Mutliple Standby's DG Broker on single server

Hi Gurus,
I have a RAC primary site with two RAC db's and i need to set single instance physical standby for them on single server with DG Broker managing them.
I have few concerns/questions.
a)if i setup dg broker for database A and the dg_broker_start=true i,e broker process already started then should i be setting this parameter for the database B also?
b)I need to create two DG Broker Configuration ,Correct?
c)Can i have one observer for both configuration observer(FSFO) ?
d)Can i run start two observer on single machine for the two separate configuration?
Please help me understand the above.
Thanks

I have a RAC primary site with two RAC db's and i need to set single instance physical standby for them on single server with DG Broker managing them.
I have few concerns/questions.
a)if i setup dg broker for database A and the dg_broker_start=true i,e broker process already started then should i be setting this parameter for the database B also?If you have two databases A & B, you have to configure broker for each database.
IF you are talking about instances like A1, A2 then you can configure broker from any one instance.
b)I need to create two DG Broker Configuration ,Correct?Yes, you need to configure.
*Step by Step How to Create Dataguard Broker Configuration [ID 984622.1]*
c)Can i have one observer for both configuration observer(FSFO) ?
d)Can i run start two observer on single machine for the two separate configuration?Provide some more information, its not clear enough, What does two separate configuration means?

Similar Messages

  • Connection Broker/RDWeb Single Server Setup.

     
    Hello, I have a quick question for understanding how this configuration works that we just setup and I want to understand if I am driving this the right way and if we configured this in the
    proper setup.
    So..
    Server 1 - RDWeb / Connection Broker
    Server 2 - RDWeb / Connection Broker
    Server 3 - Terminal Server 1
    Server 4 - Terminal Server 2
    Server 4 - Terminal Server 3
    This was setup and I am asking the team to build these server to make a highly available environment so that we can grow and move applications here in the future. I would like the team to configure
    the CB for High Availability then use our F5 to balance the Web Services. This should yield a very fault tolerant model for us, as I see it laid out and if you have suggestions or faults don’t hesitate to voice them.
    However I am getting resistance and I am unable to understand where my logic is flawed. Does the High Availability on the broker balance the web services, I am being told that they do however
    I don’t know how and I want to ensure I am operating off the correct information.
    Thank you for any insight that you can provide for me on this.

    Hi Jessica,
    Thank you for your posting in Windows Server Forum.
    As you want to configure RDCB high availability, I can say that you must have SQL server setup that can be used by RDCB server to store data. You also need to create a folder to store SQL database files. Also SQL Server Native Client is installed on all RD
    Connection Broker servers. Static IP addresses have been assigned to all RD Connection Broker servers. DNS resource records with a single DNS name have been created for all RD Connection Broker servers that will be part of the deployment.
    Please refer beneath article for more information:
    1.  RD Connection Broker High Availability in Windows Server 2012
    2.  Deploying RD Connection Broker High Availability in Windows Server 2012
    3.  Step by Step Windows 2012 R2 Remote Desktop Services – Part 2
    Hope it helps! 
    Thanks,
    Dharmesh

  • Multiple database in single server

    Hi experts,
    Please tell me how to configure multiple SID with single listener.
    I configured the DR setup of two databases in single server. Now the problem is, if I start one listener from orapm1(CRM), my data is replicating only for CRM, and if I am going to start my listener from oraPE2 user (DBM), error is coming u201C listener is already startu201D but DBM is not replicating with DR site.
    And when I stop the listener from oraPM1, and start listener from user oraPE2(DBM), my DBM is replicating properly, I want to start both in parallel with one listener.
    Right now I have only one port for both database (1527) and only one LISTENER, should I need to change the port for one server e.g DBM (primary and standby), and then change in listener files. For both side (primary and standby)
    If I am correct please let me know the steps, what precautions we need to take.
    And what change I need to do in listener file.
    2nd) Can I work on same port for both SIDs, if yes please tell me the steps.
    My CRM is working properly so I need to change in DBM part.
    I am attaching listener file from both users in same server (10.11.230.12)
    ADMIN_RESTRICTIONS_LISTENER = on
    LISTENER_PE2 =
    (ADDRESS_LIST =
    (ADDRESS =
    (PROTOCOL = IPC)
    (KEY = PE2.WORLD)
    (ADDRESS=
    (PROTOCOL = IPC)
    (KEY = PE2)
    (ADDRESS =
    (COMMUNITY = SAP.WORLD)
    (PROTOCOL = TCP)
    (HOST = 10.11.230.12)
    (PORT = 1527)
    STARTUP_WAIT_TIME_LISTENER = 0
    CONNECT_TIMEOUT_LISTENER = 10
    TRACE_LEVEL_LISTENER = OFF
    SID_LIST_LISTENER =
    (SID_LIST =
    (SID_DESC =
    (SID_NAME = PE2)
    (ORACLE_HOME = /oracle/PE2/102_64)
    pm1 listener file
    ADMIN_RESTRICTIONS_LISTENER = on
    LISTENER =
    (ADDRESS_LIST =
    (ADDRESS =
    (PROTOCOL = IPC)
    (KEY = PM1.WORLD)
    (ADDRESS=
    (PROTOCOL = IPC)
    (KEY = PM1)
    (ADDRESS =
    (COMMUNITY = SAP.WORLD)
    (PROTOCOL = TCP)
    (HOST = 10.11.230.12)
    (PORT = 1527)
    STARTUP_WAIT_TIME_LISTENER = 0
    CONNECT_TIMEOUT_LISTENER = 10
    TRACE_LEVEL_LISTENER = OFF
    SID_LIST_LISTENER =
    (SID_LIST =
    (SID_DESC =
    (SID_NAME = PM1)
    (ORACLE_HOME = /oracle/PM1/102_64)
    Thanks in advance.

    Dear Experts,
    please tell me is it ok or i need to change something else?
    this example is for only one listener, and i put both SID details in same LISTENER, or i need to change the listener name for another server. it is very confusing...
    ADMIN_RESTRICTIONS_LISTENER = on
    LISTENER =
      (ADDRESS_LIST =
            (ADDRESS =
              (PROTOCOL = IPC)
              (KEY = PM1.WORLD)
            (ADDRESS=
              (PROTOCOL = IPC)
              (KEY = PM1)
            (ADDRESS =
              (COMMUNITY = SAP.WORLD)
              (PROTOCOL = TCP)
              (HOST = 10.11.230.12)
              (PORT = 1527))
    LISTENER =
      (ADDRESS_LIST =
            (ADDRESS =
              (PROTOCOL = IPC)
              (KEY =PE2.WORLD)
            (ADDRESS=
              (PROTOCOL = IPC)
              (KEY = PE2)
            (ADDRESS =
              (COMMUNITY = SAP.WORLD)
              (PROTOCOL = TCP)
              (HOST = 10.11.230.12)
              (PORT = 1528))
    SID_LIST_LISTENER =
      (SID_LIST =
        (SID_DESC =
          (SID_NAME = PM1)
          (ORACLE_HOME = /oracle/PM1/102_64)
    STARTUP_WAIT_TIME_LISTENER = 0
    CONNECT_TIMEOUT_LISTENER = 10
    TRACE_LEVEL_LISTENER = ON
    SID_LIST_LISTENER  =
      (SID_LIST =
        (SID_DESC =
          (SID_NAME = PE2)
          (ORACLE_HOME = /oracle/PE2/102_64)
    Rishi

