Mustek website under support, downloads, search 2400, image acquire software which worked fine. The Twain one does not. Good luck!

bonjour je vous réponds plus longuement en français
j'ai deux scanners un Epson Perfection 750 Pro et un Mustek 2400 A3
Depuis Snow Leopard je me servais de ImageAcquire de Mustek pour utiliser l'un ou l'autre
de ces deux scanners
Depuis Lion seul Epson était vu par ImageAcquire
Lorsque j'ai installé le driver du 600 il est apparu dans la fenêtre de ImageAcquire
mais il était déclaré c homme non alimenté
j'ai alors réinstallé le driver du 2400 et il est reconnu et fonctionne parfaitement
Je ne saurait pas vous dire pourquoi
j'utilise un IMac 24" 6,1 2.33Ghz
P Parrot
trad google
Hello I will answer more fully in French
I have two scanners an Epson Perfection 750 Pro and a Mustek 2400 A3
Since Snow Leopard I used ImageAcquire Mustek to use either
of these two scanners
Since Leo was seen only by Epson ImageAcquire
When I installed the driver from the 600 he appeared in the window ImageAcquire
but he was declared man c unpowered
I then reinstalled the driver of 2400 and is recognized and works perfectly
I can not tell you why
I use an iMac 24 "2.33GHz 6.1
P Parrot

Cannon printer compatibility

Hi,
I have tried OS X Yosemite 10.10 on my mac book pro 17" early 2012 over last weekend and it was a bit of a disaster. I have been running it on Mavericks till then and had connected several peripherals: Cannon LBP 3500 A3 mono laser printer, Cannon LBP 6000 A4 mono laser printer, Brother A4 colour laser printer, Cannon LIDE 210 A4 USB scanner and Mustek 2400 A3 scanner, plus Dell 23" LED monitor and of course apple keyboard, mouse and track pad. All Cannon peripherals failed to work. I have tried to download latest version of drivers and for LBP 6000 i got version 3.67 but it would not work either. Talking to Cannon rep somewhere in the ether they said no updates for my printers will be available as there is no demand (sic). What a waste they are just 2-3 years old. Muster and Brother units worked well. Also all peripherals are connected via 2 USB2 hubs (pro book has only 2 usb2 ports) which started to play up as well while on Yosemite. Since then i had to reverse to Mavericks thanks to time machine the whole system just rolled back and within 2 hrs all was up and working. Does anyone have any suggestions on what can be done? I would like to upgrade to Yosemite soon. I have noticed some posts on having same problems with Yosemite and cannon lbp 6000 but it does not seem to be resolved yet. And i have fusion 7 with win 7 on book pro too.
Thanks

Thanks, I have checked the Sys Info utility and here is the screen shot of what it showed. I had all peripherals turned on and it shows all 3 printers and cannon scanner but does not show Mustek scanner which is on and works, funny, any explanation? So if i had the other book pro with Yosemite and all peripherals connected and switched on would Sys Info app show me whether all is working? Is there any diagnosis app i could run to check for any problems with USB hubs? I am not sure whether there have been any USB hub problems reported so far with Yosemite.
show

Advice, please, on installing Mustek A3 2400S scanner

Can anyone suggest the links I need to instal a Mustek A3 2400S scanner on OS 10.9.2?
Thank-you

download
From their Web page.

Mustek scanexpress a3 usb 2400 pro

Hi,
So at work I was trying to hook up this scanner I have near my station, a mustek scanexpress a3 usb 2400 pro, but I can't detect it.
I downloaded the latest drivers off the Mustek website and I tried using Vuescan, Image capture and Photoshop to see if I could get it to work, but nothing.
It wasn't detected in the preferences Scanner and Printer utility.
My coworker who runs a windows machine got it to work without any issues.
Anyone have any good fixes for this?
Thanks

Templeton Peck wrote:
Mustek scanners are awful and they have never fully supported Macs...
And you get what you pay for. Good quality Epson and HP scanners are so cheap these days, I suggest you just save yourself the hassle, get one and return the Mustek.
Thanks Templeton, but I think the image quality would be below the standards of even a value brand company such as Mustek. It does scan, but I am wondering if some setting is off or even if there is a hardware issue.
I was aware of Mustek's questionable reputation when ordering the scanner, but there were enough good reviews warrant giving it a shot. Cost is an issue and you you can find an A3 or larger scanner that works with the latest OS X for well under $1000, I'd be interested. As it is, I don't have the $2000+ that it looks like it would cost.
Thanks.

Why isn't my Mustek a3 2400 USB scanner showing up under import? CS6- Windows 7

Hi there.
The scanner driver still appears to be the latest one Mustek has for Windows? When I plug the USB plug in the scanner chimes as usual and it's funkly scan module pops up as usual, but when I open CS6 and go under file>import it doesn't show up?

All versions of Premiere (Pro and Elements) only work with Firewire, not USB
If you are asking about Photoshop, you need to go to that forum and ask about twain driver support
How to Select a Forum http://forums.adobe.com/docs/DOC-1015

Please help. I have just purchased a Mustek A3 usb 2400 scanner and cannot find drivers for maverick

I am very frustrated ... have spent two hours searching for drivers for a driver for this scanner ... no idea what to do.
Would greatly appreciate any help.
Thank you.

I can now see it in Image Aquire ... image capture does not see it nor does VueScan.
Image aquire is a horrible program. It crashes continually.
I still have no idea where the driver files that I have downloaded are. I cant find them anywhere. Admittedly I know very very little about how the computer runs ...I just use the programs. And, I believe reasonably, that when I purchase a product that it will work on my operating system. The business that I purchased from will be open tomorrow and I will ring them. If I cannot sort this out I will have to return it.

Mustek ScanExpress A3 USB 1200 Pro Flatbed Scanner

Has anyone experience with this scanner? At newegg.com the price ($165.99) looks good and the document size 11.7"x16.5 seems great for music which is often larger than letter size.

G'morning!
Hardy, I came very close to downloading the wrong driver because the paperwork inside the scanner box was for the 2400 - I realized at the last minute that something didn't sound right and got the correct one.
Geoffrey, oh boy. I think that you have given me something to try and a heads-up to the reason it hasn't worked thus far. The link to the driver you gave is the very one that MUSTEK had me download. The driver that ADOBE had me download was here: (I hope but if the link doesn't work the name of the dmg is in it)
http://www.adobe.com/cfusion/search/index.cfm?loc=enus&term=PHSPCS4_ContLS1.dmg&siteSection=support%3Adownloads
In the file structure for PSe8, the folder Plug-Ins has 10 sub-folders. OK. The twain.plugin that came with the original installation of the PSe8 program was placed in a sub-folder called Import Modules (where it remains). The twain.plugin that I downloaded per MUSTEK's instructions, the same one you used, was placed at their instruction in a sub-folder called Extensions. The third twain.plugin (can you believe it?) that ADOBE had me download was placed at their instruction in a sub-folder called File Formats.
The one thing ADOBE had me do that Mustek did not, was to add the folder pointer under Preferences/Plug-Ins in PSe8.
The documentation that came with the package you used, and that MUSTEK recommended directs the plug-in to be placed in Import-Export. That sounds similar to the folder called Import Modules, where the program's own pre-installed plug-in resides.
I hope this is clearer than my own confusion makes it seem to me (keeping all the variations straight is making me dizzy). I am going to try to use the plug-in you are using, place it in the Extensions sub-folder that MUSTEK wanted and then add the folder pointer in preferences. I don't think I'm knowledgeable enough at this point to try replacing the program's original plug-in with the legacy version. I just don't know what other implications that would have.
Of course, I could use all this as the perfect excuse to treat myself to an upgrade to Photoshop.
I really appreciate the input you all have given me, and your patience with a newbie. While I do want the scanner to work, I am very much enjoying this as an opportunity to learn more about my Mac and how it works. A week ago I had no idea of "TWAIN" and laughed at the "Technology Without An Informative Name" and other versions. If I get something to work, I'll post the specifics of what went where to make it happen.
Thanks! MJ

