Muvo^2 freeze probl

i just got a muvo^2 and it was awesome but now it freezes up on the opening screen. do i just reboot it or what....right now im scaning it but i think it might be frozen again. please help....thank you

soup35,
Try doing a Clean up from Rescue mode. The sticky at the top of this (MP3 Players) forum covers the steps on how to get into Rescue Mode or you can check out the Knowledgebase article for the ste
ps.
http://us.creative.com/support/kb/article.asp?l=2&sid=4794
Jason

Similar Messages

  • Creative MuVO V100 freezes

    CMy 23 months old Creative MuVo v00 freezes often. I? reformatted? it a?few times. It works for a while then freezes again. Then it may recover by itself somehow. Then? it works for a few days then freezes again. This cycle then to repeat itself. Sometime you can't ?access it at all for reforamtting. ?Any permanent fix ? Thanks.

    mine is/was pretty dirty too. ?It recently got wet and stopped working. ?After letting it dry for a day, it still refused to work. ?In desperation I dunked it, without the battery half, into slightly soapy water and shook it vigorously, ?After spending another day drying, it worked! ?And the screen was even a little cleaner. ?Obviously, dunking your otherwise perfectly working MuVo into water to clean the screen is not something I would recommend. ?But it worked for mine.

  • Muvo N200 freezing & sounds prob

    I've had the Muvo N200 for three weeks now without a problem until the past three days. At first, when I'd turn it off, the screen would freeze and there would be an annoying sound that wouldn't stop. The problem would be temporarily solved when I removed and re-inserted battery or inserted a new one. The player turns on fine, but the same thing would happen again if I tried to turn it off again. But after a while, the thing would freeze and the sound would come back when I try to go to the menu or turn it off. When I turn it on, the player starts playing a random song at a random volume number.

    Did you install the new firmware?

  • Audigy 2 platinum EX . Computer freeze probl

    Every time I try to intall my new soundcard the pc freezes after booting up. I'm running xp pro with service pack 2, and the pc has a pentium 4 , 2.4 Ghz processor. This is the third card I've had with the same result. The PCI slots take graphics, and other cards with no hassle, but audigy freezes everything up.
    Help....please...please....

    I have a simular problem. On the first boot of the day my system will freeze, could be 2sec in, or 2 hours. Once i restart it runds like a dream. Now confirmed it is soundcard drivers by process of elimination. What drivers did you install to get it working without the freezing?

  • Zen Vision: M freezing probl

    My 30 gb Zen Vision: M has frozen twice now, where the screen completely freezes on one song and no matter what I press, nothing happens.
    When it first happened, I simply let it die out of batteries and charged it up full and it was good...but this time, I did that over 5 times and still its frozen
    I let it die out, then charge it to the fullest, turn it up, screen says "Rebuilding" then it goes to that same screen of the song where it froze...is there anything I can do here to fix the problem? I really don't want to lose my songs..

    The steps to enter recovery mode can be found on top of the board.
    Here's the link:
    http://forums.creative.com/creativel...p&message.id=3
    Message Edited by KokChoy-CL on 0-6-2008 0:23 PM

  • New muvo, but old probl

    Hello everyone!
    Time ago, my MuVo (classic) was suddently dead so I bought a muvo tx fm 256mb. Now, I can't use it because my windows can't install muvo drivers correctly. I've got 2 pc with windows XP and both of them give me the same problem!!!!!
    After some clicks on "my computer" It crash until I don't unplug the muvo. I can't write, read or do anything else with the muvo. Pratically it's unusable. It's nice because I had the same problems with my old Muvo!!!!!
    I tryed everything's possible. I also formatted my pc, but the problem's the same

    There was no need to download any drivers for Windows XP, it should ust be able to recognize the MUVO as a removable dri've, just like a memory stick. You can use "my computer" to install music files but you will probably have better luck with Windows Media Player or the Creative software.
    Try to rollback your computer to before you installed the drivers or uninstall the drivers.
    There is some useful information at: http://www.stainlesssteelrat.net/nomadprimer.htm

  • Muvo n200 recognize probl

    i have muvo n200 256mb. i try it on friends comp, it wasnt recognized first,but in other usb port worked fine...
    when i came home my computer didnt recognized it.. in every usb port.. it says
    `one of the USB devices attached on copmuter has malfunctioned and windows does not recognize it `
    i even try on 3 computers with win xp and got same message and when try to open recovery mode again same message.
    there is no problem with listening music
    firmware is .6.02,

    Try this:
    Disconnect the player and then open Device Manager.
    Select View Devices by Connection and Show Hidden Devices.
    Under your USB connection find all entries for your player including ones for Player Recovery Device and remove them all.
    Close Device Manager, restart PC?and then connect your player.
    Try this and let us know what happens.
    PB

  • My MuVo² have a probl

    Hi.My mp3 model is MuVo?. I bought it 3 years ago so it's a bit old. Today, I think it have some choks in my pocket and I cannot listen music, it dont want to read. It's right : "Recovery mode v.00", I have some options... So I have format all my mp3. But it's the same problem, it dont want to read. But if I connect it on my computer, I can put new music and read with my computer. It's like au USB key, but I cannot learn music. Do you know how to repair that ? Is it possible ?Please, use simple words, my english is very poor. Thanks.