  • SharePoint Server 2013 single server installation licenses and system requirements

    We are thinking of setting up a SharePoint Server 2013 for the following features to be accessed by our test team (<100 users)
    Our requirements are as follows - 
    Total user access <100 users(starts with 50 and may be go upto 100)
    Mainly Access to TeamSite(Document library), WiKi, BI reports view(SSRS Reports integration)
    We have a Visual Studio Ultimate license that covers SQL Server 2012 and Share Point server 2013.
    We have also got a Amazon EC2 machine access to create a Xlarge box with Microsoft recommended Cores, Memory, storage for SINGLE INSTALLATION of SharePoint Server 2013 and SQL server database on Windows Server 2012 
    My queries are as follows
    Are the licenses above sufficient to go ahead with setting up the SP Server? or do i need any other licenses ?
    I would like to create local LDAP in amazon without connecting to the company active directory. Would this be possible? We have users from other locations(different countries) providing services to our company and we would like them to access this portal
    to share and access docuemnts without any network issue etc..
    Are there any known firewall issues with EC2 machines for share point deployment
    System requirements for single server installation (with or without BI reports)
    Please note this implementation is only for internal use by the test team and is not critical. Not a production implementation. 
    Is there any better solution?
    Much appreciate your help 
    Thanks
    Vara

    MSDN subscription licenses for SharePoint aren't, as far as i know, for use as production devices. This means that whilst you can use it for testing and development you can't use that license for the SharePoint server that you'll all be using.
    As such I think you will need to buy a SharePoint 2013 server license. The same goes for SQL, Windows etc.
    There is also the question of user licenses, ie. CALs. I don't remember if those come included as part of an MSDN subscription.
    2) Possibly. As long as Amazon can host a domain for you it should be possible.
    3) Pass. Microsoft prefer you to use Azure and most of my training and experience is with that.
    4) High. 4 cores, 24GB of RAM minimum.
    http://technet.microsoft.com/en-us/library/cc262485.aspx#hwforwebserver
    You'll either need a 2XLarge or a memory orientated box, in which case you won't have much storage space.
    Internal team infrastructure is still important. If you're using it enough to make it worth having then you need it there and running.
    Have you considered using Office 365?

  • Install AD / SQL Server 2012 and SharePoint 2013 on a single server as Development Environment

    Hi All,
          I'm planning to prepare a SharePoint 2013 development environment. The current idea is to install Domain controller, SQL Server 2012 and SharePoint 2013 all on a single server. Even though this is for development purposes,
    would there be any limitations specially when it comes to SP 2013 functionalities according to your experience?
    Some articles i referred.
    http://sharepoint-tutorial.net/post/2012/07/18/install-sharepoint-2013-domain-controller.aspx
    http://social.technet.microsoft.com/Forums/en-US/f438c9a6-02e8-43d3-9963-7a0608f0b961/sharepoint2013-on-domain-controller
    Thanks,
    Dilip

    Hi
    i understand this is a sandbox environment but you should be able to install everything.
    http://sharepoint-tutorial.net/post/2012/07/18/install-sharepoint-2013-domain-controller.aspx
    Hope this helps. Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread.

  • One Search service application for multiple web applications in a single server

      We are planning to host 17 Web applications in a single Server. Do I need to create search service application for each web application or I need to create one  Search service application , create a Content source for each web
    application and create a Result source for filtering. Which is the best approach. And which approach takes more RAM memory.
       In my application I am using Search web part, "Recently Changed Items", "Popular Items" web parts. when I created only one one  Search Service application for all web applications and using Result sources ,
    I am not getting the results. What could be the problem.

    Hi,
    One SSA is ok, but you should think about access rights. If the access is clear cut between all the web apps you should be ok with one SSA. Multiple result sources limiting on content source also works, but could easily be bypassed.
    Multiple SSA's will eat up RAM/CPU like a mother :)
    As for popular etc.. it could be due to how those sources are set up, but haven't investigated or tested this much.
    Thanks,
    Mikael
    Search Enthusiast - SharePoint MVP/MCT/MCPD - If you find an answer useful, please up-vote it.
    http://techmikael.blogspot.com/
    Author of Working with FAST Search Server 2010 for SharePoint

  • Multiple Domains in a Single Server

    Hi:
    I have a requirement where two domains (at this time) need to be set-up in single server.
    Each domain need to have a Admin Server , OSB, SOA, OSR and OER as managed servers and each runs in different port.
    Each domain has it own schema, but shares the same instance and database
    Is it possible to run both domain at same time, (i-e) i should be having both the servers up and running and should be able to open the consoles of Admin server and managed servers for each of the domains configured?
    Regards,
    RK

    Is it possible to run both domain at same time, (i-e) i should be having both the servers up and running and should be able to open the consoles of Admin server and managed servers for each of the domains configured?That should be no problem... Use different port numbers, different schemas and different domain directories... You can share the same product installation...
    Cheers,
    Vlad

  • Multiple Oracle Products on Single Server

    Can we install Multiple Oracle Products for Development and Testing on a Single Server?
    Oracle Database 9i Enterprise Edition.
    Oracle 9i Application Server
    Oracle Applications 11i (Financials GL,HRMS PAYROLL)
    Oracle Discoverer 4.x
    Oracle Internet Developer Suite (Forms Server, Reports Server,
    If yes,
    Do they need to be in separate ORACLE_HOME or same ?
    Also what should be the sequence of Install, i.e. what should be installed first?

    The following products needs to be in their own Oracle Home:
    Oracle Database 9i Enterprise Edition. --> in its own O_H
    Oracle 9i Application Server --> in its own O_H (assuming this is 1.0.2.2 or 9.0.2)
    Oracle Applications 11i (Financials GL,HRMS PAYROLL) --> in its own O_H
    Oracle Discoverer 4.x --> in its own O_H (this is a 806 based product btw)
    Oracle Internet Developer Suite (Forms Server, Reports Server) --> This can either be in its own O_H or in the O_H which has 1.0.2.2 Oracle9i Application Server.

