Muvo 200 and compatibility with subscription services (Napster to

Hi
I bought an muvo v200 as a christmas present as it displayed the "plays for sure" logo on the box. However, on reading the documentation and online stuff it doesnt look as if the device is compatible with subscription services.
Can anyone confirm this please...or better still tell me there is a firmware u/g available somewhere. If it isnt going to work, then I am confused by the meaning of the "playsforsure" logo on the box.
Thanks for your help.
DaveBP

None of Creative's memory-based players is compatible with Subscription services. If you look into PlaysFor Sure a bit more you will see that there are 2 parts to it - Download and Subscription.
Creative display the PlaysForSure logo because it is compatible with the Download part of PFS.
PFS was devised by Microsoft and there is more info about it at www.playsforsure.com.
PB

Similar Messages

What makes a player compatible with subscription servic

Hi all, this is my first post. I've been a Rhapsody subscriber for a year, and I want to upgrade to Rhapsody To Go. I have a MuVo TX FM, which is not compatible. What makes these things compatible or incompatible with subscription services? I just bought it last year, and I really don't wanna have to buy a new player just to transfer music thru a subscription service. Can anyone tell me if a firmware upgrade is in the works to make the MuVo compatible? Thanks very much,?Ed

...snip...
You want to stay away from recordable-DVD and hard-disk camcorders,
...snip...
Hope you don't mind me asking why? - As long as they've got a F/W connector how does the source media make any difference? - In fact, I would think that shuttling around would be faster with HD's or DVD's.....
I also believe the salesperson was trying to say that he's going to need a BluRay deck in order to be able to view his HD material on an appropriately equipped TV - Which is correct, no?
Thanks in advance for any comments,
Cheers,
Ian
MBP 2.16G / 2GB FCE 3.5 Mac OS X (10.4.9) etc etc

Problems with Apple Preview filled forms and compatibility with Windows?

Anyone else having problems with Apple Preview filled out forms and compatibility with Microsoft Windows after Lion?
I've had it happen recently with two different people, where the data I had entered on a fillable PDF form could not be seen by Microsoft Windows, but I saw my data just fine.
I don't know what version of Adobe Acrobat they were running.
Thanks,
kt

You will get that first message when the document has been changed in a way that invalidates the internal digital signature that's applied when a document is Reader-enabled. Certain changes are allowed (e.g., filling fields, commenting, signing) and will not invalidate the signature, but others are not. The exact cause of the change is often hard to track down, but it can be due to font problems, some type of file corruption, or something that Acrobat/Reader attempts to correct when the file is opened/saved. You will also get the message if the users system time is not correct and is currently set to some time before the document was Reader-enabled. It seems best to use the most recent version of Acrobat to enabled the documents and recent versions of Reader to work with them.
It problem is probably not related to the user using anything in the Sign pane.

How can I authenticate and authorize with Web Service on ESB ?

Hello,
I want to authenticate and authorize client with Web Service published
by HTTP/SOAP BC.
Simply if it is an Web Service as J2EE application, I will use
Basic Authentication with JAX-RPC and Realm.
But I think that Web Service published by HTTP/SOAP BC is not belong
to J2EE Application. Threre is no place to describe security role mapping
(like web.xml).
JBI 1.0 the section "5.5.1.1.3 Normalized Message Properties" comments
JAAS Subject is given in the NM Properties. Really in this package
com.sun.jbi.internal.security.*
implements JAAS autentication and authorization (at JaasAuthenticator).
But I can't see how to configure my Service to use this.
How can I authenticate and authorize with Web Service on ESB ?
I referred to the resources.
Mutual Authentication for Web Services: A Live Example
http://developers.sun.com/prodtech/appserver/reference/techart/mutual_auth.html
XML and Web Services Security
http://java.sun.com/j2ee/1.4/docs/tutorial/doc/Security7.html
JAAS Authentication Tutorial
http://java.sun.com/j2se/1.4.2/docs/guide/security/jaas/tutorials/GeneralAcnOnly.html
Thanks,
Takurou
- environment ---------------------------------------------
OpenESB : Project Open ESB Starter Kit
AppServer : Sun Java Systems Application Server 9.0 PE
OS : Windows XP
I don't assume to use SSL (if It's necessary I will try).
User information is stored in a LDAP Server.
-----------------------------------------------------------

Hello,
I read this resource.
SecurityDesign
http://www.glassfishwiki.org/jbiwiki/Wiki.jsp?page=SecurityDesign
Then I think [non-ssl and ssl/tls and so on] securing by basic authentication is ongoing feature at this time.
But I can't see well why this page comments 'HTTP over SSL, TLS'.
HTTP/SOAP Binding Component Overview
http://download.java.net/general/open-esb/docs/jbi-components/httpsoap-bc.html
Does BC support only "SSL server authentication" ?
Doesn't BC support "SSL client authentication" by username/password ?
Thanks,
Takurou

Appleworks docs and compatibility with iWorks application?

