Mute on netbook is not recognized

I have a Mini 210-2050NR.  Lately when I have it muted, sound will start coming through the speakers anyway (if I'm on a website or something that has sound to it).  Sometimes it will just come in short clips, and sometimes it will just play as though I don't have mute selected.

Did you restart your mac and reset your iphone already? If yes, make sure Apple Mobile Device Service is installed. http://support.apple.com/kb/HT1747
If still no luck, try to connect in recovery mode: http://support.apple.com/kb/HT1808

Similar Messages

  • [SOLVED]Hard Disk not recognized when installing

    Hey all, I'm just starting with Arch and I've had some trouble installing it on my Acer netbook.
    My first installation went well except that I had forgot to download the wireless tools so I decided to do a fresh install as I had no access to a wired connection at the time.  The second installation attempt must have had some error on my part as Arch failed to start after selecting it from Grub, saying that the kernel was not available/not recognized.
    Now my subsequent attempts at installing have failed because the hard disk is not recognized when running either cgdisk or cfdisk.  Instead of showing my hard drive partitions after running
    cfdisk /dev/sda
    it shows my usb drive. If I instead use
    cgdisk /dev/sda
    it displays an error saying that the disk is damaged or not recognized.  When I first saw this I thought my disk was failing, so I tried #! to see if it would show the same error, but it was able to recognize the entire disk and install correctly.  Now, even after having the entire disk formatted as ext4 with #! installed, cgdisk is still giving me the same error about a damaged disk.
    Am I doing something incorrectly or is there a fix for this?  I haven't been able to find any information about this after a good while of searching.
    Thanks for your help.
    Last edited by Forest_Leaves (2013-03-05 08:30:24)

    srs5694 wrote:The cgdisk "damaged disk" error is probably a result of the tool seeing an MBR partition table on your USB flash drive, rather than the GPT disk it's expecting. If I'm right, you should not follow s1ln7m4s7r's advice, since that will simply trash your USB flash drive!
    If you mean by trashing the USB flash drive, that it will delete all data and partitions on the selected drive it is correct, because:
    dd if=/dev/zero of=/dev/$disk bs=4096 count=1
    - this will delete all partition-table data
    sgdisk -o /dev/$disk
    - this will clear out all data. This includes GPT header data, all partition definitions, and the protective MBR.
    /dev/$disk
    - this will make you enter ncurses-based GUID partition table (GPT) manipulator, where you can create new partitions
    You should only do this if you are certain of what disk it is.
    Now if when you said this, you were meaning it will became broken, then it may be a special kind of usb drive because i've donne it many times and i've not broken any.
    srs5694 wrote:My guess is that either your hard disk has become /dev/sdb (this can happen in some cases; disk identifiers aren't really fixed) or you're missing a driver for your hard disk controller because you've booted a different kernel or a different initrd file. Another possibility is that there's a hardware fault -- probably a loose cable -- that's preventing the kernel from seeing the disk.
    If the usb drive is not where you installed arch, then you need to find if there are more recognized drives:
    lsblk | grep disk
    And see the uuid of the root partition you want, and add it to your bootloader boot line:
    blkid /dev/sdxx
    Last edited by s1ln7m4s7r (2013-03-04 19:17:36)

  • Yeti USB mic not recognized

    Hi, I'm new on this stuff
    well today I bought the Yeti USB microphone but it seems that is not working and is not recognized by any usb port on my iMac
    I did just as the manual said and I quote it:
    "1. Plug the microphone into your computer’s USB port using the provided USB cable.
    2. From the main Apple menu, select the “System Preferences.”
    3. Select the “Sound” icon.
    4. Now select the input tab and select “Yeti Stereo Microphone.” "
    When I plug the mic the mute button turns on like for a second and then its off
    also the Yeti Stereo Microphone does not appears...
    I would thank you if anyone could help me out

    If you have followed the directions exactly, it may be that the unit is defective.  Return it and try another one.
    Let us know how you make out,

  • [Solved] After update, media keys not recognized.

    After I updated today, my play, stop, forward and back keys work, but not recognized in xbindkeys -mk. My vol up, down and mute do not work and are not recognized. I also cannot ctrl+alt+backspace to restart x.
    Last edited by haxit (2009-05-02 15:26:49)

    Acecero wrote:
    haxit wrote:I also cannot ctrl+alt+backspace to restart x.
    Add this
    Option "DontZap" "false"
    to the "ServerFlags" Section in the xorg.conf file.
    Zapping has been disabled by default with xorg-server 1.6
    Thanks a lot.