  • Multiple Instances of OEDQ on a single server

    Hi,
    I am running a Linux Machine (Linux 2.6.18-308.1.1.0.1.el5), on which I have the latest version of Oracle 11g release 2 installed.
    I have an instance of oracle Enterprise Data Quality tool running on an apache-tomcat-7 server. Port 8080
    Now I have a requirement of Installing another instance of OEDQ on the same server, but a different APACHE_HOME directory and a different Port Number (8081).
    So the question is, Can we install multiple instances of OEDQ on a single server?
    If so, what are the prerequisites to be maintained.
    I did my bit of tries, but ended up having issues with some java errors.
    I have posted the error message below.
    SEVERE: Context initialization failed
    *org.springframework.beans.factory.BeanCreationException: Error creating bean with name 'casemanager' defined in class path resource [conf/casemanagement.xml]: Cannot resolve reference to bean 'casedao' while setting bean property 'caseDAO';*
    The complete Error Log in the Catalina.out file is pasted below.
    INFO: The APR based Apache Tomcat Native library which allows optimal performance in production environments was not found on the java.library.path: /u100/app/PCEXDB/orpcexmt/oracle/loqate:/usr/java/packages/lib/amd64:/usr/lib64:/lib64:/lib:/usr/lib
    May 13, 2013 12:50:08 AM org.apache.coyote.AbstractProtocol init
    INFO: Initializing ProtocolHandler ["http-bio-8081"]
    May 13, 2013 12:50:08 AM org.apache.coyote.AbstractProtocol init
    INFO: Initializing ProtocolHandler ["ajp-bio-8010"]
    May 13, 2013 12:50:08 AM org.apache.catalina.startup.Catalina load
    INFO: Initialization processed in 792 ms
    May 13, 2013 12:50:08 AM org.apache.catalina.core.StandardService startInternal
    INFO: Starting service Catalina
    May 13, 2013 12:50:08 AM org.apache.catalina.core.StandardEngine startInternal
    INFO: Starting Servlet Engine: Apache Tomcat/7.0.29
    May 13, 2013 12:50:08 AM org.apache.catalina.startup.HostConfig deployWAR
    INFO: Deploying web application archive /u100/app/PCEXDB/orpcexmt/oracle/OEDQ2/apache-tomcat-7.0.29/webapps/dndirector.war
    May 13, 2013 12:50:13 AM org.apache.catalina.startup.TaglibUriRule body
    INFO: TLD skipped. URI: http://struts.apache.org/tags-tiles is already defined
    May 13, 2013 12:50:13 AM org.apache.catalina.startup.TaglibUriRule body
    INFO: TLD skipped. URI: http://struts.apache.org/tags-html is already defined
    May 13, 2013 12:50:13 AM org.apache.catalina.startup.TaglibUriRule body
    INFO: TLD skipped. URI: http://struts.apache.org/tags-bean is already defined
    May 13, 2013 12:50:13 AM org.apache.catalina.startup.TaglibUriRule body
    INFO: TLD skipped. URI: http://struts.apache.org/tags-logic is already defined
    May 13, 2013 12:50:13 AM org.apache.catalina.startup.TaglibUriRule body
    INFO: TLD skipped. URI: http://struts.apache.org/tags-nested is already defined
    May 13, 2013 12:50:13 AM org.apache.catalina.startup.TaglibUriRule body
    INFO: TLD skipped. URI: http://struts.apache.org/tags-bean is already defined
    May 13, 2013 12:50:13 AM org.apache.catalina.startup.TaglibUriRule body
    INFO: TLD skipped. URI: http://struts.apache.org/tags-html is already defined
    May 13, 2013 12:50:13 AM org.apache.catalina.startup.TaglibUriRule body
    INFO: TLD skipped. URI: http://struts.apache.org/tags-logic is already defined
    May 13, 2013 12:50:13 AM org.apache.catalina.startup.TaglibUriRule body
    INFO: TLD skipped. URI: http://struts.apache.org/tags-nested is already defined
    May 13, 2013 12:50:13 AM org.apache.catalina.startup.TaglibUriRule body
    INFO: TLD skipped. URI: http://struts.apache.org/tags-tiles is already defined
    May 13, 2013 12:50:14 AM org.springframework.web.context.ContextLoader initWebApplicationContext
    INFO: Root WebApplicationContext: initialization started
    May 13, 2013 12:50:14 AM org.springframework.context.support.AbstractApplicationContext prepareRefresh
    INFO: Refreshing com.datanomic.director.startup.WebApplicationContext@2dfe88b8: display name [Root WebApplicationContext]; startup date [Mon May 13 00:50:14 CDT 2013]; root of context hierarchy
    May 13, 2013 12:50:16 AM com.datanomic.director.startup.WebApplicationContext loadBeanDefinitions
    INFO: Spring bean loading complete.
    May 13, 2013 12:50:24 AM org.springframework.web.context.ContextLoader initWebApplicationContext
    SEVERE: Context initialization failed
    org.springframework.beans.factory.BeanCreationException: Error creating bean with name 'casemanager' defined in class path resource [conf/casemanagement.xml]: Cannot resolve reference to bean 'casedao' while setting bean property 'caseDAO'; nested exception is org.springframework.beans.factory.BeanCreationException: Error creating bean with name 'casedao' defined in class path resource [conf/casemanagement.xml]: Cannot resolve reference to bean 'casemetadata' while setting bean property 'caseMetadata'; nested exception is org.springframework.beans.factory.BeanCreationException: Error creating bean with name 'casemetadata' defined in class path resource [conf/casemanagement.xml]: Error setting property values; nested exception is org.springframework.beans.PropertyBatchUpdateException; nested PropertyAccessExceptions (1) are:
    PropertyAccessException 1: org.springframework.beans.MethodInvocationException: Property 'flags' threw exception; nested exception is java.lang.NullPointerException
    at org.springframework.beans.factory.support.BeanDefinitionValueResolver.resolveReference(BeanDefinitionValueResolver.java:275)
    at org.springframework.beans.factory.support.BeanDefinitionValueResolver.resolveValueIfNecessary(BeanDefinitionValueResolver.java:104)
    at org.springframework.beans.factory.support.AbstractAutowireCapableBeanFactory.applyPropertyValues(AbstractAutowireCapableBeanFactory.java:1245)
    at org.springframework.beans.factory.support.AbstractAutowireCapableBeanFactory.populateBean(AbstractAutowireCapableBeanFactory.java:1010)
    at org.springframework.beans.factory.support.AbstractAutowireCapableBeanFactory.doCreateBean(AbstractAutowireCapableBeanFactory.java:472)
    at org.springframework.beans.factory.support.AbstractAutowireCapableBeanFactory$1.run(AbstractAutowireCapableBeanFactory.java:409)
    at java.security.AccessController.doPrivileged(Native Method)
    at org.springframework.beans.factory.support.AbstractAutowireCapableBeanFactory.createBean(AbstractAutowireCapableBeanFactory.java:380)
    at org.springframework.beans.factory.support.AbstractBeanFactory$1.getObject(AbstractBeanFactory.java:264)
    at org.springframework.beans.factory.support.DefaultSingletonBeanRegistry.getSingleton(DefaultSingletonBeanRegistry.java:222)
    at org.springframework.beans.factory.support.AbstractBeanFactory.doGetBean(AbstractBeanFactory.java:261)
    at org.springframework.beans.factory.support.AbstractBeanFactory.getBean(AbstractBeanFactory.java:185)
    at org.springframework.beans.factory.support.AbstractBeanFactory.getBean(AbstractBeanFactory.java:164)
    at org.springframework.beans.factory.support.DefaultListableBeanFactory.preInstantiateSingletons(DefaultListableBeanFactory.java:429)
    at org.springframework.context.support.AbstractApplicationContext.finishBeanFactoryInitialization(AbstractApplicationContext.java:728)
    at org.springframework.context.support.AbstractApplicationContext.refresh(AbstractApplicationContext.java:380)
    at com.datanomic.director.startup.WebApplicationContext.refresh(WebApplicationContext.java:109)
    at org.springframework.web.context.ContextLoader.createWebApplicationContext(ContextLoader.java:255)
    at org.springframework.web.context.ContextLoader.initWebApplicationContext(ContextLoader.java:199)
    Caused by: org.springframework.beans.factory.BeanCreationException: Error creating bean with name 'casedao' defined in class path resource [conf/casemanagement.xml]: Cannot resolve reference to bean 'casemetadata' while setting bean property 'caseMetadata'; nested exception is org.springframework.beans.factory.BeanCreationException: Error creating bean with name 'casemetadata' defined in class path resource [conf/casemanagement.xml]: Error setting property values; nested exception is org.springframework.beans.PropertyBatchUpdateException; nested PropertyAccessExceptions (1) are:
    PropertyAccessException 1: org.springframework.beans.MethodInvocationException: Property 'flags' threw exception; nested exception is java.lang.NullPointerException
    at org.springframework.beans.factory.support.BeanDefinitionValueResolver.resolveReference(BeanDefinitionValueResolver.java:275)
    at org.springframework.beans.factory.support.BeanDefinitionValueResolver.resolveValueIfNecessary(BeanDefinitionValueResolver.java:104)
    at org.springframework.beans.factory.support.AbstractAutowireCapableBeanFactory.applyPropertyValues(AbstractAutowireCapableBeanFactory.java:1245)
    at org.springframework.beans.factory.support.AbstractAutowireCapableBeanFactory.populateBean(AbstractAutowireCapableBeanFactory.java:1010)
    at org.springframework.beans.factory.support.AbstractAutowireCapableBeanFactory.doCreateBean(AbstractAutowireCapableBeanFactory.java:472)
    at org.springframework.beans.factory.support.AbstractAutowireCapableBeanFactory$1.run(AbstractAutowireCapableBeanFactory.java:409)
    at java.security.AccessController.doPrivileged(Native Method)
    at org.springframework.beans.factory.support.AbstractAutowireCapableBeanFactory.createBean(AbstractAutowireCapableBeanFactory.java:380)
    at org.springframework.beans.factory.support.AbstractBeanFactory$1.getObject(AbstractBeanFactory.java:264)
    at org.springframework.beans.factory.support.DefaultSingletonBeanRegistry.getSingleton(DefaultSingletonBeanRegistry.java:222)
