Muvo² fm media error fixed
everytime i booted my muvo? fm 5 gb it automaticly went to the recovery mode and whatever i choose in the recovery mode it said: media error
pc wont even detect the player
but i fixed it (god tnx)
this is what i did:
i tried to format my muvo?fm 5 gb in the recovery mode but it freezed
i plugged the adapter in cuz the battery was low and i let the muvo? FM ''formatting'' the whole night!!
in the morning it was still ''formatting''
i unplugged the adapter, rebooted my muvo? FM and it said: firmware error..
after that the recovery mode came up
i ''deleted'' the firmware in the recovery mode,
formatted it in the recoovery mode,
plugged it to the pc, formatted the muvo? FM on the pc
reinstalled the firmware
and copied my music on it and it worked fine =D (WOOT)
now it works perfectly
i hope this works for you too guys
ps: try it at your own risk
Greetz, Coby
(srry for my bad english)
Thanks for letting us know. Media Error can indicate a damaged hard dri've, but it's useful to know a firmware update can also solve it.
Similar Messages
-
i am extremely new to the adobe premiere elements 7 program and i have been having some trouble using it. i am a high school football player and i am trying to take game films from our season and edit them to create a highlight film to send to colleges. I have been trying to import the games off DVDs copied by my coach. The DVD files are .VOB and from what i understand this is a supported format for this program. However, whenever i go to add the media, the files load and then the adding media window comes up but an error message comes up. This error window reads something to the extent of " add media error...The file type is either not supported or the prgram is missing a codec..." I know that the file type is supported so i figure that there is a missing codec. The weird thing is that occasionally after a few minutes, one of the files from the dvd will show up in the organize window. Only one file, not all of them (there are two files on each DVD, the first and second half of the game)will show up for SOME games. Can anyone give me insight into why i keep receiving this error or how i can fix the missing codec problem, if thats even the problem at all?
If one of those VOBs is VIDEO_TS.VOB, then that isn't anything you can use, and you'll get that error message. Menus have 0 at the end of the filename, VTS_01_0.VOB, and will import but they aren't anything you can really use.
Many people have problems working with files from DVDs, especially with audio being out of sync, and the recommendation is to convert the usable vobs to DV-AVI first:
http://www.adobeforums.com/webx/.3bc4800e -
hey there, reading previous post i think my muvo's kinda screwed?with the media error problem and should contact creative with my warrenty right?but the problem is my 2 months warrently period is over and i dunno where or how to apporach creative in solving this problem. would it be expensi've to repair this problem? and since i am no longer under warrenty i dun have the email support prevalige ( so the website says ) so.... what should i do? thanks
kcb22:
If you have already put a lot of files into the top-level (root) folder then you will not be able to create additional sub-folders. Delete some or all of your songs first from the player, create a folder structure and then put your songs back on, this time into the folders. You can get away with just one subfolder, called Music (or whatever) with all of your files in this folder.
I think I'm right in saying that the Muvo TX FM can only see down to the level of one subfolder; if you go deeper than this then the songs will not be seen bu the player.
PB -
"Missing media" error trying to share new trailer
My daughter is using iMovie for the first time on a new Macbook Air running OS X Mavericks 10.9.1 and iMovie 10.0.1. She imported the video clips from her iTouch to her iMovie library and used some of those to create a Trailer. She used the default music from the trailer template and only the video clips she imported from the iTouch to the Air's local hard drive. In "Library" view the trailer is visible and looks fine.
However, trying to share or export the movie in any form (Theater, Email, Quicktime) generates the following error message, "[TRAILER NAME]" has missing media. If you click Continue, your project will be exported without these clips." The one time I tried to export it looked like only the first video clip she used was converting - the entire rest of the trailer was gone...but it's still working in Library view.
I cannot figure out the source of this problem, nor can I discover the answer in the forums. (I can't even see which media the app says are missing??) I've seen advice on delete/reinstall but was concerned that the trailer might vanish if I exit the app.
Thanks in advance for any assistance on a fix.
Thanks,
BrianYes -- when I wrote "in library view" it referred to within the iMovie app, where you toggle between "Library" and "Theater".
OK, so I found the Movies folder and the iMovie library folder inside -- thank you. The "original media" sub-folder seems to contain all 50-odd .mov files that were imported from the iTouch (though, curiously, about half show the deafult QT thumbnail icon - playing any of those replaces it with an image).
The folder also contains a subfolder with the name of her project; in that there is a single file called "CurrentVersion.imovieevent" that I assume is what the app is playing in the library/project view. But no other clues as to why the Share contines to return the missing media error...
To make matters more complicated, she subsequently created a second Trailor and that all seems to be working perfectly. I have no idea what's different about the newer project, but maybe just the first (and, imho, much better) trailor isn't going to work...beginner's (bad) luck? :::sigh::: -
Just purchased Adobe Element 10 and when I try to import music I get an "Add Media Error"
When I try to import music I get an "Add Media Error" error message "The importer reported a generic error"
Are you working with both iPhoto and Aperture at the same time? If you have to maintain several iPhoto libraries in addition to your Aperture library you would profit considerably from updating to Aperture 3.4.
Aperture and iPhoto now share a uniform library format and you can easily switch between both applications when viewing a photo library.
Aperture 3 can run with 4 GB RAM, but would be better with more. If your mac is not maxed out with 4GB, you should consider to add RAM, since you are running Mt. Lion. All other apps wil profit from more RAM too.
I cannot test the interaction between iPhoto 9.4 and Aperture 2, since I have only Aperture 3 installations.
I am a little reluctant because i have only 4 gig of ram and have read numerous negative reports.
There are many happy Aperture 3 users, but people are only posting here, when they are temporarily unhappy. So you will get a distorted view.
The new version is out for only a few days, and Apple has the first bugs to fix. I'd wait a little, if you can, until the next release is out.
Regards
Léonie -
When trying to play a video on a TV stations website I get a gray box that states "Media Error Type Error 1009". The advertisement that precedes the news clip plays fine but once it's over the audio is fine but the video screen is black. No websites showed up. What can I do?
This is a bug in the code running on the news site. The content provider will need to fix this on their end.
Thanks! -
I'm the unhappy owner of a MuVo^2. My player is jamed. When turn on my player it goes right to the Recovery Mode. When I try to re-boot, reload firmware, format all etc. I get a Media error message. I have also tried to take out the battery - press the menu button and at the same time plug in the power supply.... still Media error. I can't connect it to my PC either. What can I do to this solved?
Uwe (Denmark)See this thread for a reply by a Mod on a similar problem:
http://forums.creative.com/creativel...query.id=82520
PB -
Hello:
I've tried unsuccessfully to burn a dvd, twice now, and I get this message (after taking a long time to process)
Media error: WRITE error - RECOVERY FAILED (0x0C0x08). The disc appeared to have burned and it played to a certain point then froze. Anyone have any idea what this means? Thanks in advance!
BethYou could try formating to the hard drive instead of DVD burner which will make a .img file. You can then burn the .img file with Disk Utility and reduce the burn speed using the popup menu. Reducing the burn speed often fixes problems with certain media.
-
Toshiba 32AV933G: unsupported media error caused by subtitles
Hello.