  • S205 w/ Windows Home Premium not recognizing Integrated WebCam - Windows 7 Drivers?

    I just got an awesome deal on an S205 netbook. Everything is great except that I cannot get the WebCam to work. This is a deal breaker. If I can't figure it out I'll be returning it.
    So far I have tried various things. When I first started this I couldn't figure things out. There was no camera in the Device Manager and nothing obvious on the system (hardware, software) about a camera, except that I can see it, physically on the netbook and know it came with a WebCam. How to use it? Nada. So I went to the Lenovo site & installed a driver and then Skype. The microphone works in Skype, but no picture. Totally black. However, it automatically brings up Lenovo YouCam when you test the video in Skype. So that helped as this software was not recognizing a camera either, so I knew it wasn't just Skype.
    Then I figured out that I needed to hit Fn+Esc to enable the webcam. I thought that was the ticket. However, as soon as I did that I got a message that the USB device was not recognized. I uninstalled the driver and went back to reinstall it to see if that might help, however at this time I realized that the driver's on Lenovo's site for the s205 are for XP not Windows 7. Seriously? Turns out there are two different sites. http://support.lenovo.com and http://consumersupport.lenovo.com The later has the Windows 7 version, the first site lists Xp drivers ... Installed the W7 Driver again, but still not working or recognizing the camera ... Anyway, I am not a techie, but I am pretty decent at figuring stuff out or Googling and researching this stuff online. Or following your directions/suggestions. From my searching so far no one seems to have this exact issue. Most it is either not having software to use the camera or not having it enabled and neither of these are my issue. Any ideas for what my next step should be? Details on my system below. Thanks!
    Lenonvo ideaPad - 11.6" 1366x768 LED; AMD Dual-Core E-350 1.6GHz; 4GB RAM; 500GB HDD; 802.11n; Windows 7 Home Premium; ATI Radeon HD6310M graphics; webcam; 6-cell battery
    Solved!
    Go to Solution.

    I've had some webcam issues, too.
    Sadly, the webcam device ID is not listed in the driver available for download at the support page.
    Thus, installing this driver is pointless.
    Nevertheless, you can force the driver installation and it will work as it should.
    Please have a look at the device manager.
    Double-click the unknown device, go to Details and select the Hardware ID property.
    It should be USB\VID_5986&PID_0292&REV_1403&MI_00
    (In case you got a different VendorID/ProductID, google them. You should quickly find something. Be sure this device is the webcam and not some other device. Otherwise don't continue.)
    Now unpack the driver setup file with 7-zip or WinRaR.
    Back to the Device Manager -> Double-click the device, select the Driver tab, click Update Driver and browse for the extracted folder. You will need the Bison subfolder.
    Good luck.

  • USB Device for IPOD not recognized by Windows, whether ipod connected or no

    During the past few days I have received a pop up error message from (I would think) Windows that the USB device is not recognized. I have the USB plug for the ipod connected (as always)but the ipod isn't even connected. It keeps popping up like every few seconds that the usb device is not recognized.
    When I attach the ipod itself, the ipod is recognizing it because it powers up. But, it took 10 times just to get the ipod to recognize through itunes. It updated, then immediately upon completion, windows again starting giving repeated error messages that the usb device wasn't recognized.
    I have downloaded the newest itunes but I had it on my system for 4 days with no problems whatsoever. I don't think that's it. No other system changes.
    I've deleted my temp files and cache. Also did a "disk clean up" and "defrag." It's still doing it.
    Any suggestions?

    I'm having the same problem. Ever since I upgraded to version 7, iTunes & my PC no longer recognise my iPod, and it therefore won't sync.
    It's not the USB port (other devices work in it), I rebooted my iPod and re-installed iTunes, I've tried stopping and starting the iPod Service (but can't see my iPod in My Computer). When I run the Diagnostics it says iPod connection failed. I've even bought a new USB cable but that doesn't work either.
    This is driving me up the wall. Is there a glitch with iTunes 7?
    Can anyone help me out?? Thanks
      Windows XP  

  • Aio Remote: PDFs not recognized by Google drive.

    Aio Remote on iPad Air2 iOS 8.1.1 - I created a PDF on my iPad from my HP Envy 7640 using Aio remote app. In the files/document section it's there (3 pages) as a PDF. But when I upload a copy from Aio Remote to Google Drive it's not recognized by Google Drive as a PDF even though it has a PDF extention. I have other PDF files stored in Google drive that are perfectly fine. It must be something in your app that is the problem.

