Mute tool not fully muting entire highlighted portion of a track
Recently when I tried to mute a specifically highlighted section of a track by clicking Mute in the Effects menu the result was that it muted the highlighted portion but left a tiny fade out at the beginning and a tiny fade in at the end instead of completely muting the entire specifc area. If I zoom in and specifically choose appropriate edit points and zero crossings, that is where I need the sound to be muted, not a little bit after at one point and a little bit before at the other. I didn't have this problem with older versions of Au and I don't think I have always had this problem with 3.0, but I have experienced it before and I am right now. Is there just some spline curve option selected or something? Any help would much appreciated. Thanks a lot
I'm assuing that you are doing this in Edit View. If so, go to Edit>Preferences>Data and look at the settings in the Delete and Cut boundaries box. You might also want to alter the Crossfade in Edits box settings too. Setting these to zero or turning them off isn't usually a good idea unless you can guarantee that all of your edits are going to occur on zero-crossings, and even then you are likely to end up with clicks, because stopping any waveform abruptly is going to cause one - it's the nature of the beast.
Similar Messages
-
Help PS 5.5 eraser & paint tools not using entire diameter of brush
All brushes have been reset and are set the same. We are running CS5.5 Master Edition on a brand new 27" iMac 3.4 ghz Intel Core i7 Quad core using a Radeon AMD HD6970M.
This is a sample of how the tool is not using the entire diameter. This could be either erasing or painting a color.Steve I am not a Mac user, and I can't duplicate your situation, but you have gone five hours without a reply, so I'll at least bump your thread.
All I can think of is that it is to do with the cursor display problems lots of people experienced when CS4 first came out. That was a long time ago, but do still see the occassional glitch. That was always fixed with graphics card drivers, but I know Mac do that differently to Windows.
So anyone got a clue what is going on here? -
My iphone randomly mutes. Side mute button not on. Mute not highlighted.
Does anybody know what could be causing my iphone to randomly mute. Side mute button not on. Mute not highlighted. Happens on incoming and outgoing calls. Sometimes during an ongoing call, sometimes when call is first made or received.
Exactly my case, too. Unfortunately no response at all - the only thing I can find on the web are discussions that your ear might touch the MUTE button - but it is definitively not the case. As Susan writes, the mute button is not highlighted, pressing it does not change anything.
-
Acrobat 9 - How to highlight portions of an image?
As my screen name suggests, I am not well versed in Acrobat 9. I am attempting to highlight areas of an application that we send out to our students. Apparantly the portion of the application in the PDF that I am attempting to highlight is part of an image and not text. Other text portions of the PDF can be highlighted with the highlighting tool, just not the image. Does anyone have any ideas? Thanks in advance for your help!
You can try one of the tools, like Rectangle Tool, Polygon Tool.
-
I am using Logic Pro X. I do not know how to fade the volume at the end of a song or raise / lower the volume in an area of the track. I also have a loud instand volume blip in a portion of a track that I would like to lower or eliminate.
Hi
rmarlia wrote:
I am using Logic Pro X. I do not know how to fade the volume at the end of a song or raise / lower the volume in an area of the track. I also have a loud instand volume blip in a portion of a track that I would like to lower or eliminate.
Armadillosound wrote:
To create a fade out press T to open the tool menu and select the fade tool.
Completely inappropriate, and they all also not help with volume adjustments. Fades will only apply to Audio Regions in the Tracks area: they will not fade out the complete mix unless you first Bounce it, add that to the Tracks area, apply the Fades with the Fade tool, then Bounce in Place (Again).
Much much better to make use of Track automation to take care of Volume adjustments, and to Fade out the end of the song by applying Track Automation to the Output Channel
https://help.apple.com/logicpro/mac/10/#lgcpb1a1ea03
CCT -
Not be able to highlight text in pdf file???
Hello there,
There is an issue with Mac I guess I mean I am not able to use highlight tool in phf but pretty sure the file is ok coz I can highlight the same file on the other laptop. Have this happened to you before and how to deal with it?
Thanks!Patrick on writting saving code also its not hightlighting the text. Text gets selected but it doen't get highlighted with yellow color...