Installation problem 8.0.5 on RH6.2

I've installed this many times on various Dell machines with no problems, following the guide on jordan.fortwayne.com.
However, I am having problems with the latest box from DELL. It's poweredge 2400 with RH6.2.
Upon creating database objects, the installer takes a long time and the proceeds with the error message. The log file contains the following error:
ORA-00445: background process "PMON" did not start after 120 seconds.
I followed the guide as usual. I had a small problem with rpm's because the rpm kept saying that rpms were installed, while when i tried doing rpm erase, it was saying they were not installed. I decided to force install by doing rpm -ivh force <name>. In either case, binaries don't core dump at this point. I can enter sqlplus and it gives me log in prompt. Interestingly though when I type exit it just hangs.
Any help would really be appreciated.
Thanks

Try putting
disable_oob = ON
in your sqlnet.ora file.
Anwar.
Radek Sedmak (guest) wrote:
: Hi Everybody,
: I have this problem, i have running oracle 8.0.5 on RH6.0
: everything works ok for me. But when i use sqlplus on box where
: is my Oracle running and try to connect to another database on
: my site (which is running on HPUX) I got resul ORA-01017
invalid
: username/password. Tnsping to this machine is ok, so i have
this
: in my tnsname.ora When i create dabase link (with user which I
: try to use to connect remote database) on my local datbase to
: this database then link works sucessfully too. select * from
: dual@remote_database Ok. What's wrong ??? Remote database is
: Oracle 7.3.4.3 on HPUX. Any difference between SQL*Net of
: Oracle7 and 8 ???
null

ATI driver installation issue with Windows Vista on Boot Camp (new iMac)

I've just purchased a new 20" iMac with Core 2 Duo 2.4GHz.
Then I installed Windows Vista Ultimate on a Boot Camp partition.
Vista installation was eventless and worked nicely.
Now the problem has begun...
I downloaded the latest ATI graphic card driver (Catalyst 7.7 for Vista 32) from the ATI website. The Catalyst software did not recognize the graphic card and installed nothing. I still have generic Microsoft standard VGA video adapter, which keeps me from playing any recent 3D games...
Someone please help me on this so that I can start playing Oblivion...
Message was edited by: Giraku

Hi and welcome to Discussions,
I still have to find a verification for this, but:
Aplle has up to now always used the Mobility versions of the ATI and NVIDIA graphics chips in the iMacs and MacBooks, MacBooks Pro.
I assume that the in the new imacs, they are also using the Mobility version of the Radeon 2400/2600.
The ATI drivers you can download from the ATI/AMD website are only suitable for the Desktop Radeons, NOT for the Mobility Radeons.
ATI/AMD does not provide drivers for the Mobility Radeons, but are refering to the Manufacturer of the Computer for Drivers, which is Apple.
Sorry to say, but it seems you have to wait for a new BootCamp version which you include Driver support of the new iMacs.
Sorry
Stefan

How do I get my new Mustek scanner to work over Airport Extreme?

We can't get our new scanner to even show up over our wireless network.
When I hook it straight to my iMac (2.8 GHz Intel Core Duo, OS X 10.6.8 [Snow Leopard]), I can use the enclosed software (ImageAcquire), but it does NOT show up either in ImageCapture nor can I add it via the Print & Fax preferences. When I hook it through our (previous generation) AirPort Extreme, it doesn't even show up in the ImageAcquire software that came with it, and I get the message that a cable is disconnected.
The scanner is a Mustek A3 ScanExpress 2400, and is supposed to work on Macs, since it has its own drivers. I have downloaded the most current drivers and software direct from the manufacturer. Apple doesn't have it listed in Software Update.
We have successfully run our HP scanner/printer over AirPort.
Any suggestions? Thanks.

When you say that you are hooking up the Mustek device, I assume that you mean via the USB port on the AirPort. Is that correct?
If you are connecting the Mustek device via the USB port on the AirPort Extreme, and the device does not appear when you click Print & Fax, that would likely indicate that Mustek has not provided network drivers for their device.
The USB port on the AirPort is far different than the USB port on a computer.
You might want to ask Mustek support if they have network drivers available for use on an Apple AirPort router.
Keep in mind that in almost all cases, only the print function is supported when you connect an all-in-one or combo device to the USB port on the AirPort Extreme.
Unless something has changed very recently, you will not be able to use the scan function when you connect your other HP device to the USB port on the AirPorts.
If you are connecting the HP using wireless only or via Ethernet, then you should have full functionality that way.

SAP R-3 IDES 4.71 installation with Oracle9i

Hello
I am having problems installing SAP R-3 IDES 4.71 installation with Oracle9i on windows 2003 Server. The log file comes up with this erorr
INFO 2008-05-14 22:50:30
Changed working directory to C:\SAPinst ORACLE SAPINST.
INFO 2008-05-14 22:53:59
See 'C:\usr\sap\DEV\SYS\exe\run/startsap name=DEV nr=00 SAPDIAHOST=bw2003' output in 'C:\SAPinst ORACLE SAPINST\startsap.log'.
TRACE
ProgramReturnCode='-1' means error.
ERROR 2030-05-14 22:53:59
MOS-01012 PROBLEM: 'C:\usr\sap\DEV\SYS\exe\run/startsap name=DEV nr=00 SAPDIAHOST=bw2003' returned with '-1' which is not a defined as a success code.
Windows 2003 Server
AMD 2GH Dual core
2GB Ram
250GB HDD
Computer name: bw2003
Central instance: DEV
I checked the host file system32/drivers/etc the IP adress and the host name is there.
I am hoping that someone could help me with the installation thanks in advance.
waiting .....

