Mutlilevel Controlling in xRPM 4.0 and using ECC 5.0

Hi Guys,
Is there any way that i can have the Multilevel Controlling functionality with xRPM 4.0 and ECC 5.0. Please let me know your thoughts.
Thanks & Regards,
Gopi
Message was edited by:
        GBS-SO Accenture
Message was edited by:
        GBS-SO Accenture
null

Thank you very much for the quick response.
Given that information we were able to look elsewhere for the issue.
The problem arose when we were trying to execute the 0RPM_PM01_Q0113 Risk/Reward query. We would get a "No Data" message.
We have now investigated the filtering variables and that has taken us to the OS_PRJ2 exit.
After reviewing the documentation for this exit, our thought now is that our problem is related to Roles.
Thanks again!!

Similar Messages

  • XRPM 4.0 and use of table RPM_PROJECT

    We are in the process of implementing BI Content for xRPM 4.0 and have encountered a problem that is related to DataSource  0RPM_PROJ_TEXT .
    When we try to load the information via the DataSource we get no data.
    The DataSource does its extract using Function RPM_PROJ_TEXT_EXTRACT. In that function, it appears that there must be entries in table RPM_PROJECT in order to obtain any results. Our table is empty.
    I have been told that table RPM_PROJECT is no longer being used in xRPM 4.0.
    I would appreciate it if somebody could confirm the use of this table.
    We are using BI Content 7.0.3 SP9.
    Edited by: rs green on May 23, 2008 8:29 PM

    Thank you very much for the quick response.
    Given that information we were able to look elsewhere for the issue.
    The problem arose when we were trying to execute the 0RPM_PM01_Q0113 Risk/Reward query. We would get a "No Data" message.
    We have now investigated the filtering variables and that has taken us to the OS_PRJ2 exit.
    After reviewing the documentation for this exit, our thought now is that our problem is related to Roles.
    Thanks again!!

  • Using a Meter control in LV Touch Panel, and using shared variables that are custom controls.

    I Just started using LV touch Panel module with an NI TPC-2106.
    I have two differenct problems:
    1) I was planning on using the "Meter" control quite a bit. I can set up the meter exactly how I like on the host PC, but on the touch Panel computer it seems to ignore my adjustments, mainly the start and end of the scale - i.e. I would like control to run from 0 to 360 with 0 straight up, using the entire circle. However, on the Touch panel computer it always puts 0 at about 7 o'clock and 360 at about 5 o'clock. I have also tried adding markers to no avail.
    2) I am communicating with a compact fieldpoint controller. I can creat a shared variable that is a simple double with no problems. However, I have some shared variables that use a custom control for the variable type - bascially a cluster with a couble doubles, a time stamp, and an enumeration. It lets me drag the shared variable into my diagram, but it seems to ignore it when I run it.

    Ipshita_C,
    - I am using LV 8.6.1f1and LV Touch Panel 8.6.1.
    - I have attached a simplified VI that shows how I want to use the meter. Notice that the placement of the endpoitns does not work correctly on the touch panel, and that it ignores the arbitrary markers that I placed.
    - I also have included an XY graph control that displays on the TPC with margins around the graph area that I removed from the graph control.
    - For the shared variable, it appears to be an issue related to the touch panel, not fieldpoint. I found another thread in this forum that mentioned that clusters containing Enumerations do not work in shared variables on the touch panel. I changed the enumeration to an integer and it now works fine.
    In general, there seem to be a disappointing number of limitations in the touch panel implementation. My biggest concern is that I have not found any documentation from NI that lists these limitations. I seem to have to try things out and see what works and what does not work. Can you point me to a comprehensive list of touch panel modules limitations?
    Attachments:
    test 2.vi ‏10 KB

  • How do I use the time capsule to share itunes music between multiple apple devices? Also, is it possible to control the music on one device using another, and how do you set this up?