I am having some trouble with this media player of my toshiba bedroom tv.
More specific sometimes while the media plays at some time the audio stops, after a few seconds the tv becomes unresponsive while playing only the video and finally it gets me back to the video folder with an `unsupported media`error.
After a lot of troubleshooting _i finally came to the solution._
_The problem is caused by the subtitles._
I am in greece so for sure this happens with greek subs.
If for example the subs have a line and the line starts with( ( i ) * that is bold subtitle) this problem will occur.
If i remove the bold from the subs there is no problem at all.
Obviously bold etc is not supported.
I think this could be easilly fixed via a firmware upgrade.
*i have put ( i ) which is not the correct form because the correct one that starts and ends with < is not shown in the message:)Yes of course. Without utf-8 the srt doesnt work at all with greek language.
However the problem remains.
As i said tried a lot of things. First of all i thought it was the video encode etc.
*Finally i came to the solution.*
If in the text file of the subs(srt) there are special tags in the beginning of the line like the ones i wrote before the video doesnt work ok.
If i delete this special tags using a text editor it is working ok.
Surely there is a problem with <i)> tag that is i think for potitioning the subs.
Of course i can spent one minute to fix every sub file, it is not difficult.
But i dont think its a problem that cant be solved easily with a firmware upgrade..
Ps after further testing the <i)> flag in front of a line and </i)> in the end makes the player to stop playing the video. The bold flags <b)> and </b)> dont make the video to halt.
However the subs dont display correct for about one minute after the bolded sub.
If they could just make a firmware that completely ignores these flags i think it would solve the problem.. -
Urgent plz help me.error fixing--full marks given
Hi..this is regarding error fixing for prgm below in ecc 6.0
*& Report ZCLEAREM
REPORT ZCLEAREM.
TABLES: LFA1, LFB1, BSIK.
PARAMETERS: CLRDATE LIKE BSIK-AUGDT.
SELECT-OPTIONS: ALLOCATE FOR BSIK-ZUONR,
CLIENT FOR BSIK-MANDT.
DATA: BEGIN OF CLEARING OCCURS 3000,
LIFNR LIKE BSIK-LIFNR,
BUKRS LIKE BSIK-BUKRS,
BUDAT LIKE BSIK-BUDAT,
ZUONR LIKE BSIK-ZUONR.
DATA: END OF CLEARING.
DATA: SESSION(12) VALUE 'CLEARVENDORS'.
DATA: BEGIN OF BDC_TAB OCCURS 10.
INCLUDE STRUCTURE BDCDATA.
DATA: END OF BDC_TAB.
DATA: FROM_DATE(10), TO_DATE(10), COMPANY_CODE LIKE KOST1-BUKRS.
DATA: CTR(4) TYPE N VALUE 0, HOLD_LIFNR LIKE BSIK-LIFNR.
DATA: HOLD_BUKRS LIKE BSIK-BUKRS.
CALL FUNCTION 'BDC_OPEN_GROUP'
EXPORTING
CLIENT = SY-MANDT
GROUP = SESSION
HOLDDATE = '07/01/96'
USER = SY-UNAME
KEEP = 'X'.
CONCATENATE: CLRDATE4(2) '/' CLRDATE6(2) '/'
CLRDATE+0(4) INTO FROM_DATE.
WRITE : / 'CLEARING DATE USED IS ', CLRDATE.
START-OF-SELECTION.
GET BSIK LATE.
CHECK CLIENT.
CHECK ALLOCATE.
IF ( BSIK-QSSHB GT 0 ) AND ( BSIK-AUGBL EQ ' ' ).
MOVE-CORRESPONDING BSIK TO CLEARING.
APPEND CLEARING.
ENDIF.
END-OF-SELECTION.
WRITE : / 'SELECTED ', CTR, ' RECORDS FOR CLEARING...'.
SORT CLEARING BY LIFNR BUKRS BUDAT.
DELETE ADJACENT DUPLICATES FROM CLEARING COMPARING LIFNR BUKRS.
LOOP AT CLEARING.
WRITE : / CLEARING-LIFNR, ' ', CLEARING-BUKRS, ' CLEARED. '.
PERFORM GENERATE_BDC_DATA.
CTR = CTR + 1.
CALL FUNCTION 'BDC_INSERT'
EXPORTING
TCODE = 'F-44'
TABLES
DYNPROTAB = BDC_TAB.
ENDLOOP.
CALL FUNCTION 'BDC_CLOSE_GROUP'.
WRITE: /'end of generation of bdc session - ', SESSION, SY-MANDT,
SY-UNAME, SY-UZEIT.
WRITE: / 'WILL CLEAR A TOTAL OF ', CTR, ' RECORDS.'.
FORM GENERATE_BDC_DATA *
FORM GENERATE_BDC_DATA.
REFRESH BDC_TAB.
PERFORM DYNPRO USING:
'X' 'SAPMF05A' '0131',
'' 'RF05A-AGKON' CLEARING-LIFNR,
'' 'BKPF-BUKRS' CLEARING-BUKRS,
'' 'BKPF-BUDAT' FROM_DATE,
'' 'RF05A-XPOS1(2)' 'X',
'' 'BDC_OKCODE' '/16',
'X' 'SAPMF05A' '0731',
'' 'RF05A-SEL01(1)' CLEARING-ZUONR,
'' 'BDC_OKCODE' '/16',
LOOP AT
'X' 'SAPDF05X' '1102',
'' 'BDC_OKCODE' 'BU'.
ENDFORM.
FORM DYNPRO *
--> DYNBEGIN *
--> NAME *
--> VALUE *
FORM DYNPRO USING DYNBEGIN NAME VALUE.
IF DYNBEGIN = 'X'.
CLEAR BDC_TAB.
MOVE: NAME TO BDC_TAB-PROGRAM,
VALUE TO BDC_TAB-DYNPRO,
'X' TO BDC_TAB-DYNBEGIN.
APPEND BDC_TAB.
ELSE.
CLEAR BDC_TAB.
MOVE: NAME TO BDC_TAB-FNAM,
VALUE TO BDC_TAB-FVAL.
APPEND BDC_TAB.
ENDIF.
ENDFORM.In abap editor menu path
Goto-->Attributes
here in Logical Database name define KDF.
It will work.
regards
shiba dutta -
Hi all..very urgent..error fixing..full marks wud be given for the answers.
Hi guys..facing problem in error fixing.in bdc...prgm is in ECC 6.0..
prgm is
*& Report ZCJI_CNV_POSTGOODSRECEIPT_ALT1
REPORT ZCJI_CNV_POSTGOODSRECEIPT_ALT1.
*REPORT ZCJI_CNV_POSTGOODSRECEIPT_ALT NO STANDARD PAGE HEADING
LINE-SIZE 255.
*Program: ZCJI_CNV_POSTGOODSRECEIPT_ALT *
*Function: This program is used to carry out GR transaction MB0A for
CJI import logistics purchase orders. The objective is to
choose only those purchase orders for which billing has been
carried out already. Once GR document is posted, the status
of delivery document items is also updated.