    at org.springframework.beans.factory.support.AbstractBeanFactory.doGetBean(AbstractBeanFactory.java:261)
    at org.springframework.beans.factory.support.AbstractBeanFactory.getBean(AbstractBeanFactory.java:185)
    at org.springframework.beans.factory.support.AbstractBeanFactory.getBean(AbstractBeanFactory.java:164)
    at org.springframework.beans.factory.support.BeanDefinitionValueResolver.resolveReference(BeanDefinitionValueResolver.java:269)
    at org.springframework.beans.factory.support.BeanDefinitionValueResolver.resolveValueIfNecessary(BeanDefinitionValueResolver.java:104)
    at org.springframework.beans.factory.support.AbstractAutowireCapableBeanFactory.applyPropertyValues(AbstractAutowireCapableBeanFactory.java:1245)
    at org.springframework.beans.factory.support.AbstractAutowireCapableBeanFactory.populateBean(AbstractAutowireCapableBeanFactory.java:1010)
    at org.springframework.beans.factory.support.AbstractAutowireCapableBeanFactory.doCreateBean(AbstractAutowireCapableBeanFactory.java:472)
    at org.springframework.beans.factory.support.AbstractAutowireCapableBeanFactory$1.run(AbstractAutowireCapableBeanFactory.java:409)
    at java.security.AccessController.doPrivileged(Native Method)
    at org.springframework.beans.factory.support.AbstractAutowireCapableBeanFactory.createBean(AbstractAutowireCapableBeanFactory.java:380)
    at org.springframework.beans.factory.support.AbstractBeanFactory$1.getObject(AbstractBeanFactory.java:264)
    at org.springframework.beans.factory.support.DefaultSingletonBeanRegistry.getSingleton(DefaultSingletonBeanRegistry.java:222)
    at org.springframework.beans.factory.support.AbstractBeanFactory.doGetBean(AbstractBeanFactory.java:261)
    at org.springframework.beans.factory.support.AbstractBeanFactory.getBean(AbstractBeanFactory.java:185)
    at org.springframework.beans.factory.support.AbstractBeanFactory.getBean(AbstractBeanFactory.java:164)
    at org.springframework.beans.factory.support.DefaultListableBeanFactory.preInstantiateSingletons(DefaultListableBeanFactory.java:429)
    at org.springframework.context.support.AbstractApplicationContext.finishBeanFactoryInitialization(AbstractApplicationContext.java:728)
    at org.springframework.context.support.AbstractApplicationContext.refresh(AbstractApplicationContext.java:380)
    at com.datanomic.director.startup.WebApplicationContext.refresh(WebApplicationContext.java:109)
    at org.springframework.web.context.ContextLoader.createWebApplicationContext(ContextLoader.java:255)
    at org.springframework.web.context.ContextLoader.initWebApplicationContext(ContextLoader.java:199)
    at org.springframework.web.context.ContextLoaderListener.contextInitialized(ContextLoaderListener.java:45)
    at org.apache.catalina.core.StandardContext.listenerStart(StandardContext.java:4791)
    at org.apache.catalina.core.StandardContext.startInternal(StandardContext.java:5285)
    at org.apache.catalina.util.LifecycleBase.start(LifecycleBase.java:150)
    at org.apache.catalina.core.ContainerBase.addChildInternal(ContainerBase.java:901)
    at org.apache.catalina.core.ContainerBase.addChild(ContainerBase.java:877)
    at org.apache.catalina.core.StandardHost.addChild(StandardHost.java:618)
    at org.apache.catalina.startup.HostConfig.deployWAR(HostConfig.java:963)
    at org.apache.catalina.startup.HostConfig$DeployWar.run(HostConfig.java:1600)
    at java.util.concurrent.Executors$RunnableAdapter.call(Executors.java:471)
    at java.util.concurrent.FutureTask$Sync.innerRun(FutureTask.java:334)
    at java.util.concurrent.FutureTask.run(FutureTask.java:166)
    at java.util.concurrent.ThreadPoolExecutor.runWorker(ThreadPoolExecutor.java:1110)
    at java.util.concurrent.ThreadPoolExecutor$Worker.run(ThreadPoolExecutor.java:603)
    at java.lang.Thread.run(Thread.java:722)
    Caused by: org.springframework.beans.factory.BeanCreationException: Error creating bean with name 'casemetadata' defined in class path resource [conf/casemanagement.xml]: Error setting property values; nested exception is org.springframework.beans.PropertyBatchUpdateException; nested PropertyAccessExceptions (1) are:
    PropertyAccessException 1: org.springframework.beans.MethodInvocationException: Property 'flags' threw exception; nested exception is java.lang.NullPointerException
    at org.springframework.beans.factory.support.AbstractAutowireCapableBeanFactory.applyPropertyValues(AbstractAutowireCapableBeanFactory.java:1279)
    at org.springframework.beans.factory.support.AbstractAutowireCapableBeanFactory.populateBean(AbstractAutowireCapableBeanFactory.java:1010)
    at org.springframework.beans.factory.support.AbstractAutowireCapableBeanFactory.doCreateBean(AbstractAutowireCapableBeanFactory.java:472)
    at org.springframework.beans.factory.support.AbstractAutowireCapableBeanFactory$1.run(AbstractAutowireCapableBeanFactory.java:409)
    at java.security.AccessController.doPrivileged(Native Method)
    at org.springframework.beans.factory.support.AbstractAutowireCapableBeanFactory.createBean(AbstractAutowireCapableBeanFactory.java:380)
    at org.springframework.beans.factory.support.AbstractBeanFactory$1.getObject(AbstractBeanFactory.java:264)
    at org.springframework.beans.factory.support.DefaultSingletonBeanRegistry.getSingleton(DefaultSingletonBeanRegistry.java:222)
    at org.springframework.beans.factory.support.AbstractBeanFactory.doGetBean(AbstractBeanFactory.java:261)
    at org.springframework.beans.factory.support.AbstractBeanFactory.getBean(AbstractBeanFactory.java:185)
    at org.springframework.beans.factory.support.AbstractBeanFactory.getBean(AbstractBeanFactory.java:164)
    at org.springframework.beans.factory.support.BeanDefinitionValueResolver.resolveReference(BeanDefinitionValueResolver.java:269)
    ... 46 more
    Caused by: org.springframework.beans.PropertyBatchUpdateException; nested PropertyAccessExceptions (1) are:
    PropertyAccessException 1: org.springframework.beans.MethodInvocationException: Property 'flags' threw exception; nested exception is java.lang.NullPointerException
    at org.springframework.beans.AbstractPropertyAccessor.setPropertyValues(AbstractPropertyAccessor.java:104)
    at org.springframework.beans.AbstractPropertyAccessor.setPropertyValues(AbstractPropertyAccessor.java:59)
    at org.springframework.beans.factory.support.AbstractAutowireCapableBeanFactory.applyPropertyValues(AbstractAutowireCapableBeanFactory.java:1276)
    ... 57 more
    May 13, 2013 12:50:24 AM org.apache.catalina.core.StandardContext startInternal
    SEVERE: Error listenerStart
    May 13, 2013 12:50:24 AM org.apache.catalina.core.StandardContext startInternal
    SEVERE: Context [dndirector] startup failed due to previous errors
    May 13, 2013 12:50:25 AM org.apache.catalina.loader.WebappClassLoader clearReferencesJdbc
    SEVERE: The web application [dndirector] registered the JDBC driver [oracle.jdbc.OracleDriver] but failed to unregister it when the web application was stopped. To prevent a memory leak, the JDBC Driver has been forcibly unregistered.
    May 13, 2013 12:50:25 AM org.apache.catalina.loader.WebappClassLoader clearReferencesJdbc
    SEVERE: The web application [dndirector] registered the JDBC driver [org.postgresql.Driver] but failed to unregister it when the web application was stopped. To prevent a memory leak, the JDBC Driver has been forcibly unregistered.
    May 13, 2013 12:50:25 AM org.apache.catalina.loader.WebappClassLoader checkThreadLocalMapForLeaks
    SEVERE: The web application [dndirector] created a ThreadLocal with key of type [java.lang.ThreadLocal] (value [java.lang.ThreadLocal@623e20db]) and a value of type [java.lang.Class] (value [class oracle.sql.TypeDescriptorFactory]) but failed to remove it when the web application was stopped. Threads are going to be renewed over time to try and avoid a probable memory leak.
    May 13, 2013 12:50:25 AM org.apache.catalina.loader.WebappClassLoader checkThreadLocalMapForLeaks
    SEVERE: The web application [dndirector] created a ThreadLocal with key of type [java.lang.ThreadLocal] (value [java.lang.ThreadLocal@da1c402]) and a value of type [java.lang.Class] (value [class oracle.sql.AnyDataFactory]) but failed to remove it when the web application was stopped. Threads are going to be renewed over time to try and avoid a probable memory leak.
    May 13, 2013 12:50:25 AM org.apache.catalina.startup.HostConfig deployDirectory
    INFO: Deploying web application directory /u100/app/PCEXDB/orpcexmt/oracle/OEDQ2/apache-tomcat-7.0.29/webapps/docs
    May 13, 2013 12:50:25 AM org.apache.catalina.startup.HostConfig deployDirectory
    INFO: Deploying web application directory /u100/app/PCEXDB/orpcexmt/oracle/OEDQ2/apache-tomcat-7.0.29/webapps/examples
    May 13, 2013 12:50:25 AM org.apache.catalina.startup.HostConfig deployDirectory
    INFO: Deploying web application directory /u100/app/PCEXDB/orpcexmt/oracle/OEDQ2/apache-tomcat-7.0.29/webapps/manager
    May 13, 2013 12:50:25 AM org.apache.catalina.startup.HostConfig deployDirectory
    INFO: Deploying web application directory /u100/app/PCEXDB/orpcexmt/oracle/OEDQ2/apache-tomcat-7.0.29/webapps/ROOT
    May 13, 2013 12:50:25 AM org.apache.catalina.startup.HostConfig deployDirectory
    INFO: Deploying web application directory /u100/app/PCEXDB/orpcexmt/oracle/OEDQ2/apache-tomcat-7.0.29/webapps/host-manager
    May 13, 2013 12:50:25 AM org.apache.coyote.AbstractProtocol start
    INFO: Starting ProtocolHandler ["http-bio-8081"]
    May 13, 2013 12:50:25 AM org.apache.coyote.AbstractProtocol start
    INFO: Starting ProtocolHandler ["ajp-bio-8010"]
    May 13, 2013 12:50:25 AM org.apache.catalina.startup.Catalina start
    INFO: Server startup in 16882 ms
    Can someone please tell me what is going wrong here?

