Mute key fails during startup

What is wrong with the Macbook mute key? I'm tired of waking up the rest of my house late at night or during classes or in the library. My Powerbook Pismo never embarassed me this way.
What is needed to get the key to function at startup as it should? What is Apple doing to fix this? If I revert to Panther would the mute key work?

I haven't seen this in any of the MacBook documentation or in Apple's FAQs for the MacBook. As such... I'm not sure how you can call it a "failure" or ask "What Apple is doing to fix this?". From what I can tell, there isn't anything to indicate that the MacBook should do this to start with. The new MacBooks and Pros are complete redesigns. If they've chosen to not include that feature, that doesn't indicate a problem. Perhaps in a future firmware update, they may decide to include it. I just don't want people to think there is something wrong with their MacBook when there isn't.

Similar Messages

  • What shall i do my iphone showing activation failed during startup?

    what shall i do my iphone showing activation failed during startup?

    Hi funkeyankey,
    It sounds like your phone is not activating correctly when you are trying to set it up. I would recommend the troubleshooting from the following article named:
    Get help activating your iPhone
    http://support.apple.com/kb/ts3424
    Check the system status for iOS Device Activation. If the iOS Device Activation status isn't green, try activating your iPhone later.
    Restart the iPhone.
    Try to reach the activation server another way, then try to activate.
    Try connecting to a known-good Wi-Fi network if you can't activate using a cellular data connection.
    Try connecting to iTunes if you can't activate using Wi-Fi.
    Restore the iPhone.
    If you receive an alert message when you try to activate your iPhone, place the iPhone in recovery mode and perform a restore. If you still can't complete the setup assistant due to an activation error, contact Apple for assistance.
    If you're asked to enter a password to proceed with activating the iPhone, Activation Lock might be enabled as part of Find my iPhone.
    Thank you for using Apple Support Communities.
    All the very best,
    Sterling

  • Where can I find a list of what different keys do during startup?

    After recently installing Lion on my MacBook Pro I found many of my apps wouldn't work. I called Apple and they helped me to uninstall Lion. They had me hold down C + R during startup and another time "Option" key. Fairly new to Mac but would like to know my different options. Is there a list somewhere that explains what holding different keys during startup will do?