Dim gAvDoc As
Acrobat.CAcroAVDoc
Dim myhitlist As
Acrobat.CAcroHiliteList
Dim mypdpage As
Acrobat.CAcroPDPage
Dim acroPageView As
Acrobat.CAcroAVPageView
Dim textSelect As
Acrobat.CAcroPDTextSelect
Dim gPDFPath As String
Dim gApp As Acrobat.AcroApp
Dim mypddoc As Object
gPDFPath ="C:\Test.pdf"
'Initialize Acrobat by creating App object
gApp = CreateObject("AcroExch.App")mypddoc = CreateObject(
"AcroExch.PDDoc")
gApp.Show()
mypddoc.Open(gPDFPath)
gAvDoc = CreateObject("AcroExch.AVDoc")
gAvDoc = mypddoc.OpenAVDoc("testing")acroPageView = gAvDoc.GetAVPageView()
acroPageView.GoTo(1)
myhitlist = CreateObject(
"AcroExch.HiliteList")myhitlist.Add(50, 10)
mypdpage = acroPageView.GetPage()
textSelect = mypdpage.CreateWordHilite(myhitlist)
gAvDoc.SetTextSelection(textSelect)
gAvDoc.ShowTextSelect()
mypddoc.Save(PDSaveFull, gPDFPath)
gAvDoc.Close(True) -
It was pointed out that my links do not function correctly on Firefox on a Windows platform. When links are clicked, they do not fully display the NEW page until the mouse is moved! I have now observed it for myself on my fathers PC running Windows XP on Firefox.My PC is on Windows7
It is the 5 version of Firefox, so I know it is a current bug, and appears in no other browsers that I know of.Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
* Don't make any changes on the Safe mode start window.
* https://support.mozilla.com/kb/Safe+Mode
If it does work in Safe-mode then disable all extensions and then try to find which is causing it by enabling one at a time until the problem reappears.
* Use "Disable all add-ons" on the [[Safe mode]] start window to disable all extensions.
* Close and restart Firefox after each change via "File > Exit" (Mac: "Firefox > Quit"; Linux: "File > Quit")
In Firefox 4+ you can use one of these to start in <u>[[Safe mode]]</u>:
* Help > Restart with Add-ons Disabled
* Hold down the Shift key while double clicking the Firefox desktop shortcut (Windows)
* https://support.mozilla.com/kb/Troubleshooting+extensions+and+themes -
Anyone else have a problem with tools not working?
With no particular cause, int he middle of working on things, tools like lasso tool, eraser, the brush or the clone stamp stop working.
The program will hang for a while and then I am able to switch tools, while using one particular tool at that time won't work. Until I restart photoshop.
Changing Open to GL of/on won't work, and it is not because of the autosave in the background.
Anyone with this same problem?I am not sure if it's the same thing. I do get hangs when in the middle of editing. I haven't been able to pin it on any tool, selection, or function.
At first I thought it was because the splash screen for the beta hadn't come in and that made File>Open Recent unresponsive. It's as if the program doesn't really wake up until you get rid of the splash screen.
But that isn't it entirely because it happens during editing as well, long after the splash screen's gone. Suddenly, nothing responds--not tools, not menu items, not layers. It has happened with Topaz Plug Ins at least once, but the rest of the time it's been while working within Photoshop itself.
But photoshop didn't stop responding (according to the task manager), the cursor (whether mouse or stylus) still responds, no error messages, no crash. A little time goes by, then it responds again without exiting Photoshop, restarting, or anything else.
What I have noticed happens everytime I have this problem is that, if I just pressed a menu item (such as Layers, or File, or Edit) or a tool icon (such as the brush) it will remain in the selected position with either the darkened box around the menu item or the little outline around the tool). Now that I think of it, I think that the only common trigger is clicking on something. This can go on for as long as a couple of minutes, but it always resolves itself.
The only tool that might have choked during actual use is the lasso tool on polygonal mode. I just couldn't seem to make the next click.
I'm thinking now that it has something to do with saving in the background and--if that's the case--I'll live with it gladly. But it puzzles me because I think my system should be able to handle the extra memory involved in background saving.
These are my system specs:
Adobe Photoshop Version: 13.0 (13.0 20120305.m.415 2012/03/05:21:00:00) x64
Operating System: Windows 7 64-bit
Version: 6.1 Service Pack 1
System architecture: Intel CPU Family:6, Model:10, Stepping:5 with MMX, SSE Integer, SSE FP, SSE2, SSE3, SSE4.1, SSE4.2, HyperThreading
Physical processor count: 4
Logical processor count: 8
Processor speed: 2660 MHz
Built-in memory: 12279 MB
Free memory: 7367 MB
Memory available to Photoshop: 10994 MB
Memory used by Photoshop: 72 %
Image tile size: 128K
Image cache levels: 4
OpenGL Drawing: Enabled.