DATE AUTHOR SCR # CHANGE DESCRIPTION
11/04/03 Ohm Reddy BRD # 90 Initial version
DEVK928402
02/25/04 Ohm Reddy In BDC session for posting Goods
DEVK929329 Receipt document, update document
date with system local date
(SYST-DATLO) rather than with
system date(SYST-DATUM)
06/23/04 Ohm Reddy Post GR only when sales order
DEVK931359 item SKU and PO item SKU matches
03/21/05 Alex Mutia 13829/DEVK934135 *
Phase II modifications: *
1. Added criteria in the selection screen; *
2. Modified record selection logic; *
3. Added fields in the Control Report; *
04/08/05 Alex Mutia 13829/DEVK934262 *
Fixed bug in processing MFRGR field; *
04/13/05 Alex Mutia 13829/DEVK934283 *
1.Fixed bug in assigning error record pointers*
to part-success part-error POs; *
2.Added SO and SO line item numbers in report;*
3.Compressed report to fit in 255 columns; *
04/27/05 Alex Mutia 13829/DEVK934384 *
1.Material documents retrieval changed from *
MSEG to EKBE for performance. *
2.Display empty ALV columns when no records *
were selected for processing; *
TYPE-POOLS: SLIS.
DATA: GT_FIELDCAT TYPE SLIS_T_FIELDCAT_ALV.
DATA: G_LAYOUT_ALV_SPEC TYPE SLIS_LAYOUT_ALV.
*INCLUDE ZMMCJI_CNV_POSTGR_BDC2.
INCLUDE ZCJI_CNV_PGR_DATA_ALT.
$--"DEVK934135 Begin;-$
INITIALIZATION. "DEVK934135
PERFORM INITIALIZE_VENDOR. "DEVK934135
PERFORM INITIALIZE_PRICE. "DEVK934135
$--"DEVK934135 End;---$
START-OF-SELECTION.
IF P_LIFNR IS INITIAL. "DEVK934135
PERFORM INITIALIZE_VENDOR. "DEVK934135
ENDIF. "DEVK934135
IF P_NETPR IS INITIAL. "DEVK934135
PERFORM INITIALIZE_PRICE. "DEVK934135
ENDIF. "DEVK934135
PERFORM 100_SELECT_DATA.
END-OF-SELECTION.
CHECK: g_return_code IS INITIAL. "DEVK934384
IF NOT itab[] IS INITIAL. "DEVK934384
IF G_RETURN_CODE IS INITIAL AND "DEVK934384
NOT ITAB[] IS INITIAL. "DEVK934384
PERFORM 200_PROCESS_DATA.
PERFORM 300_POST_DOCUMENTS.
PERFORM 399_RETRIEVE_DOCUMENTS.
PERFORM REORG_ITAB.
PERFORM BUILD_HEADER_CATALOG.
PERFORM FIELDCAT_INIT USING GT_FIELDCAT[].
SY_COPY = SYST.
PERFORM SHOW_TRANSACTION_ERRORS.
ELSE. "DEVK934384
PERFORM SHOW_EMPTY_LIST. "DEVK934384
ENDIF.
*& Form SELECT_DATA
FORM 100_SELECT_DATA.
PERFORM 110_SELECT_OPEN_PO_QTY.
CHECK: G_RETURN_CODE IS INITIAL.
PERFORM 120_SELECT_PO_BILLED_QTY.
ENDFORM. " 100_SELECT_DATA
*& Form 110_SELECT_OPEN_PO_QTY
FORM 110_SELECT_OPEN_PO_QTY.
$--"DEVK934135 Begin;-$
SELECT T1~VGBEL
T1~VGPOS
T1~VBELN
T1~POSNR
T1~MATNR
T1~LFIMG
T1~MFRGR
T2~LIFEX
T2~LFDAT
FROM LIPS AS T1
INNER JOIN LIKP AS T2
ON T1MANDT EQ T2MANDT AND
T1VBELN EQ T2VBELN
APPENDING CORRESPONDING FIELDS OF TABLE ITAB_LIPS
WHERE T1~MANDT EQ SY-MANDT "client is system client
AND T1~VBELN IN S_VBELN "billing doc in criteria
AND T1~VGBEL IN S_EBELN "po reference in criteria
AND T1~PSTYV EQ 'ELN' "billing item category
AND T1~WERKS EQ 'JDC1' "plant
AND T1~MFRGR NE 'C' "material freight group
AND T2~LIFNR EQ P_LIFNR. "vendor is param vendor
LOOP AT ITAB_LIPS.
ITAB_LIPS-EBELN = ITAB_LIPS-VGBEL.
ITAB_LIPS-EBELP = ITAB_LIPS-VGPOS.
ITAB_LIPS-CHARG = ITAB_LIPS-LIFEX.
ITAB_LIPS-OLDMFRGR
= ITAB_LIPS-MFRGR.
MODIFY ITAB_LIPS.
ENDLOOP.
IF ITAB_LIPS[] IS INITIAL.
MESSAGE i032(zm) WITH text-m11. "DEVK934384
G_RETURN_CODE = 'X'.
EXIT.
ENDIF.
SELECT T1~EBELN
T1~EBELP
T1~LICHA
T2~MATNR
T2~MENGE
T2~LOEKZ
T2~ELIKZ
T2~NETPR
T3~IHREZ
FROM EKET AS T1
INNER JOIN EKPO AS T2
ON T1MANDT EQ T2MANDT AND
T1EBELN EQ T2EBELN AND
T1EBELP EQ T2EBELP
INNER JOIN EKKO AS T3
ON T1MANDT EQ T3MANDT AND
T1EBELN EQ T3EBELN
APPENDING CORRESPONDING FIELDS OF TABLE ITAB
FOR ALL ENTRIES IN ITAB_LIPS
WHERE T1~MANDT EQ SY-MANDT "client is system client
AND T1~EBELN EQ ITAB_LIPS-EBELN "po# matches w/ billing
AND T3~BSART IN ('YT', 'YN'). "po type
IF ITAB[] IS INITIAL.
MESSAGE i032(zm) WITH text-m11. "DEVK934384
G_RETURN_CODE = 'X'.
EXIT.
ENDIF.
$--"DEVK934135 End;---$
delete any duplicate entries in itab table
SORT ITAB BY EBELN EBELP.
DELETE ADJACENT DUPLICATES FROM ITAB COMPARING EBELN EBELP.
LOOP AT ITAB.
ITAB-RECID = SY-TABIX.
IF NOT ITAB-IHREZ IS INITIAL.
WHILE ITAB-IHREZ+0(1) EQ ' '.
SHIFT ITAB-IHREZ.
ENDWHILE.
WHILE ITAB-IHREZ+9(1) EQ ' '.
SHIFT ITAB-IHREZ RIGHT.
ITAB-IHREZ+0(1) = '0'.
ENDWHILE.
ENDIF.
MODIFY ITAB.
ENDLOOP.
delete ITAB_LIPS entries that are not there in ITAB
LOOP AT ITAB_LIPS.
SY_COPY-TABIX = SY-TABIX.
CLEAR ITAB.
READ TABLE ITAB WITH KEY EBELN = ITAB_LIPS-EBELN
EBELP = ITAB_LIPS-EBELP BINARY SEARCH.