ok here you go
dev_disp
trc file: "dev_disp", trc level: 1, release: "620"
Sat May 18 00:27:08 2030
kernel runs with dp version 3(ext=1) (@(#) DPLIB-INT-VERSION-3)
length of sys_adm_ext is 304 bytes
systemid   560 (PC with Windows NT)
relno      6200
patchlevel 0
patchno    674
intno      20020600
pid        2276
***LOG Q00=> DpSapEnvInit, DPStart (00 2276) [dpxxdisp.c   978]
     shared lib "dw_xml.dll" version 674 successfully loaded
     shared lib "dw_xtc.dll" version 674 successfully loaded
     shared lib "dw_stl.dll" version 674 successfully loaded
MtxInit: -2 0 0
DpShMCreate: sizeof(wp_adm)          9776     (752)
DpShMCreate: sizeof(tm_adm)          1690816     (8412)
DpShMCreate: sizeof(wp_ca_adm)     18000     (60)
DpShMCreate: sizeof(appc_ca_adm)     6000     (60)
DpShMCreate: sizeof(comm_adm)     192000     (384)
DpShMCreate: sizeof(wall_adm)     (22440/34344/56/100)
DpShMCreate: SHM_DP_ADM_KEY          (addr: 042F0040, size: 1974816)
DpShMCreate: allocated sys_adm at 042F0040
DpShMCreate: allocated wp_adm at 042F0560
DpShMCreate: allocated tm_adm_list at 042F2B90
DpShMCreate: allocated tm_adm at 042F2BB8
DpShMCreate: allocated wp_ca_adm at 0448F878
DpShMCreate: allocated appc_ca_adm at 04493EC8
DpShMCreate: allocated comm_adm_list at 04495638
DpShMCreate: allocated comm_adm at 04495650
DpShMCreate: allocated ca_info at 044C4450
DpShMCreate: allocated wall_adm at 044C4458
MBUF state OFF
Sat May 18 00:27:09 2030
EmInit: MmSetImplementation( 2 ).
<ES> client 0 initializing ....
<ES> InitFreeList
<ES> block size is 1024 kByte.
Using implementation std
<EsNT> Memory Reset enabled as NT default
<EsNT> EsIUnamFileMapInit: Initialize the memory 307 MB
<ES> 306 blocks reserved for free list.
ES initialized.
***LOG Q0I=> NiPServToNo: getservbyname [ninti.c 428]
***LOG Q0A=> NiIServToNo, NiPServToNo ( sapmsDEV) [nixxi.c      2599]
ERROR => MsIAttach: NiBufConnect to bw2003/sapmsDEV failed (rc=NIESERV_UNKNOWN) [msxxi.c      545]
***LOG Q0L=> DpLoopInit, nomscon () [dpxxdisp.c   1451]
Sat May 18 00:27:18 2030
CCMS: Initalizing shared memory of size 20000000 for monitoring segment.
Sat May 18 00:27:32 2030
CCMS: start to initalize 3.X shared alert area (first segment).
Sat May 18 00:27:49 2030
***LOG Q0I=> NiPServToNo: getservbyname [ninti.c 428]
Sat May 18 00:27:50 2030
***LOG Q0A=> NiIServToNo, service_unkown ( sapmsDEV) [nixxi.c      2580]
ERROR => MsIAttach: NiBufConnect to bw2003/sapmsDEV failed (rc=NIESERV_UNKNOWN) [msxxi.c      545]
Sat May 18 00:28:09 2030
***LOG Q0I=> NiPServToNo: getservbyname [ninti.c 428]
***LOG Q0A=> NiIServToNo, service_unkown ( sapmsDEV) [nixxi.c      2580]
ERROR => MsIAttach: NiBufConnect to bw2003/sapmsDEV failed (rc=NIESERV_UNKNOWN) [msxxi.c      545]
Sat May 18 00:28:29 2030
***LOG Q0I=> NiPServToNo: getservbyname [ninti.c 428]
***LOG Q0A=> NiIServToNo, service_unkown ( sapmsDEV) [nixxi.c      2580]
ERROR => MsIAttach: NiBufConnect to bw2003/sapmsDEV failed (rc=NIESERV_UNKNOWN) [msxxi.c      545]
Sat May 18 00:28:49 2030
***LOG Q0I=> NiPServToNo: getservbyname [ninti.c 428]
***LOG Q0A=> NiIServToNo, service_unkown ( sapmsDEV) [nixxi.c      2580]
ERROR => MsIAttach: NiBufConnect to bw2003/sapmsDEV failed (rc=NIESERV_UNKNOWN) [msxxi.c      545]
Sat May 18 00:29:09 2030
***LOG Q0I=> NiPServToNo: getservbyname [ninti.c 428]
***LOG Q0A=> NiIServToNo, service_unkown ( sapmsDEV) [nixxi.c      2580]
ERROR => MsIAttach: NiBufConnect to bw2003/sapmsDEV failed (rc=NIESERV_UNKNOWN) [msxxi.c      545]
ERROR => W0 (pid 2328) died [dpxxdisp.c   11523]
force unlock of wp_adm mutex W0
ERROR => W11 (pid 2416) died [dpxxdisp.c   11523]
force unlock of wp_adm mutex W11
my types changed after wp death/restart 0xbf --> 0xaf
ERROR => MsIModTypes: not_attached [msxxi.c      1567]
Sat May 18 00:29:30 2030
***LOG Q0I=> NiPServToNo: getservbyname [ninti.c 428]
***LOG Q0A=> NiIServToNo, service_unkown ( sapmsDEV) [nixxi.c      2580]
ERROR => MsIAttach: NiBufConnect to bw2003/sapmsDEV failed (rc=NIESERV_UNKNOWN) [msxxi.c      545]
ERROR => W5 (pid 2368) died [dpxxdisp.c   11523]
force unlock of wp_adm mutex W5
ERROR => W6 (pid 2376) died [dpxxdisp.c   11523]
force unlock of wp_adm mutex W6
ERROR => W7 (pid 2384) died [dpxxdisp.c   11523]
force unlock of wp_adm mutex W7
my types changed after wp death/restart 0xaf --> 0xad
ERROR => MsIModTypes: not_attached [msxxi.c      1567]
Sat May 18 00:29:49 2030
***LOG Q0I=> NiPServToNo: getservbyname [ninti.c 428]
***LOG Q0A=> NiIServToNo, service_unkown ( sapmsDEV) [nixxi.c      2580]
ERROR => MsIAttach: NiBufConnect to bw2003/sapmsDEV failed (rc=NIESERV_UNKNOWN) [msxxi.c      545]
ERROR => W2 (pid 2344) died [dpxxdisp.c   11523]
force unlock of wp_adm mutex W2
ERROR => W8 (pid 2392) died [dpxxdisp.c   11523]
force unlock of wp_adm mutex W8
ERROR => W10 (pid 2408) died [dpxxdisp.c   11523]
force unlock of wp_adm mutex W10
ERROR => W12 (pid 2424) died [dpxxdisp.c   11523]
force unlock of wp_adm mutex W12
my types changed after wp death/restart 0xad --> 0x89
ERROR => MsIModTypes: not_attached [msxxi.c      1567]
Sat May 18 00:30:09 2030
***LOG Q0I=> NiPServToNo: getservbyname [ninti.c 428]
***LOG Q0A=> NiIServToNo, service_unkown ( sapmsDEV) [nixxi.c      2580]
ERROR => MsIAttach: NiBufConnect to bw2003/sapmsDEV failed (rc=NIESERV_UNKNOWN) [msxxi.c      545]
ERROR => W1 (pid 2336) died [dpxxdisp.c   11523]
force unlock of wp_adm mutex W1
Sat May 18 00:30:29 2030
***LOG Q0I=> NiPServToNo: getservbyname [ninti.c 428]
***LOG Q0A=> NiIServToNo, service_unkown ( sapmsDEV) [nixxi.c      2580]
ERROR => MsIAttach: NiBufConnect to bw2003/sapmsDEV failed (rc=NIESERV_UNKNOWN) [msxxi.c      545]
Sat May 18 00:30:49 2030
***LOG Q0I=> NiPServToNo: getservbyname [ninti.c 428]
***LOG Q0A=> NiIServToNo, service_unkown ( sapmsDEV) [nixxi.c      2580]
ERROR => MsIAttach: NiBufConnect to bw2003/sapmsDEV failed (rc=NIESERV_UNKNOWN) [msxxi.c      545]
Sat May 18 00:31:09 2030
***LOG Q0I=> NiPServToNo: getservbyname [ninti.c 428]
***LOG Q0A=> NiIServToNo, service_unkown ( sapmsDEV) [nixxi.c      2580]
ERROR => MsIAttach: NiBufConnect to bw2003/sapmsDEV failed (rc=NIESERV_UNKNOWN) [msxxi.c      545]
Sat May 18 00:31:29 2030