OpenGL Drawing Mode: Advanced
OpenGL Allow Normal Mode: True.
OpenGL Allow Advanced Mode: True.
OpenGL Allow Old GPUs: Not Detected.
Video Card Vendor: NVIDIA Corporation
Video Card Renderer: GeForce GTS 240/PCIe/SSE2
Display: 2
Display Bounds:= top: 0, left: 1920, bottom: 900, right: 3520
Display: 1
Display Bounds:= top: 0, left: 0, bottom: 1200, right: 1920
Video Card Number: 1
Video Card: NVIDIA GeForce GTS 240
OpenCL Unavailable
Driver Version: 8.17.12.9573
Driver Date: 20120209000000.000000-000
Video Card Driver: nvd3dumx.dll,nvwgf2umx.dll,nvwgf2umx.dll,nvd3dum,nvwgf2um,nvwgf2um
Video Mode: 1920 x 1200 x 4294967296 colors
Video Card Caption: NVIDIA GeForce GTS 240
Video Card Memory: 1024 MB
Video Rect Texture Size: 8192
Serial number: Tryout Version
Application folder: C:\Program Files\Adobe\Adobe Photoshop CS6 (64 Bit)\
Temporary file path: C:\Users\Carmen\AppData\Local\Temp\
Photoshop scratch has async I/O enabled
Scratch volume(s):
Q:\, 50.0G, 48.9G free
Required Plug-ins folder: C:\Program Files\Adobe\Adobe Photoshop CS6 (64 Bit)\Required\
Primary Plug-ins folder: C:\Program Files\Adobe\Adobe Photoshop CS6 (64 Bit)\Plug-ins\
Additional Plug-ins folder: C:\Users\Carmen\Documents\Adobe--Photoshop--PLUG INS--EXTRA FOLDER\
Installed components:
A3DLIBS.dll A3DLIB Dynamic Link Library 9.2.0.112
ACE.dll ACE 2012/01/18-15:07:40 66.492997 66.492997
adbeape.dll Adobe APE 2012/01/25-10:04:55 66.1025012 66.1025012
AdobeLinguistic.dll Adobe Linguisitc Library 6.0.0
AdobeOwl.dll Adobe Owl 2012/02/09-16:00:02 4.0.93 66.496052
AdobePDFL.dll PDFL 2011/12/12-16:12:37 66.419471 66.419471
AdobePIP.dll Adobe Product Improvement Program 6.0.0.1642
AdobeXMP.dll Adobe XMP Core 2012/02/06-14:56:27 66.145661 66.145661
AdobeXMPFiles.dll Adobe XMP Files 2012/02/06-14:56:27 66.145661 66.145661
AdobeXMPScript.dll Adobe XMP Script 2012/02/06-14:56:27 66.145661 66.145661
adobe_caps.dll Adobe CAPS 5,0,10,0
AGM.dll AGM 2012/01/18-15:07:40 66.492997 66.492997
ahclient.dll AdobeHelp Dynamic Link Library 1,7,0,56
aif_core.dll AIF 3.0 62.490293
aif_ocl.dll AIF 3.0 62.490293
aif_ogl.dll AIF 3.0 62.490293
amtlib.dll AMTLib (64 Bit) 6.0.0.75 (BuildVersion: 6.0; BuildDate: Mon Jan 16 2012 18:00:00) 1.000000
ARE.dll ARE 2012/01/18-15:07:40 66.492997 66.492997
AXE8SharedExpat.dll AXE8SharedExpat 2011/12/16-15:10:49 66.26830 66.26830
AXEDOMCore.dll AXEDOMCore 2011/12/16-15:10:49 66.26830 66.26830
Bib.dll BIB 2012/01/18-15:07:40 66.492997 66.492997
BIBUtils.dll BIBUtils 2012/01/18-15:07:40 66.492997 66.492997
boost_date_time.dll DVA Product 6.0.0
boost_signals.dll DVA Product 6.0.0
boost_system.dll DVA Product 6.0.0
boost_threads.dll DVA Product 6.0.0
cg.dll NVIDIA Cg Runtime 3.0.00007
cgGL.dll NVIDIA Cg Runtime 3.0.00007
CIT.dll Adobe CIT 2.0.5.19287 2.0.5.19287
CoolType.dll CoolType 2012/01/18-15:07:40 66.492997 66.492997
data_flow.dll AIF 3.0 62.490293
