Muvo C100 Sport SD - MMC Card Problem

Hi there,
i recieved my new MuVo C00 Sport a few days ago! I have a big prob with external memory cards.
tried sd and mmc cards with 52mb. the player does not initialize the cards after "power on"...
jumping to the external card shows the info "no music"! after plug out and in of the card while the player is on,
the card gets readable...
is this a firmware bug? i have testet 3 different 52mb cards (sd and mmc). this is no good news, cause i do not want to plug the card every time i turn the player on, even when i go out for a run!!!
can anyone share his experiences with me about that?
thanks,
iron_muvo

Hi all.
I have also unfortunatly had the same problem with my sandisk 52 card, when I try and access the card through the player it will only read as 'no music'. Also the Muvo C00 does not even read the size of the card or free space, only that it is there I have also tried formating in FAT/32, to no avail.
"If I have no music on the internal memory, after I turn it on, it stalls for about 30sec-2minutes then it displays "No Music". If there is music on the internal dri've, then it plays from the internal dri've and then says there is no music in the external<FONT color=#ffffff> card. The only way I can get it to work is by turning the player on, then inserting the card. It reads almost immediately with this method. After I restart it, then it won't read at all. It's very frustrating. I know it should work, but it won't.".......
Despite the issues I am still keeping the player as it fits me needs nicely, and of course I expect Creative to support this product like any other sooo I can wait for the fix that is sure to come.
Peace

Similar Messages

MuVo C100 Sport and KingMax SD Card Prob

I just bought a MuVo C00 about a week ago and I love it. I already upgraded the firmware and had no problems doing it.
The problem I have is that it doesn't seem to like the KingMax Secure Digital Cards I have. I have about 3 52MB Kingmax SD cards that I use with my Camera, PDA, and my former MP3 player. I've used these cards in those devices for about 5 months. I had hoped that I could just pop it in and get going. No such luck.
If I have no music on the internal memory, after I turn it on, it stalls for about 30sec-2minutes then it displays "No Music". If there is music on the internal dri've, then it plays from the internal dri've and then says there is no music in the external card.
The only way I can get it to work is by turning the player on, then inserting the card. It reads almost immediately with this method. After I restart it, then it won't read at all. It's very frustrating. I know it should work, but it won't.
I've tried reformatting it in both FAT and FAT32. No luck.
Has anyone had any experience/problems with the KingMax SD card with any of their devices? The Kingmax cards are all VERY thin compared to other brands.
At first, I could only think that it has something to do with losing connection but that doesn't make sense since the player shouldn't read at all after inserting it. Why wouldn't it read after that if it hasn't moved at all?
What brand of memory should be considered safe for use with the C00?

Hi all.
I have also unfortunatly had the same problem with my sandisk 52 card, when I try and access the card through the player it will only read as 'no music'. Also the Muvo C00 does not even read the size of the card or free space, only that it is there I have also tried formating in FAT/32, to no avail.
"If I have no music on the internal memory, after I turn it on, it stalls for about 30sec-2minutes then it displays "No Music". If there is music on the internal dri've, then it plays from the internal dri've and then says there is no music in the external<FONT color=#ffffff> card. The only way I can get it to work is by turning the player on, then inserting the card. It reads almost immediately with this method. After I restart it, then it won't read at all. It's very frustrating. I know it should work, but it won't.".......
Despite the issues I am still keeping the player as it fits me needs nicely, and of course I expect Creative to support this product like any other sooo I can wait for the fix that is sure to come.
Peace

Muvo C100 Sport Firmware update FAIL

I tried updating to MuVoC00_PCFW_LB__0_0.exe and it gave me some obscure message about a semaphore timeout and now the c00 won't even power on. of course since it won't power on it can't been seen by windows xp. it is DEAD! i've tried removing the battery and holding the menu button while replacing the battery; NOTHING!
How can I bring this thing back to life?
thx

I'm not sure what the recovery mode is for the C00, and if it differs from the other MuVo players, but it sounds like you ought to contact Creative Support direct.

Problem with new mmc card

Hi. i hope someone can help me. Just bought on contact a nokia 6630. Its very good. Decided to but a rs mmc card of 512 mb for more data storage. Problem is the phone doesnt see it. Any ideas on what i need to do. Thanks Andy

Just an "MMC for mobiles" is not enough. It must be labeled exactly (letter-for-letter): "MMCmobile" (or "DV RS-MMC"). Other types of cards do not work.
If it is of correct type, then check that you put it in the card slot the right way (the card's connector surfaces upwards) and far enough (to "click" in place).
If even those don't help, check that the phone's "Memory" app sees the card and lets you format it (in case it for some strange reason or another wasn't formatted).
If that's not enough, then you have either a broken card or a broken phone.