    More info: if I send it from Aio remote as an email attachment to myself I get a PDF that I can upload to Google drive and Google drive reconizes it as a PDF. again proving it is Aio remote that is doing some thing wrong when uploading to Google Drive.

  • I recently upgraded to ios7 and now my PC is not recognizing my iphone

    I am having several problems.  I recently upgraded to ios7 and now my PC (Windows 7) is not recognizing my iphone.  1) I am getting an error message when itunes opens: "Itunes could not connect to the iphone because it is locked with a passcode. You must enter your passcode on the iphone before it can be used with itunes."  How did it get locked and how do I unlock it without losing my data?  What do they mean by passcode?  I don't have a 4-number code to get into my iphone activated.  In fact, I've never had a passcode.
    2) I cannot download my photos from my iphone onto my computer because my computer doesn't recognize my iphone.  In other words, my iphone does not show up on my computer (no iphone icon, no DCIM folder). 
    3) This is a separate issue but it is also very confusing: I went online to check my iCloud and I cannot see any data (icloud.com).  But I know that I set up iCloud when I upgraded to ios7 and it backs up my data every night. What am I doing wrong, am I unable to see my data and photos?
    Why is this happening?  It was bad enough that when I upgraded to ios7, I lost my Notes - I have no idea why they didn't return.  But now essentially my iphone is not recognized when connected to my computer and this is very frustrating.  I have read numerous previous postings regarding downloading photos onto the PC and regarding this passcode error and cannot find a resolution, so I would appreciate any help.

    No problem!
    This will make it easy for you:
    http://www.tuaw.com/2011/07/09/quicken-wont-run-on-lion-heres-10-mac-apps-to-cur e-those-blue/

  • I an getting an error with photo merge in PS cc . It gives me a code tmp00000001 using from photoshop and if I try from bridge it tell me that I need to select more than one image. It is not recognizing the photos I am selecting in bridge. please help. my

    A new problem with CS5 forced me to download PScc but the problem is still there.  I am getting tmp00000001 in photo merge when importing multiple files from inside PS and if trying from bridge I am getting a pop up box telling me I need to select more than 1 file. Photoshop potomerge is not recognizing my selections from bridge..!! please help.. my knowledge of computers is a 3 on a scale of 1-10

    if i run this particular code
    ( SELECT
    AccountDetails.CUSTOMERNUMBER, AccountDetails.ACCOUNTNUMBER, CUSTOMERDETAILS.CDTITLE, CUSTOMERDETAILS.CDFIRSTNAME, CUSTOMERDETAILS.CDLASTNAME, AccountDetails.ACCOUNTTYPE,
    AccountDetails.ORIGINALCONTRACTENDDATE, AccountDetails.CONTRACTTERM, AccountDetails.CONTRACTENDDATE, AccountDetails.BRANCHAREA, AccountDetails.PRODUCTTYPE,
    AccountDetails.HOUSEBANKACCOUNT, AccountDetails.CARMODEL, AccountDetails.CARLICENCE, AccountDetails.ARREARSBALANCE, AccountDetails.CODEBTOR, AccountDetails.GUARANTORNUMBER
    FROM AccountDetails
    JOIN CUSTOMERDETAILS ON AccountDetails.CUSTOMERNUMBER = CUSTOMERDETAILS.CUSTOMERS1
    WHERE EXISTS
    ( SELECT *
    FROM Dcaaccountallocation
    JOIN DebtEpisodes ON DebtEpisodes.ACCOUNTID = Dcaaccountallocation.ACCOUNTID
    WHERE Dcaaccountallocation.dcaid = 41
    AND Dcaaccountallocation.status = 2
    AND DebtEpisodes.DCASentDate IS NULL
    AND Dcaaccountallocation.ACCOUNTID = AccountDetails.ACCOUNTNUMBER
    AND DebtEpisodes.DCAORLAWYER = 'DCA'
    This returns 1 row of data
    However if i run a small part of the above code...
    SELECT *
    FROM Dcaaccountallocation
    JOIN DebtEpisodes ON DebtEpisodes.ACCOUNTID = Dcaaccountallocation.ACCOUNTID
    WHERE Dcaaccountallocation.dcaid = 41
    AND Dcaaccountallocation.status = 2
    It returns a lot of rows with a status of 2
    Now i presume what I am going to do is to ensure that all the fields provide satisfactory requirements, with regards to the above code. Although I have many records in all the stated tables already.
    :(

