Mute the input monitor while recording? Should be easy, right?

First off, here's an illustration of what I'm doing:
http://www.thesoundofmachines.com/re-amp-image.jpg
I'm sending an already recorded guitar take through a cigar-box amp, then re-recording it back into a new track in the logic session at the same time.
I did search the forums & the user manual. I must be loosing it. How do I mute the input signal while it's being recorded? I need the input to be recorded, but not monitored. Otherwise, I'm drowning in a terrible feedback loop.
I turned off "software monitoring" to no avail. What am I missing?
Thanks in advance...
-Should Know This Stuff

Heya- take a look at this:
http://www.thesoundofmachines.com/re-amp-image.jpg
You can see it's just a little Edirol USB interface.
http://www.roland.com/products/en/UA-1A/index.html
I know! I need better! I just don't have extra money at the moment.
So any tips or suggestions? (other than "buy a new interface...")
Thanks!

Similar Messages

  • Disable input monitor while record enabled?

    i just got an m-audio profire 2626 interface that I'm using to do my monitoring through, so i no longer want logic to monitor each track because it creates a weird double monitoring phaser thing. I thought that i disabled the monitoring by clicking the little "I" button next to the record enable, but as soon as i enable the track for recording it starts the monitoring again, is there away for me to disable monitoring when the track is enabled for recording?

    If you are monitoing using direct monitoring on your interface, you should disable "Software Monitoring" in the audio drivers preferences. Now Logic will not monitor signals through the mixer at all, leaving it up to your audio interface.

  • How to fix the delay problem while recording? Can't set the Latency to 0. Win7, CS6,Realtek,C03u Mic

    I am using Win7, with CS6, Realtek soundcard and Samson C03U microphone.
    There is a problem that's really been bothering me. When I record songs the recorded audio always comes 0.1 seconds after where it's supposed to be and I need to fix the problem every time. How to fix the delay problem while recording? I can't set the Latency to zero. The minimum is 30ms and I still get an obvious delay.
    I saw some previous discussions saying that installing ASIO would help. Is it gonna work on my PC?
    Thank you in advance guys.

    You probably should look at a more 'serious' audio interface rather than the Realtek
    Yes ASIO drivers are the way to go
    If you want zero latency you need to monitor via your audio hardware (hence the 'serious' audio interface suggestion)
    There are a heap of reasonable audio interfaces which will do the job for you that are pretty inexpensive and I'm sure that someone will jump in with a suggestion

  • In JDBC Sender Adapter , the server is Microsoft SQL .I need to pass current date as the input column while Executing stored procedure, which will get me 10 Output Columns. Kindly suggest me the SQL Query String

    In JDBC Sender Adapter , the server is Microsoft SQL .I need to pass current date as the input column while Executing stored procedure, which will get me 10 Output Columns. Kindly suggest me the SQL Query String , for executing the Stored Procedure with Current date as the input .

    Hi Srinath,
    The below blog might be useful
    http://scn.sap.com/community/pi-and-soa-middleware/blog/2013/03/06/executing-stored-procedure-from-sender-adapter-in-sap-pi-71
    PI/XI: Sender JDBC adapter for Oracle stored procedures in 5 days
    regards,
    Harish

  • I'm getting a random beep sound when I hit the input button to record a turntable

    I'm getting a random beep sound when I hit the input button to record a turntable & mixer plugged into the mbox thats bleeding into the recording. How can I stop this? Please help me. It's happening if I'm recording or not, as soon as I hit the (I) input it beeps randomly.

    Thanks Jim,
    Seems to be this song. Other projects don't have this issue.
    I even took and opened the project on another computer, bounced it again and got the same "click" at the same 13 second area.
    I've bounced each track solo, listened and NO click at the 13 sec. mark
    No third party plug-ins.
    The click doesn't land close to any beginning or end of a region.
    Final mix down looks good, no peaking over 0db.
    This is making me nuts!

  • Can I mute the microphone during video recording

    I am trying to take video of a real estate property and I do not need to collect the audio - in fact I do not want any audio captured - can I mute the micrphone while taking vido?
    Thanks
    Ray

    Not with the stock Camera app.  Camera Plus allows you to turn off audio.  Other camera apps probably do as well.

  • How do you CONCURRENTLY monitor while recording a voice track?

    I want to use Garageband for recording hypnosis sessions. I connect a Plantronics USB Mic headset to the computer and record into that (and can hear through it too), but want ALSO for a client to be able to hear through a SEPARATE set of headphones - plugged into the headphone jack (or somehow).
    Problem is that the headphone jack of the MAC is disabled by the use of the other USB headphone being used for the recording/monitoring.
    How can I get this to work? People MUST be doing this.
    Thank you!
    Martin
    Intel iMac 20"   Mac OS X (10.4.8)  

    You can't do it the way you want to, GB supports a single output device only.
    You'd have to use this Headphone Splitterplugged into the headphone jack on the Mac.

  • Monitor while recording stops after a few measures

    When recording,my monitor stops after a few measures,even tho it's still recording,including sounds made from my guitar.
    I'm recording using a Griffin iMic
    Headphones are connected to my speakers
    Any help his highly appreciated-Thanx!
    macmini   Mac OS X (10.3.9)  

    I've seen this issue in the past.  I think it is connected to the operating system itself.  I say this because I reinstalled the os using itunes and then restored a backup.  Then garageband started behaving again.  Then the issue came back - after I did an os update.  So I'd try reverting back to a fresh version of the latest os, and then restoring your apps using a backup.
    Hope it helps
    @zorin

  • My recorded audio came out "broken" than when i was monitoring while recording an audio

    Im using a focusrite scarlett 2i2 as audio interface, an old Yahama MG102c mixer.They worked fine during the past few days but recently my recorded audio turns out distorted and full of static which is way different then when i was monitoring it. The recordings sounded perfect this past few days but suddenly it produces these kinds of annoying extra sounds. Is there a problem with my equipment or is there a problem with the program itself? Any chance of repairing the audio file and fixing the problem itself? any help is appreciated. Thank you! If you dont get what i mean i can send you a sample. Just email me here [email protected]

    Anything here help?
    iMovie: Improving audio and video synchronization
    http://support.apple.com/kb/TA25603?viewlocale=en_US

  • Can I deal with the audio stream while recording?How?