    Hi,
    Multiple instances of EDQ on a single server is technically possible provided the installer takes care to avoid port conflicts. It is not the case that there is a single port used by an EDQ server, for example.
    For various reasons, it is not officially supported; attempting to diagnose issues on custom installations on Tomcat is especially difficult and we do not provide documentation on this. In general, the requirement usually comes up for Dev/Test instances (as there is no performance advantage of using multiple instances on a single server), where we would recommend the use of virtualization where this is a requirement.
    Regards,
    Mike

  • How to open two sockets in one single server

    May I open two sockets with different listening port numbers in a single server? For each socket, the way to deal with the inputstream and outputstream is different. May the thread be like this:
    public class twoSocketServer implements Runnable {
    public twoSocketServer() {
    try{
    SSLServerSocketFactory fact = SSLServerSocketFactory.getInstance(rand, selfPrivateKey, selfCertificate, trustEngine, null);
    serverSocket1 = (SSLServerSocket) fact.createServerSocket(ListeningPort1);
    serverSocket1.setNeedClientAuth(false);
    serverSocket2 = (SSLServerSocket) fact.createServerSocket(ListeningPort2);
    serverSocket2.setNeedClientAuth(false);
    } catch {...}
    public void run()
    while(true)
    try
    SSLSocket socket1 = (SSLSocket) serverSocket1.accept();
    new handler1(socket1).start();
    SSLSocket socket2 = (SSLSocket) serverSocket2.accept();
    new handler2(socket2).start();
    } catch {...}
    class handler1 extends Thread {...}
    class handler2 extends Thread {...}
    Is there something wrong with this idea? If yes, how can I correct it? Thanks.

    try
    SSLSocket socket1 = (SSLSocket)
    serverSocket1.accept();
    new handler1(socket1).start();
    SSLSocket socket2 = (SSLSocket)
    serverSocket2.accept();
    new handler2(socket2).start();
    Is there something wrong with this idea? If yes, how
    can I correct it? Thanks.You can do it.
    In the above code block you are going to need two threads. One for each SocketServer. The accept() method blocks until it recieves a connection. So in your above code it would first wait only for a connection on port 1. Then it would wait only for a connection on port 2. And then start over. That probably isn't what you want.