SY_COPY-INDEX = SY-TABIX.
IF SY-SUBRC NE 0.
DELETE ITAB_LIPS.
ELSE.
ITAB_LIPS-IHREZ = ITAB-IHREZ.
MODIFY ITAB_LIPS INDEX SY_COPY-TABIX.
ITAB-MFRGR = ITAB_LIPS-MFRGR.
ITAB-LIFEX = ITAB_LIPS-LIFEX.
ITAB-OLDMFRGR
= ITAB_LIPS-OLDMFRGR.
MODIFY ITAB INDEX SY_COPY-INDEX.
ENDIF.
ENDLOOP.
select the goods receipts documents created for the above deliveries
SELECT EBELN EBELP BELNR GJAHR
INTO TABLE ITAB_EKBE FROM EKBE
FOR ALL ENTRIES IN ITAB_LIPS
WHERE EBELN = ITAB_LIPS-EBELN
AND EBELP = ITAB_LIPS-EBELP.
select Goods receipt data from MSEG table for the above deliveries
IF NOT ITAB_EKBE[] IS INITIAL.
SELECT EBELN EBELP CHARG BWART MENGE MBLNR MJAHR ZEILE
INTO TABLE ITAB_MSEG FROM MSEG
FOR ALL ENTRIES IN ITAB_EKBE
WHERE MBLNR = ITAB_EKBE-BELNR
AND MJAHR = ITAB_EKBE-GJAHR.
ENDIF.
SORT ITAB_MSEG BY EBELN EBELP CHARG.
calculate the GR qty eligible to be posted
SORT ITAB_LIPS BY EBELN EBELP.
LOOP AT ITAB_LIPS.
ITAB_LIPS-POSTQTY = ITAB_LIPS-LFIMG.
CLEAR ITAB_MSEG.
LOOP AT ITAB_MSEG WHERE EBELN = ITAB_LIPS-EBELN
AND EBELP = ITAB_LIPS-EBELP
AND CHARG = ITAB_LIPS-CHARG.
IF ITAB_MSEG-BWART = '101'.
ITAB_LIPS-POSTQTY = ITAB_LIPS-POSTQTY - ITAB_MSEG-MENGE.
ELSEIF ITAB_MSEG-BWART = '102'.
ITAB_LIPS-POSTQTY = ITAB_LIPS-POSTQTY + ITAB_MSEG-MENGE.
ENDIF.
ENDLOOP.
MODIFY ITAB_LIPS.
CLEAR ITAB_LIPS.
ENDLOOP.
LOOP AT ITAB.
ITAB-RECID = SY-TABIX.
MODIFY ITAB.
LOOP AT ITAB_LIPS WHERE EBELN EQ ITAB-EBELN
AND EBELP EQ ITAB-EBELP.
ITAB_LIPS-RECID = ITAB-RECID.
MODIFY ITAB_LIPS.
ENDLOOP.
ENDLOOP.
free the memory of unnecessary internal tables
$--"DEVK934135 Begin;-$
CLEAR: ITAB_EKBE.
FREE: ITAB_EKBE.
$--"DEVK934135 End;---$
ENDFORM. " 110_SELECT_OPEN_PO_QTY
*& Form 120_SELECT_PO_BILLED_QTY
FORM 120_SELECT_PO_BILLED_QTY.
$--"DEVK934135 Begin;-$
SELECT T1~VBELN
T1~POSNR
T1~FKIMG
T1~AUBEL
T1~AUPOS
APPENDING CORRESPONDING FIELDS OF TABLE ITAB_VBRP
FROM VBRP AS T1
INNER JOIN VBRK AS T2
ON T1MANDT EQ T2MANDT AND
T1VBELN EQ T2VBELN
FOR ALL ENTRIES IN ITAB
WHERE T1~MANDT EQ SY-MANDT "client is system client
AND T1~VBELN EQ ITAB-IHREZ+0(10) "billing doc = your ref.
AND T2~FKSTO EQ ' '. "status NOT cancelled
Match ITAB-IHREZ <-> ITAB_VBRP-VBELN...
ITAB-LICHA <-> ITAB_VBRP-POSNR...
LOOP AT ITAB.
SY_COPY-TABIX = SY-TABIX.
Check your reference (IHREZ) field;
IF ITAB-IHREZ IS INITIAL. "your-ref blank
ITAB-ERRFA = 'X'.
GT_ERROR-RECID = ITAB-RECID.
GT_ERROR-ERRTX = TEXT-E0A.
APPEND GT_ERROR.
ELSE. "your-ref NOT blank
IF ITAB-IHREZ CO ' 0123456789'. "your-ref numeric
ENDIF. "your-ref numeric
IF SY-FDPOS NE 12. "your-ref NOT numeric
ITAB-ERRFA = 'X'.
GT_ERROR-RECID = ITAB-RECID.
GT_ERROR-ERRTX = TEXT-E0A.
APPEND GT_ERROR.
ELSE. "your-ref NOT numeric
Check PO line item (LICHA) field;
IF ITAB-LICHA IS INITIAL. "line item blank
ITAB-ERRFA = 'X'.
GT_ERROR-RECID = ITAB-RECID.
GT_ERROR-ERRTX = TEXT-E01.
APPEND GT_ERROR.
ELSE. "line item NOT blank
IF ITAB-LICHA CO ' 0123456789'. "line item numeric
ENDIF. "line item numeric
IF SY-FDPOS NE 15. "line item NOT numeric
ITAB-ERRFA = 'X'.
GT_ERROR-RECID = ITAB-RECID.
GT_ERROR-ERRTX = TEXT-E01.
APPEND GT_ERROR.
ELSE. "line item NOT numeric
SY_COPY-SUBRC = 4.
READ TABLE ITAB_VBRP
WITH KEY VBELN = ITAB-IHREZ+0(10)
POSNR = ITAB-LICHA+0(6) BINARY SEARCH.
SY_COPY-SUBRC = SY-SUBRC.
IF SY_COPY-SUBRC NE 0.
ITAB-ERRFA = 'X'.
GT_ERROR-RECID = ITAB-RECID.
GT_ERROR-ERRTX = TEXT-E01.
APPEND GT_ERROR.
ELSE. "DEVK934283
ITAB-AUBEL = ITAB_VBRP-AUBEL. "DEVK934283
ITAB-AUPOS = ITAB_VBRP-AUPOS. "DEVK934283
ENDIF.
ENDIF. "line item NOT numeric
ENDIF. "line item blank
ENDIF. "your-ref NOT numeric
ENDIF. "your-ref blank
Check ID - LIFEX;
IF ITAB-LIFEX EQ ' '. "LIFEX is blank
ITAB-ERRFB = 'X'.
GT_ERROR-RECID = ITAB-RECID.
GT_ERROR-ERRTX = TEXT-ERB.
APPEND GT_ERROR.
ELSE. "LIFEX is NOT blank
Check ID - MFRGR;
IF ITAB-MFRGR NE 'G'. "MFRGR NOT G
ITAB-ERRFC = 'X'.
GT_ERROR-RECID = ITAB-RECID.
GT_ERROR-ERRTX = TEXT-ERC.
APPEND GT_ERROR.
