Muting incoming call after latest 5.0.2 update
Hi! After updating my Z3C to Lollipop, I've noticed few drawbacks when it comes to smartband functionality. Despite (in my opinion) Sony bad decision of dropping their own Bluetooth unlock in favor of android smartlock, making using smartband for this extremely hard, I'm also quite irritated with how it handles incoming calls. Earlier I was able to shut the ringtone down by pressing the button on smrtband, now doing this results in phone switching to priority mode, but the ringtone is still playing. I'm not sure if this is happening from the latest update or since first lollipop software. Is someone experiencing the same behaviour? Maybe it is some update error. I'd be grateful if someone could check their devices!
Anyone facing the same problem? If someone could chceck please, i'll know then if it's only my device or not
Similar Messages
-
My MacAir 1st gen. won't boot after latest OS X Lion update.
My MacAir 1st gen. won't boot after latest OS X Lion update. tried safe boot(didn't work) tried disk repair, said it was successful, but my mac won't start up. Just get white screen. Also been having trouble with it overheating. Fan seems to work. But when it get too hot whole interface slows down.
Yikes, I hope you have AppleCare on it still, I think it needs to be taken in, but as a last ditch effort...
Have you done a PRAM reset, CMD+Option+p+r...
http://support.apple.com/kb/HT1379
In fact, do 3 in a row, takes a bit of time. -
Bluetooth no longer works for incoming calls after recent update
When I updated my Bluetooth to iOS 6, the Bluetooth no longer works for incoming calls. I press button to answer call, it makes a small cracking noise, and then sends the call to my phone. I can use the Bluetooth for outgoing calls and it works just fine. I was hoping when I updated to iOS 6.0.1 that the problem would be fixed. I have uninstalled and reinstalled Bluetooth but that has not helped either. I am frustrated. I have a LG HBM-905 Bluetooth that I loved prior to this problem.
Magically started working today after I synced.
Post relates to: Treo 700w (Verizon) -
C2-01: no reconnect incoming calls after 20sec
Hi everybody,
The incoming calls on my Nokia C2-01 are being reconnect after 20 sec. What do i have to do to change that? I don't want incoming calls to be reconnected and i think 20sec is real fast to reconnect a call, certainly when the phone is not that nearby.
Hope you can help.
ErickHi ,
Thanks for joining the Community.
Please get in touch with customer service and our technical team will be happy to help.
Click here for contact details.
Thanks
James -
Dropped Incoming calls after 20 seconds, Reason: Q.850;cause=86
I have the following scenario for incoming calls:
PSTN ---- E1 ---> Digium Gateway --- SIP ---> Router 2921 ------SIP ----> CUCM
All incoming calls from the PSTN get dropped after 20 seconds. All outgoing calls to the PSTN work fine..
The Router 2921 generates a BYE message with Reason: Q.850;cause=86 to the Digium Gateway.
Attached is the debug, show run and a packet capture with all the SIP messages..
If someone could please give me to a solution.
Thanks!Hello Carlos,
Here is the analysis of the traces....
Timestamp Node / Interface Device IP Direction Protocol Message Name TCP Handle / From Tag Call Ref / ID
05/09/2014 16:52:36.608 172.17.0.6 172.16.50.10 In SIP INVITE as12f8f5d4 [email protected]
05/09/2014 16:52:36.620 172.17.0.6 172.17.0.3 Out SIP INVITE A424AFA0-1D7B [email protected]
05/09/2014 16:52:36.620 172.17.0.6 172.16.50.10 Out SIP 100 Trying as12f8f5d4 [email protected]
05/09/2014 16:52:36.624 172.17.0.6 172.17.0.3 In SIP 100 Trying A424AFA0-1D7B [email protected]
05/09/2014 16:52:36.632 172.17.0.6 172.17.0.3 In SIP 180 Ringing A424AFA0-1D7B [email protected]
05/09/2014 16:52:36.632 172.17.0.6 172.16.50.10 Out SIP 180 Ringing as12f8f5d4 [email protected]
05/09/2014 16:52:39.140 172.17.0.6 172.17.0.3 In SIP 200 OK A424AFA0-1D7B [email protected]
05/09/2014 16:52:39.144 172.17.0.6 172.17.0.3 In SIP SUBSCRIBE 844851~97a97412-a383-4ad3-9458-162b2737f313-47291175 [email protected]
05/09/2014 16:52:39.148 172.17.0.6 172.17.0.3 Out SIP ACK A424AFA0-1D7B [email protected]
05/09/2014 16:52:39.148 172.17.0.6 172.17.0.3 Out SIP 200 OK 844851~97a97412-a383-4ad3-9458-162b2737f313-47291175 [email protected]
05/09/2014 16:52:39.148 172.17.0.6 172.17.0.3 Out SIP NOTIFY A424AFA0-1D7B [email protected]
05/09/2014 16:52:39.152 172.17.0.6 172.17.0.3 In SIP 200 OK A424AFA0-1D7B [email protected]
05/09/2014 16:52:39.152 172.17.0.6 172.16.50.10 Out SIP 200 OK as12f8f5d4 [email protected]
05/09/2014 16:52:39.652 172.17.0.6 172.16.50.10 Out SIP 200 OK as12f8f5d4 [email protected]