dvaaudiodevice.dll DVA Product 6.0.0
dvacore.dll DVA Product 6.0.0
dvamarshal.dll DVA Product 6.0.0
dvamediatypes.dll DVA Product 6.0.0
dvaplayer.dll DVA Product 6.0.0
dvatransport.dll DVA Product 6.0.0
dvaunittesting.dll DVA Product 6.0.0
dynamiclink.dll DVA Product 6.0.0
ExtendScript.dll ExtendScript 2011/12/14-15:08:46 66.490082 66.490082
FileInfo.dll Adobe XMP FileInfo 2012/01/17-15:11:19 66.145433 66.145433
filter_graph.dll AIF 3.0 62.490293
hydra_filters.dll AIF 3.0 62.490293
icucnv40.dll International Components for Unicode 2011/11/15-16:30:22 Build gtlib_3.0.16615
icudt40.dll International Components for Unicode 2011/11/15-16:30:22 Build gtlib_3.0.16615
icudt42.dll International Components for Unicode 4, 2, 0, 0
icuin42.dll International Components for Unicode 4, 2, 0, 0
icuuc42.dll International Components for Unicode 4, 2, 0, 0
image_compiler.dll AIF 3.0 62.490293
image_flow.dll AIF 3.0 62.490293
image_runtime.dll AIF 3.0 62.490293
JP2KLib.dll JP2KLib 2011/12/12-16:12:37 66.236923 66.236923
libifcoremd.dll Intel(r) Visual Fortran Compiler 10.0 (Update A)
libmmd.dll Intel(r) C Compiler, Intel(r) C++ Compiler, Intel(r) Fortran Compiler 10.0
LogSession.dll LogSession 2.1.2.1640
mediacoreif.dll DVA Product 6.0.0
MPS.dll MPS 2012/02/03-10:33:13 66.495174 66.495174
msvcm80.dll Microsoft® Visual Studio® 2005 8.00.50727.6195
msvcm90.dll Microsoft® Visual Studio® 2008 9.00.30729.1
msvcp100.dll Microsoft® Visual Studio® 2010 10.00.40219.1
msvcp80.dll Microsoft® Visual Studio® 2005 8.00.50727.6195
msvcp90.dll Microsoft® Visual Studio® 2008 9.00.30729.1
msvcr100.dll Microsoft® Visual Studio® 2010 10.00.40219.1
msvcr80.dll Microsoft® Visual Studio® 2005 8.00.50727.6195
msvcr90.dll Microsoft® Visual Studio® 2008 9.00.30729.1
onOneActivationToolbox.dll onOneActivationToolbox 1.1
onOneToolbox2.dll onOne Toolbox2 Dynamic Link Library 2.2.0
onOneToolboxPlus.dll onOne Toolbox2 Dynamic Link Library 2.2.0
onOneWelcomeDialog.dll Essentials 1.0.0.1
OnOneWidgets.dll OnOneWidgets dll 2.5
ONProxySupport.dll TODO: <Product name> 1.0.0.1
pdfsettings.dll Adobe PDFSettings 1.04
Photoshop.dll Adobe Photoshop CS6 CS6
Plugin.dll Adobe Photoshop CS6 CS6
PlugPlug.dll Adobe(R) CSXS PlugPlug Standard Dll (64 bit) 3.0.0.383
PSArt.dll Adobe Photoshop CS6 CS6
PSViews.dll Adobe Photoshop CS6 CS6
SCCore.dll ScCore 2011/12/14-15:08:46 66.490082 66.490082
ScriptUIFlex.dll ScriptUIFlex 2011/12/14-15:08:46 66.490082 66.490082
tbb.dll Intel(R) Threading Building Blocks for Windows 3, 0, 2010, 0406
tbbmalloc.dll Intel(R) Threading Building Blocks for Windows 3, 0, 2010, 0406
TfFontMgr.dll FontMgr 9.3.0.113
TfKernel.dll Kernel 9.3.0.113
TFKGEOM.dll Kernel Geom 9.3.0.113
TFUGEOM.dll Adobe, UGeom© 9.3.0.113
updaternotifications.dll Adobe Updater Notifications Library 6.0.0.24 (BuildVersion: 1.0; BuildDate: BUILDDATETIME) 6.0.0.24