ENDIF. "MFRGR NOT G
ENDIF. "LIFEX is blank
Check PO - Deletion indicator;
IF ITAB-LOEKZ NE ' '. "LOEKZ NOT blank
ITAB-ERRFD = 'X'.
GT_ERROR-RECID = ITAB-RECID.
GT_ERROR-ERRTX = TEXT-ERD.
APPEND GT_ERROR.
ENDIF. "LOEKZ NOT blank
Check PO - Delivery completed flag;
IF ITAB-ELIKZ NE ' '. "ELIKZ NOT blank
ITAB-ERRFE = 'X'.
GT_ERROR-RECID = ITAB-RECID.
GT_ERROR-ERRTX = TEXT-ERE.
APPEND GT_ERROR.
ENDIF. "ELIKZ NOT blank
Check PO - Net price;
IF ITAB-NETPR LT P_NETPR. "price < parameter
ITAB-ERRFF = 'X'.
GT_ERROR-RECID = ITAB-RECID.
CONCATENATE TEXT-ERF
G_NETPR
TEXT-USD
INTO GT_ERROR-ERRTX SEPARATED BY SPACE.
APPEND GT_ERROR.
ENDIF. "ELIKZ NOT blank
IF ITAB-AUPOS EQ '000000'.
CLEAR: ITAB-AUPOS.
ENDIF.
MODIFY ITAB INDEX SY_COPY-TABIX.
ENDLOOP.
LOOP AT ITAB. "DEVK934283
READ TABLE ITAB_LIPS "DEVK934283
WITH KEY VGBEL = ITAB-EBELN "DEVK934283
VGPOS = ITAB-EBELP "DEVK934283
BINARY SEARCH. "DEVK934283
SY_COPY-TABIX = SY-TABIX. "DEVK934283
IF SY-SUBRC EQ 0. "DEVK934283
ITAB_LIPS-AUBEL = ITAB-AUBEL. "DEVK934283
ITAB_LIPS-AUPOS = ITAB-AUPOS. "DEVK934283
MODIFY ITAB_LIPS INDEX SY_COPY-TABIX. "DEVK934283
ENDIF. "DEVK934283
ENDLOOP. "DEVK934283
Transfer errors from ITAB to ITAB_LIPS;
LOOP AT ITAB WHERE ERRFA EQ 'X'
OR ERRFB EQ 'X'
OR ERRFC EQ 'X'
OR ERRFD EQ 'X'
OR ERRFE EQ 'X'
OR ERRFF EQ 'X'.
READ TABLE ITAB_LIPS
WITH KEY VGBEL = ITAB-EBELN
VGPOS = ITAB-EBELP BINARY SEARCH.
SY_COPY-TABIX = SY-TABIX.
IF SY-SUBRC EQ 0.
ITAB_LIPS-ERRFA = ITAB-ERRFA.
ITAB_LIPS-ERRFB = ITAB-ERRFB.
ITAB_LIPS-ERRFC = ITAB-ERRFC.
ITAB_LIPS-ERRFD = ITAB-ERRFD.
ITAB_LIPS-ERRFE = ITAB-ERRFE.
ITAB_LIPS-ERRFF = ITAB-ERRFF.
ITAB_LIPS-NEWMFRGR = 'E'.
MODIFY ITAB_LIPS INDEX SY_COPY-TABIX.
ENDIF.
ENDLOOP.
$--"DEVK934135 End;---$
ENDFORM. " 120_SELECT_PO_BILLED_QTY
*& Form 200_PROCESS_DATA
FORM 200_PROCESS_DATA.
PERFORM 210_CONSOLIDATE_DATA.
PERFORM 220_PROCESS_DATA.
ENDFORM. " 200_PROCESS_DATA
*& Form 210_consolidate_data
FORM 210_CONSOLIDATE_DATA.
Get the PO item open qty and billed qty into one table
LOOP AT ITAB.
CLEAR ITAB_LIPS.
LOOP AT ITAB_LIPS WHERE EBELN = ITAB-EBELN
AND EBELP = ITAB-EBELP.
ITAB-IDQTY = ITAB-IDQTY + ITAB_LIPS-POSTQTY. "inbound delv qty
ENDLOOP.
CLEAR ITAB_VBRP.
LOOP AT ITAB_VBRP WHERE VBELN = ITAB-IHREZ
AND POSNR = ITAB-LICHA.
ITAB-FKIMG = ITAB-FKIMG + ITAB_VBRP-FKIMG. "PO item billed qty
ENDLOOP.
CLEAR ITAB_MSEG.
LOOP AT ITAB_MSEG WHERE EBELN = ITAB-EBELN
AND EBELP = ITAB-EBELP.
IF ITAB_MSEG-BWART = '101'.
ITAB-GRQTY = ITAB-GRQTY + ITAB_MSEG-MENGE. "PO item GR qty
ELSEIF ITAB_MSEG-BWART = '102'.
ITAB-GRQTY = ITAB-GRQTY - ITAB_MSEG-MENGE. "PO item GR qty
ELSEIF ITAB_MSEG-BWART = '122'. "DEVK934135
ITAB-GRQTY = ITAB-GRQTY - ITAB_MSEG-MENGE. "PO item GR qty
ENDIF.
ENDLOOP.
ITAB-RCVQTY = ITAB-FKIMG - ITAB-GRQTY. "qty billed but not received
calculate the quantity to be processed for which GRs are to be posted
IF ITAB-RCVQTY > 0 AND ITAB-RCVQTY > ITAB-IDQTY.
ITAB-PROCQTY = ITAB-IDQTY.
ELSEIF ITAB-RCVQTY > 0 AND ITAB-RCVQTY < ITAB-IDQTY.
ITAB-PROCQTY = ITAB-RCVQTY.
ELSEIF ITAB-RCVQTY > 0 AND ITAB-RCVQTY = ITAB-IDQTY.
ITAB-PROCQTY = ITAB-IDQTY.
ENDIF.
MODIFY ITAB.
CLEAR ITAB.
ENDLOOP.
free the memory of unnecessary internal tables
$--"DEVK934135 Begin;-$
CLEAR: ITAB_MSEG.
FREE: ITAB_MSEG.
$--"DEVK934135 End;---$
ENDFORM. " 210_consolidate_data
*& Form 220_PROCESS_DATA
FORM 220_PROCESS_DATA.
DATA: L0_FISCAL_PERIOD LIKE BAPI0002_4-FISCAL_PERIOD,
L0_FISCAL_YEAR LIKE BAPI0002_4-FISCAL_YEAR,
L0_RETURN LIKE BAPIRETURN1,
L1_FISCAL_PERIOD LIKE BAPI0002_4-FISCAL_PERIOD,
L1_FISCAL_YEAR LIKE BAPI0002_4-FISCAL_YEAR,
L1_RETURN LIKE BAPIRETURN1.
SORT ITAB_LIPS BY VGBEL VGPOS EBELN EBELP
LFDAT DESCENDING POSNR ASCENDING.
SORT ITAB BY EBELN EBELP.
Calculate the GR quanities to be posted for all inbound deliveries
LOOP AT ITAB_LIPS.
AT NEW EBELP.
CLEAR ITAB.
