Mute all sound out of FCP

How do I mute all sound coming out of FCP. Not on an individual sequence or clip. All the time. Is there an 'Mute All' button or option anywhere?
Thanks

Back in the day...
I had a mini headphone jack adapter that wasn't hooked to any headphones. I'd just pop that in the audio jack on the front of my computer and leave it there. That was back when you couldn't turn the startup sound off.
Maybe that would work for you too. You know... those iPod ear buds only seem to work for so long before they crud out... I've got a mess of them that I never use anymore... I'd just cut the end off one of those... hmmm... sounds like an eBay sale for sure!!!
CaptM

Similar Messages

  • How do i mute all sounds except alarm

    I want to mute all sounds and alerts except for my alarm so I don't get bothered by sounds all night long. How do I do that?

    To switch between ring and silent mode: Flip the Ring/Silent switch on the side of iPhone. When set to silent, iPhone doesn’t play any ring, alert, or effects sounds. It does,however, play alarms set using Clock.

  • Need all sound out of both speaker, no stereo

    How do i get all the tracks of the audio to come out of BOTH speakers. I want all sounds to come out of both speakers exactly the same. Ideas?

    You have recorded your tracks in stereo. Switch them to mono.
    To record stereo tracks you would need two input sources (two mic's left and right). If you record from one guitar or one mic that will be mono.

  • How to easily mute all sounds but still use phone?

    For the life of me, why doesn't the volume control on the side of the iPhone go down all the way to mute like the iPad does.  There is no one convenient place to go to turn off sounds while in a meeting but yet still use the phone without turning it off.  Turning it off is not an option for a lot of people. 

    To take advantage of the All Features in iOS 5 See Here
    http://manuals.info.apple.com/en_US/iphone_user_guide.pdf

  • How to mute incomming sound from all callers when ...

    We sometimes transmit a meeting for worship to sick ones who dial in to listen. If they don't remember (or don't know how to) mute their microphones we get feedback through the PA because the laptop headphone socket is fed into the PA to play music.
    Is there a button I've not yet seen in Skype that will "Mute all incomming sound from callers"?

    I've never tried this but I think its what you are after.
    On the skype menu, go to Tools and then Options
    Select Sounds
    The is an option to Mute all sounds - this should stop any incoming sound including erroneous cam and mic audio from all callers and I think will allow your outgoing sound to transmit ok.

  • Global volume control for all sounds in a swf

    Does anyone know of a way to adjust the volume of all the sounds in a swf?  I'm looking to build a volume controller that changes the audio level of the swf.
    Thanks!

    I used:
    SoundMixer.soundTransform = new SoundTransform(0);
    and that mutes all sounds in my swf.

  • HT1533 my sound has stopped working i have speakers plugged in but computer doesnt register or recognize them. the volume is on mute and grayed out ...will not let me change,what can i do to fix this problem....i have tried unplugging and plugging back in

    my sound has stopped working i have speakers plugged in but computer doesnt register or recognize them. the volume is on mute and grayed out ...will not let me change,what can i do to fix this problem....i have tried unplugging and plugging back in and reset and headphones...nothing works..how do i get my sound back?

    OS X Mountain Lion: If you can’t hear sound from your speakers
    Read the "If you’re trying to listen through external speakers" section.

  • Just got fcp, how do mute the sound on the video clip so it does not come through the audio track?

    just got fcp, how do mute the sound on the video clip so it does not come through the audio track?
    Please help

    Don't edit the audio into the timeline. Or pull the audio level down to zero in the inspector or on the audio waveform in the timeline.

  • I am unable to get any sound out of my internal speakers and no options to use them are available. Plus the mute box is ticked and greyed out and will not untick

    How can I get sound from my internal speakers. I have not set or adjusted any sound levels but all sound is muted and am unable to untick the mute box.  I had sound when I bought the machine but now nothing, not even an option to select internal soeakers in Souns setup!!

    1. Reset PRAM.  http://support.apple.com/kb/PH4405
    2. Reset SMC.     http://support.apple.com/kb/HT3964
        Choose the method for:
        "Resetting SMC on portables with a battery you should not remove on your own".
    3. Applications > Utilities > Audio MIDI Setup
        Audio Devices window
        Side Bar
        Click the Built-in Output.
        Under Mute any of the boxes checked? If so, uncheck it.

  • USB Microphone cuts out all sound

    I'm using Logic Express 8, with an MXL condenser microphone.  At first everything worked fine.  I could hear all the audio.
    But now, when I plug in the microphone, it cuts off all sound.  The computer is receiving an audio signal.  Under preferences, USB Audio Codec is chosen.
    I created an aggregate devise, but that didn't work.  I chose the new aggregate devise in audio preferences.  No luck.
    Does anyone have a solution?
    Thanks,
    Michael