WRServices.dll WRServices Friday January 27 2012 13:22:12 Build 0.17112 0.17112
wu3d.dll U3D Writer 9.3.0.113
zlib.dll zlib 1.2.5
Required plug-ins:
3D Studio 13.0 (13.0 20120305.m.415 2012/03/05:21:00:00)
Accented Edges 13.0
Adaptive Wide Angle 13.0
ADM 3.11x01
Angled Strokes 13.0
Average 13.0 (13.0 20120305.m.415 2012/03/05:21:00:00)
Bas Relief 13.0
BMP 13.0
Camera Raw 7.0
Chalk & Charcoal 13.0
Charcoal 13.0
Chrome 13.0
Cineon 13.0 (13.0 20120305.m.415 2012/03/05:21:00:00)
Clouds 13.0 (13.0 20120305.m.415 2012/03/05:21:00:00)
Collada 13.0 (13.0 20120305.m.415 2012/03/05:21:00:00)
Color Halftone 13.0
Colored Pencil 13.0
CompuServe GIF 13.0
Conté Crayon 13.0
Craquelure 13.0
Crop and Straighten Photos 13.0 (13.0 20120305.m.415 2012/03/05:21:00:00)
Crop and Straighten Photos Filter 13.0
Crosshatch 13.0
Crystallize 13.0
Cutout 13.0
Dark Strokes 13.0
De-Interlace 13.0
Dicom 13.0
Difference Clouds 13.0 (13.0 20120305.m.415 2012/03/05:21:00:00)
Diffuse Glow 13.0
Displace 13.0
Dry Brush 13.0
Eazel Acquire 13.0 (13.0 20120305.m.415 2012/03/05:21:00:00)
Embed Watermark 4.0
Entropy 13.0 (13.0 20120305.m.415 2012/03/05:21:00:00)
Extrude 13.0
FastCore Routines 13.0 (13.0 20120305.m.415 2012/03/05:21:00:00)
Fibers 13.0
Film Grain 13.0
Filter Gallery 13.0
Flash 3D 13.0 (13.0 20120305.m.415 2012/03/05:21:00:00)
Fresco 13.0
Glass 13.0
Glowing Edges 13.0
Google Earth 4 13.0 (13.0 20120305.m.415 2012/03/05:21:00:00)
Grain 13.0
Graphic Pen 13.0
Halftone Pattern 13.0
HDRMergeUI 13.0
IFF Format 13.0
Ink Outlines 13.0
JPEG 2000 13.0
Kurtosis 13.0 (13.0 20120305.m.415 2012/03/05:21:00:00)
Lens Blur 13.0
Lens Correction 13.0
Lens Flare 13.0
Liquify 13.0
Matlab Operation 13.0 (13.0 20120305.m.415 2012/03/05:21:00:00)
Maximum 13.0 (13.0 20120305.m.415 2012/03/05:21:00:00)
Mean 13.0 (13.0 20120305.m.415 2012/03/05:21:00:00)
Measurement Core 13.0 (13.0 20120305.m.415 2012/03/05:21:00:00)
Median 13.0 (13.0 20120305.m.415 2012/03/05:21:00:00)
Mezzotint 13.0
Minimum 13.0 (13.0 20120305.m.415 2012/03/05:21:00:00)
MMXCore Routines 13.0 (13.0 20120305.m.415 2012/03/05:21:00:00)
Mosaic Tiles 13.0
Multiprocessor Support 13.0 (13.0 20120305.m.415 2012/03/05:21:00:00)
Neon Glow 13.0
Note Paper 13.0
NTSC Colors 13.0 (13.0 20120305.m.415 2012/03/05:21:00:00)
Ocean Ripple 13.0
Oil Paint 13.0
OpenEXR 13.0
Paint Daubs 13.0
Palette Knife 13.0
Patchwork 13.0
Paths to Illustrator 13.0
PCX 13.0 (13.0 20120305.m.415 2012/03/05:21:00:00)
Photocopy 13.0
Photoshop 3D Engine 13.0 (13.0 20120305.m.415 2012/03/05:21:00:00)
Picture Package Filter 13.0 (13.0 20120305.m.415 2012/03/05:21:00:00)
Pinch 13.0
Pixar 13.0 (13.0 20120305.m.415 2012/03/05:21:00:00)
Plaster 13.0
Plastic Wrap 13.0
PNG 13.0
Pointillize 13.0
Polar Coordinates 13.0
Portable Bit Map 13.0 (13.0 20120305.m.415 2012/03/05:21:00:00)
Poster Edges 13.0
Radial Blur 13.0
Radiance 13.0 (13.0 20120305.m.415 2012/03/05:21:00:00)