CLEAR V_RCVQTY.
READ TABLE ITAB WITH KEY EBELN = ITAB_LIPS-EBELN
EBELP = ITAB_LIPS-EBELP BINARY SEARCH.
V_RCVQTY = ITAB-RCVQTY.
ENDAT.
IF ITAB-PROCQTY GT 0.
IF ITAB_LIPS-POSTQTY GT ITAB-PROCQTY.
ITAB_LIPS-PROCQTY = ITAB-PROCQTY.
ITAB_LIPS-NEWMFRGR = 'B'.
ITAB-PROCQTY = 0.
ELSEIF ITAB_LIPS-POSTQTY LT ITAB-PROCQTY.
ITAB_LIPS-PROCQTY = ITAB_LIPS-POSTQTY.
ITAB_LIPS-NEWMFRGR = 'C'.
ITAB-PROCQTY = ITAB-PROCQTY - ITAB_LIPS-POSTQTY.
ELSEIF ITAB_LIPS-POSTQTY EQ ITAB-PROCQTY.
ITAB_LIPS-PROCQTY = ITAB_LIPS-POSTQTY.
ITAB_LIPS-NEWMFRGR = 'C'.
ITAB-PROCQTY = 0.
ENDIF.
Compare the Inbound delivery processing quantity with the pending
billing quantity to write it in the report log
IF ITAB_LIPS-POSTQTY LT V_RCVQTY.
ITAB_LIPS-GRIND = 'D'. "GR will be created for ID qty
V_RCVQTY = V_RCVQTY - ITAB_LIPS-POSTQTY.
ELSEIF ITAB_LIPS-POSTQTY GT V_RCVQTY.
ITAB_LIPS-GRIND = 'B'. "GR will be created for Billied qty
V_RCVQTY = 0.
ELSEIF ITAB_LIPS-POSTQTY EQ V_RCVQTY.
ITAB_LIPS-GRIND = 'S'. "Billed qty is equal to ID qty
V_RCVQTY = 0.
ENDIF.
ELSE.
Decide why this inbound delivery could not have GR quantity -
excess GR quantity or unavailable Billing quantity
IF ITAB-RCVQTY LT ITAB-IDQTY.
ITAB_LIPS-GRIND = 'C'. "GR not created - Lack of Billed qty
ENDIF.
IF ITAB-RCVQTY LT 0.
ITAB_LIPS-GRIND = 'A'. "GR not created - GR qty > Bill qty
ENDIF.
ENDIF.
MODIFY ITAB_LIPS.
CLEAR ITAB_LIPS.
ENDLOOP.
$--"DEVK934135-Begin;-$
LOOP AT ITAB_LIPS.
AT NEW EBELP.
CLEAR ITAB.
CLEAR V_RCVQTY.
READ TABLE ITAB WITH KEY EBELN = ITAB_LIPS-EBELN
EBELP = ITAB_LIPS-EBELP BINARY SEARCH.
V_RCVQTY = ITAB-FKIMG - ITAB-GRQTY.
ENDAT.
IF ITAB_LIPS-ERRFA IS INITIAL.
IF V_RCVQTY EQ 0.
ITAB_LIPS-ERRF1 = 'X'.
ITAB_LIPS-NEWMFRGR = 'E'.
GT_ERROR-RECID = ITAB-RECID.
GT_ERROR-ERRTX = TEXT-R01.
APPEND GT_ERROR.
ELSEIF V_RCVQTY LT 0.
ITAB_LIPS-ERRF2 = 'X'.
ITAB_LIPS-NEWMFRGR = 'E'.
GT_ERROR-RECID = ITAB-RECID.
GT_ERROR-ERRTX = TEXT-R02.
APPEND GT_ERROR.
ELSEIF V_RCVQTY GT 0.
IF V_RCVQTY EQ ITAB_LIPS-LFIMG.
ITAB_LIPS-ERRF3 = 'X'.
ITAB_LIPS-NEWMFRGR = 'C'.
ELSEIF V_RCVQTY GT ITAB_LIPS-LFIMG.
ITAB_LIPS-ERRF4 = 'X'.
ITAB_LIPS-NEWMFRGR = 'C'.
ITAB_LIPS-PROCQTY = ITAB_LIPS-LFIMG.
GT_ERROR-RECID = ITAB-RECID.
GT_ERROR-ERRTX = TEXT-R04.
APPEND GT_ERROR.
ELSEIF V_RCVQTY LT ITAB_LIPS-LFIMG.
ITAB_LIPS-ERRF5 = 'X'.
ITAB_LIPS-NEWMFRGR = 'E'.
GT_ERROR-RECID = ITAB-RECID.
GT_ERROR-ERRTX = TEXT-R05.
APPEND GT_ERROR.
ENDIF.
ENDIF.
ENDIF.
CLEAR: ITAB_LIPS-BLDAT.
READ TABLE ITAB WITH KEY EBELN = ITAB_LIPS-VGBEL
EBELP = ITAB_LIPS-VGPOS BINARY SEARCH.
SELECT SINGLE FKDAT
FROM VBRK
INTO (ITAB_LIPS-BLDAT)
WHERE VBELN EQ ITAB-IHREZ+0(10).
CALL FUNCTION 'BAPI_COMPANYCODE_GET_PERIOD'
EXPORTING
COMPANYCODEID = 'C800'
POSTING_DATE = ITAB_LIPS-BLDAT
IMPORTING
FISCAL_YEAR = L0_FISCAL_YEAR
FISCAL_PERIOD = L0_FISCAL_PERIOD
RETURN = L0_RETURN.
CALL FUNCTION 'BAPI_COMPANYCODE_GET_PERIOD'
EXPORTING
COMPANYCODEID = 'C800'
POSTING_DATE = SY-DATLO
IMPORTING
FISCAL_YEAR = L1_FISCAL_YEAR
FISCAL_PERIOD = L1_FISCAL_PERIOD
RETURN = L1_RETURN.
IF L0_FISCAL_YEAR EQ L1_FISCAL_YEAR AND
L0_FISCAL_PERIOD EQ L1_FISCAL_PERIOD.
ITAB_LIPS-BUDAT = ITAB_LIPS-BLDAT.
ELSE.
ITAB_LIPS-BUDAT = SY-DATLO.
ENDIF.
MODIFY ITAB_LIPS.
CLEAR ITAB_LIPS.
ENDLOOP.
$--"DEVK934135-End;---$
collect all the inbound deliveries for which goods receipt are to be
made / material freight status are to be updated
LOOP AT ITAB_LIPS WHERE ERRFA IS INITIAL "DEVK934135
AND ERRFB IS INITIAL "DEVK934135
AND ERRFC IS INITIAL "DEVK934135
AND ERRFD IS INITIAL "DEVK934135
AND ERRFE IS INITIAL "DEVK934135
AND ERRFF IS INITIAL "DEVK934135
AND ERRF1 IS INITIAL "DEVK934135
AND ERRF2 IS INITIAL "DEVK934135
AND ERRF5 IS INITIAL. "DEVK934135
IF ITAB_LIPS-PROCQTY GT 0 AND ITAB_LIPS-LFIMG NE 0.