    http://support.apple.com/kb/ht1343

  • UCM Server libraries and application failed during startup

    When i am going to start UCM_Server managed server (a instance of UCM) from Administrative Console, server started but application startup failed. Similarly, when i start this server using startManagedWebLogic startup script, server as well as applications started without any error. When i see log, I found following errors:-
    <Apr 7, 2011 4:37:29 PM GMT+05:00> <Critical> <WebLogicServer> <BEA-000286> <Failed to invoke startup class "JRF Startup Class", java.lang.ClassNotFoundException: oracle.jrf.wls.JRFStartup
    java.lang.ClassNotFoundException: oracle.jrf.wls.JRFStartup
         at java.net.URLClassLoader$1.run(URLClassLoader.java:202)
         at java.net.URLClassLoader.findClass(URLClassLoader.java:190)
         at java.lang.ClassLoader.loadClass(ClassLoader.java:307)
         at sun.misc.Launcher$AppClassLoader.loadClass(Launcher.java:308)
         at java.lang.ClassLoader.loadClass(ClassLoader.java:248)
         Truncated. see log file for complete stacktrace
    >
    <Apr 7, 2011 4:37:29 PM GMT+05:00> <Critical> <WebLogicServer> <BEA-000286> <Failed to invoke startup class "JPS Startup Class", java.lang.ClassNotFoundException: oracle.security.jps.wls.JpsWlsStartupClass
    java.lang.ClassNotFoundException: oracle.security.jps.wls.JpsWlsStartupClass
         at java.net.URLClassLoader$1.run(URLClassLoader.java:202)
         at java.net.URLClassLoader.findClass(URLClassLoader.java:190)
         at java.lang.ClassLoader.loadClass(ClassLoader.java:307)
         at sun.misc.Launcher$AppClassLoader.loadClass(Launcher.java:308)
         at java.lang.ClassLoader.loadClass(ClassLoader.java:248)
         Truncated. see log file for complete stacktrace
    >
    <Apr 7, 2011 4:37:29 PM GMT+05:00> <Critical> <WebLogicServer> <BEA-000286> <Failed to invoke startup class "ODL-Startup", java.lang.ClassNotFoundException: oracle.core.ojdl.weblogic.ODLConfiguration
    java.lang.ClassNotFoundException: oracle.core.ojdl.weblogic.ODLConfiguration
         at java.net.URLClassLoader$1.run(URLClassLoader.java:202)
         at java.net.URLClassLoader.findClass(URLClassLoader.java:190)
         at java.lang.ClassLoader.loadClass(ClassLoader.java:307)
         at sun.misc.Launcher$AppClassLoader.loadClass(Launcher.java:308)
         at java.lang.ClassLoader.loadClass(ClassLoader.java:248)
         Truncated. see log file for complete stacktrace
    >
    <Apr 7, 2011 4:37:29 PM GMT+05:00> <Critical> <WebLogicServer> <BEA-000286> <Failed to invoke startup class "AWT Application Context Startup Class", java.lang.ClassNotFoundException: oracle.jrf.AppContextStartup
    java.lang.ClassNotFoundException: oracle.jrf.AppContextStartup
         at java.net.URLClassLoader$1.run(URLClassLoader.java:202)
         at java.net.URLClassLoader.findClass(URLClassLoader.java:190)
         at java.lang.ClassLoader.loadClass(ClassLoader.java:307)
         at sun.misc.Launcher$AppClassLoader.loadClass(Launcher.java:308)
         at java.lang.ClassLoader.loadClass(ClassLoader.java:248)
         Truncated. see log file for complete stacktrace
    >
    <Apr 7, 2011 4:37:29 PM GMT+05:00> <Critical> <WebLogicServer> <BEA-000286> <Failed to invoke startup class "JMX Framework Startup Class", java.lang.ClassNotFoundException: oracle.as.jmx.framework.wls.spi.StartupListener
    java.lang.ClassNotFoundException: oracle.as.jmx.framework.wls.spi.StartupListener
         at java.net.URLClassLoader$1.run(URLClassLoader.java:202)
         at java.net.URLClassLoader.findClass(URLClassLoader.java:190)
         at java.lang.ClassLoader.loadClass(ClassLoader.java:307)
         at sun.misc.Launcher$AppClassLoader.loadClass(Launcher.java:308)
         at java.lang.ClassLoader.loadClass(ClassLoader.java:248)
         Truncated. see log file for complete stacktrace
    >
    <Apr 7, 2011 4:37:29 PM GMT+05:00> <Critical> <WebLogicServer> <BEA-000286> <Failed to invoke startup class "Web Services Startup Class", java.lang.ClassNotFoundException: oracle.j2ee.ws.server.WebServiceServerStartup
    java.lang.ClassNotFoundException: oracle.j2ee.ws.server.WebServiceServerStartup
         at java.net.URLClassLoader$1.run(URLClassLoader.java:202)
         at java.net.URLClassLoader.findClass(URLClassLoader.java:190)
         at java.lang.ClassLoader.loadClass(ClassLoader.java:307)
         at sun.misc.Launcher$AppClassLoader.loadClass(Launcher.java:308)
         at java.lang.ClassLoader.loadClass(ClassLoader.java:248)
         Truncated. see log file for complete stacktrace
    >
    <Apr 7, 2011 4:37:29 PM GMT+05:00> <Critical> <WebLogicServer> <BEA-000286> <Failed to invoke startup class "JOC-Startup", java.lang.ClassNotFoundException: oracle.ias.cache.Startup
    java.lang.ClassNotFoundException: oracle.ias.cache.Startup
         at java.net.URLClassLoader$1.run(URLClassLoader.java:202)
         at java.net.URLClassLoader.findClass(URLClassLoader.java:190)
         at java.lang.ClassLoader.loadClass(ClassLoader.java:307)
         at sun.misc.Launcher$AppClassLoader.loadClass(Launcher.java:308)
         at java.lang.ClassLoader.loadClass(ClassLoader.java:248)
         Truncated. see log file for complete stacktrace
    >
    <Apr 7, 2011 4:37:29 PM GMT+05:00> <Critical> <WebLogicServer> <BEA-000286> <Failed to invoke startup class "DMS-Startup", java.lang.ClassNotFoundException: oracle.dms.wls.DMSStartup
    java.lang.ClassNotFoundException: oracle.dms.wls.DMSStartup
         at java.net.URLClassLoader$1.run(URLClassLoader.java:202)
         at java.net.URLClassLoader.findClass(URLClassLoader.java:190)
         at java.lang.ClassLoader.loadClass(ClassLoader.java:307)
         at sun.misc.Launcher$AppClassLoader.loadClass(Launcher.java:308)
         at java.lang.ClassLoader.loadClass(ClassLoader.java:248)
         Truncated. see log file for complete stacktrace
    >
    <Apr 7, 2011 4:37:37 PM GMT+05:00> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to STANDBY>
    <Apr 7, 2011 4:37:37 PM GMT+05:00> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to STARTING>
    <Apr 7, 2011 4:38:07 PM GMT+05:00> <Error> <Deployer> <BEA-149205> <Failed to initialize the application 'DMS Application [Version=11.1.1.1.0]' due to error java.lang.NoClassDefFoundError: oracle/dms/http/Request.
    java.lang.NoClassDefFoundError: oracle/dms/http/Request
         at java.lang.Class.getDeclaredFields0(Native Method)
         at java.lang.Class.privateGetDeclaredFields(Class.java:2291)
         at java.lang.Class.getDeclaredFields(Class.java:1743)
         at weblogic.j2ee.dd.xml.BaseJ2eeAnnotationProcessor.getFields(BaseJ2eeAnnotationProcessor.java:1024)
         at weblogic.j2ee.dd.xml.BaseJ2eeAnnotationProcessor.getFields(BaseJ2eeAnnotationProcessor.java:1017)
         Truncated. see log file for complete stacktrace
    Caused By: java.lang.NoClassDefFoundError: oracle/dms/http/Request
         at java.lang.Class.getDeclaredFields0(Native Method)
         at java.lang.Class.privateGetDeclaredFields(Class.java:2291)
         at java.lang.Class.getDeclaredFields(Class.java:1743)
         at weblogic.j2ee.dd.xml.BaseJ2eeAnnotationProcessor.getFields(BaseJ2eeAnnotationProcessor.java:1024)
         at weblogic.j2ee.dd.xml.BaseJ2eeAnnotationProcessor.getFields(BaseJ2eeAnnotationProcessor.java:1017)
         Truncated. see log file for complete stacktrace
    >
    When processing WebService module 'wsil.war'. Failed to load servlet Class: oracle.j2ee.ws.server.wsil.WSILServlet
    Ignoring: unable to load class:java.lang.ClassNotFoundException: oracle.j2ee.ws.server.wsil.WSILServlet at: weblogic.xml.schema.binding.util.ClassUtil.loadClass(ClassUtil.java:76)
    When processing WebService module 'wsil.war'. Failed to load servlet Class: oracle.j2ee.ws.server.wsil.WSILServlet
    Ignoring: unable to load class:java.lang.ClassNotFoundException: oracle.j2ee.ws.server.wsil.WSILServlet at: weblogic.xml.schema.binding.util.ClassUtil.loadClass(ClassUtil.java:76)
    <Apr 7, 2011 4:38:12 PM GMT+05:00> <Error> <HTTP> <BEA-101371> <There was a failure when processing annotations for application D:\oracle\Middleware\Oracle_ECM1\ucm\idc\components\ServletPlugin\idcnativews.war. Please make sure that the annotations are valid. The error is oracle.dms.wls.DMSServletFilter>
    <Apr 7, 2011 4:38:12 PM GMT+05:00> <Error> <Deployer> <BEA-149205> <Failed to initialize the application 'Oracle UCM Native Web Services' due to error weblogic.application.ModuleException: Failed to load webapp: 'idcnativews.war'.
    weblogic.application.ModuleException: Failed to load webapp: 'idcnativews.war'
         at weblogic.servlet.internal.WebAppModule.prepare(WebAppModule.java:393)
         at weblogic.application.internal.flow.ScopedModuleDriver.prepare(ScopedModuleDriver.java:180)
         at weblogic.application.internal.flow.ModuleListenerInvoker.prepare(ModuleListenerInvoker.java:199)
         at weblogic.application.internal.flow.DeploymentCallbackFlow$1.next(DeploymentCallbackFlow.java:518)
         at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:52)
         Truncated. see log file for complete stacktrace
    Caused By: java.lang.ClassNotFoundException: oracle.dms.wls.DMSServletFilter
         at weblogic.utils.classloaders.GenericClassLoader.findLocalClass(GenericClassLoader.java:297)
         at weblogic.utils.classloaders.GenericClassLoader.findClass(GenericClassLoader.java:270)
         at weblogic.utils.classloaders.ChangeAwareClassLoader.findClass(ChangeAwareClassLoader.java:64)
         at java.lang.ClassLoader.loadClass(ClassLoader.java:307)
         at java.lang.ClassLoader.loadClass(ClassLoader.java:248)
         Truncated. see log file for complete stacktrace
    >
    <Apr 7, 2011 4:38:12 PM GMT+05:00> <Error> <HTTP> <BEA-101371> <There was a failure when processing annotations for application D:\oracle\Middleware\Oracle_ECM1\ucm\idc\components\ServletPlugin\idcws.war. Please make sure that the annotations are valid. The error is oracle.dms.wls.DMSServletFilter>
    <Apr 7, 2011 4:38:12 PM GMT+05:00> <Error> <Deployer> <BEA-149205> <Failed to initialize the application 'Oracle UCM Web Services' due to error weblogic.application.ModuleException: Failed to load webapp: 'idcws.war'.
    weblogic.application.ModuleException: Failed to load webapp: 'idcws.war'
         at weblogic.servlet.internal.WebAppModule.prepare(WebAppModule.java:393)
         at weblogic.application.internal.flow.ScopedModuleDriver.prepare(ScopedModuleDriver.java:180)
         at weblogic.application.internal.flow.ModuleListenerInvoker.prepare(ModuleListenerInvoker.java:199)
         at weblogic.application.internal.flow.DeploymentCallbackFlow$1.next(DeploymentCallbackFlow.java:518)
         at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:52)
         Truncated. see log file for complete stacktrace
    Caused By: java.lang.ClassNotFoundException: oracle.dms.wls.DMSServletFilter
         at weblogic.utils.classloaders.GenericClassLoader.findLocalClass(GenericClassLoader.java:297)
         at weblogic.utils.classloaders.GenericClassLoader.findClass(GenericClassLoader.java:270)
         at weblogic.utils.classloaders.ChangeAwareClassLoader.findClass(ChangeAwareClassLoader.java:64)
         at java.lang.ClassLoader.loadClass(ClassLoader.java:307)
         at java.lang.ClassLoader.loadClass(ClassLoader.java:248)
         Truncated. see log file for complete stacktrace
    >
    <Apr 7, 2011 4:38:13 PM GMT+05:00> <Warning> <J2EE> <BEA-160140> <Unresolved optional package references (in META-INF/MANIFEST.MF): [Extension-Name: AttachmentsAuthorization, Specification-Version: 1, Implementation-Version: 11.1, referenced from: D:\oracle\Middleware\user_projects\domains\ucm_domain\servers\UCM_server\tmp\_WL_user\Oracle Universal Content Management - Content Server\tqwlmw]. Make sure the referenced optional package has been deployed as a library.>
    <Apr 7, 2011 4:38:13 PM GMT+05:00> <Error> <Deployer> <BEA-149205> <Failed to initialize the application 'Oracle Universal Content Management - Content Server' due to error weblogic.management.DeploymentException: .
    weblogic.management.DeploymentException:
         at weblogic.application.internal.flow.BaseLifecycleFlow$CreateListenerAction.run(BaseLifecycleFlow.java:176)
         at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
         at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:120)
         at weblogic.application.internal.flow.BaseLifecycleFlow$BaseAction.invoke(BaseLifecycleFlow.java:104)
         at weblogic.application.internal.flow.HeadLifecycleFlow.createListener(HeadLifecycleFlow.java:117)
         Truncated. see log file for complete stacktrace
    Caused By: java.lang.ClassNotFoundException: oracle.security.jps.wls.listeners.JpsApplicationLifecycleListener
         at weblogic.utils.classloaders.GenericClassLoader.findLocalClass(GenericClassLoader.java:297)
         at weblogic.utils.classloaders.GenericClassLoader.findClass(GenericClassLoader.java:270)
         at java.lang.ClassLoader.loadClass(ClassLoader.java:307)
         at java.lang.ClassLoader.loadClass(ClassLoader.java:248)
         at weblogic.utils.classloaders.GenericClassLoader.loadClass(GenericClassLoader.java:179)
         Truncated. see log file for complete stacktrace
    >
    <Apr 7, 2011 4:38:13 PM GMT+05:00> <Error> <HTTP> <BEA-101165> <Could not load user defined filter in web.xml: ServletContext@35146290[app:wsil-wls module:/inspection.wsil path:/inspection.wsil spec-version:2.5] oracle.dms.wls.DMSServletFilter.
    java.lang.ClassNotFoundException: oracle.dms.wls.DMSServletFilter
         at weblogic.utils.classloaders.GenericClassLoader.findLocalClass(GenericClassLoader.java:297)
         at weblogic.utils.classloaders.GenericClassLoader.findClass(GenericClassLoader.java:270)
         at weblogic.utils.classloaders.ChangeAwareClassLoader.findClass(ChangeAwareClassLoader.java:64)
         at java.lang.ClassLoader.loadClass(ClassLoader.java:307)
         at java.lang.ClassLoader.loadClass(ClassLoader.java:248)
         Truncated. see log file for complete stacktrace
    >
    <Apr 7, 2011 4:38:13 PM GMT+05:00> <Error> <Deployer> <BEA-149231> <Unable to set the activation state to true for the application 'wsil-wls'.
    weblogic.application.ModuleException:
         at weblogic.servlet.internal.WebAppModule.startContexts(WebAppModule.java:1510)
         at weblogic.servlet.internal.WebAppModule.start(WebAppModule.java:482)
         at weblogic.application.internal.flow.ModuleStateDriver$3.next(ModuleStateDriver.java:425)
         at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:52)
         at weblogic.application.internal.flow.ModuleStateDriver.start(ModuleStateDriver.java:119)
         Truncated. see log file for complete stacktrace
    Caused By: java.lang.ClassNotFoundException: oracle.dms.wls.DMSServletFilter
         at weblogic.utils.classloaders.GenericClassLoader.findLocalClass(GenericClassLoader.java:297)
         at weblogic.utils.classloaders.GenericClassLoader.findClass(GenericClassLoader.java:270)
         at weblogic.utils.classloaders.ChangeAwareClassLoader.findClass(ChangeAwareClassLoader.java:64)
         at java.lang.ClassLoader.loadClass(ClassLoader.java:307)
         at java.lang.ClassLoader.loadClass(ClassLoader.java:248)
         Truncated. see log file for complete stacktrace
    >
    <Apr 7, 2011 4:38:13 PM GMT+05:00> <Error> <HTTP> <BEA-101165> <Could not load user defined filter in web.xml: ServletContext@35701572[app:Oracle UCM Help module:ocsh path:/_ocsh spec-version:2.5] oracle.dms.wls.DMSServletFilter.
    java.lang.ClassNotFoundException: oracle.dms.wls.DMSServletFilter
         at weblogic.utils.classloaders.GenericClassLoader.findLocalClass(GenericClassLoader.java:297)
         at weblogic.utils.classloaders.GenericClassLoader.findClass(GenericClassLoader.java:270)
         at weblogic.utils.classloaders.ChangeAwareClassLoader.findClass(ChangeAwareClassLoader.java:64)
         at java.lang.ClassLoader.loadClass(ClassLoader.java:307)
         at java.lang.ClassLoader.loadClass(ClassLoader.java:248)
         Truncated. see log file for complete stacktrace
    >
    <Apr 7, 2011 4:38:13 PM GMT+05:00> <Error> <Deployer> <BEA-149231> <Unable to set the activation state to true for the application 'Oracle UCM Help'.
    weblogic.application.ModuleException:
         at weblogic.servlet.internal.WebAppModule.startContexts(WebAppModule.java:1510)
         at weblogic.servlet.internal.WebAppModule.start(WebAppModule.java:482)
         at weblogic.application.internal.flow.ModuleStateDriver$3.next(ModuleStateDriver.java:425)
         at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:52)
         at weblogic.application.internal.flow.ModuleStateDriver.start(ModuleStateDriver.java:119)
         Truncated. see log file for complete stacktrace
    Caused By: java.lang.ClassNotFoundException: oracle.dms.wls.DMSServletFilter
         at weblogic.utils.classloaders.GenericClassLoader.findLocalClass(GenericClassLoader.java:297)
         at weblogic.utils.classloaders.GenericClassLoader.findClass(GenericClassLoader.java:270)
         at weblogic.utils.classloaders.ChangeAwareClassLoader.findClass(ChangeAwareClassLoader.java:64)
         at java.lang.ClassLoader.loadClass(ClassLoader.java:307)
         at java.lang.ClassLoader.loadClass(ClassLoader.java:248)
         Truncated. see log file for complete stacktrace
    >
    <Apr 7, 2011 4:38:13 PM GMT+05:00> <Notice> <Log Management> <BEA-170027> <The Server has established connection with the Domain level Diagnostic Service successfully.>
    <Apr 7, 2011 4:38:14 PM GMT+05:00> <Critical> <WebLogicServer> <BEA-000286> <Failed to invoke startup class "Audit Loader Startup Class", java.lang.ClassNotFoundException: oracle.security.audit.ajl.loader.JEEAuditLoader
    java.lang.ClassNotFoundException: oracle.security.audit.ajl.loader.JEEAuditLoader
         at java.net.URLClassLoader$1.run(URLClassLoader.java:202)
         at java.net.URLClassLoader.findClass(URLClassLoader.java:190)
         at java.lang.ClassLoader.loadClass(ClassLoader.java:307)
         at sun.misc.Launcher$AppClassLoader.loadClass(Launcher.java:308)
         at java.lang.ClassLoader.loadClass(ClassLoader.java:248)
         Truncated. see log file for complete stacktrace
    >
    Its look that libraries are not in class path when i start from the administrative console. What do you suggest? and How we can solve this problem?
    Regards,
    Imran

    Solution: Node manager issue, Node manager incorrectly configured,
    run
    $ ...oracle_common/common/bin/setNMProps.sh
    Then run the node manager start script.
    Other configuration may also be necessary:
    append | *.*.*.* to the incoming socket c.a.s.f for UCM in the em configuration web app ( http://IP:7001/em).
    Edit: above should red | star.star.star.star where star="*"
    Edited by: 849176 on 11-Apr-2011 01:06