Appleworks docs and compatibility with iWorks application? Does it exists? I do not have iWorks and will soon be upgrading my op sys to 10.4 (it really is in the mail) I currentl have 10.2.8
I use AppleWorks a great deal. Does iWorks replace it? or enhance it?
Will AppleWorks be upgraded or is 6.2.9 the last iteration?

Welcome to Apple Discussions SYGWS
iWork (no "s") is not an application, but the name given to the package of two applications, Keynote & Pages.
Keynote is a presentation application that can open AppleWorks 6 presentation files & PowerPoint files. I haven't use Keynote other than to view a few presentation. You probably can find a lot of information by searching the Keynote forum.
Pages is the word processing/page layout application in iWork. Pages is able to open AppleWorks 6 word processing document as well as Word, text & RTF documents. It is not able to open any other AppleWorks documents or older Word documents (I'm not sure how far back it goes). Pages 1 (iWork '05) will not display floating spreadsheet frames in AppleWorks 6 word processing documents, Pages 2 can. Pages 2 has limited spreadsheet functions available in tables (as does Keynote 3, both in iWork '06). Pages can export as PDF, Word, plain text, RTF & HTML (HTML export is disappointing to say the least). It cannot export as AppleWorks (any version).
No one here knows for sure if AppleWorks will ever get another update & those that do have signed non-disclosure agreements, but it is extremely unlikely. In the iWork ’05 press release iWork is said to be "building the successor to AppleWorks."
Many users here, like me, use Pages for what it does so well & AppleWorks for what it does that iWork doesn't (at least not yet) - databases, spreadsheets & drawing.

Unable to register Hyperion Reporting and Analysis with Shared Services

Hello everybody,
I'm trying to install and configure Foundation Services in order to schedule Brio Query documents execution and distribution.
IBM DB2 Express has been installed and configured.
Shared Services have been installed and configured.
Reporting and Analysis - System 9 Services have been installed and not yet configured.
Reporting and Analysis - System 9 UI Services have been installed and not yet configured.
When proceeding with Hyperion Reporting and Analysis configuration in registering with Shared Services, provided with the same host, port, user profile and password used for configuring Shared Services, I get the following message:
"An unknown CSS error occured.
Please check that the information entered is correct."
Messages from configtool.log file:
"(Aug 21, 2008, 09:32:32 AM), com.hyperion.cis.config.CmsRegistrationUtil, DEBUG, Getting CSS instance
(Aug 21, 2008, 09:32:32 AM), com.hyperion.cis.config.CmsRegistrationUtil, DEBUG, URL for CSS.xml = https://itblq001.wincor-nixdorf.com:58080/interop/framework/getCSSConfigFile
(Aug 21, 2008, 09:32:32 AM), com.hyperion.cis.config.CmsRegistrationUtil, DEBUG, Authenticate LStoppa user to CSS.
(Aug 21, 2008, 09:32:32 AM), com.hyperion.cis.config.CmsRegistrationUtil, ERROR, Failed to authenticate user = LStoppa"
I can't understand what's happening. May you help me?
Thank you for every hints.
Regards
Lucia

The service runs until I try to confirm the registration while configuring HRA. Then it stops.
Apologies for the simple question, as I am trying to make the whole Hyperion System 9 running with little knowledge of it: how do I log to shared services?
Thanks

Planning Appl not able to register and unregister with shared services

Hi All,
I created a planning application before that I created a datasource. After crearting an application I got an error as Application not able to register with shared services .
And also I am facing one more issue that is if I delete any particular planning application at that time I got an error as Application not able to unregister with shared services.
I am able to open the planning application through http://<planningmachine>:8300/HyperionPlanning/AppWizard.jsp and its working fine. I am able to open the Shared Services though Workspace but I am not able to find the option for planning application.
Kindly guide me how to overcome it.
Thanks and Regards
ChiDam

Have you checked the logs? Found something?
This normally happens when there is issue with Planning app and cluster mapping. For some reason, the application maps to non-existent cluster in Planning system schema resulting in failure of HSS registration. you can manually re associate the cluster using configuration tool and try registering again.
Cheers..!!

DRM 11.1.2.1 compatibility with Shared Services v9

Hi,
I was trying to point my DRM 11.1.2.1 to version 9 of Shared services. It did not work out for me. If they are compatible, Do I need to do anything different compared to earlier version?
- DRM and Shared services are installed on different Windows servers.
- In the General tab, I am giving the shared services URL and port number.
- In the General tab, while I am giving the links to "jvm.dll" file and the Oracle Instance, Should that be the location on DRM server or Shared services server?
- In the Class tab, Do I need to give the location on JAR files in shared services server?
- Do I need to install anything at the location of Shared services server?
Thanks.