Problem Reading MMC Card

Kit
===
Nokia 9300i
Nokia 9300
MMC+ Card - MobyMemory 1GB
The memory card has worked perfectly on both phones until recently. Both phones no longer recognise the card and all the Memory Card drop down menus are now inactive. However, when the card is plugged into a USB2 Card Reader in my computer, the card can be read perfectly. I reformatted the card on the computer (using FAT and not FAT32) but the phones still refuse to recognise the card is there.
Any ideas on how to solve this problem is greatly appreciated.
Best regards,
DB

I've had this problem when I've not inserted card correctly - but seems odd in your case if it doesn't work on either.
Have you tried restarting both phones (eg remove batteries?

6230i memory card problem

I've recently resurrected my old 6230i and begun using it again. However in doing so I've come across a wee problem.....
The big memory card that was supplied with the phone and hidden beneath the battery is only 32Mb - hardly sufficient to use the MP3 Player to any great deal. Looking at it I asserted that it was an SD type card and I went and bought myself a 4Gb one to fit in place of the measly 32Mb effort. Imagine my annoyance when, after buying the new memory card I couldn't get it to fit - it's just slightly too thick. On closer inspection I noted that the card I've bought is actually an SDHC card - but surely that shouldn't make any odds? Would it? Do I need to buy a stricly SD card, without the wee HC ad endum? Or, do I need to buy a smaller capacity memory card, possibly a 1Gb or 2Gb, in the hope that it's of equal thickness to the 32Mb one? Or, knowing my luck, am I just doomed not to get a memory card that fits because in actual fact there isn't one, because Nokia have played a huge trick on the unsuspecting 6230i purchasers????
I await your wisdom dear forum members.
ps......I humbly apologise if this question has already been asked countless times before!!!
Kind Regards,
Paul-D.

The slot in the phone is for an MMC card. It may look like an SD card but not quite the same. Please do check with the card manufacturer for compatibility before buying. The phone is very old and may have compatibility issues with the higher capacity cards nowadays.

Nokia "Original" RS DV MMC cards

I've got a Nokia E60 and uptil now I've had a 256MB Yama or something like that RS MMC card for the phone, which was working great, it was fast in read/write operations. Not long ago I purchased one from Nokia, the so called "Original Nokia". Well I have to say that I'm very dissapointed by the write times for this card (and I have to say that it's not the first time I have an Original Nokia MMC Card. Writing operations take 3-4 times as long as on the 256MB one. What gives? Does anybody have a solution for this strange problem? I've already tried to format this in my phone but the result is the same
br
blesio

thx guys for your replies.
I bought one , a very known mark but doesnt work.!
It is MMCmobile (DV-RS-MMC comp with 6630)
I put it at my laptop and works fine.
When i put it at my mobile doens make any sound(when i close the 'tray') and doesnt recognize the card( NO M.card installed ).
I try it at 6630 and N70 both.
And the mobiles are working already with some others m.card.
But the cards works at my laptop!
I have formatted with FAT but still nothing
Any suggestion ?

Integrated SD/mmc card reader

I have a strange problem with the integrated sd/mmc card reader on my laptop. I know I have everything correctly configured and the needed modules loaded because I can use a 16MB and a 128MB SD cards without any problem. When I insert any of them udev creates the devices:
From /var/log/messages.log
mmcblk0: mmc0:1d00 SD016 14560KiB
mmcblk0: p1
mmcblk0: mmc0:4125 SD128 123008KiB
mmcblk0: p1
and the devices:
ls -l /dev/mm*
brw-rw---- 1 root disk 254, 0 abr 10 17:14 /dev/mmcblk0
brw-rw---- 1 root disk 254, 1 abr 10 17:14 /dev/mmcblk0p1
I can mount the second device and access to the card.
But if I use a 256MB or a 1GB card udev does not detect them and does not create the mmcblk devices. Also no messages in the logs. Any idea of the reason?
The only log is when I remove the card:
mmc0: Card removed during transfer!
mmc0: Resetting chip
Some days ago I was still using Slackware and I could read these two cards. The kernel was a 2.6.17, so it may be a bug in the 2.6.20 kernel?
The card reader is a Winbond W83L51xD and the modules required are mmc_core, mmc_block and wbsd.