Range 13.0 (13.0 20120305.m.415 2012/03/05:21:00:00)
Read Watermark 4.0
Reticulation 13.0
Ripple 13.0
Rough Pastels 13.0
Save for Web 13.0
ScriptingSupport 13.0
Shear 13.0
Skewness 13.0 (13.0 20120305.m.415 2012/03/05:21:00:00)
Smart Blur 13.0
Smudge Stick 13.0
Solarize 13.0 (13.0 20120305.m.415 2012/03/05:21:00:00)
Spatter 13.0
Spherize 13.0
Sponge 13.0
Sprayed Strokes 13.0
Stained Glass 13.0
Stamp 13.0
Standard Deviation 13.0 (13.0 20120305.m.415 2012/03/05:21:00:00)
Sumi-e 13.0
Summation 13.0 (13.0 20120305.m.415 2012/03/05:21:00:00)
Targa 13.0
Texturizer 13.0
Tiles 13.0
Torn Edges 13.0
Twirl 13.0
U3D 13.0 (13.0 20120305.m.415 2012/03/05:21:00:00)
Underpainting 13.0
Vanishing Point 13.0
Variance 13.0 (13.0 20120305.m.415 2012/03/05:21:00:00)
Variations 13.0 (13.0 20120305.m.415 2012/03/05:21:00:00)
Water Paper 13.0
Watercolor 13.0
Wave 13.0
Wavefront|OBJ 13.0 (13.0 20120305.m.415 2012/03/05:21:00:00)
WIA Support 13.0 (13.0 20120305.m.415 2012/03/05:21:00:00)
Wind 13.0
Wireless Bitmap 13.0 (13.0 20120305.m.415 2012/03/05:21:00:00)
ZigZag 13.0
Optional and third party plug-ins:
Mask Pro 4.1 4.1.9c
Mask Pro 4.1 Make Work Path 4.1.9c
Mask Pro 4.1 Select 4.1.9c
Perfect Portrait 1.0.1
Perfect Portrait 1.0.1
Perfect Portrait Filter 1.0.1
Perfect Portrait Filter 1.0.1
Perfect Portrait Smart Filter 1.0.1
Perfect Portrait Smart Filter 1.0.1
Perfect Resize 7.0 Professional Edition 7.0.7
Perfect Resize 7.0 Professional Edition Batch 7.0.7
Perfect Resize 7.0 Professional Edition Filter 7.0.7
Perfect Resize 7.0 Professional Edition Format 7.0.7
PhotoFrame 4.5 Free 4.5.3
PhotoFrame 4.5 Free Batch 4.5.3
PhotoFrame 4.5 Free Hidden 4.5.3
PhotoTools 2.5 Free 2.5.5
PhotoTools 2.5 Free Batch 2.5.5
PhotoTools 2.5 Hidden NO VERSION
PhotoTools 2.5 Hidden NO VERSION
Reduce Noise 6.2.0.0
Topaz Adjust 5 10.0
Topaz BW Effects 10.0
Topaz Clean 3 10.0
Topaz DeJpeg 4 10.0
Topaz DeNoise 5 10.0
Topaz Detail 2 10.0
Topaz InFocus 10.0
Topaz Lens Effects 10.0
Topaz ReMask 3 10.0
Topaz Simplify 3 10.0
TopazRemaskAutomate NO VERSION
Plug-ins that failed to load: NONE
Flash:
onOne
Mini Bridge
Kuler
Installed TWAIN devices: NONE -
SQL Developer 3.2/4EA1 not fully reading TNSNAMES
Hi,
We are using both 3.2 and the 4EA1 versions, and have found that both are not fully reading the TNSNAMES file.
In the TNSNAMES file, we have databases that are configured with either SID or SERVICENAME.
It isn't excluding databases setup with either.
Can anyone suggest what the issue might be?
Cheers,
Russell H.This is just a shot in the dark, but have you checked your tnsnames file to see if anything besides the entry name (and commented lines) begins in column one? Although sqlplus will usually parse such entries successfully, some of the other tools have had issues with them in the past... they seem to misparse the entry, which often messes up the processing of subsequent items.