05/09/2014 16:52:40.652 172.17.0.6 172.16.50.10 Out SIP 200 OK as12f8f5d4 [email protected]
05/09/2014 16:52:42.652 172.17.0.6 172.16.50.10 Out SIP 200 OK as12f8f5d4 [email protected]
05/09/2014 16:52:46.652 172.17.0.6 172.16.50.10 Out SIP 200 OK as12f8f5d4 [email protected]
05/09/2014 16:52:50.652 172.17.0.6 172.16.50.10 Out SIP 200 OK as12f8f5d4 [email protected]
05/09/2014 16:52:54.652 172.17.0.6 172.16.50.10 Out SIP 200 OK as12f8f5d4 [email protected]
05/09/2014 16:52:58.652 172.17.0.6 172.17.0.6 Out SIP BYE A424AFAC-1EC1 [email protected]
05/09/2014 16:52:58.652 172.17.0.6 172.17.0.3 Out SIP BYE A424AFA0-1D7B [email protected]
The 200 Ok is not being acknowledged by the Digium Gateway . Hence the call is dropped .
Please check why the "Digium" side is not sending an ACK for this transaction.
Hope this helps!
Regards,
Karthik Sivaram -
N95 shut down and no incoming calls after using GP...
Dear forum, firstly I apologize if this has been addressed elsewhere. I bought a N95 for christmas and just recently bought a 3 yr license for the voice directed nav. My problem is that after using the GPS my phone refused to receive any incoming calls or allowed me to to make calls. Happens everytime I use the GPS function. It also shuts off automatically or tries to reset. It does this until I remove the battery and turn it back on. I should stress that this happens only after using GPS. Any ideas other than upgrading the firmware?
CheersHi robby_au2007
Does it make any difference if active connection is set to "never" rather than "as needed" in Nokia Maps Application > Options > Settings > Network?
If you hadn't purchased a 3yr license, I might have suggested installing the beta version of Nokia Maps 2.0 available from:
http://www.nokia.com/betalabs/maps
Happy to have helped forum in a small way with a Support Ratio = 37.0 -
Hi,
I have a few problems with my z10 STL100-2:
1. I don't hear the sound of incoming calls. (other notifications I do hear)
2. When I connect the device to blackberry link I receive a message in the bl. link that I need to disconnect the device from the computer and complete the defenition process in the device, whereas in the device it says that the definition was completed. Therefore I cannot connect to the bl. link.
I'd appreciate any help.
Thank you!welcome to the club. lots of post for exactly the same thing pluss more.
while we wait for a solution also check your callender and see if your alarm on that only rings for 2 seconds. -
Iphone 3GS keeps crashing and wont hang up after out & incoming calls after repairs
I have had my iphone 3GS back to vodafone after I could not make calls, kept saying call failed!. I did all the troubleshooting tips, was okay for a short time, then shortly started doing same thing.I took it back to the store and on that occasion the assistant took the phone out of the protective cover i always had it in to replace the simcard in case it was this that was causing the problem ,then he dropped it onto the shops wooden floor and it bounced, he picked it up & went bright red & kept apologising , I then said if I have any more problems with it then I will come back & see him & he said yes. Shortly after I noticed the sim cover on top of phone was missing but i could see the simcard inside, so I returned to the store & informed them of this, i was advised by the earlier assistant 'Craig' that he thought that the sim tray was underneath the simcard which he then removed the simcard, then advised me he didn't want to go poking about in it in case it was inside and he would send the phone to be repaired & gave me a replacement phone until mine was back. I waited approx 2 weeks before receiving a call from Vodafone saying they would repair it if I payed over £100! as it was not covered under my insurance, I informed them the assistant dropped the phone in store and then i noticed the problem & was then told they would investigate this and call back, 10 minutes later they called back to say it would be a free repair. Since the repair I have had nothing but trouble with the phone crashing when I access apps , sticking on the hangup screen with in & out going calls for approx 10 minutes or more, when I turn phone on the Apple logo stays on the screen for long periods off time. When I access my music the track will change part way through to another track & also sometimes refusing to charge. I am fed up with going back & forth to the store which is quite a distance from my home & the phone has more problems since it was ''dropped'' & then ''repaired'' & I am at a loss of what to do. I feel I have been treated unfairly and gone along with all Vodafone asked of me. Please could someone from Apple help me!!!