    Hi,
    If the player is in recovery mode then connect to the PC and try to reload the players firmware. This is available from our download section.
    Hope this helps,
    John

  • Muvo N200 BIG PROBL

    Hello, I have this mp3 player almost 2 years, i had some problems wih him in the past, but none of them was so big as this. I was trying to reload newest firmware .20.04, everything seems to work properly, i did it step by step as they adviced on Creative pages, but after finishing reloading the firmware, i shut down?updating application and since then does the mp3 player no response. I can't turn it on, Pc don?t recognize him. So if anyone knows what to do (beyond throwing it into the basket), i?ll be very glad for any advice. Thanks a lot. Del

    Although SSR's post is for another model, [url="http://forums.creative.com/creativelabs/board/message?board.id=dap&message.id=80937#M80937">thes e steps may help[/url]:
    SSR wrote:
    Make sure to click on the "show details" link at the download page which explains how to apply it:
    Press and hold the Play button while connecting your player to your computer's USB port.
    <
    Continue to hold the Play button for 0 seconds after connecting your player to your computer.
    <
    Release the Play button when the Find New Hardware dialog box appears on the screen.
    <
    Follow the instructions on the screen to install recovery drivers for your player.
    <
    Download the MuVoTXFM_PCFW__7_04.exe file into your local hard disk.
    <
    Double-click the firmware upgrade file and follow the instructions on the screen.<
    Substitute the correct firmware version for your model and give it a try. It worked for my MuVo TX FM.
    Best of luck!

  • Muvo Tx 512 Probl

    First; I did research for two weeks on the right MP3 playerand selected the Creative Muvo TX 52 over ten other MP3 players. The main reason , the sizeof the player and the arm band which came highly recommended,along with the 52 capacity
    This was a Christmas present for my daughter to use while running and training in the gym.
    Imagin how I felt when it didn't come with an arm band but with some "international neck strap"!
    Secondly the thing can only load at the most , about 2 songs before starting error messages.
    loading WMA files and yes I've installed all the firm ware and updates,reformatted to fat & fat32 with out sucess.
    I tryed to return it to Buy.com but was purchased in early november and was out side of their return policy. Now my daughter want's nothing to do with it and I'm Stuck with a $00 albatross!!!!!!
    Any Suggestions?
    Mike V

    mikev,
    What error messages did you encounter? Types of software used? Types of audio files transfered?
    Jason

  • Muvo n200 1gb probl

    I have a new, less than two week old, Muvo 200n gb player that just started giving me problems today.
    I was running with it this morning and it just died halfway through my run. I assumed that the battery had run out so I put a new one in when I got home. That wasn't the problem as it powers up and then shuts down after about 3 seconds.
    So far I have tried reformatting it- which didn't work.
    I put one folder's worth of music back on and it still shuts down as soon as it powers up. The funny thing is that if I hook it up to my computer I can access those music files and play them back. If try to play the music through my player it just goes right to it's auto shut-down mode and doesn't even give me the chance to access any other parts of the player- like the radio.
    Any suggestions?
    Jon

    I am having the same problem with my player. It started the second day I had it. I seem to be able to get it working by reinstalling the firmware each time. When it stops working it will turn on temporarily and then shut down. I can access it as a removable dri've but it will not run under it's own power. After I reinstall the firmware it runs for a few hours and then the problem starts all over again. This is a serious problem for me as I intend to use this on a three week vacation traveling without a computer to reinstall the firmware each day. I had hoped there would be a solution on Creative's website but all I've seen mentioned about this problem is in these forums with no reply from Creative. Come on Creative..what's the deal?

  • MuVo V100 playing probl

    I have a muvo v00 and its about 0months old.
    Ive copied loads of songs onto it and its full but when i go to play anything i can only find about 5 songs at most.
    If i plug it into mine or someone elses pc all the songs are ther.
    Does anyone know how to fix this?
    If anyone could help id be really greatful.