  • IPod nano does not charge & is not recognized by computer or iTunes

    I have a 1st generation nano 1 GIG.
    It appears "dead."
    It is not recognized by My Computer, iTunes or the Ipod Updater (The updater asks that I connect the iPod, which I do). The iPod diagnostics through iTunes also reports that my iPod is not connected.
    I have tried my iPod on 4 different machines, with one of them having USB 2.0.
    I tried the following from Jeff Bryan. (I don't know if the links from his post have carried over into this post.) So I will list the things I have tried near the end of this post.
    - My iPod won't turn on.
    - iPod battery doesn't charge.
    - iTunes 7 doesn't recognize the iPod.
    - Your Windows PC doesn't recognize iPod.
    - iPod appears in Windows Explorer but does not appear in iTunes.
    - iPod does not appear in iTunes.
    - Fast user switching in Windows XP is not supported.
    I tried resetting my iPod by switching the Hold button on and off and then pressing Menu and the Select button for 6-10 seconds. I have done this over and over and over.
    I have uninstalled the latest iTunes, reboot, reinstall - same problem.
    I have stopped the iPod service, plugged in the iPod, but it isn't recognized by My Computer as stated in the Apple Do-It-Yourself Help. I launched iTunes - same problem.
    I used the window cleanup utility, reboot, reinstall iTunes, connect iPod - same problem.
    I have used the Windows ipconfig utility to change my boot parameters, but still nothing.
    If anyone has any ideas, I would greatly appreciate them.
    My iPod is just shy of 6 months.
    I do have a replacement contract with Best Buy - but I would like to cover all the bases before I succumb to defeat.
    Thanks
    XP Home with USB 1.1   Windows XP   4 machines, all XP, 2 XP Pro, 2 XP Home, 3 have USB 1.1, 1 has USB 2.0, 2 machines have latest iTune

    I'm having the same problem, my ipodnano is about a year old and I can't figure out what to do. I just installed the new itunes on my new laptop with vista premium. I'm desperate for a resolution, do you have any suggestions at all. Any help is greatly appreciated. Thank you

  • Iphone not recognized by windows or itunes

    Can anyone please help me figure out how to resolve this issue?  My iphone 4 is not recognized by my PC.  My OS is by Vista Home Premium Service Pack 2.  I tried the various "device not recognized" troubleshooting to no avail.  I tunes is up to date.  I even turned off my security sw for a bit to see if there was a third party conflict...all to no avail.  There has got to be someone out there who has the smarts to show me how to fix this.  Please advise and many thanks in advance!

    Jason,
    I understand why Apple doesn't cover the water damaged phones under the warranty, but do you know why they don't fix them if the customer is paying? Is it just because they want the people to buy another phone so they can make more money? I guess I just don't get it.
    The cost to repair a device and all of its components is more than the cost of a new device.
    Other than the article I linked above, this is the part of the warranty/legal forms that would apply:
    +"US v1.0+
    +Apple reserves the right to refuse+
    +service on products that have serial numbers altered, defaced or removed or that are damaged due to+
    +accident, abuse, neglect, misuse (including faulty installation, repair, or maintenance by anyone other+
    +than Apple or an Apple Authorized Service Provider), unauthorized modification, extreme environment+
    +(including extreme temperature or humidity), extreme physical or electrical stress or interference,+
    +fluctuation or surges of electrical power, lightning, static electricity, fire, acts of God or other external+
    +causes. In such event, Apple may return the product to you without servicing it, and may charge you the+
    +Diagnostic Fee."+ from http://images.apple.com/legal/terms/repair/docs/070108aiphoneOOW.pdf
    -Jason

  • 5th Gen Ipod not recognized by windows or itunes. Have tried it all. Any Ideas?

    Hello everyone. I have a 5th generation Ipod I recently purchased that I'm having what seems to be an common issue. When I connect the ipod to my computer via USB, the Ipod is not recognized in windows or Itunes. Occasionally the Ipod will charge when connected but not always. Though this is the same for the old wire I used and the new one I purchased today. Even when shown charging the Ipod is not recognized and there is no noise that a device has been connected. I have tried the 4 R's (without Restore) which I can't do, chaninging the drive letter, disabling start up software,uninstalling and reinstalling all Apple Software. I have tried connecting to another computer and have gotten the same result. When I check the diagnostic screen on the ipod it shows that a usb cable is detected. I have upgraded all my driver software, disabled and reenabled them. I'm almost 3 hours from the nearest store so that it out of the question. I'm curious if anyone has any other ideas and will try anything you think might be the issue and fix. Thank you for time.