***LOG Q0I=> NiPServToNo: getservbyname [ninti.c 428]
***LOG Q0A=> NiIServToNo, service_unkown ( sapmsDEV) [nixxi.c      2580]
ERROR => MsIAttach: NiBufConnect to bw2003/sapmsDEV failed (rc=NIESERV_UNKNOWN) [msxxi.c      545]
Sat May 18 00:31:49 2030
***LOG Q0I=> NiPServToNo: getservbyname [ninti.c 428]
***LOG Q0A=> NiIServToNo, service_unkown ( sapmsDEV) [nixxi.c      2580]
ERROR => MsIAttach: NiBufConnect to bw2003/sapmsDEV failed (rc=NIESERV_UNKNOWN) [msxxi.c      545]
Sat May 18 00:32:09 2030
***LOG Q0I=> NiPServToNo: getservbyname [ninti.c 428]
***LOG Q0A=> NiIServToNo, service_unkown ( sapmsDEV) [nixxi.c      2580]
ERROR => MsIAttach: NiBufConnect to bw2003/sapmsDEV failed (rc=NIESERV_UNKNOWN) [msxxi.c      545]
ERROR => W3 (pid 2352) died [dpxxdisp.c   11523]
force unlock of wp_adm mutex W3
ERROR => W4 (pid 2360) died [dpxxdisp.c   11523]
force unlock of wp_adm mutex W4
ERROR => W9 (pid 2400) died [dpxxdisp.c   11523]
force unlock of wp_adm mutex W9
Sat May 18 00:32:29 2030
***LOG Q0I=> NiPServToNo: getservbyname [ninti.c 428]
***LOG Q0A=> NiIServToNo, service_unkown ( sapmsDEV) [nixxi.c      2580]
ERROR => MsIAttach: NiBufConnect to bw2003/sapmsDEV failed (rc=NIESERV_UNKNOWN) [msxxi.c      545]
Sat May 18 00:32:49 2030
***LOG Q0I=> NiPServToNo: getservbyname [ninti.c 428]
***LOG Q0A=> NiIServToNo, service_unkown ( sapmsDEV) [nixxi.c      2580]
ERROR => MsIAttach: NiBufConnect to bw2003/sapmsDEV failed (rc=NIESERV_UNKNOWN) [msxxi.c      545]
Sat May 18 00:32:51 2030
ERROR => MsISnd2: not_attached [msxxi.c      1139]
***LOG Q0N=> DpRqNoWpHandle, MsSndName () [dpxxdisp.c   3885]
ERROR => MsISnd2: not_attached [msxxi.c      1139]
***LOG Q0N=> DpRqNoWpHandle, MsSndAdmin () [dpxxdisp.c   3966]
Sat May 18 00:33:09 2030
***LOG Q0I=> NiPServToNo: getservbyname [ninti.c 428]
***LOG Q0A=> NiIServToNo, service_unkown ( sapmsDEV) [nixxi.c      2580]
ERROR => MsIAttach: NiBufConnect to bw2003/sapmsDEV failed (rc=NIESERV_UNKNOWN) [msxxi.c      545]
Sat May 18 00:33:11 2030
ERROR => MsISnd2: not_attached [msxxi.c      1139]
***LOG Q0N=> DpRqNoWpHandle, MsSndName () [dpxxdisp.c   3885]
Sat May 18 00:33:13 2030
ERROR => MsISnd2: not_attached [msxxi.c      1139]
***LOG Q0N=> DpRqNoWpHandle, MsSndName () [dpxxdisp.c   3885]
ERROR => MsISnd2: not_attached [msxxi.c      1139]
***LOG Q0N=> DpRqNoWpHandle, MsSndAdmin () [dpxxdisp.c   3966]
ERROR => MsISnd2: not_attached [msxxi.c      1139]
***LOG Q0N=> DpRqNoWpHandle, MsSndAdmin () [dpxxdisp.c   3966]
ERROR => MsISnd2: not_attached [msxxi.c      1139]
***LOG Q0N=> DpRqNoWpHandle, MsSndName () [dpxxdisp.c   3885]
Sat May 18 00:33:29 2030
***LOG Q0I=> NiPServToNo: getservbyname [ninti.c 428]
***LOG Q0A=> NiIServToNo, service_unkown ( sapmsDEV) [nixxi.c      2580]
ERROR => MsIAttach: NiBufConnect to bw2003/sapmsDEV failed (rc=NIESERV_UNKNOWN) [msxxi.c      545]
Sat May 18 00:33:49 2030
***LOG Q0I=> NiPServToNo: getservbyname [ninti.c 428]
***LOG Q0A=> NiIServToNo, service_unkown ( sapmsDEV) [nixxi.c      2580]
ERROR => MsIAttach: NiBufConnect to bw2003/sapmsDEV failed (rc=NIESERV_UNKNOWN) [msxxi.c      545]
Sat May 18 00:34:09 2030
***LOG Q0I=> NiPServToNo: getservbyname [ninti.c 428]
***LOG Q0A=> NiIServToNo, service_unkown ( sapmsDEV) [nixxi.c      2580]
ERROR => MsIAttach: NiBufConnect to bw2003/sapmsDEV failed (rc=NIESERV_UNKNOWN) [msxxi.c      545]
Sat May 18 00:34:29 2030
***LOG Q0I=> NiPServToNo: getservbyname [ninti.c 428]
***LOG Q0A=> NiIServToNo, service_unkown ( sapmsDEV) [nixxi.c      2580]
ERROR => MsIAttach: NiBufConnect to bw2003/sapmsDEV failed (rc=NIESERV_UNKNOWN) [msxxi.c      545]
Sat May 18 00:34:49 2030
***LOG Q0I=> NiPServToNo: getservbyname [ninti.c 428]
***LOG Q0A=> NiIServToNo, service_unkown ( sapmsDEV) [nixxi.c      2580]
ERROR => MsIAttach: NiBufConnect to bw2003/sapmsDEV failed (rc=NIESERV_UNKNOWN) [msxxi.c      545]
Sat May 18 00:35:09 2030
***LOG Q0I=> NiPServToNo: getservbyname [ninti.c 428]
***LOG Q0A=> NiIServToNo, service_unkown ( sapmsDEV) [nixxi.c      2580]
ERROR => MsIAttach: NiBufConnect to bw2003/sapmsDEV failed (rc=NIESERV_UNKNOWN) [msxxi.c      545]
Sat May 18 00:35:29 2030
***LOG Q0I=> NiPServToNo: getservbyname [ninti.c 428]
***LOG Q0A=> NiIServToNo, service_unkown ( sapmsDEV) [nixxi.c      2580]
ERROR => MsIAttach: NiBufConnect to bw2003/sapmsDEV failed (rc=NIESERV_UNKNOWN) [msxxi.c      545]
Sat May 18 00:35:49 2030
***LOG Q0I=> NiPServToNo: getservbyname [ninti.c 428]
***LOG Q0A=> NiIServToNo, service_unkown ( sapmsDEV) [nixxi.c      2580]
ERROR => MsIAttach: NiBufConnect to bw2003/sapmsDEV failed (rc=NIESERV_UNKNOWN) [msxxi.c      545]
Sat May 18 00:36:09 2030
***LOG Q0I=> NiPServToNo: getservbyname [ninti.c 428]
***LOG Q0A=> NiIServToNo, service_unkown ( sapmsDEV) [nixxi.c      2580]
ERROR => MsIAttach: NiBufConnect to bw2003/sapmsDEV failed (rc=NIESERV_UNKNOWN) [msxxi.c      545]
Sat May 18 00:36:29 2030
***LOG Q0I=> NiPServToNo: getservbyname [ninti.c 428]
***LOG Q0A=> NiIServToNo, service_unkown ( sapmsDEV) [nixxi.c      2580]
ERROR => MsIAttach: NiBufConnect to bw2003/sapmsDEV failed (rc=NIESERV_UNKNOWN) [msxxi.c      545]
Sat May 18 00:36:49 2030
***LOG Q0I=> NiPServToNo: getservbyname [ninti.c 428]
***LOG Q0A=> NiIServToNo, service_unkown ( sapmsDEV) [nixxi.c      2580]
ERROR => MsIAttach: NiBufConnect to bw2003/sapmsDEV failed (rc=NIESERV_UNKNOWN) [msxxi.c      545]
Sat May 18 00:37:09 2030
***LOG Q0I=> NiPServToNo: getservbyname [ninti.c 428]
***LOG Q0A=> NiIServToNo, service_unkown ( sapmsDEV) [nixxi.c      2580]
ERROR => MsIAttach: NiBufConnect to bw2003/sapmsDEV failed (rc=NIESERV_UNKNOWN) [msxxi.c      545]
Sat May 18 00:37:29 2030
***LOG Q0I=> NiPServToNo: getservbyname [ninti.c 428]
***LOG Q0A=> NiIServToNo, service_unkown ( sapmsDEV) [nixxi.c      2580]
ERROR => MsIAttach: NiBufConnect to bw2003/sapmsDEV failed (rc=NIESERV_UNKNOWN) [msxxi.c      545]
Sat May 18 00:37:33 2030
ERROR => MsISnd2: not_attached [msxxi.c      1139]
***LOG Q0N=> DpRqNoWpHandle, MsSndName () [dpxxdisp.c   3885]
ERROR => MsISnd2: not_attached [msxxi.c      1139]
***LOG Q0N=> DpRqNoWpHandle, MsSndAdmin () [dpxxdisp.c   3966]
ERROR => MsISnd2: not_attached [msxxi.c      1139]