ITAB_LIPS_G-VBELN = ITAB_LIPS-VBELN.
ITAB_LIPS_G-BLDAT = ITAB_LIPS-BLDAT. "DEVK934135
ITAB_LIPS_G-BUDAT = ITAB_LIPS-BUDAT. "DEVK934135
ITAB_LIPS_G-IHREZ = ITAB_LIPS-IHREZ. "DEVK934135
APPEND ITAB_LIPS_G.
ENDIF.
ENDLOOP.
SORT ITAB_LIPS_G BY VBELN.
DELETE ADJACENT DUPLICATES FROM ITAB_LIPS_G.
LOOP AT ITAB_LIPS WHERE NOT ERRFA IS INITIAL "DEVK934135
OR NOT ERRFB IS INITIAL "DEVK934135
OR NOT ERRFC IS INITIAL "DEVK934135
OR NOT ERRFD IS INITIAL "DEVK934135
OR NOT ERRFE IS INITIAL "DEVK934135
OR NOT ERRFF IS INITIAL "DEVK934135
OR NOT ERRF1 IS INITIAL "DEVK934135
OR NOT ERRF2 IS INITIAL "DEVK934135
OR NOT ERRF3 IS INITIAL "DEVK934135
OR NOT ERRF4 IS INITIAL "DEVK934135
OR NOT ERRF5 IS INITIAL. "DEVK934135
ITAB_LIPS_X-VBELN = ITAB_LIPS-VBELN.
ITAB_LIPS_X-BLDAT = ITAB_LIPS-BLDAT. "DEVK934135
ITAB_LIPS_X-BUDAT = ITAB_LIPS-BUDAT. "DEVK934135
ITAB_LIPS_X-IHREZ = ITAB_LIPS-IHREZ. "DEVK934135
APPEND ITAB_LIPS_X.
ENDLOOP.
SORT ITAB_LIPS_X BY VBELN.
DELETE ADJACENT DUPLICATES FROM ITAB_LIPS_X.
LOOP AT ITAB_LIPS.
READ TABLE ITAB WITH KEY RECID = ITAB_LIPS-RECID.
SY_COPY-INDEX = SY-TABIX.
IF SY-SUBRC EQ 0.
ITAB-ERRFA = ITAB_LIPS-ERRFA.
ITAB-ERRFB = ITAB_LIPS-ERRFB.
ITAB-ERRFC = ITAB_LIPS-ERRFC.
ITAB-ERRFD = ITAB_LIPS-ERRFD.
ITAB-ERRFE = ITAB_LIPS-ERRFE.
ITAB-ERRFF = ITAB_LIPS-ERRFF.
ITAB-ERRF1 = ITAB_LIPS-ERRF1.
ITAB-ERRF2 = ITAB_LIPS-ERRF2.
ITAB-ERRF3 = ITAB_LIPS-ERRF3.
ITAB-ERRF4 = ITAB_LIPS-ERRF4.
ITAB-ERRF5 = ITAB_LIPS-ERRF5.
MODIFY ITAB INDEX SY_COPY-INDEX.
ENDIF.
ENDLOOP.
Decide the goods receipt item number for the delivery items that are
to be processed. Delivery items with zero quantities are not shown up
in MB0A transaction for GR
CLEAR V_DEL_ZERO.
IF NOT ITAB_LIPS_G[] IS INITIAL.
SELECT VBELN POSNR LFIMG
INTO CORRESPONDING FIELDS OF TABLE ITAB_LIPS_Z FROM LIPS
FOR ALL ENTRIES IN ITAB_LIPS_G
WHERE VBELN = ITAB_LIPS_G-VBELN
AND LFIMG EQ 0.
IF SY-SUBRC EQ 0.
V_DEL_ZERO = 'X'.
CLEAR ITAB_LIPS_Z.
FREE ITAB_LIPS_Z.
SELECT VBELN POSNR LFIMG
INTO CORRESPONDING FIELDS OF TABLE ITAB_LIPS_Z FROM LIPS
FOR ALL ENTRIES IN ITAB_LIPS_G
WHERE VBELN = ITAB_LIPS_G-VBELN.
SORT ITAB_LIPS_Z BY VBELN POSNR.
LOOP AT ITAB_LIPS_Z.
AT NEW VBELN.
CLEAR V_ZEILE.
ENDAT.
IF ITAB_LIPS_Z-LFIMG NE 0.
V_ZEILE = V_ZEILE + 1.
ENDIF.
ITAB_LIPS_Z-ZEILE = V_ZEILE.
MODIFY ITAB_LIPS_Z.
ENDLOOP.
ELSE.
V_DEL_ZERO = ' '.
ENDIF.
ENDIF.
SORT ITAB_LIPS_Z BY VBELN POSNR.
LOOP AT ITAB_LIPS.
IF V_DEL_ZERO = ' '.
ITAB_LIPS-ZEILE = ITAB_LIPS-POSNR.
ELSE.
CLEAR ITAB_LIPS_Z.
READ TABLE ITAB_LIPS_Z WITH KEY VBELN = ITAB_LIPS-VBELN
POSNR = ITAB_LIPS-POSNR BINARY SEARCH.
ITAB_LIPS-ZEILE = ITAB_LIPS_Z-ZEILE.
ENDIF.
MODIFY ITAB_LIPS.
ENDLOOP.
SORT ITAB_LIPS BY VBELN DESCENDING POSNR ASCENDING.
ENDFORM. " 220_PROCESS_DATA
*& Form 300_post_documents
FORM 300_POST_DOCUMENTS.
LOOP AT ITAB_LIPS_G.
PERFORM 310_POST_GR_DOC.
MODIFY ITAB_LIPS_G.
CLEAR ITAB_LIPS_G.
ENDLOOP.
CLEAR: BDCDATA, BDCDATA[].
ITAB_LIPS_R[] = ITAB_LIPS_G[].
ITAB_LIPS_G[] = ITAB_LIPS_X[].
LOOP AT ITAB_LIPS_G.
PERFORM 350_UPDATE_DELIVERY_DOC.
MODIFY ITAB_LIPS_G.
CLEAR ITAB_LIPS_G.
ENDLOOP.
PERFORM close_group.
ENDFORM. " 300_post_documents
*& Form 310_POST_GR_DOC
FORM 310_POST_GR_DOC.
PERFORM 320_POST_GR_HEADER.
LOOP AT ITAB_LIPS WHERE VBELN = ITAB_LIPS_G-VBELN
AND LFIMG NE 0
AND PROCQTY NE 0
AND ERRFA IS INITIAL
AND ERRFB IS INITIAL
AND ERRFC IS INITIAL
AND ERRFD IS INITIAL
AND ERRFE IS INITIAL
AND ERRFF IS INITIAL
AND ERRF1 IS INITIAL
AND ERRF2 IS INITIAL
AND ERRF5 IS INITIAL.
IF ITAB_LIPS-ZEILE EQ 1.
PERFORM 335_POST_GR_ITEMS.
ELSE.
PERFORM 330_POST_GR_ITEMS.
ENDIF.
ENDLOOP.
PERFORM 340_SAVE_GR_DOC.
ENDFORM. " 310_POST_GR_DOC
*& Form 320_POST_GR_HEADER
FORM 320_POST_GR_HEADER.