    Hi, All,
    I am doing a project about SIP phone using J2ME. I am quite new to this area. I want to mask the audio stream before it sends out. I want to know if it can be achieved in J2Me. if yes, would you give me some reference? Thanks for any reply.

    Is anyone who knows how to achieve this？

  • How do I turn the metronome off while recording and playing back?

    It's quite annoying ... And I am a newbie.

    Use the spanner/wrench tool to set options. You can disable it altogether, use it for count ins only, or even change the tone/instrument.
    tt2

  • HT2471 MacBook air is not connecting with my Thunderbolt monitor...should be easy fix but i cannot figure out

    I have been using my MacBook Air with Thunderbolt monitor for a few months with no problems...  Now I connected my laptop to my monitor and I am not getting a connection.   Please help

    It's possible that the W2 you used was set up with the EchoSign service. It allows you to draw a signature with a mouse. This is available as well with more recent versions of Reader (10.1+) if the form isn't Reader-enabled or secured. You will see this in the Sign panel when the document is opened in Reader.
    You can otherwise get an EchoSign account and upload your document and send it to your customers through the EchoSign service. You can establish a free account to see how it works.

  • I just go the latest version of iTunes and I got a large number of old unwanted files "in the cloud" that I cannot delete unless I load all all of them, which should take a few days. Is this a bug in the latest version? I should never upgrade right away;

    How do I delete podcasts files that now appear in the cloud when using the latest ITune version?

    Most likely you have Office 2004 which are PPC-only applications and will not work in Lion. Upgrade to Office 2011. Other alternatives are:
    Apple's iWork suite (Pages, Numbers, and Keynote.)
    Open Office (Office 2007-like suite compatible with OS X.)
    NeoOffice (similar to Open Office.)
    LibreOffice (a new direction for the Open Office suite.)

  • Polymorphism -- This should be easy right --- or am I missing somthing obvi

    Hello from sunny Wales,
    I thought the polymorphic capabilities of Java would allow this. Am I doing something wrong.
    For the example below assume that value and value2 are strings representing some value be it a decimal (Double) or a String. That we have already worked out what data type resides in the strings value and value2 as stored in the variable type.
    With this code my compiler is telling me that the operator >= cannot be used on Object x. I thought that this object would now be handled as a Double due to polymorphism.
    This is possible right?? or am I missing something really obvious?
    Code:
    =============================
    Object x;
    Object y;
    if ( type.equals("double"))
    x = new Double (value);
    y = new Double (value2);
    else (type.equals("String"))
    x = new String(value);
    y = new String(value2);
    boolean b = x >= y;================================
    Thanks
    Andrew.
    Message was edited by:
    scottie_uk

    Hello.
    This is possible right?? or am I missing something really obvious?It's not possible. You are missing a number of things.
    * Polymorphism means that you can call a method that is defined in a superclass or interface that is the declared type (e.g. Object) and the implementation of the actual type (e.g. Double, String) gets called. For example, Object has a toString(), which means you can call that method on an Object and whichever actual implemention gets called. It does not mean that the compiler would allow you to call a method on an Object variable that is not defined in class Object. Otherwise, you could call anything on anything.
    * Object does not define operator >=, and in fact Java does not support operator overloading. String has some operator support (not >= though) but that's it. Class Double also does not support any operators.
    * In Java 1.5 however, there is a feature called autoboxing which converts primitives (e.g. double) to wrappers (e.g. Double), and because of this conversion it effectively appears you can use operators on these wrapper types.
    Now, there is a way to accomplish what you want, by using interface Comparable. Both Double and String implement this interface.
    Comparable x;
    Comparable y;
    if ( type.equals("double"))
    x = new Double (value);
    y = new Double (value2);
    else if(type.equals("String"))
    x = new String(value);
    y = new String(value2);
    int diff = x.compareTo(y);
    boolean b = (diff >= 0);
    http://java.sun.com/j2se/1.5.0/docs/api/java/lang/Comparable.html
    Message was edited by:
    Loko

  • LogicX Rec Problem. I can't hear while recording no matter I turn on Auto Input Monitoring at menu or channel. On certain songs I could thru AUX to REC, my L7/8/9 procedure. Now, inconsistent, not work. Any help?

    Logic X Recording Problem
    I can't hear (ex.) voice back while recording no matter I turn on Auto Input Monitoring at Record Menu or Channel Strip.
    On certain old projects I could when thru AUX to REC, which was my L7/8/9 procedure.
    Recording takes place on a consolidated session, all audio tracks with no latency, which actually happens only it can't be heard.
    Monitoring is very inconsistent and in fact doesn't work at all. Any help?
    Mac Pro 2010 2x2.66 12 Core  32GB OSX 10.9.5 SSD 480
    Recording on HD 1TB, Fireface 800

    Correction: actually "thru AUX to REC channel" is not effective.
    It's just that I can input monitor thru an extra AUX channel independently of the REC channel.
    Sending the source to be recordered to aux and audio rec at same time.
    Mac Pro 2010 2x2.66 12 Core  32GB OSX 10.9.5 SSD 480
    Recording on HD 1TB, Fireface 800

Maybe you are looking for