  • FRM-92101 There was a failure in the forms server during startup

    Hi guys when running EBS i am getting this error:
    it happens when i try to load any form i.e hrms managemnet --> work structure -> organization
    error : FRM-92101 There was a failure in the forms server during startup
    this could happen due to invalid configuration
    please look into webserver log file for detail
    following are the formsweb.cfg file details:
    -------------------------------------------------------------------------------start----------------------------------------
    [oratest@kapp server]$ vi formsweb.cfg
    [oratest@kapp server]$ tail -1000 formsweb.cfg
    # $Id: formsweb.cfg 15-apr-2005.13:17:30 pkuhn Exp $
    # formsweb.cfg defines parameter values used by the FormsServlet (frmservlet)
    # This section defines the Default settings. Any of them may be overridden in the
    # following Named Configuration sections. If they are not overridden, then the
    # values here will be used.
    # The default settings comprise two types of parameters: System parameters,
    # which cannot be overridden in the URL, and User Parameters, which can.
    # Parameters which are not marked as System parameters are User parameters.
    # SYSTEM PARAMETERS
    # These have fixed names and give information required by the Forms
    # Servlet in order to function. They cannot be specified in the URL query
    # string. But they can be overridden in a named configuration (see below).
    # Some parameters specify file names: if the full path is not given,
    # they are assumed to be in the same directory as this file. If a path
    # is given, then it should be a physical path, not a URL.
    # USER PARAMETERS
    # These match variables (e.g. %form%) in the baseHTML file. Their values
    # may be overridden by specifying them in the URL query string
    # (e.g. "http://myhost.mydomain.com/forms/frmservlet?form=myform&width=700")
    # or by overriding them in a specific, named configuration (see below)
    [default]
    # System parameter: default base HTML file
    baseHTML=base.htm
    # System parameter: base HTML file for use with JInitiator client
    baseHTMLjinitiator=basejini.htm
    # System parameter: base HTML file for use with Sun's Java Plug-In
    baseHTMLjpi=basejpi.htm
    # System parameter: delimiter for parameters in the base HTML files
    HTMLdelimiter=%
    # System parameter: working directory for Forms runtime processes
    # WorkingDirectory defaults to <oracle_home>/forms if unset.
    workingDirectory=
    # System parameter: file setting environment variables for the Forms runtime processes
    envFile=default.env
    # Forms runtime argument: whether to escape certain special characters
    # in values extracted from the URL for other runtime arguments
    escapeparams=true
    # Forms runtime argument: which form module to run
    form=test.fmx
    # Forms runtime argument: database connection details
    userid=
    # Forms runtime argument: whether to run in debug mode
    debug=no
    # Forms runtime argument: host for debugging
    host=
    # Forms runtime argument: port for debugging
    port=
    # Other Forms runtime arguments: grouped together as one parameter.
    # These settings support running and debugging a form from the Builder:
    otherparams=buffer_records=%buffer% debug_messages=%debug_messages% array=%array% obr=%obr% query_only=%query_only% quiet=%quiet% render=%render% record=%record% tracegroup=%tracegroup% log=%log% term=%term%
    # Sub argument for otherparams
    buffer=no
    # Sub argument for otherparams
    debug_messages=no
    # Sub argument for otherparams
    array=no
    # Sub argument for otherparams
    obr=no
    # Sub argument for otherparams
    query_only=no
    # Sub argument for otherparams
    quiet=yes
    # Sub argument for otherparams
    render=no
    # Sub argument for otherparams
    record=
    # Sub argument for otherparams
    tracegroup=
    # Sub argument for otherparams
    log=
    # Sub argument for otherparams
    term=
    # HTML page title
    pageTitle=Oracle Application Server Forms Services
    # HTML attributes for the BODY tag
    HTMLbodyAttrs=
    # HTML to add before the form
    HTMLbeforeForm=
    # HTML to add after the form
    HTMLafterForm=
    # Forms applet parameter: URL path to Forms ListenerServlet
    serverURL=/forms/lservlet
    # Forms applet parameter
    codebase=/forms/java
    # Forms applet parameter
    imageBase=DocumentBase
    # Forms applet parameter
    width=750
    # Forms applet parameter
    height=600
    # Forms applet parameter
    separateFrame=false
    # Forms applet parameter
    splashScreen=
    # Forms applet parameter
    background=
    # Forms applet parameter
    lookAndFeel=Oracle
    # Forms applet parameter
    colorScheme=teal
    # Forms applet parameter
    logo=
    # Forms applet parameter
    restrictedURLparams=HTMLbodyAttrs,HTMLbeforeForm,pageTitle,HTMLafterForm,log,allow_debug,allowNewConnections
    # Forms applet parameter
    formsMessageListener=
    # Forms applet parameter
    recordFileName=
    # Forms applet parameter
    serverApp=default
    # Forms applet archive setting for JInitiator
    archive_jini=frmall_jinit.jar
    # Forms applet archive setting for other clients (Sun Java Plugin, Appletviewer, etc)
    archive=frmall.jar
    # Number of times client should retry if a network failure occurs. You should
    # only change this after reading the documentation.
    networkRetries=0
    # Page displayed to Netscape users to allow them to download Oracle JInitiator.
    # Oracle JInitiator is used with Windows clients.
    # If you create your own page, you should set this parameter to point to it.
    jinit_download_page=/forms/jinitiator/us/jinit_download.htm
    # Parameter related to the version of JInitiator
    jinit_classid=clsid:CAFECAFE-0013-0001-0022-ABCDEFABCDEF
    # Parameter related to the version of JInitiator
    jinit_exename=jinit.exe#Version=1,3,1,22
    # Parameter related to the version of JInitiator
    jinit_mimetype=application/x-jinit-applet;version=1.3.1.22
    # Page displayed to users to allow them to download Sun's Java Plugin.
    # Sun's Java Plugin is typically used for non-Windows clients.
    # (NOTE: you should check this page and possibly change the settings)
    jpi_download_page=http://java.sun.com/products/archive/j2se/1.4.2_06/index.html
    # Parameter related to the version of the Java Plugin
    jpi_classid=clsid:CAFEEFAC-0014-0002-0006-ABCDEFFEDCBA
    # Parameter related to the version of the Java Plugin
    jpi_codebase=http://java.sun.com/products/plugin/autodl/jinstall-1_4_2-windows-i586.cab#Version=1,4,2,06
    # Parameter related to the version of the Java Plugin
    jpi_mimetype=application/x-java-applet;jpi-version=1.4.2_06
    # EM config parameter
    # Set this to "1" to enable Enterprise Manager to track Forms processes
    em_mode=0
    # Single Sign-On OID configuration parameter
    oid_formsid=%OID_FORMSID%
    # Single Sign-On OID configuration parameter
    oracle_home=/mnt/extdrive/VIS/apps/tech_st/10.1.2/
    # Single Sign-On OID configuration parameter
    formsid_group_dn=%GROUP_DN%
    # Single Sign-On OID configuration parameter: indicates whether we allow
    # dynamic resource creation if the resource is not yet created in the OID.
    ssoDynamicResourceCreate=true
    # Single Sign-On parameter: URL to redirect to if ssoDynamicResourceCreate=false
    ssoErrorUrl=
    # Single Sign-On parameter: Cancel URL for the dynamic resource creation DAS page.
    ssoCancelUrl=
    # Single Sign-On parameter: indicates whether the url is protected in which
    # case mod_osso will be given control for authentication or continue in
    # the FormsServlet if not. It is false by default. Set it to true in an
    # application-specific section to enable Single Sign-On for that application.
    ssoMode=false
    # The parameter allow_debug determines whether debugging is permitted.
    # Administrators should set allow_debug to "true" if servlet
    # debugging is required, or to provide access to the Forms Trace Xlate utility.
    # Otherwise these activities will not be allowed (for security reasons).
    allow_debug=false
    # Parameter which determines whether new Forms sessions are allowed.
    # This is also read by the Forms EM Overview page to show the
    # current Forms status.
    allowNewConnections=true
    # EndUserMonitoring
    # EndUserMonitoringEnabled parameter
    # Indicates whether EUM/Chronos integration is enabled
    EndUserMonitoringEnabled=
    # EndUserMonitoringURL
    # indicates where to record EUM/Chronos data
    EndUserMonitoringURL=
    # Example Named Configuration Section
    # Example 1: configuration to run forms in a separate browser window with
    # "generic" look and feel (include "config=sepwin" in the URL)
    # You may define your own specific, named configurations (sets of parameters)
    # by adding special sections as illustrated in the following examples.
    # Note that you need only specify the parameters you want to change. The
    # default values (defined above) will be used for all other parameters.
    # Use of a specific configuration can be requested by including the text
    # "config=<your_config_name>" in the query string of the URL used to run
    # a form. For example, to use the sepwin configuration, your could issue
    # a URL like "http://myhost.mydomain.com/forms/frmservlet?config=sepwin".
    [sepwin]
    separateFrame=True
    lookandfeel=Generic
    # Example Named Configuration Section
    # Example 2: configuration forcing use of the Java Plugin in all cases (even if
    # the client browser is on Windows)
    [jpi]
    baseHTMLJInitiator=basejpi.htm
    # Example Named Configuration Section
    # Example 3: configuration running the Forms ListenerServlet in debug mode
    # (debug messages will be written to the servlet engine's log file).
    [debug]
    serverURL=/forms/lservlet/debug
    # Sample configuration for deploying WebUtil. Note that WebUtil is shipped with
    # DS but not AS and is also available for download from OTN.
    [webutil]
    WebUtilArchive=frmwebutil.jar,jacob.jar
    WebUtilLogging=off
    WebUtilLoggingDetail=normal
    WebUtilErrorMode=Alert
    WebUtilDispatchMonitorInterval=5
    WebUtilTrustInternal=true
    WebUtilMaxTransferSize=16384
    baseHTMLjinitiator=webutiljini.htm
    baseHTMLjpi=webutiljpi.htm
    archive_jini=frmall_jinit.jar
    archive=frmall.jar
    lookAndFeel=orac
    ------------------------------------------------------end----------------------------------------------
    plz help
    regards,
    kashif