So this is what my /etc/modprobe.d/mmc.conf contains:
options sdhci debug_quirks=0x40
options firewire-ohci quirks=0x10 debug=0xf
and now, on reboot, when loading user-specified modules, I get the same error:
mmc0: Unknown controller version (16). You may experience problems.
and this is what dmesg says now:
Feb 12 21:43:17 localhost kernel: [ 5.253868] sdhci: Secure Digital Host Controller Interface driver
Feb 12 21:43:17 localhost kernel: [ 5.253873] sdhci: Copyright(c) Pierre Ossman
Feb 12 21:43:17 localhost kernel: [ 5.261558] sdhci-pci 0000:06:02.2: SDHCI controller found [1217:7120] (rev 1)
Feb 12 21:43:17 localhost kernel: [ 5.261577] sdhci-pci 0000:06:02.2: PCI INT A -> GSI 16 (level, low) -> IRQ 16
Feb 12 21:43:17 localhost kernel: [ 5.261602] mmc0: Unknown controller version (16). You may experience problems.
Feb 12 21:43:17 localhost kernel: [ 5.261807] _regulator_get: 0000:06:02.2 supply vmmc not found, using dummy regulator
Feb 12 21:43:17 localhost kernel: [ 5.261874] Registered led device: mmc0::
Feb 12 21:43:17 localhost kernel: [ 5.262941] mmc0: SDHCI controller on PCI [0000:06:02.2] using PIO
Feb 12 21:43:17 localhost kernel: [ 5.293700] firewire_ohci 0000:06:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
Feb 12 21:43:17 localhost kernel: [ 5.293710] firewire_ohci 0000:06:02.0: setting latency timer to 64
Last edited by sergiuniculescu (2012-02-12 20:50:16)

MMC card and MP3 player - 1/2 capacity after format?

Hi,
I got an MP3 player (1 Gb) and a MMC card (2 Gb) and after format in a USB card reader from OS X 10.4.7, they are now 512 Kb and I Gb respectively. MS Dos or Mac format doesn't matter.
Is it a USB 1 or 2 problem?
Any one know about this?
EF

Well I have solved the problems and I post here in case others encounter them.
The MMC/SDC card was fixed by getting a true USB 2.0 card reader, the one I had was about USB 1 & 5/8 ths.
The MP3 player was a rip off, sold as 1 Gb but really only 512 Kb see:
http://forum.s1mp3.org/viewtopic.php?t=873
cheers
EF

Pavilion g6 series SD-MMC card reader NOT working

I have Pavilion g6 series. My SD-MMC card reader isnt working. How to fix?

Downloading this driver should sort out the problem!
http://download.gamblis.com/2011/03/30/hp-pavilion-g6-1a69us-notebook-realtek-card-reader-driver-6-1...

Satellite M40: card reader doesnt recognize RS-MMC cards

I have a problem with the card reader,if i insert a RS-MMC card this does not recognized and windows crash.
SD or MMC cards functions perfectly.
The card reader is damaged?

you can do the following:
push your rs-mcc card into the slot without the adapter, you will need a pencil or sthg like that to push it far enough..
then your notebook will recognize it
you can pull out your card again by shoving the adapter after it in the slot, when you hear the clicking sound you can pull the adapter with the card on it out of the slot
(when i put the adapter on the card before, and put the card then into the slot, it didnt function at all, seemed like the card couldnt be pushed deep enough into the slot due to the adapter)
at least it worked for me, i had the rs-mcc card and the adapter from my siemens s65 mobile phone
besides, though this procedure might sound a bit rough, it didnt seem to me that it did any harm neither to the adapter, nor to the card + slot

MMC cards / Palm

Has anyone been successful with running a MIDP application on an MMC card with a Palm?
An m500 Palm instantly crashes when I try to run the application. It displays an error message stating a failure with MemoryManager.c. I have to then reset the Palm. The MIDP application runs fine when it isn't placed on the MMC card.
If you have had any success, can you tell me if you needed to do any special configuration to the Palm or the MIDP application? What type of Palm were you using? Have you come across any other know issues about this?

Has anyone been successful with running a midlet on an MMC card in a Palm M500? If so, what version of Palm OS were you using? I am using PalmOS 4.0. There isn't any upgrades yet for this Palm. The MMC card is 32 megabytes.
When I run the application, the Palm returns an error to me. The error states that there is a problem with the memory manager. It looks as though somewhere in the Palm code, an error has occured and they are doing a "printf" on me.
If you have been successful, were there any special modifications you had to do to your code? Or were there any settings you had to modify in your Palm?