***LOG Q0N=> DpRqNoWpHandle, MsSndName () [dpxxdisp.c   3885]
ERROR => MsISnd2: not_attached [msxxi.c      1139]
***LOG Q0N=> DpRqNoWpHandle, MsSndAdmin () [dpxxdisp.c   3966]
ERROR => MsISnd2: not_attached [msxxi.c      1139]
***LOG Q0N=> DpRqNoWpHandle, MsSndAdmin () [dpxxdisp.c   3966]
Sat May 18 00:37:49 2030
***LOG Q0I=> NiPServToNo: getservbyname [ninti.c 428]
***LOG Q0A=> NiIServToNo, service_unkown ( sapmsDEV) [nixxi.c      2580]
ERROR => MsIAttach: NiBufConnect to bw2003/sapmsDEV failed (rc=NIESERV_UNKNOWN) [msxxi.c      545]
Sat May 18 00:38:09 2030
***LOG Q0I=> NiPServToNo: getservbyname [ninti.c 428]
***LOG Q0A=> NiIServToNo, service_unkown ( sapmsDEV) [nixxi.c      2580]
ERROR => MsIAttach: NiBufConnect to bw2003/sapmsDEV failed (rc=NIESERV_UNKNOWN) [msxxi.c      545]
Sat May 18 00:38:29 2030
***LOG Q0I=> NiPServToNo: getservbyname [ninti.c 428]
***LOG Q0A=> NiIServToNo, service_unkown ( sapmsDEV) [nixxi.c      2580]
ERROR => MsIAttach: NiBufConnect to bw2003/sapmsDEV failed (rc=NIESERV_UNKNOWN) [msxxi.c      545]
Sat May 18 00:38:49 2030
***LOG Q0I=> NiPServToNo: getservbyname [ninti.c 428]
***LOG Q0A=> NiIServToNo, service_unkown ( sapmsDEV) [nixxi.c      2580]
ERROR => MsIAttach: NiBufConnect to bw2003/sapmsDEV failed (rc=NIESERV_UNKNOWN) [msxxi.c      545]
Sat May 18 00:39:09 2030
***LOG Q0I=> NiPServToNo: getservbyname [ninti.c 428]
***LOG Q0A=> NiIServToNo, service_unkown ( sapmsDEV) [nixxi.c      2580]
ERROR => MsIAttach: NiBufConnect to bw2003/sapmsDEV failed (rc=NIESERV_UNKNOWN) [msxxi.c      545]
Sat May 18 00:39:29 2030
***LOG Q0I=> NiPServToNo: getservbyname [ninti.c 428]
***LOG Q0A=> NiIServToNo, service_unkown ( sapmsDEV) [nixxi.c      2580]
ERROR => MsIAttach: NiBufConnect to bw2003/sapmsDEV failed (rc=NIESERV_UNKNOWN) [msxxi.c      545]
Sat May 18 00:39:49 2030
***LOG Q0I=> NiPServToNo: getservbyname [ninti.c 428]
***LOG Q0A=> NiIServToNo, service_unkown ( sapmsDEV) [nixxi.c      2580]
ERROR => MsIAttach: NiBufConnect to bw2003/sapmsDEV failed (rc=NIESERV_UNKNOWN) [msxxi.c      545]
Sat May 18 00:40:09 2030
***LOG Q0I=> NiPServToNo: getservbyname [ninti.c 428]
***LOG Q0A=> NiIServToNo, service_unkown ( sapmsDEV) [nixxi.c      2580]
ERROR => MsIAttach: NiBufConnect to bw2003/sapmsDEV failed (rc=NIESERV_UNKNOWN) [msxxi.c      545]
Sat May 18 00:40:29 2030
***LOG Q0I=> NiPServToNo: getservbyname [ninti.c 428]
***LOG Q0A=> NiIServToNo, service_unkown ( sapmsDEV) [nixxi.c      2580]
ERROR => MsIAttach: NiBufConnect to bw2003/sapmsDEV failed (rc=NIESERV_UNKNOWN) [msxxi.c      545]
Sat May 18 00:40:30 2030
caught signal 2
Sat May 18 00:40:42 2030
***LOG Q05=> DpHalt, DPStop ( 2276) [dpxxdisp.c   7883]
dev_w0
trc file: "dev_w0", trc level: 1, release: "620"
ACTIVE TRACE LEVEL           1
ACTIVE TRACE COMPONENTS      all, M
B
B Sat May 18 00:27:19 2030
B create_con (con_name=R/3)
B Loading DB library 'C:\usr\sap\DEV\SYS\exe\run\dboraslib.dll' ...
B Library 'C:\usr\sap\DEV\SYS\exe\run\dboraslib.dll' loaded
B Version of 'C:\usr\sap\DEV\SYS\exe\run\dboraslib.dll' is "620.02", patchlevel (0.549)
B New connection 0 created
M systemid   560 (PC with Windows NT)
M relno      6200
M patchlevel 0
M patchno    674
M intno      20020600
M pid        2328
M
M ***LOG Q0Q=> tskh_init, WPStart (Workproc 0 2328) [dpxxdisp.c   1028]
I MtxInit: -2 0 0
M
M Sat May 18 00:27:24 2030
M DpShMCreate: sizeof(wp_adm)          9776     (752)
M DpShMCreate: sizeof(tm_adm)          1690816     (8412)
M DpShMCreate: sizeof(wp_ca_adm)     18000     (60)
M DpShMCreate: sizeof(appc_ca_adm)     6000     (60)
M DpShMCreate: sizeof(comm_adm)     192000     (384)
M DpShMCreate: sizeof(wall_adm)     (22440/34344/56/100)
M DpShMCreate: SHM_DP_ADM_KEY          (addr: 04AF0040, size: 1974816)
M DpShMCreate: allocated sys_adm at 04AF0040
M DpShMCreate: allocated wp_adm at 04AF0560
M DpShMCreate: allocated tm_adm_list at 04AF2B90
M DpShMCreate: allocated tm_adm at 04AF2BB8
M DpShMCreate: allocated wp_ca_adm at 04C8F878
M DpShMCreate: allocated appc_ca_adm at 04C93EC8
M DpShMCreate: allocated comm_adm_list at 04C95638
M DpShMCreate: allocated comm_adm at 04C95650
M DpShMCreate: allocated ca_info at 04CC4450
M DpShMCreate: allocated wall_adm at 04CC4458
X
X Sat May 18 00:27:28 2030
X EmInit: MmSetImplementation( 2 ).
X <ES> client 0 initializing ....
X Using implementation std
M <EsNT> Memory Reset enabled as NT default
X ES initialized.
M
M Sat May 18 00:27:33 2030
M calling db_connect ...
C Got ORACLE_HOME=C:\oracle\ora92 from environment
C
C Sat May 18 00:28:05 2030
C Client NLS settings: AMERICAN_AMERICA.WE8DEC
C
C Sat May 18 00:28:06 2030
C Logon as OPS$-user to get SAPDEV's password
C Connecting as /@DEV on connection 0 ...
C Attaching to DB Server DEV (con_hdl=0,svchp=062414CC,svrhp=06243724)
C
C Sat May 18 00:28:17 2030
C Starting user session (con_hdl=0,svchp=062414CC,srvhp=06243724,usrhp=0624BEFC)
C
C Sat May 18 00:28:33 2030
C Now I'm connected to ORACLE
C Got SAPDEV's password from table SAPUSER
C Got SAPDEV's password from OPS$-user
C Disconnecting from connection 0 ...
C
C Sat May 18 00:28:34 2030
C Closing user session (con_hdl=0,svchp=062414CC,usrhp=0624BEFC)
C Now I'm disconnected from ORACLE
C Connecting as SAPDEV/<pwd>@DEV on connection 0 ...
C Starting user session (con_hdl=0,svchp=062414CC,srvhp=06243724,usrhp=0624BEFC)
C Now I'm connected to ORACLE
C Database NLS settings: AMERICAN_AMERICA.WE8DEC
C Database instance dev is running on BW2003 with ORACLE version 9.2.0.2.1 since 20300518
B
B Sat May 18 00:28:35 2030
B Connection 0 opened
B Wp Hdl ConName          ConId     ConState     TX PRM RCT Date     Time   DBHost
B 000 000 R/3              000000000 ACTIVE       NO YES NO 20300518 002733 BW2003
M
M Sat May 18 00:28:36 2030
M db_connect o.k.
I
I Sat May 18 00:29:01 2030
I MtxInit: 0 0 0
X
X Sat May 18 00:29:02 2030
X EmInit: MmSetImplementation( 2 ).
X <ES> client 0 initializing ....
X Using implementation std
X ES initialized.
B db_con_shm_ini: WP_ID = 0, WP_CNT = 13
B dbtbxbuf: Buffer TABL (addr: 0C2000C8, size: 30000000, end: 0DE9C448)
B dbtbxbuf: Buffer TABLP (addr: 0DEA00C8, size: 10240000, end: 0E8640C8)