Hi Otein
If you go through the certification matrix for Interoperability between versions. I don't see FDMEE 11.1.2.3.500 listed to work with 11.1.2.4 .
Go to 11.1.2.4 Release Compatibility Matrix.
Thanks
Anjum

Xbox 360 controller (wired) and compatability with Windows 7

Ok, here's the scoop. I have an Xbox 360 controller and a plug 'n play kit for it. I have tried the normal solutions for hooking it up and getting it to recognize in Windows 7 (32 bit) Home Prem. Edition, and all I get is it is an 'Unspecified' device in the Control Panel, and as a result, it will not be recognized in games as a controller, and will not work. I have installed the proper drivers and the 360 Accessories for Windows, but even that doesn't recognize the controller when it is plugged into my USB 2.0 port. The driver is properly installed (Windows told me the driver was installed correctly when I first plugged in my controller, after installing the program from the Microsoft website), so I have no idea why it is not working. I have followed all the stepd that I can find. Please give me some assistance.

If you already have the software installed, go to programs and features and uninstall Microsoft XBOX 360 Accessories 1.2.
1) Download the drivers from http://www.microsoft.com/hardware/download/download.aspx?category=gaming
2) Choose Gaming > Xbox 360 Controller for Windows > Windows 7 64 bit > English.
Don’t run the drivers. Save them to a folder.
(Or Xbox 360 Wireless Controller for Windows depending on your controller)
3) Right click the Xbox360_64Eng file in the folder you downloaded to and click "create shortcut"
4) Right click the shortcut you created. Select properties.
5) On the compatibility tab in properties, click "Run this program in compatibility mode"
Choose Windows Server 2008 Service Pack 1 as the compatibility mode. Apply setting and click ok.
6) Right Click on the shortcut and select "Run as administrator"
7) With your controller plugged in go to Device Manager.
You should see Microsoft Common Controller for Windows Class. It located under Mice and other pointing if you do, you have arrived. If you don't, try this.
Continue only if you don’t see Microsoft Common Controller for Windows Class in Device Manager
8) Right click the unknown device that shows a problem.
9) Update Driver Software > Browse My computer for Driver Software > Let Me Pick from a List of Drivers
10) Choose Microsoft Common Controller for Windows Class > XBOX 360 Wireless Receiver for Windows
Ignore the warning.
Should work now.
Please help :( It's still not working! Your suggestions helped almost everything. I don't think there was the Microsoft Common Controller for Windows class/Xbox 360 Wireless Controller via Play and Charge Kit in Device Manager before I tried
your tips of reinstalling under that old service pack compatibility mode.
Now that I see that, I thought it'd be fixed... but no! If I run joy.cpl (the Game Controllers window) it still doesn't see my Xbox controller. It still isn't recognized by the actual 360 controller software for my PC.
I did try updating the drivers again in the device manager, and I am plugged into a Blue USB port. What else? Is it something to do with my battery pack or something? Help!!
I don't know if this will notify me of a response, so please feel free to email me at smorin1487 @ gmail

Single Sign On and Application with Web Services

My Application Server is set as partner application for SSO so for example this address: http://myserver:80 is SSO enabled.
I have two ADF applications on it with jspx pages and the ADF security is enabled on them. SSO works for these applications (for jspx files).
I added a new application with a web service and deployed this new application. It is on the same application server as those two applications and its security provider in identity management, SSO enabled. Its address is something like:
http://myserver:80/newWebService-Project1-context-root/MyWebService1SoapHttpPort
So I expect to be unable to test web service, but I can and I am not prompted for user name and password.
Regards
Farbod

Thank you.
Yes I had cleared the cache and in these cases I always use a new browser also.
I deployed a third application without declarative security options (ADF application, no security settings) and this application also didn't ask me for user information though it was under SSO.
Regards
Farbod

HEY MSI. READ THIS (regarding ICH5R and compatibility with WD Raptors)

The following issue has not been resolved. Seems like several people have given up and are just using the onboard Promise controller.
Thread on issues regarding WD Raptors configured in RAID via ICH5R
Does it not suprise you that nobody is using Raptors on the ICH5R?? hmmm?? (Maybe because they can't.)
I have requested RMA service with Western Digital to try different hard drives. Now I am on my 2nd RMA. If it does not work (even with both drives using the B5P bridgechip) then IT IS CLEAR THAT YOUR MOTHERBOARD WAS MANUFACTURED WITH A DEFECT. And thus people using this board who want to use RAID with 2 Raptor drives on the ICH5R should be entitled to a replacement board or even their money back. I AM NOT JOKING. I think it's something quite serious because the need and demand from users are being neglected and it seems as though MSI won't bother trying to resolve this issue and hopes to silence this issue by ignoring it.
Mods... please do not delete or lock this thread. And people who are still in the same boat as I am and are just about to give up or have done so already... please let your voices be heard here!
When I get my 2nd replacement Raptor (hopefully it's a B5P) I will do further testing and let everyone know if it solves the issue.