    Hi Hussein,
    i got the error in application log that libXm.so.2 is missing, then i installed openmotif to resolve it, but after that form window is not opening.
    and application log is as follows:
    10/10/22 18:41:45.258 10.1.3.0.0 Started
    10/10/22 18:41:46.981 formsweb: FormsServlet init():
    configFileName: /mnt/extdrive/VIS/inst/apps/VIS_kapp/ora/10.1.2/forms/server/appsweb.cfg
    testMode: false
    10/10/22 18:41:46.993 formsweb: 10.1.3.0.0 Started
    10/10/22 18:44:38.873 formsweb: ListenerServlet init()
    10/10/22 18:44:40.204 formsweb: Forms session <1> failed during startup: no response from runtime process
    10/10/22 18:44:40.206 formsweb: Forms session <1> exception stack trace:
    oracle.forms.engine.RunformException: Forms session <1> failed during startup: no response from runtime process
    at oracle.forms.servlet.RunformProcess.connect(Unknown Source)
    at oracle.forms.servlet.RunformProcess.dataToRunform(Unknown Source)
    at oracle.forms.servlet.RunformSession.dataToRunform(Unknown Source)
    at oracle.forms.servlet.ListenerServlet.doPost(Unknown Source)
    at javax.servlet.http.HttpServlet.service(HttpServlet.java:763)
    at javax.servlet.http.HttpServlet.service(HttpServlet.java:856)
    at com.evermind[Oracle Containers for J2EE 10g (10.1.3.0.0) ].server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:719)
    at com.evermind[Oracle Containers for J2EE 10g (10.1.3.0.0) ].server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:376)
    at com.evermind[Oracle Containers for J2EE 10g (10.1.3.0.0) ].server.http.HttpRequestHandler.doProcessRequest(HttpRequestHandler.java:870)
    at com.evermind[Oracle Containers for J2EE 10g (10.1.3.0.0) ].server.http.HttpRequestHandler.processRequest(HttpRequestHandler.java:451)
    at com.evermind[Oracle Containers for J2EE 10g (10.1.3.0.0) ].server.http.AJPRequestHandler.run(AJPRequestHandler.java:299)
    at com.evermind[Oracle Containers for J2EE 10g (10.1.3.0.0) ].server.http.AJPRequestHandler.run(AJPRequestHandler.java:187)
    at oracle.oc4j.network.ServerSocketReadHandler$SafeRunnable.run(ServerSocketReadHandler.java:260)
    at com.evermind[Oracle Containers for J2EE 10g (10.1.3.0.0) ].util.ReleasableResourcePooledExecutor$MyWorker.run(ReleasableResourcePooledExecutor.java:303)
    at java.lang.Thread.run(Thread.java:595)
    10/10/23 14:57:11.795 10.1.3.0.0 Started
    10/10/23 14:57:22.415 formsweb: FormsServlet init():
    configFileName: /mnt/extdrive/VIS/inst/apps/VIS_kapp/ora/10.1.2/forms/server/appsweb.cfg
    testMode: false
    10/10/23 14:57:22.641 formsweb: 10.1.3.0.0 Started
    10/10/23 15:01:33.111 formsweb: 10.1.3.0.0 Stopped
    10/10/23 15:05:56.542 10.1.3.0.0 Started
    10/10/23 15:05:58.541 formsweb: FormsServlet init():
    configFileName: /mnt/extdrive/VIS/inst/apps/VIS_kapp/ora/10.1.2/forms/server/appsweb.cfg
    testMode: false
    10/10/23 15:05:58.652 formsweb: 10.1.3.0.0 Started
    10/10/23 15:15:29.23 formsweb: Servlet error
    java.io.IOException: Broken pipe
    at sun.nio.ch.FileDispatcher.write0(Native Method)
    at sun.nio.ch.SocketDispatcher.write(SocketDispatcher.java:29)
    at sun.nio.ch.IOUtil.writeFromNativeBuffer(IOUtil.java:104)
    at sun.nio.ch.IOUtil.write(IOUtil.java:75)
    at sun.nio.ch.SocketChannelImpl.write(SocketChannelImpl.java:302)
    at java.nio.channels.Channels.write(Channels.java:60)
    at java.nio.channels.Channels.access$000(Channels.java:47)
    at java.nio.channels.Channels$1.write(Channels.java:134)
    at com.evermind.server.http.AJPOutputStream.endRequest(AJPOutputStream.java:117)
    at com.evermind.server.http.AJPRequestHandler.run(AJPRequestHandler.java:306)
    at com.evermind.server.http.AJPRequestHandler.run(AJPRequestHandler.java:187)
    at oracle.oc4j.network.ServerSocketReadHandler$SafeRunnable.run(ServerSocketReadHandler.java:260)
    at com.evermind.util.ReleasableResourcePooledExecutor$MyWorker.run(ReleasableResourcePooledExecutor.java:303)
    at java.lang.Thread.run(Thread.java:595)
    10/10/23 15:32:28.558 formsweb: 10.1.3.0.0 Stopped
    10/10/23 15:33:44.992 10.1.3.0.0 Started
    10/10/23 15:33:46.570 formsweb: FormsServlet init():
    configFileName: /mnt/extdrive/VIS/inst/apps/VIS_kapp/ora/10.1.2/forms/server/appsweb.cfg
    testMode: false
    10/10/23 15:33:46.610 formsweb: 10.1.3.0.0 Started
    regards,
    kashif

  • FRM-92101- There is a failure in the form server during startup.

    Hi,
    I'm deploying a forms 10g application . I'm using Oracle Application Server Forms and Reports Services 10.1.2.0.2 under Red Hat Enterprise Linux 5, along with an Oracle 10g Database on another server. Every time I try testing the form services using http://10.0.4.114:7778/forms/frmservlet it brings out the errorFRM-92101- There is a failure in the form server during startup. This could happen due to invalid configuration. Please look into the web server log file for detail
    Right now, I'm a bit lost. Can anyone please tell me if there is some parameter I have to set, or something I should do to make it work?
    Thanks a lot