  • Intermittend DNS resolution, timeserver, group policy updates errors in client logs in Win 2012 R2 single server environement

    We recently switched hardware and server software Win SBS 2008 to 2012R2 for a small network roughly 40 clients (Win7 Pro / Win 8.1 Pro) about 16 running concurrently at a given time and one network printer with the printer queue residing on the DC as well.
    I read that a single server environment might not be ideal in particular no fail-over but that is an accepted risk in this particular network here.
    Errors:
    Error 1043: Timeout during name resolution request
    Error 1129: Group policy updates could not be processed due to DC not available
    Error 5719: Could not establish secure connection to DC, DC not available
    Occasionally but disappears after a while
    Error 134: As a result of a DNS resolution timeout could not reach time server
    Symptoms
    On Win 7 Clients
    Network shares added through Group Policy will not show sometimes
    Network shares disconnect (red X) and when accessed return access authorization error after one or two clicks on the share finally grant access again
    When the issue with accessing network shares occurs, it usually also affects Internet access meaning a 'server not responding' error appears in the browser windows when trying to open just any web page
    nslookup during the incident returns cannot resolve error
    ipconfig on client shows correct default router (VDSL Router) and DHCP / DNS Domain Controller
    Also, the Win system log shows the above errors during these incidents, however, the nuimber of incidents vary from 20-30
    On Win 8.1 Clients
    Same as above with the slight variation for network shares apparently due to Server 2012 and Win 8.1 clients managing drive shares differently. However, network share refresh does not work with this clients. In most cases only a gpupdate /force returns
    drive shares but usually only for the active session. After logoff / logon the shares are gone again.
    The issue does appear to be load related since it occurs even if there are only one or two workstations active.
    Server Configuration
    Dell R320 PowerEdge 16GB / 4TB 7200RPM RAID10 / GBitEthernet
    Zyxel 1910-48 Port Switch
    VDSL 50Mbps Down / 20Mbps Up
    Since the DC is the only local DNS and there are no plans to add another one or move DNS to another server, the DNS server is configured with this own address as preferred DNS with three DNS forwarders 1) VDSL Router 2) ISP DNS1 3) ISP DNS2
    Currently only one Network card is active for problem determination reasons.
    There appears to be no consensus concerning IPV6 enabled or disabled, I tried both with no apparent effect
    I have set all network cards server and client to Full Duplex and the same speed, also disabled Offload functions within the adapter settings. Some but no consistent improvements.
    Best Practice Analyzer Results
    DNS server scavening not enabled
    Root hint server XYZ must respond to NS queries for the root zone
    More than one forwarding server should be configured (although 3 are configured)
    NIC1 should be configured to use both a preferred and alternate DNS (there is only one DNS in this network)
    I have found some instructions to apply changes to the clients through a host file but I would rather like to understand whether this DNS response time issue can be resolved on the server for example timing setting perhaps. Currently the DNS forwarders are
    set to 3 second.
    Since a few people have reported issues with DNS but most are working with multi DNS, DC environment I could not really apply any suggestions made there. perhaps there is anyone like me who is running a single server who has overcome or experience the same
    issues. Any help would be appreciated