Interestingly, I bought my raptors before I came across this thread, and found that I had problem of having my raptors being detected by the ICH5R. At that time, I also have a HighPoint 1520 Raid PCI card on my mobo.
Guess what, after I removed the HighPoint 1520 Raid PCI card, I am able to have my raptors plug to the ICH5R connectors and being detected. I'm running it at Raid 0 now, as my boot drive.
The two raptors' DCM is HBCAJAB, not sure if this information is useful. Both drives were made in Malaysia.
The thread I am referring to https://forum-en.msi.com/addreply.php?threadid=43273&sid=.

SAP ERP 6 system and compatibility with BW systems.

Hi All,
An upgrade to a ECC 6.0 system form 4.6C or 4.7 system is fine. But however, in an integrated environment - the 4.6C system is usually integrated with other SAP Products as well.
The question I have is is a ECC 6.0 system compatible with BW 3.5 or lower versions of BW - i.e. when I upgrade my system to an ECC 6.0 system can these systems still talk in between themselves, or I have to plan a upgrade for this?
If the answer is yes - is it mentioned in any SAP Note/ Website or Document as because I also need an artifact to support the answer.
Thanks, Dibya

Hi Dibya
the component lists (from service.sap.com/scl) document for each release, which product instance is needed for which process (i.e. ECC and NW - BI). This source includes information about old releases as well, but not about mixtures between releases.
In the Upgrade Dependency Analyser will you find information about these mixtures (see for instance: SAP Network Blog: New Tool for Planning Your Upgrade: The Upgrade Dependency Analyzer : New Tool for Planning Your Upgrade: The Upgrade Dependency Analyzer)
regards,
Andreas R

Unable to call, reach and connect with Customer Service

How come every time I call *611 or 18009220204 from my cell phone. It directs me to the *611 app. Then at the very bottom of the app, it says "call customer service" then I'm directed to enter my billing pin. Then it just cycles after I enter it back to the *611 app. Why am I unable to call customer service any more?? Very very frustrating. This app definitely has a glitch obviously and I need to speak with someone.

yes i can make calls to everyone..except verizon. i have the samsung droid charge. what is this new *611 app all about. i'm not interested in even having to view it, just so i can scroll all the way down to call customer service and ask to enter my pin..time consuming. and even more frustrating that i still can't speak to anyone.

IE 8 and compatibility with Officejet J6480 All-in-one

I have the above Officejet J6480, connected via USB, XP operating system and earlier this year after installing IE 8 I found that the printer was not compatible. Therefore I went back to IE 7, and have been awaiting news from HP that the compatibility issue has been resolved, but I haven't heard anything. It would seem that installing IE 8 would be a good move if it is compatible with the printer.
Questions:
Is the Officejet J6480 now compatible with IE 8 assuming I have updated my printer software from the HP site?
If not, what do I need to do in order to use IE 8?
Is there any reason not to go to IE 8?
Thanks for your help....

What version of OS X? What router?
Get the latest software for your printer from the "Support & Drivers" link at the top of this page.
Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
I am employed by HP

MSI GX660R with intel motherboard and compatibility with Samsung 840 EVO SSD

Hi
Im am new to this forum, so I apologize in advance if this post is in the wrong section.
I am considering to replace the hard drive in my MSI GX660R with a Samsung 840 EVO 250 gb ssd, since it has the best benchmark ratings and are very afordable. My laptop has an Intel motherboard with an i7 core processor.
My question in relation to the upgrade is, whether the laptop is compatible with that excact ssd. I plan to run it in AHCI mode, since I have bad expirience with loss of data under RAID. If i chose to run the extra HDD as a secondary drive, it will therefore still be under AHCI.
Can anyone refer me to some sort of compatibility list, or tell me if the above mentioned drive is compatible? I havent been able to find out myself, and MSI is farily difficult to get in contact with.
Any help is appreciated.

Yes, your early 2013 Retina model uses 6.0 Gbps SATA but it's not a standard mSATA connection. You could upgrade using Transcend's JetFlash -> http://www.transcend-info.com/apple/jetdrive/ - to space up to 960GB, however.
Clinton
MacBook Pro (15-inch Late 2011), OS Mavericks 10.9.4, 16GB Crucial RAM, Crucial M500 960GB SSD, 27” Apple Thunderbolt Display

Muvo 200 and compatibility with subscription services (Napster to

Similar Messages

Maybe you are looking for