    Fabian,
    I did not make changes to those files. The forms services are working on another server with Red hat Rel 4 and 3 . What I did is to configure a new server with Red Hat Rel 5 , took the backup of all the forms binaries and the HOME and restore on the new server. I did the same thing for a server running rel 4 and it has no issue:
    The content of the files are as below:
    DEFAULT.ENV*
    # $Id: default.env 26-apr-2005.16:59:08 sujain Exp $
    # default.env - default Forms environment file, Solaris version
    # This file is used to set the Forms runtime environment parameters.
    # If a parameter is not defined here, the value used will be that defined
    # in the environment in which the servlet engine (OC4J or JServ) was started.
    # NOTES
    # 1/ The Forms installation process should replace all occurrences of
    # <percent>FORMS_ORACLE_HOME<percent> with the correct ORACLE_HOME
    # setting, and all occurrences of <percent>O_JDK_HOME<percent> with
    # the location of the JDK (usually $ORACLE_HOME/jdk).
    # Please make these changes manually if not.
    # 2/ Some of the variables below may need to be changed to suite your needs.
    # Please refer to the Forms documentation for details.
    ORACLE_HOME=/u01/oracle10g_Forms
    FORMS_PATH=/u/oracle/bank/gmx
    REPORTS_PATH=/u/oracle/bank/fonts
    #TWO_TASK=rac.world4
    TWO_TASK=server.world
    #TWO_TASK=server1.world
    #TWO_TASK=s0999001.world4
    #TWO_TASK=s0202001.world4
    #TWO_TASK=server.world4
    NLS_LANG=AMERICAN_AMERICA.AR8MSWIN1256
    NLS_DATE_FORMAT=DDMMYYYY
    # Search path for Forms applications (.fmx files, PL/SQL libraries)
    # FORMS_PATH=/u01/oracle10g_Forms/forms
    # webutil config file path
    WEBUTIL_CONFIG=/u01/oracle10g_Forms/forms/server/webutil.cfg
    # Disable/remove this variable if end-users need access to the query-where
    # functionality which potentially allows them to enter arbitrary SQL
    # statements when in enter-query mode.
    FORMS_RESTRICT_ENTER_QUERY=TRUE
    # Java class path
    # This is required for the Forms debugger
    # You can append your own Java code here)
    # frmsrv.jar, repository.jar and ldapjclnt10.jar are required for
    # the password expiry feature to work(#2213140).
    CLASSPATH=/u01/oracle10g_Forms/j2ee/OC4J_BI_Forms/applications/formsapp/formsweb/WEB-INF/lib/frmsrv.jar:/u01/oracle10g_Forms/jlib/repository.jar:/u01/oracle10g_Forms/jlib/ldapjclnt10.jar:/u01/oracle10g_Forms/jlib/debugger.jar:/u01/oracle10g_Forms/jlib/ewt3.jar:/u01/oracle10g_Forms/jlib/share.jar:/u01/oracle10g_Forms/jlib/utj.jar:/u01/oracle10g_Forms/jlib/zrclient.jar:/u01/oracle10g_Forms/reports/jlib/rwrun.jar:/u01/oracle10g_Forms/forms/java/frmwebutil.jar:/u01/oracle10g_Forms/forms/java/frmrwinteg.jar:/u01/oracle10g_Forms/forms/java/webutil.jar
    # The PATH setting is not required for Forms if the Forms executables are
    # in <ORACLE_HOME>/bin. However, it is required if Graphics applications
    # are called from Forms applications.
    PATH=/usr/bin:/sbin:/bin:/u01/oracle10g_Forms/bin
    # Settings for Reports
    # NOTE: This setting is only needed if Reports applications
    # are called from Forms applications
    # However, because of bug 2336698 where a report is started from
    # a forms debugger session with an already running JVM, then
    # the report's class path should also be included in the forms
    # class path.
    # We no longer need to set REPORTS_CLASSPATH as forms will
    # always start the JVM before calling reports.
    # Settings for Graphics
    # NOTE: These settings are only needed if Graphics applications
    # are called from Forms applications
    # Please uncomment the following and put the correct 6i
    # oracle_home value to use Graphics applications.
    #ORACLE_GRAPHICS6I_HOME=<your Graphics 6i oracle_home here>
    # Search path for Graphics applications
    GRAPHICS60_PATH=
    # Settings for Forms tracing and logging
    # Note: This entry has to be uncommented to enable tracing and
    # logging.
    #FORMS_TRACE_PATH=<FORMS_ORACLE_HOME>/forms/server
    # System settings
    # You should not normally need to modify these settings
    # Path for shared library objects
    # This is highly platform (if not machine) specific ! At install time
    # <percent>LD_LIBRARY_PATH<percent> should be replaced with the
    # actual value of the LD_LIBRARY_PATH environment variable (at install
    # time). That should ensure we have the paths for such necessities as
    # the motif and X11 libraries.
    # Explanations:
    # - Reports needs the path for libjava.so
    # (.../jre/lib/sparc)
    # - Forms needs two paths to the jre, for libjvm.so and libhpi.so
    # - In JDK 1.4.1 the location of libjvm.so is lib/sparc (there is no
    # classic directory) so we do not include the .../classic directory
    # below. There are other versions of libjvm.so (in directories server,
    # client and hotspot) but we will use the version in lib/sparc for now.
    LD_LIBRARY_PATH=/u01/oracle10g_Forms/lib:/u01/oracle10g_Forms/jdk/jre/lib/i386:/u01/oracle10g_Forms/jdk/jre/lib/i386/server:/u01/oracle10g_Forms/jdk/jre/lib/i386/native_threads:/u01/oracle10g_Forms/inventory/filemap/jre/1.4.2/lib/i386/client:/u01/oracle10g_Forms/inventory/filemap/jre/1.4.2/lib/i386:/usr/lib:/u01/oracle10g_Forms/jdk/jre/lib/i386/server:/u01/oracle10g_Forms/jdk/jre/lib/i386/native_threads:/u01/oracle10g_Forms/jdk/jre/lib/i386:/u01/oracle10g_Forms/jdk/jre/lib/i386:/usr/lib:/u01/oracle10g_Forms/lib:/u01/oracle10g_Forms/classes/lib:/u01/oracle10g_Forms/ifs1.1/lib:/u01/oracle10g_Forms/jis/lib
    LD_ASSUME_KERNEL=2.4.19
    FORMSWEB*
    # $Id: formsweb.cfg 15-apr-2005.13:17:30 pkuhn Exp $
    # formsweb.cfg defines parameter values used by the FormsServlet (frmservlet)
    # This section defines the Default settings. Any of them may be overridden in the
    # following Named Configuration sections. If they are not overridden, then the
    # values here will be used.
    # The default settings comprise two types of parameters: System parameters,
    # which cannot be overridden in the URL, and User Parameters, which can.
    # Parameters which are not marked as System parameters are User parameters.
    # SYSTEM PARAMETERS
    # These have fixed names and give information required by the Forms
    # Servlet in order to function. They cannot be specified in the URL query
    # string. But they can be overridden in a named configuration (see below).
    # Some parameters specify file names: if the full path is not given,
    # they are assumed to be in the same directory as this file. If a path
    # is given, then it should be a physical path, not a URL.
    # USER PARAMETERS
    # These match variables (e.g. %form%) in the baseHTML file. Their values
    # may be overridden by specifying them in the URL query string
    # (e.g. "http://myhost.mydomain.com/forms/frmservlet?form=myform&width=700")
    # or by overriding them in a specific, named configuration (see below)
    [default]
    # System parameter: default base HTML file
    baseHTML=base.htm
    # System parameter: base HTML file for use with JInitiator client
    baseHTMLjinitiator=basejini.htm
    # System parameter: base HTML file for use with Sun's Java Plug-In
    baseHTMLjpi=basejpi.htm
    # System parameter: delimiter for parameters in the base HTML files
    HTMLdelimiter=%
    # System parameter: working directory for Forms runtime processes
    # WorkingDirectory defaults to <oracle_home>/forms if unset.
    workingDirectory=
    # System parameter: file setting environment variables for the Forms runtime processes
    envFile=default.env
    # Forms runtime argument: whether to escape certain special characters
    # in values extracted from the URL for other runtime arguments
    escapeparams=true
    # Forms runtime argument: which form module to run
    #form=test.fmx
    form=B08SSS20.fmx
    # Forms runtime argument: database connection details
    userid=guiusr/guiusr
    # Forms runtime argument: whether to run in debug mode
    debug=no
    # Forms runtime argument: host for debugging
    host=
    # Forms runtime argument: port for debugging
    port=
    # Other Forms runtime arguments: grouped together as one parameter.
    # These settings support running and debugging a form from the Builder:
    otherparams=buffer_records=%buffer% debug_messages=%debug_messages% array=%array% obr=%obr% query_only=%query_only% quiet=%quiet% render=%render% record=%record% tracegroup=%tracegroup% log=%log% term=%term%
    # Sub argument for otherparams
    buffer=no
    # Sub argument for otherparams
    debug_messages=no
    # Sub argument for otherparams
    array=no
    # Sub argument for otherparams
    obr=no
    # Sub argument for otherparams
    query_only=no
    # Sub argument for otherparams
    quiet=yes
    # Sub argument for otherparams
    render=no
    # Sub argument for otherparams
    record=
    # Sub argument for otherparams
    tracegroup=
    # Sub argument for otherparams
    log=
    # Sub argument for otherparams
    term=
    # HTML page title
    pageTitle=Oracle Application Server Forms Services
    # HTML attributes for the BODY tag
    HTMLbodyAttrs=
    # HTML to add before the form
    HTMLbeforeForm=
    # HTML to add after the form
    HTMLafterForm=
    # Forms applet parameter: URL path to Forms ListenerServlet
    serverURL=/forms/lservlet
    # Forms applet parameter
    codebase=/forms/java
    # Forms applet parameter
    imageBase=DocumentBase
    # Forms applet parameter
    width=900
    # Forms applet parameter
    height=800
    # Forms applet parameter
    separateFrame=true
    # Forms applet parameter
    splashScreen=no
    # Forms applet parameter
    background=no
    # Forms applet parameter
    lookAndFeel=Oracle
    # Forms applet parameter
    colorScheme=blue
    # Forms applet parameter
    logo=no
    # Forms applet parameter
    restrictedURLparams=HTMLbodyAttrs,HTMLbeforeForm,pageTitle,HTMLafterForm,log,allow_debug,allowNewConnections
    # Forms applet parameter
    formsMessageListener=
    # Forms applet parameter
    recordFileName=
    # Forms applet parameter
    serverApp=default
    # Forms applet archive setting for JInitiator
    archive_jini=frmall_jinit.jar,timeout.jar,frmrwinteg.jar,webutil.jar
    # Forms applet archive setting for other clients (Sun Java Plugin, Appletviewer, etc)
    archive=frmall.jar
    # Number of times client should retry if a network failure occurs. You should
    # only change this after reading the documentation.
    networkRetries=30
    # Page displayed to Netscape users to allow them to download Oracle JInitiator.
    # Oracle JInitiator is used with Windows clients.
    # If you create your own page, you should set this parameter to point to it.
    jinit_download_page=/forms/jinitiator/us/jinit_download.htm
    # Parameter related to the version of JInitiator
    jinit_classid=clsid:CAFECAFE-0013-0001-0022-ABCDEFABCDEF
    # Parameter related to the version of JInitiator
    jinit_exename=jinit.exe#Version=1,3,1,22
    # Parameter related to the version of JInitiator
    jinit_mimetype=application/x-jinit-applet;version=1.3.1.22
    # Page displayed to users to allow them to download Sun's Java Plugin.
    # Sun's Java Plugin is typically used for non-Windows clients.
    # (NOTE: you should check this page and possibly change the settings)
    jpi_download_page=http://java.sun.com/products/archive/j2se/1.4.2_06/index.html
    # Parameter related to the version of the Java Plugin
    jpi_classid=clsid:CAFEEFAC-0014-0002-0006-ABCDEFFEDCBA
    # Parameter related to the version of the Java Plugin
    jpi_codebase=http://java.sun.com/products/plugin/autodl/jinstall-1_4_2-windows-i586.cab#Version=1,4,2,06
    # Parameter related to the version of the Java Plugin
    jpi_mimetype=application/x-java-applet;jpi-version=1.4.2_06
    # EM config parameter
    # Set this to "1" to enable Enterprise Manager to track Forms processes
    em_mode=1
    # Single Sign-On OID configuration parameter
    oid_formsid=%OID_FORMSID%
    # Single Sign-On OID configuration parameter
    oracle_home=/u01/oracle10g_Forms
    # Single Sign-On OID configuration parameter
    formsid_group_dn=%GROUP_DN%
    # Single Sign-On OID configuration parameter: indicates whether we allow
    # dynamic resource creation if the resource is not yet created in the OID.
    ssoDynamicResourceCreate=true
    # Single Sign-On parameter: URL to redirect to if ssoDynamicResourceCreate=false
    ssoErrorUrl=
    # Single Sign-On parameter: Cancel URL for the dynamic resource creation DAS page.
    ssoCancelUrl=
    # Single Sign-On parameter: indicates whether the url is protected in which
    # case mod_osso will be given control for authentication or continue in
    # the FormsServlet if not. It is false by default. Set it to true in an
    # application-specific section to enable Single Sign-On for that application.
    ssoMode=false
    # The parameter allow_debug determines whether debugging is permitted.
    # Administrators should set allow_debug to "true" if servlet
    # debugging is required, or to provide access to the Forms Trace Xlate utility.
    # Otherwise these activities will not be allowed (for security reasons).
    allow_debug=true
    # Parameter which determines whether new Forms sessions are allowed.
    # This is also read by the Forms EM Overview page to show the
    # current Forms status.
    allowNewConnections=true
    # EndUserMonitoring
    # EndUserMonitoringEnabled parameter
    # Indicates whether EUM/Chronos integration is enabled
    EndUserMonitoringEnabled=
    # EndUserMonitoringURL
    # indicates where to record EUM/Chronos data
    EndUserMonitoringURL=
    # Example Named Configuration Section
    # Example 1: configuration to run forms in a separate browser window with
    # "generic" look and feel (include "config=sepwin" in the URL)
    # You may define your own specific, named configurations (sets of parameters)
    # by adding special sections as illustrated in the following examples.
    # Note that you need only specify the parameters you want to change. The
    # default values (defined above) will be used for all other parameters.
    # Use of a specific configuration can be requested by including the text
    # "config=<your_config_name>" in the query string of the URL used to run
    # a form. For example, to use the sepwin configuration, your could issue
    # a URL like "http://myhost.mydomain.com/forms/frmservlet?config=sepwin".
    [sepwin]
    separateFrame=True
    lookandfeel=Generic
    # Example Named Configuration Section
    # Example 2: configuration forcing use of the Java Plugin in all cases (even if
    # the client browser is on Windows)
    [jpi]
    baseHTMLJInitiator=basejpi.htm
    # Example Named Configuration Section
    # Example 3: configuration running the Forms ListenerServlet in debug mode
    # (debug messages will be written to the servlet engine's log file).
    [debug]
    serverURL=/forms/lservlet/debug
    # Sample configuration for deploying WebUtil. Note that WebUtil is shipped with
    # DS but not AS and is also available for download from OTN.
    [webutil]
    WebUtilArchive=frmwebutil.jar,jacob.jar
    WebUtilLogging=off
    WebUtilLoggingDetail=normal
    WebUtilErrorMode=Alert
    WebUtilDispatchMonitorInterval=5
    WebUtilTrustInternal=true
    WebUtilMaxTransferSize=16384
    baseHTMLjinitiator=webutiljini.htm
    baseHTMLjpi=webutiljpi.htm
    archive_jini=frmall_jinit.jar
    archive=frmall.jar
    lookAndFeel=oracle
    [ref]
    #serverURL=/forms/lservlet/perf
    serverURL=/forms/lservlet/
    #otherparams=P_WST_LAN_IND=1 record=forms tracegroup=0-199
    #envFile=default.env
    [nat]
    #serverURL=/forms/lservlet/perf
    serverURL=/forms/lservlet/sessionperf
    #envFile=defaultar.env
    ERROR IN Java console is
    Oracle JInitiator: Version 1.3.1.22
    Using JRE version 1.3.1.22-internal Java HotSpot(TM) Client VM
    User home directory = C:\Documents and Settings\akintayo.beckley.GTBANK
    c: clear console window
    f: finalize objects on finalization queue
    g: garbage collect
    h: display this help message
    l: dump classloader list
    m: print memory usage
    q: hide console
    s: dump system properties
    t: dump thread list
    x: clear classloader cache
    0-5: set trace level to <n>
    proxyHost=null
    proxyPort=0
    connectMode=HTTP, native.
    oracle.forms.net.ConnectionException: Forms session <1> failed during
    startup: no response from runtime process
    at
    oracle.forms.net.ConnectionException.createConnectionException(Unknown
    Source)
    at oracle.forms.net.HTTPNStream.getResponse(Unknown Source)
    at oracle.forms.net.HTTPNStream.doFlush(Unknown Source)
    at oracle.forms.net.HTTPNStream.flush(Unknown Source)
    at java.io.DataOutputStream.flush(Unknown Source)
    at oracle.forms.net.HTTPConnection.connect(Unknown Source)
    at oracle.forms.engine.FormsDispatcher.initConnection(Unknown Source)
    at oracle.forms.engine.FormsDispatcher.init(Unknown Source)
    at oracle.forms.engine.Runform.initConnection(Unknown Source)
    at oracle.forms.engine.Runform.startRunform(Unknown Source)
    at oracle.forms.engine.Main.createRunform(Unknown Source)
    at oracle.forms.engine.Main.start(Unknown Source)
    at sun.applet.AppletPanel.run(Unknown Source)
    at java.lang.Thread.run(Unknown Source)