The steps you already took were the correct ones - reset, restore from backup, restore as new phone. You could always try them again, but a Restore with set up as new is the 'ulitmate' troubleshooter - if that doesn't correct the issue, it's usually time for a replacement phone. Unfortunately, you've learned a hard lesson there, although I don't see how Apple screwed you - it's no secret that the iPhone warranty is valid only in the country of original purchase (as a little research on your part would have shown).
See how much money you saved with your eBay purchase? Next time buy the phone from Apple or an authorized UK carrier. -
I can not see incoming calls after LOLLIPOP update
Hi. When i get a call i cannot see screen, who is calling. It is necessary when phone is locked. Colud you help me?
You may need to perform a software repair using PC Companion.The process will erase all internal memory.You might need to charge your device for about 1-2 hours before so the device has at least 60% battery.
Make sure the device is not connected to computer or laptop and turned off (sometimes you have to press power button and volume up until the device vibrates 3 times or on some devices you have to press the small button near the SIM tray or on the back of the device).
Open PC companion->support zone->phone/tablet software update->repair my phone/tablet blue highlighted.Follow the steps given,do not connect your phone until prompted to press volume down while plugging USB cable. If PC companion does not start the repair process, you might need to run it in compatibility mode with Windows 7 (in some cases XP).
All we have to decide is what to do with the time that is given to us - J.R.R. Tolkien -
How do I change my voice message to a personal message after the phone has been setup?
Start the Phone app
Tap Greeting in the upper left corner.
Tap Record to begin recording and speak your new message clearly
Then tap Save. -
Unable to view contact photos during incoming calls after 7.1 upgrade.
This was working fine up until the phone was upgraded on my 5s
Has any one else had the same problem, and if so do you know of a fix?Same thing has happened to my wifes phone, upgrading to 7.1 on her 5s.
-
Problems hearing an incoming caller after update to ios7
Since I upgraded to the original ios7 update I cannot hear when speaking or hear the other person when speaking directly from headset - it is very muffled. I can hear fine on bluetooth or with earphones - any advice
Basic troubleshooting from the User's Guide is reset, restart, restore (first from backup then as new). Try each of these in order until the issue is resolved.
-
After the latest update of Mac OS X (which may or may not be the cause), I choose the "Recipient" and the "done" panel which usually turns the Widget around to the message side has gone, and now I cannot sent and SMS !
Let's start by asking how you went about applying the update. Did you do any preparation like using Disk Utility to check your hard drive for problems, repairing permissions, etc? Did you continue to use your machine while the update was being applied? It is very important to make sure your system is in a stable state before applying any update.
Another source of headaches, especially for Safari, is that third party plugins often cause problems when a new version of Safari/WebKit are released. Do you have any such plugins installed? If so list them here and someone may be able to pick out the bad guy. The place to look for these critters is /Library/Internet Plug-Ins or ~/Library/Internet Plug-Ins (the Library folder at the top of your hard drive and the Library folder in your user directory respectively). PithHelmet is one of the usual suspects as well as any of the Safari "enhancers" out there.
Unless your update went totally south you should be able to get Safari working again. -
After I updated my phone to 7.0.2. I ahve not been able to make outgoing calls. And when I speak into the phone all i cam here is myvoice through the ear piece. I would have o hang up and try again atleast 3 times to get the call to go through. Also when on the phone with headset the phone will constantly say call failure even though I have a strong signal. It's an iPhone 5 thru Verizon. Please Help!!!
The same problem for me. When i'm trying to make outgoing call, 60% of times it's just freezing at "Calling...." without any sounds inside. When i'm trying to cancel phone call, it's freezing at "Cancelling...". But 2-3 minute doesn't do it.
My friends most of times can't phone to me because iphone always unavaiable. The one things that helps - every time reset phone with button. During one day it can be 20-30 times.
THIS IS THE WORST IOS WHAT I EVER SEEN... iPhone should be PHONE primary, not any other features.
iPhone 5 / iOS 7.0.2
Problems starting from iOS 7.0.0 -
Some CNAME DNS queries fail after latest 10.6.5 update
Right after rebooting from the latest MacOS X update I noticed some DNS queries are failing. These happen to be DNS queries for CNAME records. Other computers in the same network are not affected by this problem, including Mac's to wich the update was not yet installed.