    From my experience, the only way you're gonna get a PC afflicted with this disease to work with a 5th gen nano is to roll back to an earlier version of iTunes.  Those affected have been exhausted by this ongoing issue.  To update or not to update?  And I always say never update unless you have to, and turn off all that auto update mess!
    I have two core2duo lappies running 32b vista.  My workflow dictates 32b fyi.  One is acer aspire running itunes v 11.1 (.0.126),  5th gen nano was originally formatted and works just fine on this machine to this day.  My other is the bigger badder lenovo thinkpad and the 5th gen will NOT mount using any version of itunes past 11.0 (.1.12)  Windows mounts it just fine.  itunes is not having it.  no shirt no shoes no service.
    I have both a 4th and 5th gen nano.  The 4th gen works great on both machines, I even successfully tested it with the latest version (11.1.5) before subsequent deletion on the thinkpad!  Weird huh?  I think my next experiment might be to restore my 5th gen w/ a Mac and theeeeen plug it into PC itunez.
    I'm at a loss on the thinkpad.  Scanned for intruders.  Cut the Lenovo bloat.  Executed system and reg maintenance.  Took down msconfig to a safe mode + itunes level to attempt to resolve possible sw conflicts but to no avail.  NO NO NO.  Every single dang port, every time on the thinkpad.  Has me feeling like others might get the same treatment by the next itunes update.  :|
    So in summary for me:
    5th gen nano and thinkpad are a NoGo on 11.1^  last working version for me = 11.0.1
    5th gen nano is working on an acer aspire 11.1.0  but no way in the world am I updating
    4th gen nano is kicking 5th gen nano's @zz so what would make me want to buy a new ipod?

  • How to reformat Ipod Nano 5th gen when not recognized by Windows or iTunes?

    I've done all the steps on the site to correct this problem up until the reformatiing part except I tried to update the driver software but Windows says that it encounters an error when trying to install the new software.
    So after going through the steps I noticed that the iPod I just bought was formatted for Mac. It says that in order for me to reformat, I have to restore my iPod in iTunes but since it isn't recognized my my computer or iTunes, I can't do it.
    Suggestions anyone?

    Hello there, HateKnuckle.
    The following Knowledge Base article offers a pretty thorough step-by-step for troubleshooting your issue:
    iPod not recognized in My Computer and in iTunes for Windows
    http://support.apple.com/kb/TS1369
    Thanks for reaching out to Apple Support Communities.
    Cheers,
    Pedro.

  • IPod Shuffle Not Recognized In Windows Or iTunes v7.0 - What Now?

    Hello everyone,
    I am having the same problem as many who have posted here. I have upgraded my software to iTunes v7.0.1.8. I also accepted the auto update for my iPod Shuffle - 512GB 1st Gen to v 1.44 (I believe). Of course, now my Shuffle is not recognized in iTunes and is only recognized in Windows for less than 5 seconds (as I have monitored it). I am listing below all of the actions I have taken today.
    As none of these have worked, my question is now what? Does anyone have any other suggestions before I take the dreaded step of calling support? Any help is appreciated.
    I am not happy with this upgrade issue at all. I expect much better from Apple.
    Steps Already Taken:
    1. Reset iPod.
    2. Set Terminal Services to "Manual" and restarted my laptop PC.
    3. Changed all USB Root Hub entries power management options to "Allow the computer to turn off this device to save power option" and rebooted.
    4. Assigned my external hard drive a different letter as it was assigned to "E" and tech support documentation suggested I changed it - I changed it to "M".
    5. I stopped the iPod Service via the Services and Application interface from My Computer/Manage, reattached the Shuffle, and started the iPod Service. The Shuffle was still not recognized.
    6. I uninstalled iTunes 7.0.1.8, the Apple Software update and QuickTime. I deleted all temp directories; program files folders and all possible traces of all three pieces of this software. I also deleted my iTunes library. I reinstalled all of this software and re-built my Library. NONE OF THIS WORKED!
    My 30GB Video iPod works fine and always has - it is only the shuffle for which I have this issue any only since the upgrade.
    What do I do now? If no one has another fix, I will be forced to call Tech Support after an experience with them over a year ago I would almost rather throw this thing away!

    qswh - I too cannot play the songs that are loaded on the shuffle. Additionally, I get a green & orange light when I plug it into a USB port and then I either get a blinking orange light or a solid orange light from there after.

  • Ipod touch not recognized by computer or ITunes

    Ipod touch is not recognized by computer or Itunes. Tried it on Windows XP OS and also Windows 7. Error message OxE8000068, unknown error, appears. Thanks for any help!

    Try here:
    iPhone, iPad, iPod touch: Unknown error containing '0xE' when connecting

Maybe you are looking for