  • Managed server failed during start

    I am trying to start my Managed instance ( located on a box different from Admin) but I do not know why its getting failed.
    However one more instance running fine which exists on the same box and using the same node manager.
    Below is the errors I am seeing in the server.log file;
    #<Feb 8, 2010 11:09:36 AM CST> <Critical> <WebLogicServer> <xltwls02> <CargomaxMDB2> <Main Thread> <<WLS Kernel>> <> <> <1265648976581> <BEA-000386> <Server subsystem failed.
    Reason: java.lang.AssertionError: java.lang.ClassNotFoundException: weblogic.jndi.internal.ServerNamingNode_922_WLStub
    java.lang.AssertionError: java.lang.ClassNotFoundException: weblogic.jndi.internal.ServerNamingNode_922_WLStub
    at weblogic.jndi.WLInitialContextFactoryDelegate.newRootNamingNodeStub(WLInitialContextFactoryDelegate.java:595)
    at weblogic.jndi.WLInitialContextFactoryDelegate.newRemoteContext(WLInitialContextFactoryDelegate.java:567)
    at weblogic.jndi.WLInitialContextFactoryDelegate.newContext(WLInitialContextFactoryDelegate.java:475)
    at weblogic.jndi.WLInitialContextFactoryDelegate.getInitialContext(WLInitialContextFactoryDelegate.java:373)
    at weblogic.jndi.Environment.getContext(Environment.java:307)
    at weblogic.jndi.Environment.getContext(Environment.java:277)
    at weblogic.jndi.Environment.createInitialContext(Environment.java:200)
    at weblogic.jndi.Environment.getInitialContext(Environment.java:184)
    at weblogic.jndi.Environment.getInitialContext(Environment.java:162)
    at weblogic.management.mbeanservers.compatibility.internal.CompatibilityMBeanServerService.start(CompatibilityMBeanServerService.java:154)
    at weblogic.t3.srvr.SubsystemRequest.run(SubsystemRequest.java:64)
    at weblogic.work.ExecuteThread.execute(ExecuteThread.java:209)
    at weblogic.work.ExecuteThread.run(ExecuteThread.java:181)
    java.lang.ClassNotFoundException: weblogic.jndi.internal.ServerNamingNode_922_WLStub
    at java.lang.Class.forName0(Native Method)
    at java.lang.Class.forName(Class.java:164)
    at weblogic.jndi.WLInitialContextFactoryDelegate.newRootNamingNodeStub(WLInitialContextFactoryDelegate.java:591)
    at weblogic.jndi.WLInitialContextFactoryDelegate.newRemoteContext(WLInitialContextFactoryDelegate.java:567)
    at weblogic.jndi.WLInitialContextFactoryDelegate.newContext(WLInitialContextFactoryDelegate.java:475)
    at weblogic.jndi.WLInitialContextFactoryDelegate.getInitialContext(WLInitialContextFactoryDelegate.java:373)
    at weblogic.jndi.Environment.getContext(Environment.java:307)
    at weblogic.jndi.Environment.getContext(Environment.java:277)
    at weblogic.jndi.Environment.createInitialContext(Environment.java:200)
    at weblogic.jndi.Environment.getInitialContext(Environment.java:184)
    at weblogic.jndi.Environment.getInitialContext(Environment.java:162)
    at weblogic.management.mbeanservers.compatibility.internal.CompatibilityMBeanServerService.start(CompatibilityMBeanServerService.java:154)
    at weblogic.t3.srvr.SubsystemRequest.run(SubsystemRequest.java:64)
    at weblogic.work.ExecuteThread.execute(ExecuteThread.java:209)
    at weblogic.work.ExecuteThread.run(ExecuteThread.java:181)
    I am also pasting below the error I am seeing in Server.out file
    <Feb 8, 2010 11:09:31 AM CST> <Notice> <Log Management> <BEA-170019> <The server log file /opt/WeblogicLogs/cargomax/Dev/CargomaxMDB2/logs/CargomaxMDB2.log is opened. All server
    side log events will be written to this file.>
    <Feb 8, 2010 11:09:35 AM CST> <Notice> <Security> <BEA-090082> <Security initializing using security realm myrealm.>
    <Feb 8, 2010 11:09:36 AM CST> <Critical> <WebLogicServer> <BEA-000386> <Server subsystem failed. Reason: java.lang.AssertionError: java.lang.ClassNotFoundException: weblogic.jnd
    i.internal.ServerNamingNode_922_WLStub
    java.lang.AssertionError: java.lang.ClassNotFoundException: weblogic.jndi.internal.ServerNamingNode_922_WLStub
    at weblogic.jndi.WLInitialContextFactoryDelegate.newRootNamingNodeStub(WLInitialContextFactoryDelegate.java:595)
    at weblogic.jndi.WLInitialContextFactoryDelegate.newRemoteContext(WLInitialContextFactoryDelegate.java:567)
    at weblogic.jndi.WLInitialContextFactoryDelegate.newContext(WLInitialContextFactoryDelegate.java:475)
    at weblogic.jndi.WLInitialContextFactoryDelegate.getInitialContext(WLInitialContextFactoryDelegate.java:373)
    at weblogic.jndi.Environment.getContext(Environment.java:307)
    Truncated. see log file for complete stacktrace
    java.lang.ClassNotFoundException: weblogic.jndi.internal.ServerNamingNode_922_WLStub
    at java.lang.Class.forName0(Native Method)
    at java.lang.Class.forName(Class.java:164)
    at weblogic.jndi.WLInitialContextFactoryDelegate.newRootNamingNodeStub(WLInitialContextFactoryDelegate.java:591)
    at weblogic.jndi.WLInitialContextFactoryDelegate.newRemoteContext(WLInitialContextFactoryDelegate.java:567)
    at weblogic.jndi.WLInitialContextFactoryDelegate.newContext(WLInitialContextFactoryDelegate.java:475)
    Truncated. see log file for complete stacktrace
    >
    The WebLogic Server encountered a critical failure
    Reason: Failed to load stub for class class weblogic.server.RemoteLifeCycleOperationsImpl
    Exception in thread "Main Thread" java.lang.AssertionError: Failed to load stub for class class weblogic.server.RemoteLifeCycleOperationsImpl
    at weblogic.rmi.extensions.StubFactory.getStub(StubFactory.java:147)
    at weblogic.rmi.extensions.StubFactory.getStub(StubFactory.java:126)
    at weblogic.jndi.WLInitialContextFactoryDelegate.getInitialReference(WLInitialContextFactoryDelegate.java:424)
    at weblogic.jndi.Environment.getInitialReference(Environment.java:237)
    at weblogic.server.ServerLifeCycleRuntime.getLifeCycleOperationsRemote(ServerLifeCycleRuntime.java:678)
    at weblogic.t3.srvr.ServerRuntime.sendStateToAdminServer(ServerRuntime.java:406)
    at weblogic.t3.srvr.ServerRuntime.updateRunState(ServerRuntime.java:392)
    at weblogic.t3.srvr.T3Srvr.setState(T3Srvr.java:172)
    at weblogic.t3.srvr.T3Srvr.run(T3Srvr.java:373)
    at weblogic.Server.main(Server.java:67)
    <Feb 8, 2010 11:09:37 AM> <Info> <NodeManager> <Server failed during startup so will not be restarted>
    Thanks in Advance!

    Sorry I think I made a mistake while pasting complete classpath, the classpath we are using is
    <class-path>/opt/WeblogicApps/cargomax/cargomaxDomainDev/lib/CR326377_92mp2.jar:/opt/Weblogic/WLS9.2.2/patch_weblogic922/profiles/default/sys_manifest_classpath/weblogic_patch.jar:/opt/Weblogic/WLS9.2.2/jrockit90_150_10/lib/tools.jar:/opt/Weblogic/WLS9.2.2/server/lib/weblogic_sp.jar:/opt/WeblogicApps/cargomax/cargomaxDomainDev/lib/tibjms.jar:/opt/Weblogic/WLS9.2.2/server/lib/weblogic.jar:/opt/Weblogic/WLS9.2.2/server/lib/webservices.jar:/opt/Weblogic/WLS9.2.2/common/eval/pointbase/lib/pbclient51.jar:/opt/Weblogic/WLS9.2.2/server/lib/xqrl.jar:/opt/Weblogic/WLS9.2.2/platform/lib/p13n/p13n-schemas.jar:/opt/Weblogic/WLS9.2.2/platform/lib/p13n/p13n_common.jar:/opt/Weblogic/WLS9.2.2/platform/lib/p13n/p13n_system.jar:/opt/Weblogic/WLS9.2.2/platform/lib/wlp/netuix_common.jar:/opt/Weblogic/WLS9.2.2/platform/lib/wlp/netuix_schemas.jar:/opt/Weblogic/WLS9.2.2/platform/lib/wlp/netuix_system.jar:/opt/Weblogic/WLS9.2.2/platform/lib/wlp/wsrp-common.jar:/opt/WeblogicApps/cargomax/cargomaxDomainDev/lib/swalog4j-1.1.jar</class-path>
    I compared the classpath of the MS1 ( Running fine on Machine1, on the same box Admin is also running fine. ) and MS2. They are exactly same and we are passing the same start up argument.
    But when I am trying to start the MS2 through admin console its throwing the same error.
    The Server out log says:
    <Feb 10, 2010 3:17:29 PM CST> <Notice> <Security> <BEA-090082> <Security initializing using security realm myrealm.>
    <Feb 10, 2010 3:17:30 PM CST> <Critical> <WebLogicServer> <BEA-000386> <Server subsystem failed. Reason: java.lang.AssertionError: java.lang.ClassNotFoundException: weblogic.jnd
    i.internal.ServerNamingNode_922_WLStub
    java.lang.AssertionError: java.lang.ClassNotFoundException: weblogic.jndi.internal.ServerNamingNode_922_WLStub
    at weblogic.jndi.WLInitialContextFactoryDelegate.newRootNamingNodeStub(WLInitialContextFactoryDelegate.java:595)
    at weblogic.jndi.WLInitialContextFactoryDelegate.newRemoteContext(WLInitialContextFactoryDelegate.java:567)
    at weblogic.jndi.WLInitialContextFactoryDelegate.newContext(WLInitialContextFactoryDelegate.java:475)
    at weblogic.jndi.WLInitialContextFactoryDelegate.getInitialContext(WLInitialContextFactoryDelegate.java:373)
    at weblogic.jndi.Environment.getContext(Environment.java:307)
    Truncated. see log file for complete stacktrace
    java.lang.ClassNotFoundException: weblogic.jndi.internal.ServerNamingNode_922_WLStub
    at java.lang.Class.forName0(Native Method)
    at java.lang.Class.forName(Class.java:164)
    at weblogic.jndi.WLInitialContextFactoryDelegate.newRootNamingNodeStub(WLInitialContextFactoryDelegate.java:591)
    at weblogic.jndi.WLInitialContextFactoryDelegate.newRemoteContext(WLInitialContextFactoryDelegate.java:567)
    at weblogic.jndi.WLInitialContextFactoryDelegate.newContext(WLInitialContextFactoryDelegate.java:475)
    Truncated. see log file for complete stacktrace
    >
    The WebLogic Server encountered a critical failure
    Reason: Failed to load stub for class class weblogic.server.RemoteLifeCycleOperationsImpl
    Exception in thread "Main Thread" java.lang.AssertionError: Failed to load stub for class class weblogic.server.RemoteLifeCycleOperationsImpl
    at weblogic.rmi.extensions.StubFactory.getStub(StubFactory.java:147)
    at weblogic.rmi.extensions.StubFactory.getStub(StubFactory.java:126)
    at weblogic.jndi.WLInitialContextFactoryDelegate.getInitialReference(WLInitialContextFactoryDelegate.java:424)
    at weblogic.jndi.Environment.getInitialReference(Environment.java:237)
    at weblogic.server.ServerLifeCycleRuntime.getLifeCycleOperationsRemote(ServerLifeCycleRuntime.java:678)
    at weblogic.t3.srvr.ServerRuntime.sendStateToAdminServer(ServerRuntime.java:406)
    at weblogic.t3.srvr.ServerRuntime.updateRunState(ServerRuntime.java:392)
    at weblogic.t3.srvr.T3Srvr.setState(T3Srvr.java:172)
    at weblogic.t3.srvr.T3Srvr.run(T3Srvr.java:373)
    at weblogic.Server.main(Server.java:67)
    <Feb 10, 2010 3:17:31 PM> <Info> <NodeManager> <Server failed during startup so will not be restarted>
    And the server log says:
    LS Kernel>> <> <> <1265836650371> <BEA-400000> <Initializing message interception service>
    ####<Feb 10, 2010 3:17:30 PM CST> <Critical> <WebLogicServer> <xltwls02> <CargomaxMDB2> <Main Thread> <<WLS Kernel>> <> <> <1265836650628> <BEA-000386> <Server subsystem failed.
    Reason: java.lang.AssertionError: java.lang.ClassNotFoundException: weblogic.jndi.internal.ServerNamingNode_922_WLStub
    java.lang.AssertionError: java.lang.ClassNotFoundException: weblogic.jndi.internal.ServerNamingNode_922_WLStub
    at weblogic.jndi.WLInitialContextFactoryDelegate.newRootNamingNodeStub(WLInitialContextFactoryDelegate.java:595)
    at weblogic.jndi.WLInitialContextFactoryDelegate.newRemoteContext(WLInitialContextFactoryDelegate.java:567)
    at weblogic.jndi.WLInitialContextFactoryDelegate.newContext(WLInitialContextFactoryDelegate.java:475)
    at weblogic.jndi.WLInitialContextFactoryDelegate.getInitialContext(WLInitialContextFactoryDelegate.java:373)
    at weblogic.jndi.Environment.getContext(Environment.java:307)
    at weblogic.jndi.Environment.getContext(Environment.java:277)
    at weblogic.jndi.Environment.createInitialContext(Environment.java:200)
    at weblogic.jndi.Environment.getInitialContext(Environment.java:184)
    at weblogic.jndi.Environment.getInitialContext(Environment.java:162)
    at weblogic.management.mbeanservers.compatibility.internal.CompatibilityMBeanServerService.start(CompatibilityMBeanServerService.java:154)
    at weblogic.t3.srvr.SubsystemRequest.run(SubsystemRequest.java:64)
    at weblogic.work.ExecuteThread.execute(ExecuteThread.java:209)
    at weblogic.work.ExecuteThread.run(ExecuteThread.java:181)
    java.lang.ClassNotFoundException: weblogic.jndi.internal.ServerNamingNode_922_WLStub
    at java.lang.Class.forName0(Native Method)
    at java.lang.Class.forName(Class.java:164)
    at weblogic.jndi.WLInitialContextFactoryDelegate.newRootNamingNodeStub(WLInitialContextFactoryDelegate.java:591)
    at weblogic.jndi.WLInitialContextFactoryDelegate.newRemoteContext(WLInitialContextFactoryDelegate.java:567)
    at weblogic.jndi.WLInitialContextFactoryDelegate.newContext(WLInitialContextFactoryDelegate.java:475)
    at weblogic.jndi.WLInitialContextFactoryDelegate.getInitialContext(WLInitialContextFactoryDelegate.java:373)
    at weblogic.jndi.Environment.getContext(Environment.java:307)
    at weblogic.jndi.Environment.getContext(Environment.java:277)
    at weblogic.jndi.Environment.createInitialContext(Environment.java:200)
    at weblogic.jndi.Environment.getInitialContext(Environment.java:184)
    at weblogic.jndi.Environment.getInitialContext(Environment.java:162)
    at weblogic.management.mbeanservers.compatibility.internal.CompatibilityMBeanServerService.start(CompatibilityMBeanServerService.java:154)
    at weblogic.t3.srvr.SubsystemRequest.run(SubsystemRequest.java:64)
    at weblogic.work.ExecuteThread.execute(ExecuteThread.java:209)
    at weblogic.work.ExecuteThread.run(ExecuteThread.java:181)
    >
    Please advice me if you have any workaround or solution in your mind.