Here's a quick example, with spaces replaced by periods for readability:
# good entry
mydb=
..(DESCRIPTION=
....(ADDRESS=(PROTOCOL=TCP)(HOST=myhost)(PORT=1521))
....(CONNECT_DATA=(SERVICE_NAME=myservice))
# bad entry
mydb=
(DESCRIPTION=
..(ADDRESS=(PROTOCOL=TCP)(HOST=myhost)(PORT=1521))
..(CONNECT_DATA=(SERVICE_NAME=myservice))
If memory serves, only the entry name is actually supposed to begin in column 1... pretty sure I found that documented somewhere, back when I first encountered the issue. So if this is indeed your problem, I suspect that the official verdict would be that your tnsnames file is bad and needs to be corrected.
Again, this is just a wild guess. -
Hi,
how can I use a portal wich is not in a domain? The BI Postinstallation will have a domain but we didn't have one for this server. I can not execute without give a domain. When I set a domain name which is not right, the Postinstallation is execute right. But if I then execute a template from BEx, the browser is empty. Thats right I think. If I then manually correct the url in the browser the error occurs which is descriped in Note 1126545: Not fully qualified BEx URL.
What can I do, to fix this problem?
Thanks,
PeterThe more i read the more i think CPPO is the right tool to use to move your EP to the domain via a portal copy.
If you can't do any changes to the portal you'll find difficult to work around a lot of things that require FQDN.
That's my 2 cents.
regards
Juan
PS: the note was to give you a hint about changing the host name to include the domain. (It might not do the trick though) -
Making interactive PDFs...Is prototype not fully functional?
I am a business guy (technically savy) who is interested in creating interative PDFs (primarily navigation).
The mantra of fireworks, design once, export to many is very appealing. But I don't understand why it refers to the final product as a prototype.
question 1) The training videos refer to the final interactive PDF created as a prototype. Why? What makes it a prototype? Why isn't it a fully fuctional interactive PDF that can be made more sophisticated by adding forms, etc. ? If it is a prototype, what program do you use to make it fully functional? Is that InDesign? Is Fireworks merly a strating point, to be finished in InDesign? What is disabled to make it only a prototype?
question 2) This is the same question, but about export to CSS & Images (web site). I realize you can add far more functinality with Dreamweaver, but isn't the export a fully functional (if simple), web sight? What is disabled to make it only a prototype?
Prototype implies to me that it does not produce a useable final product. It has to be made useable or finished by another product.
THanks!
BobI think the term "prototype" is being bandied about a bit too liberally <grin>. Here's my viewpoint:
Fireworks can produce finished final artwork for screen. I do this all the time as do many other much more talented Fireworks users.
From a web site and application perspective, Fireworks is a prototyping tool. It doesn't build final web sites for applications; it just builds the graphical shell that other applications (such as DW or FC) can use for building out the final product. As a prototyping tool, you can create very realistic representations of the final product, for client feedback and review and to a degree, user testing. One option for gaining feedback from the client is the PDF export. Combined with Acrobat Pro, you can activate the commenting feature and then this PDF gives you and the client the ability to place feedback right in the PDF just by using Acrobat Reader. In this way it can be a useful tool while designing the site or application, and getting specific feedback from the client within the graphical prototype.
The PDF Export could also be a final product, IMO, depending on it's end use. There is no rollover support, video or audio support from within Fireworks or the export process. Likewise for transitional effects. Interactivity though, using the rectangular slice or hotspot tools, is fully functional. Keep in mind though, that default print resolution in FW is 72 ppi. If you plan on printing out this PDF, you'll want to start with a higher resolution for better printing quality.
HTH -
Large Premiere CS5 Project not fully loading
I have a project in Premiere that is relatively large (lots of footage, effects, music, etc.) that will not fully load. The actual 'loading' window does appear, with the loading taking a minute or so. However, when the project finally opens, all clips say "Media Pending", and take forever to create thumbnails. The project has not made it through this opening process without appearing to completely create all thumbnails to only crash. Sometimes the 'Saving' window will appear, but the progress bar will remain empty. The window is then inactive, and if I try to cancel the saving, the entire program crashes. I'm not too happy about this. Any suggestions?
Thanks. We're getting closer. Next...
when I would click on the project to use it
What specifically does that mean? Where exactly are you clicking? -
Page not fully loading unless refreshed
I am experiencing a bit of difficulty with one of my websites and I am hoping that some fresh eyes may help. What is happening is, the index page is not fully loading on arrival. It only loads if the page is refreshed. Can someone take a look and see if you can see the problem?
Any help is appreciatedHave a look where?
Can you post a link to your website?
