Mutliple ECC Instances to Single Instance CRM different client

If we have multiple QAS instances of ECC, can we use one instance of CRM and use multiple clients?
i.e.
ECC Server QA1 Client 100 communicating with CRM QAx Client 100
ECC Server QA2 Client 200 communicating with CRM QAx Client 200
One consultant we are dealing with says the middleware only supports one-to-one instances, and one says it "should" work.
Has anyone tried this before?
We created a separate test configuration of ECC but don't want to create a new CRM instance just to test.

Note: Versions - ECC 6.0 & CRM 7.01

Similar Messages

One instance tho different client servicing. EMIL-2002-06-27

Hello friends!
I have the question. Can an oracle instance to be used as Shared And Dedicated server. What I need is one database for some clients to be served by shared server for other from dedicated server. I'm not shure if I use different listeners and in configuring them as dedicated or shared. Does it depend from initializing parameters in init.ora, and does it depend from initializing parameters when database is created
Best regards

Hi All,
I had the same problem bei EHP4 upgrade, I could not start the shadow instance. see
Erro Message "
ERROR => shmget(10162,86036728,2016) (12: Not enough space) [shmux.c)
So I change the #em/initial_size_MB =4096 to
#em/initial_size_MB =2048.
Then the shadow instance could come up.
My regards to Venka for the tipp.
Cheers
Egwim

EBS R12 - Multipl Instance using Single Databse ( with Different SID )

Hi,
Is it possible to create Multiple R12 EBS instance (i.e. TEST and DEV ), in to Single Database ( using same database binary ).
Or Can these different EBS instance , configured with Single Database using differant Oralce SID ( means creating Multiple databases with Single binary )
Please guide,
Thanks

Is it possible to create Multiple R12 EBS instance (i.e. TEST and DEV ), in to Single Database ( using same database binary ).No.
Or Can these different EBS instance , configured with Single Database using differant Oralce SID ( means creating Multiple databases with Single binary )No -- Each instance/database should have its own ORACLE_HOME.
Thanks,
Hussein

Database instance in different host, ECC 6.0 installation

Hello All,
i want to install ABAP distributed system (ECC 6.), unfortunately in step Database instance installation i got only one option - local host name. I need to put database to other server...
Does anybody has experience with distribiuted ECC 6.0 ABAP system installation? How can i distribute sap instance and DB instance to different servers (sapinst is not offer this option, only for java systems)?
Thanks a lot.

Thank you very much Michael,
your advise resoved my problem, after using sapinst with parameter " DB host name" instalation of DB instance executed correctly. In default.pfl file i have now as SAPGLOBALNAME db host name.
I am facing at the moment with other problem during db instalation:
FCO-00011 The step doGrantServiceRights with step key
FSL-06002 Error 1060 (The specified service does not exist as an installed service.) in execution of a 'SyWinGetSecurityDescriptor' function, line (1296), with parameter (Error in getting security descriptor for 'MSSQLSERVER' NT service).
Is it known problem to you? if so, how did you resolve it?
Thanks a lot.

Multiple NW instances of different versions on same server

Hello,
Our current landscape has two NW 7.2 Java AS instances installed on a single server. This solution works well for us, as one instance functions as our Dev server and the other functions as the QA.
I am looking to upgrade to NW 7.3 EP1. Is it possible to have different NW instances at different versions on the same machine? For instance:
NW 7.2 DEV (port 50000)
NW 7.2 QAS (port 50200)
NW 7.31 PRD (port 50400)
I've already attempted to install NW 7.31 Java as a New and additional installation on the server. Both methods have failed so far. I haven't dug too deeply into the logs yet as I wanted to get feedback from the community first.
In summary, is it possible to have different versions of NW Java running on the same machine? If so, what is the best practice and process for installing the new NW instance?
Thanks,
Greg

In summary, is it possible to have different versions of NW Java running on the same machine? If so, what is the best practice and process for installing the new NW instance?
Yes, it is possible. You need to make sure that the hardware has sufficient resources (CPU, RAM, Disk space, etc) to accommodate a new instance, the system numbers and SID's are unique and the OS and DB are supported for the new system.
Regards
RB

How to connect different clients of same SAP Instance

Hi,
I have a question abour CPS 7, Basic- / Free of Charge Version
I know that this version is restricted to have only one SAP Instance per Isolation Goup, but how about different clients of the same Instance ?
Is it necessary to create an Isolation Group for each client of the same instance ?
We actually have 1 isolation group with 1 Instance and 1client .
Trying to create a second XBP Connection to another client fails then saving the changes with error:
"JCS-102120: SAP System DI1.DI1_045 should be isolated but is not. Show error details"
I didnt find a concrete statement in the Installation - and in the Admin Guide.
Regards
Frank

Hi Frank,
This is correct, there is one client per isolation group. The free version works similar in this respect to SM36/SM37: jobs are defined in each client individually and independently.
Regards,
Anton.