  • FRM-92101: There was a failure in the Forms Server during startup.R12.1-WXP

    Hi All,
    I have installed R12.1 on Windows XP Professional.
    When I open any form after login the application gives the following error message instead of opening the form:
    FRM-92101: There was a failure in the Forms Server during startup. This could happened due to invalid configruation. Please look into the web-server log file for details.
    Details...
    Java Exception:
    oracle.forms.net.ConnectionException: Forms session (6) failed during startup: no response form runtime process
    at oracle.forms.net.ConnectionException.createConnectionException(Unknown Source)
    at oracle.forms.net.HTTPNStream.getResponse(Unknown Source)
    at oracle.forms.net.HTTPNStream.doFlush(Unknown Source)
    at oracle.forms.net.HTTPNStream.flush(Unknown Source)
    at oracle.forms.net.HTTPNStream.getResponse(Unknown Source)
    at java.io.DataOutputStream.flush(Unkown Source)
    at oracle.forms.net.HTTPConnection.connet(Unknown Source)
    at oracle.forms.engine.FormsDispatcher.initConnection(Unknown Source)
    at oracle.forms.egnine.FormsDispatcher.init(Unknown Source)
    at oracle.forms.egnine.Runform.initConnection(Unknown Source)
    at oracle.forms.egnine.Runform.startRunform(Unknown Source)
    at oracle.forms.egnine.Main.createRunform(Unknown Source)
    at oracle.forms.egnine.Main.start(Unknown Source)
    at sun.applet.AppletPanel.run(Unknown Source)
    at java.lang.Thread.run(Unknown Source)
    please help out to resolve this issue.
    Regards,
    Fahd

    Hi;
    XP is not certified platform. Similar issue mention here many times.Please see:
    Recommended Browsers for Oracle E-Business Suite Release 12 [ID 389422.1]
    FRM-92101: There Was a Failure in the Forms Server During Startup After Fresh R12 Installation [ID 429627.1]
    R12 fresh install FORMS DO NOT LAUNCH - FRM-92101/500 [ID 427714.1]
    FRM-92101: Forms Server oracle.forms.net.ConnectionException: Forms session <1> failed during startup: no response from runtime process [ID 880088.1]
    Forms: 9.x and 10.x: Troubleshooting FRM-92050, FRM-921xx [ID 189867.1]
    Known Causes of FRM-92101 Error In Forms [ID 604633.1]
    Also check:
    http://onlineappsdba.com/index.php/2009/06/15/frm-92101-with-internet-explorer-8-how-to-uninstall-ie8/
    Re: R12 database and JRE Issue
    FRM-92101 There was a failure in the forms server during startup
    Regard
    Helios

  • FRM-92101 there was a failure in form server during startup

    we are using R12, All the instance started successfully, but when i get in to the form server in application side the error comes like FRM-92101 there was a failure in form server during startup. this could happen due to invalid configuration. please look into web server log for details ,
    it comes for all the three instances in this particular server , so what is the problem , and where is the web log server present ,
    please give solutions ,
    Thanks
    Edited by: user12235518 on Mar 3, 2012 11:54 PM

    12/03/06 05:24:57.339 formsweb: Forms session <3> aborted: runtime process failed during startup with errors /R12/d01/oracle/R12I/apps/tech_st/10.1.2/bin/frmweb: error
    while loading shared libraries: libXm.so.2: cannot open shared object file: No such file or directory
    12/03/06 05:24:57.339 formsweb: Forms session <3> exception stack trace:
    oracle.forms.engine.RunformException: Forms session <3> failed during startup: no response from runtime process
    at oracle.forms.servlet.RunformProcess.connect(Unknown Source)
    at oracle.forms.servlet.RunformProcess.dataToRunform(Unknown Source)
    at oracle.forms.servlet.RunformSession.dataToRunform(Unknown Source)
    at oracle.forms.servlet.ListenerServlet.doPost(Unknown Source)
    at javax.servlet.http.HttpServlet.service(HttpServlet.java:763)
    at javax.servlet.http.HttpServlet.service(HttpServlet.java:856)
    at com.evermind[Oracle Containers for J2EE 10g (10.1.3.4.0) ].server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:713)
    at com.evermind[Oracle Containers for J2EE 10g (10.1.3.4.0) ].server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:370)
    at com.evermind[Oracle Containers for J2EE 10g (10.1.3.4.0) ].server.http.HttpRequestHandler.doProcessRequest(HttpRequestHandler.java:871)
    at com.evermind[Oracle Containers for J2EE 10g (10.1.3.4.0) ].server.http.HttpRequestHandler.processRequest(HttpRequestHandler.java:453)
    This error s coming for both new instance and cloned instance
    Edited by: user12235518 on Mar 6, 2012 4:17 AM

  • R12: "FRM-92101:There was a failure in the Forms Server during startup"