B Layout of EIBUF buffer shared memory:
B 0: 1 * 4 = 4
B 1: 1 * 276 = 276
B 2: 13 * 20 = 260
B 3: 4001 * 40 = 160040
B 4: 2000 * 128 = 256000
B 5: 4001 * 4 = 16004
B 6: 1 * 100 = 100
B 7: 65 * 4 = 260
B 8: 29385 * 128 = 3761280
B Tracing = 0, Shm Protection = 0, Force checks = 0
I *** ERROR => [CreateOsShm] CreateFileMapping(54,4096 KB) failed with Err=1455
              ERROR_COMMITMENT_LIMIT: The paging file is too small for this operation to complete. [shmnt.c      2055]
I *** ERROR => ShmCreate: Create (54,4194384,1) failed [shmnt.c      469]
Memory diagnostic                                 *
Systeminformation
Processor-Typ             : Intel unknown
Processor-Count           : 1
Operating System          : NT 5.2, Build 3790
Service Pack              : Service Pack 1
NT Pagefile Informations
Config. minimum size      : 589824 K
Config. maximum size      : 1179648 K
Avail. maximum size      : 1179648 K
Num
Pagefile
Min.Size
Max.Size
Avail.Max
Curr.Size
1
C:\pagefile.sys
589824 K
1179648 K
1179648 K
1178900 K
NT Task Manager Informations
Total Handles             :        0
Total Threads             :        0
Total Processes           :        0
Commit Charge Total       : 1670224 K
Commit Charge Limit       : 1676596 K
Commit Charge Peak        : 1670376 K
Phys.Memory Total         :        0 K
Phys.Memory Available     :        0 K
File Cache                :        0 K
Kernel Memory Total       :        0 K
Kernel Memory Paged       :        0 K
Kernel Memory Nonpaged    :        0 K
Memory usage of current process
Total virt.address space : 2097024 K
Avail.virt.address space : 1133576 K
Private Pages             :        0 K
Total heap size           :    10729 K
Virtual memory regions    :        0 K
Uncommitted heap memory   :     4108 K
Allocated heap memory     :     4406 K
Moveable heap memory      :       24 K
DDE shared heap memory    :        0 K
Memory usage of all processes
PID
Image
Instance
Work.Set
WS Peak
Priv.Pages
PP Peak
Pg Fault
4
72 K
2100 K
0 K
0 K
3
352
smss.exe
212 K
448 K
144 K
160 K
0
424
winlogon.exe
996 K
9048 K
6188 K
6580 K
3
468
services.exe
1276 K
3136 K
1436 K
1564 K
0
480
lsass.exe
2148 K
6544 K
7048 K
7048 K
1
676
svchost.exe
552 K
2508 K
832 K
832 K
0
848
svchost.exe
4840 K
22520 K
13348 K
19208 K
9
972
spoolsv.exe
712 K
4060 K
3220 K
3228 K
1
1124
svchost.exe
392 K
1956 K
476 K
476 K
0
1176
agntsrvc.exe
948 K
7720 K
9128 K
9128 K
1
1196
TNSLSNR.exe
2432 K
5720 K
5764 K
5776 K
1
1212
cmd.exe
384 K
1572 K
1488 K
1488 K
0
1228
ORACLE.EXE
122564 K
135924 K
203080 K
205256 K
38
1324
SAPSTARTSRV.EXE
2520 K
13364 K
14828 K
14828 K
3
1420
VMwareService.exe
928 K
2164 K
604 K
604 K
0
1528
dbsnmp.exe
2240 K
11312 K
13608 K
39264 K
3
1816
Explorer.EXE
2928 K
15120 K
10200 K
10332 K
13
1864
jusched.exe
252 K
1764 K
432 K
432 K
0
1872
VMwareTray.exe
724 K
3144 K
852 K
888 K
0
1880
VMwareUser.exe
1376 K
3284 K
1032 K
1048 K
0
1996
svchost.exe
488 K
3740 K
1440 K
21664 K
1
216
svchost.exe
800 K
3708 K
2788 K
2788 K
0
2080
sapinst.exe
82868 K
105272 K
84324 K
105292 K
41
2088
javaw.exe
6944 K
21272 K
20396 K
20896 K
6
2200
startsap.exe
460 K
1772 K
748 K
748 K
0
2212
sapstart.exe
1244 K
3176 K
1188 K
1188 K
0
2276
disp+work.exe
[DP] DEV_00
26740 K
42464 K
30176 K
30176 K
10
2312
gwrd.EXE
[GW] DEV_00
1852 K
6116 K
3936 K
8208 K
1
2320
icman.EXE
56440 K
60192 K
75880 K
75880 K
17
2328
disp+work.EXE
[WP] DEV_00
10700 K
11516 K
43684 K
43788 K
7
2336
disp+work.EXE
[WP] DEV_00
6696 K
13084 K
42180 K
42180 K
6
2344
disp+work.EXE
[WP] DEV_00
10896 K
14092 K
42180 K
42180 K
6
2352
disp+work.EXE
[WP] DEV_00
10088 K
14588 K
42176 K
42176 K
6
2360
disp+work.EXE
[WP] DEV_00
9320 K
12960 K
42184 K
42184 K
6
2368
disp+work.EXE
[WP] DEV_00
9480 K
13076 K
42184 K
42184 K
6
2376
disp+work.EXE
[WP] DEV_00
10060 K
13220 K
42180 K
42180 K
6
2384
disp+work.EXE
[WP] DEV_00
10024 K
15128 K
42184 K
42184 K
6
2392
disp+work.EXE
[WP] DEV_00
6576 K
14752 K
42180 K
42180 K
6
2400
disp+work.EXE
[WP] DEV_00
8812 K
13436 K
42184 K
42184 K
6
2408
disp+work.EXE
[WP] DEV_00
8552 K
16140 K
42180 K
42180 K
6
2416
disp+work.EXE
25744 K
25972 K
41644 K
43788 K
10
2424
disp+work.EXE
[WP] DEV_00
6848 K
11060 K
42180 K
42180 K
6
Sum
460128 K
1063904 K
B dbexpbuf[0]: Shm 54: create failed
B ***LOG BBF=> internal error in export/import buffer: object buf init fail   [dbexpbuf#4 @ 2611] [dbexpbuf2611 ]
B dbexpbuf: return code (sap_rc): 4
B Buffer 0 will not be available
B Unexpected returncode from db_exp_init(EXP_ATP) : 4
B db_objinit failed
M *** ERROR => ThCallHooks: event handler db_init for event CREATE_SHM failed [thxxtool3.c 237]
M *** ERROR => ThIPCInit: hook failed [thxxhead.c   1656]
M ***LOG R19=> tskh_init, ThIPCInit ( TSKH-IPC-000001) [thxxhead.c   1159]
M in_ThErrHandle: 1
M *** ERROR => tskh_init: ThIPCInit (step 1, th_errno 17, action 3, level 1) [thxxhead.c   8437]
M
M Info for wp 0
M
M    stat = 4
M    reqtype = 1
M    act_reqtype = -1
M    tid = -1
M    mode = 255
M    len = -1
M    rq_id = -1
M    rq_source = 255
M    last_tid = 0
M    last_mode = 0
M    rfc_req = 0
M    report = >                                        <
M    action = 0
M    tab_name = >                              <
M
M *****************************************************************************
M *
M * LOCATION    SAP-Server bw2003_DEV_00 on host bw2003 (wp 0)
M * ERROR       tskh_init: ThIPCInit
M *
M * TIME        Sat May 18 00:29:02 2030
M * RELEASE     620
M * COMPONENT   Taskhandler
M * VERSION     1
M * RC          17
M * MODULE      thxxhead.c
M * LINE        8569
M * COUNTER     1
M *
M *****************************************************************************
M
M Entering TH_CALLHOOKS
M ThCallHooks: call hook >ThrSaveSPAFields< for event BEFORE_DUMP
M *** ERROR => ThrSaveSPAFields: no valid thr_wpadm [thxxrun1.c   672]
M *** ERROR => ThCallHooks: event handler ThrSaveSPAFields for event BEFORE_DUMP failed [thxxtool3.c 237]
M Entering ThSetStatError
M Entering ThReadDetachMode
M call ThrShutDown (1)...
M ***LOG Q02=> wp_halt, WPStop (Workproc 0 2328) [dpnttool.c   346]
M SemCleanup: Reset blocking on semaphore (Key:4/Slot:3)
Thanks buddy
waiting...