* "Clear the Cache": Tools > Options > Advanced > Network > Offline Storage (Cache): "Clear Now"
* "Remove the Cookies" from sites that cause problems: Tools > Options > Privacy > Cookies: "Show Cookies"
Start Firefox in [[Safe Mode]] to check if one of your add-ons is causing your problem (switch to the DEFAULT theme: Tools > Add-ons > Themes).
* Don't make any changes on the Safe mode start window.
See [[Troubleshooting extensions and themes]] and [[Troubleshooting plugins]]
Other things that need attention:<br>
Your above posted system details show outdated plugin(s) with known security and stability risks that you should update.
*Shockwave Flash 10.0 r22
Update the [[Managing the Flash plugin|Flash]] plugin to the latest version.
*http://www.adobe.com/software/flash/about/ -
How to highlight portion of Image
Hi
I have a image. i want to highlight the portion of an image. I have the start pixel value,end pixel value and height and width.
I want to highlight the particular area by yellow color and color should be transparent so that highlighted portion can be seen.
What would be the approach.
I tried it with coloring the particular pixel value but i couldnt achieve transparency.
Please provide me piece of code
Any help would be highly appreciated.
thanksAll your tiff images are black and white. Thus, they can't be highlighted since the highlight will result in a color that's not black or white. This problem will extend to all palette based images (ones with an IndexColorModel).
The solution is to turn the palette image into a full RGB one, which you did by using an intermediate image.
Any improvement on this.1) You don't need an intermediate image if ColorModel#getPixelSize() returns >= 24. This will mostly be a memory/garbage collection improvement.
2) You don't need to use TYPE_INT_ARGB for the intermediate image if the original image doesn't have and alpha channel. Instead you can use TYPE_3BYTE_BGR. Again, this would be a memory improvement and the file size may be less since there's no alpha channel.
3) The TIFImageWriter supports several compression schemes. Some of the compression schemes (LZW, JPEG, DEFLATE) offer better file sizes then the default one. When you do a straight call to,
ImageIO.write(newImage, "tif", new File("D:/DocHighlighting/Out.TIF"));you're using the default compression scheme. LZW will offer a smaller file size and the tiff file will be just as portable. JPEG will offer the smallest file size, but more image editing programs will have a trouble opening it and it's a lossy compression. I think DEFLATE is even less portable than JPEG, but it's a lossless compression and will offer a smaller file size than LZW.
Although i tried this way and it worked but new image size is almost 14612KB and original image size was 289KBThat's because it went from black and white (with a specialized black/white compression) to a full colored image. Such is the consequence of introducing more colors. You can decrease the file size a bit by changing the compression type and not introducing an alpha channel if not needed, but for the most part the file size will still be much larger then the black and white one.
If you're really ambitious, you can create an IndexColorModel with 4 colors - black, white, black under highlighting, and white under highlighting - and use that as the color model for your black/white-highlighted images. Then the TIFFImageWriter may very well save the image as palette based, resulting in a significant decrease in the file size. -
Adobe XI - Hightlight text tool not working
Just downloaded adobe XI and the hightlight text tool not working. How can I get this to work.
I guess you can always use the box tool in drawing markups to draw a box around the text then play with the colors until you get close to what you want.
The only thing I don't like about that (besides it being a PITA) is that it covers the text with color as well where the highlight tool does not.
Maybe you are looking for
-
How do I get my entire site to come up when someone clicks search results of just one page of my sit
When someone searches for my site in google, sometimes only one page of my site comes up. If they click it, they may only get my menubar, or a page, such as my calendar page without a menubar or topbar. How can I make it so when they click the lin
-
Bulk Administration - Directory Number Voicemail Profile
I am tryingg to figure out a way to bulk change the voicemail profile for a random sampling of extensions in Cisco Unified Communications Manager version 8.5. I know you can do this if there is some sort of unifiing feature between the extensions lik
-
I just want to know where to find my shared libraries on the stupid new iTunes. The layout was fine before, but when they changed it, I can't seem to find them. The articles on Apple are a million years old, before the latest iTunes update, so they a
-
Thumbnail & photo previews - not always?
I've noticed that only some of the photos from a download (from my camera) will show up as a preview-thumb on my desktop--the others show up as mini Preview icons. I don't understand because the images are coming from the same camera and are all jpgs
-
I have an iphone and have a 1 in a red circle on my photos app. What does this mean?
I have a 1 in a red circle over my photos icon on my iphone. What does this mean?