Here are the simple diagnostic steps:
snowboard:~ pmsjt$ nslookup imap.texair.net.
Server: 192.168.0.14
Address: 192.168.0.14#53
imap.texair.net canonical name = taz.warner.local.
Name: taz.warner.local
Address: 192.168.0.12
snowboard:~ pmsjt$ ping imap.texair.net
ping: cannot resolve imap.texair.net: Unknown host
snowboard:~ pmsjt$
snowboard:~ pmsjt$ ping taz.warner.local
PING taz.warner.local (192.168.0.12): 56 data bytes
64 bytes from 192.168.0.12: icmp_seq=0 ttl=64 time=2.818 ms
64 bytes from 192.168.0.12: icmp_seq=1 ttl=64 time=2.211 ms
64 bytes from 192.168.0.12: icmp_seq=2 ttl=64 time=1.425 ms
64 bytes from 192.168.0.12: icmp_seq=3 ttl=64 time=2.242 ms
64 bytes from 192.168.0.12: icmp_seq=4 ttl=64 time=4.882 ms
64 bytes from 192.168.0.12: icmp_seq=5 ttl=64 time=3.190 ms
^C
--- taz.warner.local ping statistics ---
6 packets transmitted, 6 packets received, 0.0% packet loss
round-trip min/avg/max/stddev = 1.425/2.795/4.882/1.083 ms
snowboard:~ pmsjt$Just as a sanity check, the second portion of the clause from the KB article doesn't apply in your situation, does it?
Additionally, Mac OS X v10.6 automatically detects when the local network operator has set up a name server that will answer name requests for a domain ending in ".local". It does this by checking to see if there is a Start Of Authority (SOA) record for the top level domain "local", which is how a DNS server indicates that it claims to have authority over a part of the DNS namespace. As long as the DNS server is properly configured with the required SOA record, Mac OS X v10.6 will detect this SOA record and automatically use this server to look up all host names in the domain.
Also, if you have time, you might want to check what mDNSResponder is actually doing by enabling logging; the man page describes the process in more detail:
LOGGING
There are several methods with which to examine mDNSResponder's internal state for debugging and
diagnostic purposes. The syslog(1) logging levels map as follows:
Error - Error messages
Warning - Client-initiated operations
Notice - Sleep proxy operations
Info - Informational messages
By default, only log level Error is logged.
A SIGUSR1 signal toggles additional logging, with Warning and Notice enabled by default:
% sudo killall -USR1 mDNSResponder
Once this logging is enabled, users can additionally use syslog(1) to change the log filter for the
process. For example, to enable log levels Emergency - Debug:
% sudo syslog -c mDNSResponder -d
A SIGUSR2 signal toggles packet logging:
% sudo killall -USR2 mDNSResponder
A SIGINFO signal will dump a snapshot summary of the internal state to /var/log/system.log:
% sudo killall -INFO mDNSResponder
http://developer.apple.com/library/mac/#documentation/Darwin/Reference/ManPages/ man8/mDNSResponder.8.html
I suspect in this case packet logging might be most informative.
Maybe you are looking for
-
How can I get my Music Library on my new laptop?
The old computer I had iTunes on crashed, and I can't use it anymore. I have purchased a new laptop, and I would like all of my music back. How can I transfer my iTunes music library to my new laptop? I tried to sync my iPhone to my new laptop, but i
-
Can a 24" iMac run my 23" HD Display?
Hi, I have an MacBook Pro and an external 23" HD display that I connect it to at home. I am thinking of getting a 24" iMac, since my MacBook has a hard time running all my photos. Is it possible to run the display with the iMac so I have two displays
-
Snow Leopard - Windows 7 - Parallel Desktop 5
I have read and read on this topic but can't find what I am looking for. I have a MacBook Pro 13 inch 2.53 ghz 4 gb ram 500 gb hard drive. What should I get windows 7 32 bit or 64 bit? What are the pros and cons?
-
UK apps wont work on USA Blackberry!!!
Can anyone help. I bought playbook in USA, bought it back to UK because i thought it might be better than IPAD! Thing is i search on playbook for UK apps and it wont find any. Keeps takling me back to USA app site. Does anyone else know why or wh
-
Drop in's not playing back until 'stop/start'
Morning all, Anyone else having problems playing back a drop in on an audio track? I'm finding that if I cut into an audio tack, record a new section and drop it into the bar or so that I'm replacing, when I come to play back the result it plays the