    How do I use the time capsule to share itunes music between multiple apple devices? Also, is it possible to control the music on one device using another, and how do you set this up?

    unless i'm missing something, i think you got mixed up, this is easy google for walk throughs
    i'm assuming this is the new 3tb tc AC or 'tower' shape, if so, its wifi will run circles around your at&t device
    unplug the at&t box for a minute and plug it back in
    factory reset your tc - unplug it, hold down reset and keep holding while you plug it back in - only release reset when amber light flashes in 10-20s
    connect the tc to your at&t box via eth in the wan port, wait 1 minute, open airport utility look in 'other wifi devices' to setup the tc
    create a new wifi network (give it a different name than your at&t one) and put the tc in bridge mode (it may do this automatically for you, but you should double check) under the 'network' tab
    login to your at&t router and disable wifi on it
    add new clients to the new wifi network, and point your Macs to the time machine for backups

  • I have just dowloaded the icloud control panel on my PC and i am am able to see everything that has been pushed to icloud from my ipad. However i cannot see my email. i can send from the computer using icloud, but i do not see any mail that is being rec.

    i have just dowloaded the icloud control panel on my PC and i am am able to see everything that has been pushed to icloud from my ipad. However i cannot see my email. i can send from the computer using icloud, but i do not see any mail that is being received by my ipad, which is set up with my mail server. What haven't i checked lol?

    turn your ipad off by holding the sleep wake button for 5 seconds and slide to turn off then turn it back on and the apps should be finished and if the apps didnt finish just redownload them

  • I plug my computer into my stereo and use the remote app on my iPhone to control it. How can I control my wires iPad with the remote app on my iphone when it is plugged into the stereo? they are different iTunes accounts.

    I plug my computer into my stereo and use the remote app on my iPhone to control it. How can I control my wires iPad with the remote app on my iphone when it is plugged into the stereo? they are different iTunes accounts.

    I think this is probably a sign that your network could be better than it is.
    Intermittent problems are often a result of interference. Interference can be caused by other networks in the neighbourhood or from household electrical items.
    You can download and install iStumbler (NetStumbler for windows users) to help you see which channels are used by neighbouring networks so that you can avoid them, but iStumbler will not see household items.
    Refer to your router manual for instructions on changing your wifi channel or adjusting your multicast rate.
    There are other types of problems that can affect networks, but this is by far the most common, hence worth mentioning first.

  • How to create and use Webservice controls using WSDL in weblogic portal10.3

    Hi All,
    I have WSDL , How to create webservice controls using the WSDL in weblogic portal 10.3 and use those controls to invoke those webservice methods?
    please give me the documents links for this.
    Thanks
    Venkata Sarvabatla

    As far as I remember, Controls can be called only from Pageflows, BackingFiles, Another Control (Like control calling another control) etc. In pageflow we use annotation @Control and give control classname and a varialbe for that. I am pretty sure this annotation may not work from normal java class and in your case a JAVA JSR Class.
    If you installed the samples, refer the samples from WLS: C:\beawlp103\wlserver_10.3\samples\server\examples\src\examples\webservices. They have lot of fully ready to work samples with instructions. I used clientgen ant task. But you can use standard SUN JDK Command "wsimport" also to generate the java files from the WSDL. Open any command prompt. If java is in classpath, just run wsimport and that should give an idea.
    Goud

  • Using a control as both an indicator and control

    Hello,
    I have been search and reading for a few hours now and have finally decided to post. I fear I am not using the correct terms because I am fairly new at LabView.
    I currently trying to build a user interface that uses 9 different tabs [I am using the same tab structure as in the labview example code]. There is a set of variables that will need to be on 3 of these tabs in similar form. These variables include:
    2 boolean controls
    1 boolean indicator
    1 string indicator
    12 numeric indicators
    I would like to have all of these values be the same on the separate tabs at the same time.
    For example if I press one of the boolean controls, that same boolean control should now be activated on the other tabs as well.
    If it would be possible, please do point me in the right direction of how to go about doing this. (Also the proper terminology)
    Many Thanks,
    Buffalo960 

    tbob wrote:
    I don't think you can have the same instance of controls and indicators on separate tabs.  Two options:
    1.  Create separate controls on each tab.  Put code such that if any control or indicator in the list is changed on any tab, the other similar ones get changed programatically.  You can do this with an event structure and local variables or property nodes.  Lots of programming.
    I don't think that it will be a lot of programming. For example: if he has 5 controls and want to keep all of them synchronized, with only one Case of the Event Structure he can do the job, setting the 5 controls to trigger that Case when "Value Change" and use the Event Node "NewVal" to write the same value for all controls (including the control that triggered the event, but with a code this size it will not be a big deal to write the information a again to the same control).
    Thanks
    Dan07
    Attachments:
    Multiple Controls.vi ‏39 KB