MacBook Pro 15" video card problems (i think)

Can anyone tell me if this is indeed a video card problem?
MBP 15" info (Dec. 2011)
Processor 2.4 GHz Intel Core i7
Memory 4GB 1333 MHz DDR3
Graphics Intel HD Graphics 3000 384 MB
OS X Lion 10.7.5
This is what happened:
I use my mbp heavily because I edit a lot of videos with Premiere. I also use lightroom / photoshop alot + games. I also installed Parallels desktop late 2013. I don't know if that is relevant but anyway. Everything started late 2013 (a little after installing parallels actually) when there are moments when the audio wouldn't work and I couldn't adjust the volume. It would come back anyway so i didn't mind it. Then the fans were on high speed for little activity. After that the keyboard backlight couldn't be adjusted and wouldnt work. I ignored all of these cuz i wasn't troubling me at the time. In January i left for france to study - I use bike all the time and once stupidly placed my laptop on the basket going to school (rough roads). I had a class with html so I had to open Parallels, my teacher pointed out the fans and how loud they were. That day, parallels desktop said i must upgrade to windows 9 or it will restart every 2hours. I didn't of course. I didn't have time to.
After that (a few days later i think) my laptop would randomly turn into a black screen but it's still on (the power LED is on) I tried turning it off by pressing down the power button and then turning it back on. It worked the first time. During the first week, the frequency of it happening grew. It would do it almost 3 times a day. during that same week I tried to do an SMC reset. It fixed the keyboard light, fans and audio but not the black screen thing. It just keeps on happening around 1-3 times a day. It only happens when I'm using it btw, never when I just leave it. ALSO, after a few days, it would take longer hours to open my mbp again. I mean, the screen would turn black. i would turn it off, then on again. I will ONLY hear the hard drive moving but no startup sound and no grey screen and apple logo. nothing.
The following weeks after that, I asked a friend to help me out. He suggested that I install gfxCardStatus because he said it might be my video card. He instructed that I keep it on intergrated only. So I installed that and did what he said I thought it worked for a while because the black screens stopped happening (even when gfx keeps on going back to dynamic) BUT NOW, MY LAPTOP WOULD FREEZE (not turn black). I'd shut it down using the power button but it still takes me hours to open it again. Sometimes, I'd wait for the battery to drain because it would startup when i charge it (sometimes)
I tried doing AHT as well to confirm the video card problem, but the results are no problems found. I really don't want to replace my logicboard here in france. everything is more expensive here. ;__;
Today I uninstalled parallels to see if that might have had anything to do with my problem now but i think that's just wishful thinking.
Can somebody tell me if this is really about the video card? Thank you

Your appointment at the genius Bar in an Apple Store (anywhere in the world) for an evaluation is FREE, in warranty or out. Those guys put their hands on these Macs all day every day, and they are especially good at Physical and Power problems.
Ask them.

Graphic card problem maybe? Since when I have changed the hard drive to my macbook pro and I installed all the new softwares, my mac is very slow and the screen gives crazy pictures,could maybe be the graphic card, does anybody have experienced this?

Graphic card problem maybe? Since when I have changed the hard drive to my macbook pro and I installed all the new softwares, my mac is very slow and the screen gives crazy pictures,could maybe be the graphic card, does anybody have experienced this?

after a restart it works for a time, but always slow. I went to the Applestore this afternoon and the made a check and said it would be the logicboard and they would have to change it for CHF 600 and it would be ready in 10 - 15 days

Credit Card problem

Hi,
Due to to the Adobe securety problem, I requested a new credit card from my card provider and updated the payment details 24th of October.
The card was debited by Adobe the 25th, but still, I get a warning when I start a CC app stating that there is a problem with the payment and CC will stop wotking in 13 days. Adobe has recieved my money so please fix this asap.
I have been in contact with Chat-support two time, but no help from them
/Stefan

After many,many, many hours of trying I was finally not refused when trying to connect to your payment server (as a first time buyer). So I was asked for my credit card details for the purchase of an application - which I stated. But when I tried to confirm the purchase, my VISA card was refused twice due to "Credit card error". As I know there is nothing wrong with my credit card, please tell me what to do in order to purchase applications from the ovi store. I don't want to pay many times over for an application which I never downloaded from OviStore. But I anyhow also tried my AmEx-card for the purchase of another app, but same "Credit-card" problem. To say that "I am not amused" with my OviStore experience so far must be the understatement of the century.

Muvo C100 Sport SD - MMC Card Problem

Similar Messages

Maybe you are looking for