    Hello Milos thx for your reply.. my comments below
    1. What does it "switched"? You may mean migration or new installation. We do not know...
    >> Switched is probably the incorrect term, replaced would be the appropriate wording. Before, there was a HP Proliant Server with SBS 2008 with distinct domain and now there is a Dell Server with MS 2012 R2 with a distinct domain. Client were
    removed from one (SBS) domain and added to the new Server 2012 domain. Other components did not change for example same Network Switch or VDSL Router, Workstations and Printer
    2. Two DCs are better alternative. Or backup very frequently. There are two groups of administrators. Those who have lost DC and those who will experience this disaster in near future.
    >> Correct, and I am aware of that
    3. NIC settings in W 7 and W 8.1, namely DNS points to DC (...and NOTHING else. No public IP or that of router DNS.))
    >> Correct, this is how it's currently implemented. Clients point to DC for DHCP and DNS and Default Router, no public IP or DNS. The only references to ISP DNS exist on the VDSL Router itself as provided through ISP when establishing VDSL
    Link and the list of Forwarders in the DNS Server configuration. However, I have just recently added the ISPs DNS as forwarders for test purposes and will probably learn tomorrow morning whether this had any effect for better or worse.
    4. Do nslookup to RR on clients. RR branch is saying client basic info on LDAP parameters of AD.
    >> Will post as soon as available
    5. I do not use forwarders and the system works
    >> Ok, does this mean it works for you in a similar or the same infrastructure setup or are you saying it is not required at all and I can remove any forwarder in a scenario like mine? If not required can you explain a bit more why it is not
    required apart from that it does work for you that way?
    6. DHCP should sit on DC (DHCP on router is disabled)
    >> Correct, no other device is configured to provide DHCP service other than DC and DHCP is currently running on DC
    7. NIC settings in DC points to itself (loopback address 127.0.0.1)
    >> Are you sure this is still correct and does apply to Server 2012? I am reading articles stating that it should be the servers own IP but local loop or should this be added as alternate DNS in addition to the servers own IP?
    8. Use IPCONFIG /FLUSHDNS whenever you change DNS settings.
    >> OK, that was not done every time I changed some settings but I can do that next week. Reboot alone would not suffice, correct?
    9. Test your system with dcdiag.
    >> See result below
    10. Share your findings.
    Regards
    Milos
    Directory Server Diagnosis
    Performing initial setup:
       Trying to find home server...
      Home Server = GSERVER2
       * Identified AD Forest.
       Done gathering initial info.
    Doing initial required tests
    Testing server: Default-First-Site-Name\GSERVER2
          Starting test: Connectivity
             ......................... GSERVER2 passed test Connectivity
    Doing primary tests
       Testing server: Default-First-Site-Name\GSERVER2
          Starting test: Advertising
             ......................... GSERVER2 passed test Advertising
          Starting test: FrsEvent
             ......................... GSERVER2 passed test FrsEvent
          Starting test: DFSREvent
             ......................... GSERVER2 passed test DFSREvent
          Starting test: SysVolCheck
             ......................... GSERVER2 passed test SysVolCheck
          Starting test: KccEvent
             ......................... GSERVER2 passed test KccEvent
          Starting test: KnowsOfRoleHolders
             ......................... GSERVER2 passed test
             KnowsOfRoleHolders
          Starting test: MachineAccount
             ......................... GSERVER2 passed test MachineAccount
          Starting test: NCSecDesc
             ......................... GSERVER2 passed test NCSecDesc
          Starting test: NetLogons
             ......................... GSERVER2 passed test NetLogons
          Starting test: ObjectsReplicated
             ......................... GSERVER2 passed test
             ObjectsReplicated
          Starting test: Replications
             ......................... GSERVER2 passed test Replications
          Starting test: RidManager
             ......................... GSERVER2 passed test RidManager
          Starting test: Services
             ......................... GSERVER2 passed test Services
          Starting test: SystemLog
             ......................... GSERVER2 passed test SystemLog
          Starting test: VerifyReferences
             ......................... GSERVER2 passed test VerifyReferences  
       Running partition tests on : ForestDnsZones
          Starting test: CheckSDRefDom
             ......................... ForestDnsZones passed test CheckSDRefDom
          Starting test: CrossRefValidation
             ......................... ForestDnsZones passed test
             CrossRefValidation
       Running partition tests on : DomainDnsZones
          Starting test: CheckSDRefDom
             ......................... DomainDnsZones passed test CheckSDRefDom
          Starting test: CrossRefValidation
             ......................... DomainDnsZones passed test
             CrossRefValidation
       Running partition tests on : Schema
          Starting test: CheckSDRefDom
             ......................... Schema passed test CheckSDRefDom
          Starting test: CrossRefValidation
             ......................... Schema passed test CrossRefValidation
       Running partition tests on : Configuration
          Starting test: CheckSDRefDom
             ......................... Configuration passed test CheckSDRefDom
          Starting test: CrossRefValidation
             ......................... Configuration passed test CrossRefValidation
       Running partition tests on : GS2
          Starting test: CheckSDRefDom
             ......................... GS2 passed test CheckSDRefDom
          Starting test: CrossRefValidation
             ......................... GS2 passed test CrossRefValidation  
       Running enterprise tests on : GS2.intra
          Starting test: LocatorCheck
             ......................... GS2.intra passed test LocatorCheck
          Starting test: Intersite
             ......................... GS2.intra passed test Intersite
    Server:  gserver2.g2.intra
    Address:  192.168.240.6
    *** gserver2.g2.intra can't find g2: Non-existent domain
    > gserver2
    Server:  gserver2.g2.intra
    Address:  192.168.240.6
    g2.intra
            primary name server = gserver2.g2.intra
            responsible mail addr = hostmaster.g2.intra
            serial  = 443
            refresh = 900 (15 mins)
            retry   = 600 (10 mins)
            expire  = 86400 (1 day)
            default TTL = 3600 (1 hour)
    > wikipedia.org
    Server:  gserver2.g2.intra
    Address:  192.168.240.6
    Non-authoritative answer:
    wikipedia.org   MX preference = 10, mail exchanger = polonium.wikimedia.org
    wikipedia.org   MX preference = 50, mail exchanger = lead.wikimedia.org
    polonium.wikimedia.org  internet address = 208.80.154.90
    polonium.wikimedia.org  AAAA IPv6 address = 2620:0:861:3:208:80:154:90
    lead.wikimedia.org      internet address = 208.80.154.89
    lead.wikimedia.org      AAAA IPv6 address = 2620:0:861:3:208:80:154:89
    Final benchmark results, sorted by nameserver performance:
     (average cached name retrieval speed, fastest to slowest)
      192.168.240.  6 |  Min  |  Avg  |  Max  |Std.Dev|Reliab%|
      ----------------+-------+-------+-------+-------+-------+
      + Cached Name   | 0,001 | 0,002 | 0,003 | 0,001 | 100,0 |
      + Uncached Name | 0,027 | 0,076 | 0,298 | 0,069 | 100,0 |
      + DotCom Lookup | 0,041 | 0,048 | 0,079 | 0,009 | 100,0 |
      ---<-------->---+-------+-------+-------+-------+-------+
                 gserver2.g2.intra
                    Local Network Nameserver
      195.186.  4.162 |  Min  |  Avg  |  Max  |Std.Dev|Reliab%|
      ----------------+-------+-------+-------+-------+-------+
      - Cached Name   | 0,022 | 0,023 | 0,025 | 0,000 | 100,0 |
      - Uncached Name | 0,025 | 0,071 | 0,274 | 0,065 | 100,0 |
      - DotCom Lookup | 0,039 | 0,040 | 0,043 | 0,001 | 100,0 |
      ---<-------->---+-------+-------+-------+-------+-------+
                         cns8.bluewin.ch
               BLUEWIN-AS Swisscom (Schweiz) AG,CH
      195.186.  1.162 |  Min  |  Avg  |  Max  |Std.Dev|Reliab%|
      ----------------+-------+-------+-------+-------+-------+
      - Cached Name   | 0,022 | 0,023 | 0,026 | 0,001 | 100,0 |
      - Uncached Name | 0,025 | 0,072 | 0,299 | 0,066 | 100,0 |
      - DotCom Lookup | 0,039 | 0,042 | 0,049 | 0,003 | 100,0 |
      ---<-------->---+-------+-------+-------+-------+-------+
                         cns7.bluewin.ch
               BLUEWIN-AS Swisscom (Schweiz) AG,CH
        8.  8.  8.  8 |  Min  |  Avg  |  Max  |Std.Dev|Reliab%|
      ----------------+-------+-------+-------+-------+-------+
      - Cached Name   | 0,033 | 0,040 | 0,079 | 0,011 | 100,0 |
      - Uncached Name | 0,042 | 0,113 | 0,482 | 0,097 | 100,0 |
      - DotCom Lookup | 0,049 | 0,079 | 0,192 | 0,039 | 100,0 |
      ---<-------->---+-------+-------+-------+-------+-------+
                 google-public-dns-a.google.com
                     GOOGLE - Google Inc.,US
      UTC: 2014-11-03, from 14:33:12 to 14:33:29, for 00:17,648
    15: 40
    192.168.240.  6 |  Min  |  Avg  |  Max  |Std.Dev|Reliab%|
      ----------------+-------+-------+-------+-------+-------+
      + Cached Name   | 0,001 | 0,002 | 0,004 | 0,000 | 100,0 |
      + Uncached Name | 0,025 | 0,074 | 0,266 | 0,063 | 100,0 |
      + DotCom Lookup | 0,042 | 0,048 | 0,075 | 0,007 | 100,0 |
      ---<-------->---+-------+-------+-------+-------+-------+
                 gserver2.g2.intra
                    Local Network Nameserver
      195.186.  1.162 |  Min  |  Avg  |  Max  |Std.Dev|Reliab%|
      ----------------+-------+-------+-------+-------+-------+
      - Cached Name   | 0,022 | 0,024 | 0,029 | 0,001 | 100,0 |
      - Uncached Name | 0,024 | 0,073 | 0,289 | 0,067 | 100,0 |
      - DotCom Lookup | 0,039 | 0,041 | 0,043 | 0,001 | 100,0 |
      ---<-------->---+-------+-------+-------+-------+-------+
                         cns7.bluewin.ch
               BLUEWIN-AS Swisscom (Schweiz) AG,CH
      195.186.  4.162 |  Min  |  Avg  |  Max  |Std.Dev|Reliab%|
      ----------------+-------+-------+-------+-------+-------+
      - Cached Name   | 0,022 | 0,024 | 0,029 | 0,001 | 100,0 |
      - Uncached Name | 0,025 | 0,073 | 0,286 | 0,065 | 100,0 |
      - DotCom Lookup | 0,041 | 0,066 | 0,180 | 0,037 | 100,0 |
      ---<-------->---+-------+-------+-------+-------+-------+
                         cns8.bluewin.ch
               BLUEWIN-AS Swisscom (Schweiz) AG,CH
        8.  8.  8.  8 |  Min  |  Avg  |  Max  |Std.Dev|Reliab%|
      ----------------+-------+-------+-------+-------+-------+
      - Cached Name   | 0,033 | 0,038 | 0,077 | 0,009 | 100,0 |
      - Uncached Name | 0,042 | 0,105 | 0,398 | 0,091 | 100,0 |
      - DotCom Lookup | 0,049 | 0,066 | 0,141 | 0,025 | 100,0 |
      ---<-------->---+-------+-------+-------+-------+-------+
                 google-public-dns-a.google.com
                     GOOGLE - Google Inc.,US
      UTC: 2014-11-03, from 14:39:59 to 14:40:12, for 00:13,363

  • Migrate from Server 2003 (no Exchange, single server) to SBS 2011

    Are there any Technets or other Microsoft documentation on migrating from Server 2003 (no Exchange, single server) to SBS 2011?  I understand it is possible, but I would like confirmation and some documentation before purchasing the appropriate hardware
    and licenses.
    Thanks,
    Doug
    Doug Orr