    LINUX VERSION:
    [oracle@USSLTC3118V StageR12]$ cat /etc/*-release
    Red Hat Enterprise Linux Server release 5.4 (Tikanga)
    LOGS:
    $/ebs/oracle/VIS/inst/apps/VIS_ussltc3118v/logs/ora/10.1.3/j2ee/forms/forms_default_group_1/application.log:
    12/06/07 08:55:15.661 formsweb: Forms session <11> aborted: unable to communicate with runtime process.
    12/06/07 08:55:15.663 formsweb: Forms session <11> exception stack trace:
    java.lang.StringIndexOutOfBoundsException: String index out of range: -6
    at java.lang.String.substring(String.java:1938)
    at oracle.forms.servlet.RunformProcess.connect(Unknown Source)
    at oracle.forms.servlet.RunformProcess.dataToRunform(Unknown Source)
    at oracle.forms.servlet.RunformSession.dataToRunform(Unknown Source)
    at oracle.forms.servlet.ListenerServlet.doPost(Unknown Source)
    at javax.servlet.http.HttpServlet.service(HttpServlet.java:763)
    at javax.servlet.http.HttpServlet.service(HttpServlet.java:856)
    at com.evermind[Oracle Containers for J2EE 10g (10.1.3.4.0) ].server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:713)
    at com.evermind[Oracle Containers for J2EE 10g (10.1.3.4.0) ].server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:370)
    at com.evermind[Oracle Containers for J2EE 10g (10.1.3.4.0) ].server.http.HttpRequestHandler.doProcessRequest(HttpRequestHandler.java:871)
    at com.evermind[Oracle Containers for J2EE 10g (10.1.3.4.0) ].server.http.HttpRequestHandler.processRequest(HttpRequestHandler.java:453)
    at com.evermind[Oracle Containers for J2EE 10g (10.1.3.4.0) ].server.http.AJPRequestHandler.run(AJPRequestHandler.java:313)
    at com.evermind[Oracle Containers for J2EE 10g (10.1.3.4.0) ].server.http.AJPRequestHandler.run(AJPRequestHandler.java:199)
    at oracle.oc4j.network.ServerSocketReadHandler$SafeRunnable.run(ServerSocketReadHandler.java:260)
    at com.evermind[Oracle Containers for J2EE 10g (10.1.3.4.0) ].util.ReleasableResourcePooledExecutor$MyWorker.run(ReleasableResourcePooledExecutor.java:303)
    at java.lang.Thread.run(Thread.java:619)
    12/06/07 10:02:25.980 formsweb: Forms session <12> aborted: unable to communicate with runtime process.
    12/06/07 10:02:25.980 formsweb: Forms session <12> exception stack trace:
    java.lang.StringIndexOutOfBoundsException: String index out of range: -6
    at java.lang.String.substring(String.java:1938)
    at oracle.forms.servlet.RunformProcess.connect(Unknown Source)
    at oracle.forms.servlet.RunformProcess.dataToRunform(Unknown Source)
    at oracle.forms.servlet.RunformSession.dataToRunform(Unknown Source)
    at oracle.forms.servlet.ListenerServlet.doPost(Unknown Source)
    at javax.servlet.http.HttpServlet.service(HttpServlet.java:763)
    at javax.servlet.http.HttpServlet.service(HttpServlet.java:856)
    at com.evermind[Oracle Containers for J2EE 10g (10.1.3.4.0) ].server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:713)
    at com.evermind[Oracle Containers for J2EE 10g (10.1.3.4.0) ].server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:370)
    at com.evermind[Oracle Containers for J2EE 10g (10.1.3.4.0) ].server.http.HttpRequestHandler.doProcessRequest(HttpRequestHandler.java:871)
    at com.evermind[Oracle Containers for J2EE 10g (10.1.3.4.0) ].server.http.HttpRequestHandler.processRequest(HttpRequestHandler.java:453)
    at com.evermind[Oracle Containers for J2EE 10g (10.1.3.4.0) ].server.http.AJPRequestHandler.run(AJPRequestHandler.java:313)
    at com.evermind[Oracle Containers for J2EE 10g (10.1.3.4.0) ].server.http.AJPRequestHandler.run(AJPRequestHandler.java:199)
    at oracle.oc4j.network.ServerSocketReadHandler$SafeRunnable.run(ServerSocketReadHandler.java:260)
    at com.evermind[Oracle Containers for J2EE 10g (10.1.3.4.0) ].util.ReleasableResourcePooledExecutor$MyWorker.run(ReleasableResourcePooledExecutor.java:303)
    at java.lang.Thread.run(Thread.java:619)
    [root@USSLTC3118V VIS]# cat ./inst/apps/VIS_ussltc3118v/logs/ora/10.1.3/opmn/forms_default_group_1/formsstd.out
    12/05/31 11:52:36 FormsServlet init():
    configFileName: /ebs/oracle/VIS/inst/apps/VIS_ussltc3118v/ora/10.1.2/forms/server/appsweb.cfg
    testMode: false
    12/05/31 11:52:36 Oracle Containers for J2EE 10g (10.1.3.4.0) initialized
    12/06/05 16:23:05 ListenerServlet init()
    12/06/05 16:23:09 Forms session <1> failed during startup: no response from runtime process
    12/06/05 16:23:32 Forms session <2> aborted: unable to communicate with runtime process.
    12/06/06 09:23:04 Forms session <3> aborted: unable to communicate with runtime process.
    12/06/06 10:48:47 Forms session <4> aborted: unable to communicate with runtime process.
    12/06/06 12:43:05 Forms session <5> aborted: unable to communicate with runtime process.
    12/06/06 19:48:33 Forms session <6> aborted: unable to communicate with runtime process.
    12/06/06 19:49:04 Forms session <7> aborted: unable to communicate with runtime process.
    12/06/07 08:43:26 Forms session <8> aborted: unable to communicate with runtime process.
    12/06/07 08:46:39 Forms session <9> aborted: unable to communicate with runtime process.
    12/06/07 08:52:56 Forms session <10> aborted: unable to communicate with runtime process.
    12/06/07 08:55:15 Forms session <11> aborted: unable to communicate with runtime process.
    12/06/07 10:02:25 Forms session <12> aborted: unable to communicate with runtime process.
    [root@USSLTC3118V VIS]#
    Solutions I Tried:
    REMOVE
    rpm -e openmotif21-2.1.30-11.EL5
    INSTALL
    rpm -i openmotif21-2.1.30-11.EL5.i386.rpm
    [root@USSLTC3118V lib]# make -f ins_forms.mk install
    ins_forms.mk:42: /forms/lib/env_forms.mk: No such file or directory
    ins_forms.mk:581: warning: overriding commands for target `-pure'
    ins_forms.mk:574: warning: ignoring old commands for target `-pure'
    ins_forms.mk:583: warning: overriding commands for target `-quantify'
    ins_forms.mk:576: warning: ignoring old commands for target `-quantify'
    ins_forms.mk:585: warning: overriding commands for target `-cov'
    ins_forms.mk:578: warning: ignoring old commands for target `-cov'
    ins_forms.mk:588: warning: overriding commands for target `-pure'
    ins_forms.mk:581: warning: ignoring old commands for target `-pure'
    ins_forms.mk:590: warning: overriding commands for target `-quantify'
    ins_forms.mk:583: warning: ignoring old commands for target `-quantify'
    ins_forms.mk:592: warning: overriding commands for target `-cov'
    ins_forms.mk:585: warning: ignoring old commands for target `-cov'
    ins_forms.mk:595: warning: overriding commands for target `-pure'
    ins_forms.mk:588: warning: ignoring old commands for target `-pure'
    ins_forms.mk:597: warning: overriding commands for target `-quantify'
    ins_forms.mk:590: warning: ignoring old commands for target `-quantify'
    ins_forms.mk:599: warning: overriding commands for target `-cov'
    ins_forms.mk:592: warning: ignoring old commands for target `-cov'
    make: *** No rule to make target `/forms/lib/env_forms.mk'. Stop.
    [root@USSLTC3118V lib]#
    Any insight as to what else shall I try?

    How do you get this error?
    Was this working before? If yes, any changes been done recently?
    Have you tried to run AutoConfig and see if it completes successfully?
    Please see these docs.
    R12: "FRM-92101: There Was a Failure in the Forms Server During Startup" Error When Executing EXECUTE_QUERY in Forms [ID 1111113.1]
    R12: "FRM-92101: There was failure in the Forms Server during startup" Error While Submitting Concurrent Requests [ID 867501.1]
    Users Receive FRM-92101 oracle.forms.net.ConnectionException Errors When Launching E-Business Suite Forms Responsibility and Function [ID 1258305.1]
    Forms are Erroring with FRM-92101:There was a failure in the forms server during start up. [ID 1433329.1]
    Thanks,
    Hussein

  • Oracle.forms.engine.RunformException: Forms session 1 failed during start

    Dears,
    I have newly installed APPS R12 on Windows 2003 (32-bit),I'm facing the below issue while using the web page to access any forms,
    oracle.forms.engine.RunformException: Forms session <3> failed during startup: no response from runtime process
    Khan

    Hi,
    I am unable to login into Oracle Apps.The address typed in the address bar is
    http://com1.edu:8000/dev60cgi/ifcgi60.exe
    The message I get is
    load:class oracle.forms.engine.Main not found and
    exception: com1.edu.
    Please give the solution in detail.
    Thanks in advance.
    Also wishing you all a Happy and Prosperous New Year
    Regards
    Shiva

  • Frm-92101 failed during stratup

    I have installed AS10g on window 2003 server, after applying configuration on default.env and formsweb.cfg.
    when i call my system the following error occured frm-92101 failed during startup
    details
    java exception:
    oracle.forms.net.connectionexception : forms session <1> failed during startup : no response from the runtime process
    at oracle.forms.net.connectionexception.createconnectionexception(unknown source)
    at oracle.forms.net.httpnstream.getresponse(unknown source)
    at oracle.forms.net.httpnstream.doflush(unknown source)
    at oracle.forms.net.httpnstream.flush(unknown source)
    at java.io.dataoutputstream.flush(unknown source)
    at oracle.forms.net.httpconnection.connect(unknown source)
    at oracle.forms.engine.formsdispatcher.initconnection(unknown source)
    at oracle.forms.engine.formsdispatcher.init(unknown source)
    at oracle.forms.engine.RUNFORM.initconnection(unknown source)
    at oracle.forms.engine.RUNFORM.startrunform(unknown source)
    at oracle.forms.engine.main.createrunform(unknown source)
    at oracle.forms.engine.main.start(unknown source)
    at sun.applet.appletpanel.run(unknown source)
    at java.lang.thread.run(unknown source)
    please if any one can guide in order to solve this error,i would like to add that i'm already running my system on AS 10g installed on window 2000 without infrastructure, but when i installed it on window server 2003 plus i installed infrastructure on another machine in window server 2003.

    Hi,
    1. This doesn't look like Application Server, but Developer Suite!
    2. For Developer Suite, you also need to start the OC4J Instance. Did you?
    3. You don't need the entries in PATH. The fmx and pll/plx only needs to be added to FORMS90_PATH
    4. This looks like an older version. Is it 9i (9.2.0.1) or 10g (9.0.4)?
    Regards,
    Martin

  • After 10.8.5 update on Mac Book Air; startup fails during spinning wheel

    The 10.8.5 update was applied and now startup fails during the spinning pinwheel. Initially the screen shows a Gray apple logo and an empty progress bar for a brief (1 sec). Then the spinning pinwheel appears for a few seconds and everything shuts down. I have tried resetting the PRAM, booting from an external drive which allows me to run disk utilites but no help.
    Any ideas.

    Shut down your Mac.
    Wait about then seconds then restart your Mac while holding down the Command + R keys.
    From there you should be able to access the built in utilities to repair the disk and restore OS X using OS X Recovery

  • During startup the apple becomes a fragmented apple, what is about to fail?

    During startup the apple becomes a fragmented apple, what is about to fail?

    Gomtomsyetm preferencs and make sure that you HDD is selected as the start up disk. Then start up using your install disc and run disk utility and repair the drive just in case something has gotten corrupt.

  • During startup my ipod is taking forever to connect to my wifi network. I have the corrct key and everything. Any help?

    During startup my ipod is taking forever to connect to my wifi network. I have the corrct key and everything. Any help?

    Your model MB528LL ipod is a 2G and can only go as high as iOS 4.2.1. many apps now require 4.3 or later.
    You said "will not use the WiFi connection that I have looged on to it continues to tell me that it can't use anything without a secure connection."
    Just what are you doing when you get that message and what is the exact wording of the error message?

Maybe you are looking for

  • Mapping error while downloading the condition records (ECC to CRM)

    Hello Experts, We were downloading the condition records from ECC to CRM system (Production), but due to Mapping error, it was unsuccessful, i wonder what's going wrong there. When i see in SMQ2 (CRM Inbound Queue), an queue got stucked there, i.e, R

  • Creating new DB in existing ASM

    Hi, I've 2 nodes where 11g grid is installed and 2 database are already running in existing ASM. For ASM and 2 database we are using same listener configured in default port running from one db home. Now, I'm installing the third Database where liste

  • Dreamweaver 8 & Mac OS 10.5 (Leopard)

    I upgraded from mac OS 10.4 to 10.5 Leopard and encountered various troubles on the sites created with Dreamweaver 8 (version 8.0.2). 1/ for all sites, I got the following message : "The local root file does not exist. Please select a new local root

  • Force a user event

    Hi, In a point of my vi I want to force a user event in order to enter in an event case in run time. I want to simulate an event over a multicolumn listbox, for example, Double Click. How can I do it? Some example? I am working with Create user event

  • General question about Extraction

    Hi guys,   Please bear with my very preliminary question, but I just wanna set my assumptions straight.   Now, when we talk about extracting data from SAP R/3, do we have to use CO-PA and LO extraction ?   In my scenario, we intend to pull data from