Re: Running weblogic multiple instances on different ports

Hi,
I am planning to run multiple weblogic instances on different ports on the
same machine.
Is it possible ? If so, how ?
Details:
I am using IIS on the same machine. I am currently running weblogic on
7001 and 7002(ssl).
I dont how to run multiple instances. Please help me or guide me where I
can get documentation.
These two instances have to refer two different set of code bases ...
Please point me where I can more details.
Thanks in advance.
Sreedhar V

Is it possible for the two instances on the same machine to participate in
the same cluster? I believe servers in a cluster must share the same port
(which is also used for multicasting). Does a virtual IP address need to be
configured?
"Per Jessen" <[email protected]> wrote in message
news:[email protected]..
>
>
Sreedhar Vankayala wrote:
Hi,
I am planning to run multiple weblogic instances on different ports on
the
same machine. Is it possible ? If so, how ?Assuming you are using WLS6.x, simply define as many servers as needed andgive
them different ports to listen to. This is easily accomplished using theWLS
Admin Console.
Then start individual weblogic processes using this config file.
regards,
Per Jessen, Zurich.

XI to be called by an R3 instance but 3 different client

Hi guys, anybody has experiment with calling 1 XI (XI development) by 3 different client of R3 (but with the same instance / system number).
I have tried creating 3 different business system in SLD using only one Technical system but it does not work. Anybody have any idea? All advices and inputs would be very appreciated. Thanks guys.

Hi,
If you are trying to send the IDOC from XI to the R3 system, then you will need the RFC destination in SM59 in XI. And this should be created for every client of the r3 system.
The client details are given under Log On Data in the RFC destination.
In the case of R3 , as you have multiple Clients, you wil have one RFC destination on each client pointing to your XI box. The details in all 3 will be the same, but, remember one on each R3 Client.
If you have done the Adding of Clients to the Tech SYstem, create the Business System as WEB AS ABAP for each R3 client. While creating the Business System, you wil select the Technical System and then Select the CLient / logical system of the R3 system . The business systems have a 1:1 relationship with the Clients of the r3 system.
If you have also done this, then can you please elaborate what the issue you are facing is?
Regards,
Bhavesh

MSSQL problem SQL instances on different Ports.

Hi,
I have a problem connecting to sql instances on different ports.
Example:
I have an sql databaserver = DATABASE
1st instance on this server = instance1 (running on port 1160)
2nd instance on this server = instance2 (running on port 1260)
If I want to connect to instance1 - i create the following conn.info line :
MSSQL_SERVER = DATABASE\instance1
But for some reason, I doesn't connect to the instance1... I can do a dataconnection to "MSSQL_SERVER = DATABASE", but can no redirect it to "DATABASE\instance1"
Ideas ?
Thanks,
Jorgen

Is it possible for the two instances on the same machine to participate in
the same cluster? I believe servers in a cluster must share the same port
(which is also used for multicasting). Does a virtual IP address need to be
configured?
"Per Jessen" <[email protected]> wrote in message
news:[email protected]..
>
>
Sreedhar Vankayala wrote:
Hi,
I am planning to run multiple weblogic instances on different ports on
the
same machine. Is it possible ? If so, how ?Assuming you are using WLS6.x, simply define as many servers as needed andgive
them different ports to listen to. This is easily accomplished using theWLS
Admin Console.
Then start individual weblogic processes using this config file.
regards,
Per Jessen, Zurich.

IPC/VC: Knowledgebase/KB of ECC is not shown in CRM

Hi,
we would like to use the Variant Configuration in CRM.
Today we are using already the IPC in a standalone environment with an external system (IPC 5.0, the external system is using the IPC in the Java environment of ERP). From the same ECC System we would like to download now the knowledge bases to reuse them in CRM 7.0. All knowledge bases and runtime environments are already available. When I download the object SCE (with certain filters), I can see all those entries in table COMM_CFGKB in CRM.
Anyhow, when checking the material in CRM (e.g. commpr01 or WebUI), no knowledge base is shown!
The table COMM_CFGKB has exactly the same entries as ECC (Active = T, KB Usage 10, KBOBJNAME and Version filled etc.), but anyhow it is not shown at all in CRM. As these knowledge bases are very huge, I have tested also a very small and easy one. This one is getting downloaded the same way and has the same entries in table COMM_CFGKB and it is also visible in commpr01.
So my assumption is that the other KBs are not 100% correct. When checking them in ECC (cu36) I get many warnings and errors. Anyhow, they were downloaded to CRM (but won`t be shown). Business says that these warnings/errors are OK and that the external system which uses the IPC in ECC is not having any problems.
Question: is there any chance of using a KB in CRM which has warning/errors when it was generated in ECC?
Is there any chance of manipulating the KB before it gets imported into CRM. I have found Note 1044682 which explains a BADI.
Which tables/fields do we have to manipulate so we are able to use the KB in CRM.
As mentioned: business is aware of those errors and excepts that there might be a crash in the IPC for certain combinations.
Thx
Guido