Yosemite compatibility with Mustek A3 Scanner

I was using the Image Acquire to import scans from my Mustek A3 1200 Pro usb series scanner when I was using Mountain Lion 10.8.
I recently decided I wanted to finally upgrade my OS to Yosemite 10.10. Now Image Acquire crashes when I try select my scanner.
Does anyone have any tips on how I can get scanning again? Mustek customer support says they'll release a Yosemite driver in about a month but I don't believe it. Mustek is bad about releasing drivers for Mac-- on their site they don't even have any for my scanner-- never did. All drivers I've ever found have been through other parties. So suggesting contacting the scanner company is off the table for me.
Is there another image acquire app or universal driver or some trick/ hack to get this scanner to work on this OS?

Vuex claims to have an all comers (types of scanners & computers) scanner printer, but surprise, NOT for the AE 2400S scanner, and they say they have no plans to do so. Hrumph.

Question about freeze and ATI Radeon HD 2400 XT

Hi,
I have an aluminum 20-inch iMac 7.1 OSX 2.0Ghz intel Core 2Duo, mid 2007 running SL 10.6.8.
Some months ago it started having a random freeze problem that happened sporadically and then increased to happen from around 20min in 20min.
-mouse moves but nothing happens and I have to shut it down on power button.
After extensive troubleshooting not working I took it to repair, they tested my hardware and said it was perfect so at the end I did a clean install,ran repair permissions and brought my documents from my back up without using time machine nor migration assistant and installed all my apps from scratch.
It got much better, and first I thought it was a problem with Little Snitch app so I uninstalled it.
Also I had noticed that while using latest versions of Firefox the graphic display would have a strange glitch, such as brief instances of pixel artifacts that can also appear on my display when out of the browser.
- I turned off hardware acceleration on the browser's preferences and it seemed to disappear.
Although this freeze is still happening, specially when I wake up the mac from sleep and yesterday I got a black screen.
I think I may have a problem related to my ATI Radeon HD 2400 XT and I would like to ask if anyone here has a similar problem or if anyone knows about a fix .
I tried to update the ATi from apple’s site but the update’s installer said I don’t need the update.

Hi
@dmaude and George, thank you both I am glad there are more people now coming forward with this problem.
George, I believe you are right, I came to that conclusion several months ago, it is a problem with the GPU and my ATI RadeonHD 2400 and something wrong with the driver, maybe a kernel extension.
And I came to that conclusion when I noticed that if I turned off Firefox "hardware accelaration" the browsers prefs would not freeze but it happens with,e.g. Photoshop, when I use tools that pull from the GPU.
I am going to read the link you left here.thanks
dmaude: I installed Techtools and Diskwarrior, and now ran it periodically after my radical clean install where I brought all my files manually without using time machine nor migration assistant and installed all my apps from scratch.
I am a web artist thus I am not even using much of my 250GB, I have 200GB free and 3GB memory.
No bad blocks, no problems with fans nor temperature, I download all updates, absolutely nothing.
It is a virtual freeze and I am almost sure it started with snow leopard 10.6.3 update.
What I did though that seems to alleviate the problem was to install this tiny program/app called "caffeine" that stops my imac from entering sleep and so I still get the freeze but it happens less times. I leave here the link, maybe it helps you because I got so tired of this problem that I did not even want to upgrade to Lion.
http://lightheadsw.com/caffeine/
I filed many bug reports to Apple, no response. I found a link from 2007 related to something similar and where Apple finally confirmed it was their bug, as stated there:
"Apple technical support has already confirmed the issue with several users, according to the threads, and the problem reportedly has been narrowed to the ATI Radeon HD cards inside the iMac."
Read more: http://www.macnn.com/articles/07/10/04/imac.freezing.redux/#ixzz1yQ8CLgsg
I can't say I trust Apple as I used to...