  • What is the use of control breaks in reoprts?  and how can we use them?

    hello all
    what is the use of control breaks in reoprts? and how can we use them in reports?

    use F1 on AT in a program.
    You get this
    Control break with extracts
    - AT NEW f.
    - AT END OF f.
    - AT FIRST.
    - AT LAST.
    - AT fg.
    Control break with internal tables
    - AT NEW f.
    - AT END OF f.
    - AT FIRST.
    - AT LAST.
    Each of these have a link to explain in detail what you are asking.

  • Install Grid Control and use repository within a DataGuard configuration

    Hello,
    I need some information if anyone has experience in the following
    We have severel database running in DataGuard standby configuration.
    I want to install OMS 11.1 and use the repository in a primary and standby configuration.
    My configuration will look like this:
    host 1     Primary Repository database
         OMS service 1
    host 2     Standby Repository database
         OMS service 2
    During normal operation i want to have 2 OMS services running.
    Whenever a failover is necessary, i want to active my standby database and run OMS service 2.
    Can this be a working configuration?
    Any help is appreciated.
    Regards,
    Ben

    Hi.
    As far as I know, the dbconsole installed with the Oracle database applies for only one database on one server. The information accessed by the dbconsole relies within the sysman schema inside the actual database. For a database environment with 10 databases, it is possible to install grid control and manage all these databases despite version and OS. And I think that grid is a good solution to such an environment.
    The grid installation itself is a application server installation, and I suggest if possible that you separate the rdbms server and the server that contains the grid control.
    The repository database the grid control uses can either be installed in the 10g environment or in the grid control environment (server). You can place the repository in a new database in a separate ORACLE_HOME from the actual grid control application server.
    Good luck.
    rgds
    Kjell Ove

  • Could someone tell me how to control a small dc motor by using labeled and a NI 6008 daq. The motor is adjustable by using a pot that ranges between 0-V if that is of any additional benefit

     Could someone tell me how to control a small dc motor by using labeled and a NI 6008 daq.  The motor is adjustable by using a pot  that ranges between 0-V if that is of any additional benefit.

    Read the second thread you have a link to. While both of these will produce PWM signals, the first one is a couple of orders of magnitude too slow to do anything useful in control the speed of a motor, what you would see would be the motor run at the full speed, then stop for a period, then run at full speed, rather than at the "average of on and off"  as the Pulse Widths will be very long relative to the motor's response. The second one has a better chance, IF all you want to do is run the motor. If there is any other calculations ...   Look at both and try and get an understanding of what they are doing. For PWM speed control of a motor you really need a pretty fast pulse width, and probably some filtering to smooth out the resulting "harsh" waveform, giving you the "average" voltage resulting from the PWM.
    Putnam
    Certified LabVIEW Developer
    Senior Test Engineer
    Currently using LV 6.1-LabVIEW 2012, RT8.5
    LabVIEW Champion

  • Dreamweaver Site Publish_CLICK TO ACTIVATE AND USE THIS CONTROL ERROR WHEN PUBLISHING

    Hi all, recently after publishing and testing my site I
    noticed where my flash files are located boxes around the files
    with a "CLICK TO ACTIVIATE AND USE THIS CONTROL" pop up thing
    occur, when I hover over the flash parts. Can you please tell me
    why this occurs and how to remove it? It works fine on safari but
    using internet explorer, there seems to be a problem.
    hope u can help