    Come on, somebody has to have a clue!

  • Muvo X-Trainer probl

    Had my Muvo x-trainer just over a year now and has started developing a problem where whatever song you are listening to is distorted and you have to keep moving the headphone socket plug around to get a decent sound quality, although this is getting worse and worse and is just annoying to listen to now. I managed to find my reciept yesterday and typically I brought it January last year so just out of Warranty, Anyone have any ideas on what it could be or if there is a way to fix it's Ive tried different headphones so I know its not them.
    If not I may buy the C00 as that looks quite good but dont want to unless this one can be fixed
    Thanks for any help
    Mat

    If not broken then it could well be just dirty. (either the plug or socket or both)
    It does sound like you may have poor electrical contact.
    Not sure how best to clean the contacts, but you could start with a clean dry
    cotton cloth (for the plug) and make sure there is no grease or grit in there.
    Perhaps clean the plug, insert and remove it a few times, clean plug again,
    and so on.
    Do it carefully though, and don't make things worse by using the wrong cleaner etc
    if you go down that route...
    Hope that hel
    ps.

  • Muvo 2 4gb probl

    My muvo starting acting strange at school, wouldnt recognise it on the computers(3 differant ones) etc
    When i got home i tried on my computer to find it doing the same but now also if you push the usb cable too far into the player it turns off my computer and removes power to all the other devices.
    I need the information on it as it has my coursework on which has to be handed in by next mon.
    Player works fine other than that.
    Please help

    It sounds like the player has a hardware fault and is shorting out the USB. The only option you really have is to get the player repaired, and it's very unlikely you'll get the same player back. It's best *never* to trust an MP3 player with crucial data files.

  • MuVo Nomad(?) probl

    Hello, I own a MuVo Nomad(?) 28MB MP3 player. Alot like this one --> http://www.amazon.com/gp/product/B00006JHWQ/ref=nosim/02-0996-384052?n=72282
    The problem I am having is that when I put a *fresh* battery into it, it does not turn on. And what worse is that even when I plugged it into 3 OTHER computers, it wasn't recognized AT ALL. This just happened one day and it upsets me. It was never dropped or otherwise molested. I am running XP and I'm sure all 3 other computers were too. I bought this player from a friend, so I don't have any warranty. Any ideas? Thanks in advance!

    Not sure what the battery has to do with it. The Nomad has to be detached from the battery case to be able to plug into the computer.
    Gi'ven that nothing else has worked I will give it another shot.
    Well, that did not work either. The update failed on the same error.
    Rant:
    The Zen Nano I got yesterday to replace this is hosed up. Lasted 45 minutes in the gym last night. It just automatically shut off. Now whenever I connect it to the computer it automatically comes up as a player recovery device. Tried the firmware update and reformatting the dri've. Then it just went into an endless reboot cycle. CL tech support said to return it. Back to the store for a new one.
    My little Nomad lasted for years without so much as a flinch. It has been through hundreds of hours in the gym, several trips into the operating room and recovery, and countless hours of fishing on the ri'ver. It has been dropped and had a baby slobber on it. It always worked perfectly without question. My Nomad was nearly indestructable until it met a kid with a magnet. What happened to the quality of these devices?
    That Zen Nano was made in China and could not make it through a single workout. The Nomad was assembled in Korea and lasted for years. I really wonder if that has something to do with it's
    Oh well time to get off my rant and dri've back to the store.

Maybe you are looking for

  • Two Ipod minis on one computer???

    I just installed a second Ipod mini on my computer for my husband and I was able to download all his music onto it. But when I went to update my Ipod, iTunes doesn't recogize my Ipod now. What do I need to do to be able to have two iTune programs tha

  • Clarification on Select statement

    Hello all, can u please any one tell me the solution. In one condition. i am getting the data from marc mkpf and mseg my requirement is get the material number from marc based on plant on selection screen get some data from mkpf table based on postin

  • How to get rid of French on Adobe Acrobat.I need English to use this software on my brand new laptop

    Hi, I need English instructions for my Adobe Acrobat, I have a brandnew HP laptop with windows 8. Do I just need to simply unistall and reinstall the soft ware from Adobe site? Bapak Daud

  • Goto functionality (query to query)

    Hello, I created two queries. With transaction "rsbbs" I refer one query as sender-query and the other as receiver-query. If I execute sender-query, for most of characteristics the functionality "Goto" works fine. That means data will display in rece

  • Use JSF with Portlet JSR 168 Specification

    Hi I need to know.... is possible run JSF application with Portlet Specification JSR 168, using Pluto Portal and Apache Tomcat ??? Best Regards Mauricio