IMac early 2008 running slow after installation of Yosemite

I have been having problems with my iMac (early 2008). I ran a diagnosis check (Etresoft). I don't understand them so any help is welcome....
Problem description:
iMac early 20089 running slow since installation of Yosemite
EtreCheck version: 2.1.1 (104)
Report generated December 7, 2014 at 11:13:12 AM CST
Hardware Information: ℹ️
iMac (20-inch, Early 2008) (Verified)
iMac - model: iMac8,1
1 2.4 GHz Intel Core 2 Duo CPU: 2-core
3 GB RAM Upgradeable
BANK 0/DIMM0
1 GB DDR2 SDRAM 800 MHz ok
BANK 1/DIMM1
2 GB DDR2 SDRAM 800 MHz ok
Bluetooth: Old - Handoff/Airdrop2 not supported
Wireless: en1: 802.11 a/b/g/n
Video Information: ℹ️
ATI Radeon HD 2400 - VRAM: 128 MB
iMac 1680 x 1050
System Software: ℹ️
OS X 10.10.1 (14B25) - Uptime: 2 days 3:48:58
Disk Information: ℹ️
Hitachi HDP725025GLA380 disk0 : (250.06 GB)
S.M.A.R.T. Status: Verified
EFI (disk0s1) <not mounted> : 210 MB
Macintosh HD (disk0s2) / : 249.20 GB (162.83 GB free)
Recovery HD (disk0s3) <not mounted> [Recovery]: 650 MB
USB Information: ℹ️
Apple Inc. Built-in iSight
Apple, Inc. Keyboard Hub
Apple, Inc Apple Keyboard
Apple Computer, Inc. IR Receiver
Apple Inc. BRCM2046 Hub
Apple Inc. Bluetooth USB Host Controller
Gatekeeper: ℹ️
Mac App Store and identified developers
Startup Items: ℹ️
HP IO: Path: /Library/StartupItems/HP IO
Startup items are obsolete in OS X Yosemite
Problem System Launch Agents: ℹ️
[failed] com.apple.CallHistoryPluginHelper.plist
[failed] com.apple.CallHistorySyncHelper.plist
[failed] com.apple.cmfsyncagent.plist [Details]
[failed] com.apple.Maps.pushdaemon.plist
[failed] com.apple.printtool.agent.plist
[failed] com.apple.sbd.plist
[failed] com.apple.scopedbookmarkagent.xpc.plist
[failed] com.apple.telephonyutilities.callservicesd.plist
[failed] com.apple.warmd_agent.plist
Problem System Launch Daemons: ℹ️
[failed] com.apple.AssetCacheLocatorService.plist [Details]
[failed] com.apple.awdd.plist
[failed] com.apple.ctkd.plist
[failed] com.apple.hdiejectd.plist [Details]
[failed] com.apple.ifdreader.plist
[failed] com.apple.installd.plist [Details]
[failed] com.apple.nehelper.plist
[failed] com.apple.periodic-daily.plist [Details]
[failed] com.apple.softwareupdate_download_service.plist [Details]
[failed] com.apple.softwareupdated.plist [Details]
[failed] com.apple.wdhelper.plist
Launch Agents: ℹ️
[loaded] com.google.keystone.agent.plist [Support]
[loaded] com.hp.help.tocgenerator.plist [Support]
Launch Daemons: ℹ️
[loaded] com.adobe.fpsaud.plist [Support]
[loaded] com.google.keystone.daemon.plist [Support]
User Login Items: ℹ️
iTunesHelper UNKNOWNHidden (missing value)
Skype UNKNOWN (missing value)
Software Update Application (/System/Library/CoreServices/Software Update.app)
EvernoteHelper UNKNOWN (missing value)
Dropbox UNKNOWN (missing value)
Dropbox Application (/Applications/Dropbox.app)
Messages Application (/Applications/Messages.app)
HP Scheduler Application (/Library/Application Support/Hewlett-Packard/Software Update/HP Scheduler.app)
HPEventHandler UNKNOWN (missing value)
Internet Plug-ins: ℹ️
o1dbrowserplugin: Version: 5.38.6.0 - SDK 10.8 [Support]
Google Earth Web Plug-in: Version: 6.0 [Support]
Default Browser: Version: 600 - SDK 10.10
Flip4Mac WMV Plugin: Version: 3.2.0.16   - SDK 10.8 [Support]
OfficeLiveBrowserPlugin: Version: 12.3.6 [Support]
RealPlayer Plugin: Version: Unknown [Support]
Silverlight: Version: 5.1.10411.0 - SDK 10.6 [Support]
FlashPlayer-10.6: Version: 15.0.0.239 - SDK 10.6 [Support]
Flash Player: Version: 15.0.0.239 - SDK 10.6 [Support]
iPhotoPhotocast: Version: 7.0 - SDK 10.8
googletalkbrowserplugin: Version: 5.38.6.0 - SDK 10.8 [Support]
QuickTime Plugin: Version: 7.7.3
Photo Center Plugin: Version: Photo Center Plugin 1.1.2.2 [Support]
CouponPrinter-FireFox_v2: Version: Version 1.1.6 [Support]
JavaAppletPlugin: Version: 15.0.0 - SDK 10.10 Check version
User internet Plug-ins: ℹ️
Move_Media_Player: Version: npmnqmp 071706000001 [Support]
Google Earth Web Plug-in: Version: 7.1 [Support]
Safari Extensions: ℹ️
AdBlock
Translate
zoomintosafari
Shortly
Pin It Button
3rd Party Preference Panes: ℹ️
Flash Player [Support]
Flip4Mac WMV [Support]
Perian [Support]
Time Machine: ℹ️
Skip System Files: NO
Auto backup: YES
Volumes being backed up:
Macintosh HD: Disk size: 249.20 GB Disk used: 86.37 GB
Destinations:
Time Machine Backups [Local]
Total size: 499.76 GB
Total number of backups: 191
Oldest backup: 2008-11-28 18:33:25 +0000
Last backup: 2014-11-21 14:59:34 +0000
Size of backup disk: Adequate
Backup size 499.76 GB > (Disk used 86.37 GB X 3)
Top Processes by CPU: ℹ️
      2% WindowServer
      0% AppleSpell
      0% ps
      0% syslogd
      0% fontd
Top Processes by Memory: ℹ️
815 MB com.apple.SpeechRecognitionCore.speechrecognitiond
200 MB Safari
120 MB com.apple.WebKit.WebContent
45 MB mds_stores
32 MB Finder
Virtual Memory Information: ℹ️
32 MB Free RAM
1.22 GB Active RAM
1.21 GB Inactive RAM
422 MB Wired RAM
14.67 GB Page-ins
114 MB Page-outs
Diagnostics Information: ℹ️
Dec 5, 2014, 07:24:48 AM Self test - passed

Please describe the problem in as much relevant detail as possible. The "etrecheck" fad hasn't made that step any less necessary. The usual results of posting etrecheck output on this site without a full description of the problem are very poor. The better your description, the better the chance of a solution.
For example, if the computer is slow, which specific actions are slow? Is it slow all the time, or only sometimes? What other changes did you make, if any, just before it became slow? Have you seen any alerts or error messages? Have you done anything to try to fix it? Most importantly, do you have a current backup of all data? If the answer to the last question is "no," back up now. Ask if you need guidance. Do nothing else until you have a backup.

Mustek 2400 installation

Similar Messages

Maybe you are looking for