    Hi Doug,
    In general, the migration is the similar with migrating process from SBS 2003. In addition, also have main
    difference.
    “The main difference is that you don’t have to remove the source and that you have to follow the migration
    instructions as the SBS migration wizard will not launch.”
    You can get above description from following similar thread. Please refer to.
    Migrate from Windows Server Standard 2003 (not SBS) to SBS 2011
    http://social.technet.microsoft.com/Forums/en-US/68790e41-b833-4e81-8200-63852ab9e196/migrate-from-windows-server-standard-2003-not-sbs-to-sbs-2011?forum=smallbusinessserver
    Meanwhile, please refer to the following article. It may be helpful.
    Step By Step Guide To Migrating To SBS 2011
    http://www.techieshelp.com/step-by-step-guide-to-migrating-to-sbs-2011/
    Please Note: Since the web site is not hosted by Microsoft, the link may change without notice. Microsoft
    does not guarantee the accuracy of this information.
    However, as Robert suggests, would you please confirm specific version of SBS? It may help us to understand
    clearly and provide correct information.
    Hope this helps.
    Best regards,
    Justin Gu

  • Steps to Install oracle 11g client 32 Bit,64 Bit in a single server

    Hi,
    I have a requirement to Install Both "Oracle Client 11.2.0.2 Win32" and "Oracle Client 11.2.0.2 Win64" on a single server.
    Please provide the step by step instruction for the above requirement.
    Environment
    Windows Server 2008 R2 64Bit.
    Thanks
    Sambit

    Just use separate base directories e.g.
    c:\32bit\oracle and
    c:\64bit\oracle
    Install the 32-bit client first, then the 64-bit client. The order should not matter.
    WINDOWS: Install Oracle Client 11.2 32-bit and 64-bit on Same System Overwrites Programs Menu Entry [ID 1243374.1]
    How To Install Both 32-bit and 64-bit ODP, OLEDB, And ODBC Oracle Software on 64-bit Windows [ID 795602.1]
    HTH
    Srini

  • Single server solution for RDS / TS / RDP using Windows Server 2012 R2

    Planning on setting up a small single server and  need this functionality:
    * 3 local users runnnig Windows 7 Home Premium needs to access files on the server
    * The same 3 users should also be able to connect from home (PC, Mac, iPhone) and run an application on the server. (Session-Based Remote Desktop).
    We want to use Windows Server 2012, and found out that Essentials does not support RDP, so that leaves Foundation and Standard versions.
    However, I also found out that in WS 2012 the RDP can not be on the same server as the Domain Controller, and we therefor needs to run 2 server instances on our hardware. I think this starts to look way to complicated for what we want to do, but found out
    that WS 2012 R2 allows a single server to run RDP (See TechNet article 2833839).
    So we will go for Windows Server 2012 R2, either Foundation or Standard to set up our RDP.
    So now the question: Will that solution work with our local machines running Windows 7 Home Premium, as they cannot connect to a domain? Can we set up some kind of simple file share or Workgroup to acces files locally while still keeping the RDP
    functionality on the server?
    And, will WS 2012 Foundation R2 do this as well as WS 2012 Standard R2?
    (I have been asking several locat MS representatives to find a solution to our needs, but no one seems to know how this works....of cause we could just get 2 WS 2012 Standard server instances, run one as DC and on as RDCB and upgrade all our clients to Win
    7 Pro, but we would like a solution with minimal investment in time and money)
    Rgds
    Petter

    Hi Ryan, 
    and thanks for the answer! I do not know how to do "multiple quote" in this forum so I do it this way:
    "have you considered virtualisation, as you can run multiple virtual machines under one licence. I think this would be the cheapest and most efficient use of your money. Upgrading your clients to Windows 7 pro would allow you to have domain control
    Single Sign On SSO. "
    This is the "official" solution I think: Upgrade all clients to Win 7 Pro and run two instances of Win Server 2012 Standard on the server.
    However, I was hoping to get away with something a bit more Quick & Dirty.....;-) We do not have big security issues and will have a good backup system, and I think for 3 users only, it will be more work trying to centralise administration like updating,
    backups etc, than to just go to each machine and do what is needed. 
    We are good with computers/Windows but have no Server experience. A server guy will help us get started, but I dont want him around after that, so it must be a very simple solution.
    Also, installing 2 instances of WS 2012 and upgrading all 3 clients to Win Pro, and then installing all software and settings on the clients into the new domain user accounts on these clients is quite a lot of work. So I was hoping to keep only existing local
    users on the client machines and only have some kind of file share thing going on with the server disks that we need to access. So perhaps use a Workgroup instead of a domain, if that works with the RDS setup?
    "Option 1
    2 virtual machines 1x DC and 1x RDS server."
    So, if we set up RDS this way (so we can log in remote and run our application session-based on the server), can we keep the local clients running Windows Home Premium using our current local user logins (ie no domain user accounts created on the client machines,
    as this is impossible in Home versions) and still access the server disks somehow, or is it impossible? 
    Another question is if it is stupid/a really bad solution...but I still want to know if it is possible....;-)
    "Option 2 
    2 virtual machines 1x DC and 1x RDS server.
    You can configure your RDS solution as a domain joined platform and will still be able to access resources from the local device as you can map local drives to the session host. http://www.serverintellect.com/support/techfaq/drive-rdp/
    Your users would have two sets of credentials, one for the local client and one for the domain."
    I do not want to access files over VPN or RDP, we only want to run an application on the server from remote (Session-Based Remote Desktop). However when we use the local clients we want to access files on the server, and then we access huge image and film files
    on fast RAID drives, so local network speed must be top speed. Also if possible we would like to not upgrade to Win Pro, and then joining a domain is not possible.
    "Option 3
    1x Server
    The second option would be to manually deploy the session host role and licencing role to a work group server. This would limit access to RDP only and you would loose web access functionality."
    I think this is what I was hoping for. It seems that the new R2 release of WS 2012 allows you to rund RDP and Domain Controller roles on the SAME instance of the server. That sounds nice, it limits what we need to keep track on and minimises the load on the
    server that needs to act as a very fast file server locally.
    However, can we do this and still keep file acces with only Windows Home (no domain) in the local clients (same question as above under "Option 1")?
    Rgds
    Petter

  • How to install multiple E-Business Suite in a single server?

    Hello,
    I read somewhere that we can install multiple E-Business Suite in a single server as long as the storage is enough, is it true? If yes do any of you can give me the steps to install it or refer me to a link? I'd searched here but couldn't find it, hope that I didn't miss something. What I want to do is install Vision database and another one is fresh install for testing, both in a single server. There will be about 20 people accessing that system. What kind of hardware must I use? Thanks.

    If you want to run 2 instances concurrently, It would be safe to assume you want 8 GB of RAM plus enough storage to host both instances, backups, archive logs, patches etc. For CPU, most entry level servers can be single, dual or quad socket, or CPU socket. Most CPUs are dual core, meaning there are 2 physical CPU cores in each socket. So if you get a 2 socket dual core server, you see 4 physical CPUs on the operating system. If you get a 4 socket dual core server, you see 8 physical CPUs. If you want to run R12 applications, you will definately need 4 GB of ram per instance (E-Business Suite installation). 11i might get by on 3 GB of ram per instance.

Maybe you are looking for