    It's IE-only behaviour as a result of changes Microsoft made
    earlier this
    year to their browser, regarding how Active Content (Flash,
    Quicktime etc)
    is handled, after losing a high profile court case.
    http://blog.deconcept.com/2005/12/15/internet-explorer-eolas-changes-and-the-flash-plugin/
    Background:
    http://en.wikipedia.org/wiki/Eolas
    See also
    http://www.adobe.com/devnet/activecontent/
    If you're running Dreamweaver 8.0.2, the fix is already built
    into DW's
    interface.
    If not, try
    http://blog.deconcept.com/swfobject/
    Regards
    John Waller

  • Click to activate and use this control

    hi,
    I have problem, when i run my .swf in browser i am getting
    one message that " Click to activate and use this control"...is
    there any solution to enable this message(alt tag)..

    monuu wrote:
    > i am really sorry...actually after i posted the message
    i searched in this forums for the solution...after i saw them i
    realised,...
    >
    > I am sorry
    No need to be sorry. Will enroll you for two weeks as sex
    slave and all will be
    forgotten and forgiven.
    Best Regards
    Urami
    !!!!!!! Merry Christmas !!!!!!!
    Happy New Year
    <urami>
    If you want to mail me - DO NOT LAUGH AT MY ADDRESS
    </urami>

  • Click To Activate and Use this control message in IE

    I have this message popping up only on the IE "Click To Activate and Use this control message".
    I googled it and there are a few solutions but somehow they did not really work for me.
    Is really that complicated to get a fix on that message.
    Does anyone have a good working solution?

    Hi,
    You may want to try any one of the following to know and get rid of the message you are talking about
    http://www.kirupa.com/developer/flash8/flash_fix.htm
    http://www.howtocreate.co.uk/noclicktoactivate.html
    Thanks!
    ps: please mark this post as Answered if this is of help to you

  • Using Mackie Control with Logic Pro 7 and Yamaha O1X

    I currently own a Yamaha O1x which is a mixer/control surface/audio interface that I use with Logic Pro 7. I am planning on selling the O1X and replacing it with the Mackie Control Universal as my DAW controller and using the Apogee Ensemble as my audio interface. I already have purchased the Mackie Control Universal and would like to begin using it instead of the O1X as my DAW controller, but while I am waiting for the Apogee Ensemble to be released I still need the audio interface capabilties of the O1X. The O1X uses Yamaha's MLAN protocol to connect to the G5. MLAN is a firewire interface that can transmit both audio and midi. Does anyone have a suggestion for a work-around solution so that I can use my Mackie Control Universal (which connects via midi cable) and only use the audio capability but not the control surface of the O1X via the firewire connection? I haven't been able to figure my way through this one and see if it is possible. I have already tried having them both hooked up at the same time, and the Mackie Control seemed to work fine but the audio on the O1X didn't seem to be connecting and functioning properly. I appreciate any help as I am anxious to use my Mackie Control.
    Thank you!

    You need to connect only the Audio and not the MIDI between your 01x and Mac. You can achieve this in mLan Graphic Patchbay-connect the cables between the Nodes in Audio part of a Graphic Patchbay, connect the Wordclock but do not make any MIDI connections. this way it should work as you want. the other way is to Make your regular connection from mLan Autoconnector and disable the MIDI ports that are dedicated to control the DAW by 01x by some freeware utility (01x uses port 1 for that...)
    As this is quite 01x specific, please visit 01xray.com/forums where you will find more help, or send me PM.
    As Apogee enssemble is expected to have great features, I would rather recommend the i88x instead of Enssemble (i88x has two Mic preamps-the best Yamaha produces (derived from Dm2000)VERY good converters (mLan is known for low jitter and it was tested with Rosseta by a mate from 01x forum who said (he tested it in store with other people) that i88x sounded better-may believe it or not...).The mLan Graphis Patchbay application allows you to patch connections between mLan devices and computer -very flexible. 01x already does almost the same as Mackie control and it is for almost the same price.... But maybe you are pi_ssed of waiting for new mLan drivers? I am just speculating....

Maybe you are looking for