Hi Christophe,
OK, I think I understand your suggestion: you use the same IPC with your CRM as well as with the ECC system. So in CRM you just maintain the URL and a user in XCM to the "same" IPC. You mentioned that we need to download anyway the SCE. This is somehow logical as this is the base connected to CRM, but what is not clear to me is the fact, that if the SCE KB is used via ECC all SAP R/3 fields are available (like VBTYPE of the sales order where you have values like B or C). In CRM we use the same SCE KB but here these fields are not availble as the sales order transaction customizing in CRM does not contain such a field. Where is the logical link between the values which are available in IPC and the SCE?
Thx
Guido

Relationship Between ECC Customers (Contact Persons) and CRM BP

Hello,
I am new to middleware and need some help with the relationship between ECC customers/contact persons and CRM business partners.
We are transferring via bdoc this information from ECC to CRM.
Which bdoc types are used when transferring customers/contact persons? I believe it is BUPA_MAIN but am not too sure. How is the relationship between customer its contact person transferred? Is this done through BUPA_REL? I looked at the segment fields in SBDM but am not too sure how to understand the relationship...
Thanks for the help!
Regards,
Tiffanie

Thanks! With the initial load, how do I check what fields are being passed in the bdocs?
I tried to look for customer_main, customer_rel in SBDM and couldn't find it. Instead I used BUPA_MAIN and found some segments but couldn't find all the data that was being transferred (e.g. customer name, address, etc...) Where do I find all the fields contained in the bdoc?
I see them in SMW01 when I view the bdoc contents but can not find the actual structure (data fields) that are being brought in from ECC.
Thanks!
Tiffanie

Create a single delivery for different schedule lines in the scheduling agr

Hi
I want to create a single delivery for different line items with different delivery dates in the scheduling agreement, as Iam aware it is possible to combine different line items into one delivery through sales order.
Need your inputs
Aravind

Hi,
Try with below solution and see I am not confirm about this
VL01N >>> Menu outbound delivery >>> Deliver sales order
Here you put order number and selected date as your ANOTHER SCHEDULE LINE
Kapil

Can we connect 2 ECC to a single PI system.

hi ,
can we connect 2 ECC to a single PI system. here we would be using proxies in the 2 ECC.
Is it possible to enable the SProxy for both systems.
EG: ECC1< -> PI (A)<-.>APO
ECC2<-->PI (A)<-.>APO
Regards,
Praveen K
Edited by: praveen kalwa on Jul 29, 2010 5:34 PM

Yes. you can connect 2 ECCs to a single PI system.
You have to create two entries for Proxy in sm59.
Please refer the below document for the proxy configuration.
(Put 'Proxy configuration in SAP XI' in Google Search & You will get a document from saptechnical.)
If everything goes fine, from both the ECC systems you can see the PI interfaces(Transaction : SPROXY) and implement them.
Edited by: soumen patra on Jul 29, 2010 3:42 PM

CRM Production was stoped suddenly and ECC orders to replicate in CRM

Dear Experts,
Greetings!!!.
Recently Because of Hardware Migration, CRM Production was stoped suddenly. and the orders are raised in ECC. directly.
Eg: in CRM YOR1 sales order for same they have created ZOR1 in ECC and are working. now i need to replicatie the orders which are created in ECC .
What will be the Customising settings and Middleware settings for the Same please guide us.
Thanking you in anticipation,
Regards,
Sany.

You must maintain on R/3 system the table CRMPAROLTP (in SM30). Set the following parameters:
Parameter name 1: CRM_SCENARIO
Parameter name 2: INT_CHANGE_ORDER (e.g. for activating the scenario A for ZOR1 - check what you use for YOR1)
Parameter name 3: ZOR1
Parameter value 1: A (e.g. for activating the scenario A for ZOR1 - check what you use for YOR1)
And on CRM side you must maintain the same parameters in table SMOFPARSFA:
Key : R3A_SALES
Parameter name 1: INT_CHANGE_ORDER (e.g. for activating the scenario A for ZOR1 - check what you use for YOR1)
Parameter name 2: ZOR1
Parameter value 1: A (e.g. for activating the scenario A for ZOR1 - check what you use for YOR1)
Ensure that the scenarios are maintained consistently in both systems (CRMPAROLTP and SMOFPARSFA) to avoid errors.
Regards.

When it's required to share a single object in different classes????

Hi friends...
I am new to java programming language....
when it is required to share a single object in different classes???
and
please give me one example with explanation...
Thank you
regards Shree

sun_shree wrote:
Thanks for all giving reply.....
please write the constructor which is accepting reference and please,,,,,, explain......
Thanking youNo.
This will be covered in any Java textbook or tutorial. Like this one: [http://java.sun.com/docs/books/tutorial/java/javaOO/arguments.html]
After reading it and writing some code of your own to test your understanding, if you still have a specific question, post again.

Mutliple ECC Instances to Single Instance CRM different client

Similar Messages

Maybe you are looking for