    I do not have your exact computer model or sound driver, but I can tell you what I did that fixed my microphone issues almost instantly for my G780!
    My microphone also cut out during voip calls (such as Skype, G+ hangouts, etc) but my audio when using any type of recording software was fine!
    So apparently for my laptop, there was a bit of additional software that was installed called Smart Audio which is also by Coaxant. 
    If you have this program, this is probably what is causing all the sporadic quality changes. 
    What I did:
    -Open Smart Audio (it's not actually an installed program, it is a setting so I just searched for it in the start menu)
    -Go over to the VOIP tab on the bottom, and click on Voice Over IP to DISABLE the features. 
    -The icon for the setting should now be disabled, along with microphone noise reduction and acoustic echo cancellation. 
    These settings in smart audio were the ones making my microphone sound so horrible. As soon as I disabled it, people on the other side of the chat immediately noticed a dramatic increase in overall quality!
    Hope this helps!
    -Clark 

  • Sound not working all greyed out

    Hi, recently the sound stopped working on the family Imac. when using volume toggles the speaker icon is all greyed out and there is a kindof cancel icom below the volume level bar. also there are no devices listed in the sound output tab. tried reloading mountain lion, to no avail and ive read some discusions on the apple forums. also check the headphone jack and there is NO red light.

    One way to test is to Safe Boot from the HD, (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions, Test for problem in Safe Mode...
    PS. Safe boot may stay on the gray radian for a long time, let it go, it's trying to repair the Hard Drive
    Reboot, test again.
    If it only does it in Regular Boot, then it could be some hardware problem like Video card, (Quartz is turned off in Safe Mode), or Airport, or some USB or Firewire device, or 3rd party add-on, Check System Preferences>Accounts>Login Items window to see if it or something relevant is listed.
    Check the System Preferences>Other Row, for 3rd party Pref Panes.
    Also look in these if they exist, some are invisible...
    /private/var/run/StartupItems
    /Library/StartupItems
    /System/Library/StartupItems
    /System/Library/LaunchDaemons
    /Library/LaunchDaemons

  • I have a brand new Nano Ipod 7th Generation.  I can't get any sound out of earphones.  Yes, have pushed the cord all the way in.  Screen shows tunes are playing, but I can't hear anything.  Volume bar shows volume all the way up.  Now what?

    No sound out of earphones.  Yes, cord is all the way in the jack.  Screen shows tune is "playing", but I can't get any sound out.  Help

    If this is the case, I recommend to visit Apple store to request for replacement. Cheers!

  • Unbalanced sound with 2 speakers - almost all coming out the left spea

    My Audigy SE card with 2 speakers (one Altec Lansing with the amp in and the other a decent 6 ohm Infiniti) puts nearly all the sound out of the left speaker (the Infiniti). I couldn't find a balance control in the Creative mixer and had to go back to control panel sound to crank the balance wildly to the right. I realise the speakers aren't matched but they worked just fine until I re-installed Windows and all my Creative software last week.
    I haven't tried recording yet but I hope that will be in balance.
    CRIKEY! While I was typing, the right speaker suddenly cranked itself up. Bit odd. Just in case this is a Creative problem, I will post it anyway.

    Did you ever fix this problem? I have the exact same thing happening to my sound.
    All the sound comes from the left in stereo sound. I plugged the green stereo analog speakers into the other pin the blackone for 4. setting on my SBLi've24 allthe others play fron t left back left and back right but the front right is so soft like a whisper.
    So the speakers work. Im running a Xp mediaedition system. It happened after an apparent sound conflict that made an electronic popping sound which got progressi'vely worse until i figured out how to reset the car d in the Bios level. I have done evrything but reformat the hard dri've All tests say the hardware is working but still no front right channel. Help please

  • My iphone 5 has no sound out the speakers, all it will do is play out alarm tone, all sound were Working this morning, I have re set my phone many times

    My iphone 5 has no sound out the speakers, all it will do is play out alarm tone, all sound were Working this morning, I have re set my phone many times, please help

    Hey Amiee_19,
    Thanks for the question. It sounds like your Ring/Silent switch may be toggled:
    Ring/Silent switch - iPhone
    http://help.apple.com/iphone/7/#/iph3bd01398
    Ring/Silent switch
    Flip the Ring/Silent switch to put iPhone in ring mode or silent mode .
    In ring mode, iPhone plays all sounds. In silent mode, iPhone doesn’t ring or play alerts and other sound effects.
    Important: Clock alarms, audio apps such as Music, and many games play sounds through the built-in speaker, even when iPhone is in silent mode. In some areas, the sound effects for Camera and Voice Memos are played, even if the Ring/Silent switch is set to silent.
    For information about changing sound and vibration settings, see Sounds and silence.
    Use Do Not Disturb. You can also silence calls, alerts, and notifications using Do Not Disturb. Swipe up from the bottom edge of the screen to open Control Center, then tap the Do Not Disturb button . See Do Not Disturb.
    If the above does not resolve your issue, see this article:
    iPhone: No sound or distorted sound from speaker
    http://support.apple.com/kb/TS5180
    Thanks,
    Matt M.

  • Lost all sounds on Imac can not deselect mute all computer sounds

    I can not deselect mute all computer sounds on my Imac with Lion I went into preference and for output the only thing I can select is headphones is there away to get the built in speakers back on this drop down list?

    Hello, long shot, but...
    Open Audio Midi Setup in Applications>Utilities, see the input & output options & KHz setting there, some things will change it for their own use, then not set it back

Maybe you are looking for