DATA: L_BLDAT TYPE SYDATUM,
L_BUDAT TYPE SYDATUM.
WRITE: ITAB_LIPS_G-BLDAT TO L_BLDAT,
ITAB_LIPS_G-BUDAT TO L_BUDAT.
IF ITAB_LIPS_G-IHREZ+0(10) NE '0000000000' AND
ITAB_LIPS_G-IHREZ+0(10) NE ' '.
WHILE ITAB_LIPS_G-IHREZ+0(1) EQ '0'.
SHIFT ITAB_LIPS_G-IHREZ.
ENDWHILE.
ENDIF.
perform bdc_dynpro using 'SAPMM07M' '0201'.
perform bdc_field using 'BDC_CURSOR'
'RM07M-VLIEF'.
perform bdc_field using 'BDC_OKCODE'
'/00'.
PERFORM BDC_FIELD USING 'MKPF-BKTXT'
ITAB_LIPS_G-IHREZ.
perform bdc_field using 'MKPF-BLDAT'
L_BLDAT.
perform bdc_field using 'MKPF-BUDAT'
L_BUDAT.
perform bdc_field using 'RM07M-BWARTWE'
'101'.
perform bdc_field using 'RM07M-WERKS'
perform bdc_field using 'RM07M-LGORT'
perform bdc_field using 'RM07M-XNUVO'
'X'.
perform bdc_field using 'XFULL'
perform bdc_field using 'RM07M-VLIEF'
ITAB_LIPS_G-VBELN.
perform bdc_dynpro using 'SAPMM07M' '0221'.
perform bdc_field using 'BDC_OKCODE'
'=SELN'.
perform bdc_dynpro using 'SAPMM07M' '0221'.
perform bdc_field using 'BDC_CURSOR'
'MSEG-ERFMG(01)'.
ENDFORM. " 320_POST_GR_HEADER
*& Form 330_POST_GR_ITEMS
FORM 330_POST_GR_ITEMS.
perform bdc_field using 'BDC_OKCODE'
'=KLA'.
perform bdc_dynpro using 'SAPMM07M' '1501'.
perform bdc_field using 'BDC_OKCODE'
'=OK'.
VV_ZEILE = ITAB_LIPS-ZEILE.
PERFORM BDC_FIELD USING 'RM07M-ZEILE'
VV_ZEILE.
perform bdc_dynpro using 'SAPMM07M' '0221'.
perform bdc_field using 'RM07M-XSELK(01)'
'X'.
VV_PROCQTY = ITAB_LIPS-PROCQTY.
perform bdc_field using 'MSEG-ERFMG(01)'
VV_PROCQTY.
perform bdc_field using 'MSEG-CHARG(01)'
ITAB_LIPS-CHARG.
perform bdc_field using 'MSEG-INSMK(01)'
'S'.
ENDFORM. " 330_POST_GR_ITEMS
*& Form 340_SAVE_GR_DOC
FORM 340_SAVE_GR_DOC.
perform bdc_field using 'BDC_OKCODE'
'=BU'.
CLEAR V_FAIL_IND.
PERFORM BDC_TRANSACTION USING 'MB0A'
CHANGING V_FAIL_IND.
ENDFORM. " 340_SAVE_GR_DOC
*& Form 350_UPDATE_DELIVERY_DOC
FORM 350_UPDATE_DELIVERY_DOC.
PERFORM 360_UPDATE_DELIVERY_HEADER.
LOOP AT ITAB_LIPS WHERE VBELN = ITAB_LIPS_G-VBELN
AND ERRFA IS INITIAL
AND ERRFB IS INITIAL
AND ERRFC IS INITIAL.
AND errfd IS INITIAL
AND errfe IS INITIAL.
PERFORM 370_UPDATE_DELIVERY_ITEMS.
ENDLOOP.
PERFORM 380_SAVE_DELIVERY_DOC.
ENDFORM. " 350_UPDATE_DELIVERY_DOC
*& Form 360_UPDATE_DELIVERY_HEADER
FORM 360_UPDATE_DELIVERY_HEADER.
perform bdc_dynpro using 'SAPMV50A' '0108'.
perform bdc_field using 'BDC_CURSOR'
'LIKP-VBELN'.
perform bdc_field using 'BDC_OKCODE'
'=UELA'.
perform bdc_field using 'LIKP-VBELN'
ITAB_LIPS_G-VBELN.
ENDFORM. " 360_UPDATE_DELIVERY_HEADER
*& Form 370_UPDATE_DELIVERY_ITEMS
FORM 370_UPDATE_DELIVERY_ITEMS.
IF ITAB_LIPS-ERRFD EQ 'X' OR
ITAB_LIPS-ERRFE EQ 'X' OR
ITAB_LIPS-ERRFF EQ 'X'.
ITAB_LIPS-NEWMFRGR = 'E'.
ENDIF.
perform bdc_dynpro using 'SAPMV50A' '0270'.
perform bdc_field using 'BDC_CURSOR'
'RV50A-VERUR_LA'.
perform bdc_field using 'BDC_OKCODE'
'=POPO'.
perform bdc_dynpro using 'SAPMV50A' '0111'.
perform bdc_field using 'BDC_CURSOR'
'RV50A-POSNR'.
perform bdc_field using 'BDC_OKCODE'
'=POPO'.
VV_POSNR = ITAB_LIPS-POSNR.
perform bdc_field using 'RV50A-POSNR'
VV_POSNR.
perform bdc_dynpro using 'SAPMV50A' '0270'.
perform bdc_field using 'BDC_CURSOR'
'LIPS-POSNR(01)'.
perform bdc_field using 'BDC_OKCODE'
'=LAPD'.
perform bdc_field using 'RV50A-LIPS_SELKZ(01)'
'X'.
perform bdc_dynpro using 'SAPMV50A' '0570'.
perform bdc_field using 'BDC_CURSOR'
'LIPS-MFRGR'.
perform bdc_field using 'BDC_OKCODE'
'=BACK'.
perform bdc_field using 'LIPS-MFRGR'
ITAB_LIPS-NEWMFRGR.
ENDFORM. " 370_UPDATE_DELIVERY_ITEMS
*& Form 380_SAVE_DELIVERY_DOC
FORM 380_SAVE_DELIVERY_DOC.
perform bdc_dynpro using 'SAPMV50A' '0270'.
perform bdc_field using 'BDC_CURSOR'
'RV50A-VERUR_LA'.
perform bdc_field using 'BDC_OKCODE'
'=SICH'.
If GR document is not posted successfully, then do not update the
status of delivery document
CLEAR V_FAIL_IND.
PERFORM BDC_TRANSACTION USING 'VL32'
CHANGING V_FAIL_IND.
IF V_FAIL_IND = 'X'.
CALL FUNCTION 'BDC_INSERT'
EXPORTING
TCODE = 'VL32'
TABLES
DYNPROTAB = BDCDATA.
REFRESH BDCDATA.
ENDIF.
ENDFORM. " 380_SAVE_DELIVERY_DOC
Start new transaction according to parameters *
FORM BDC_TRANSACTION USING TCODE
CHANGING V_FAILURE_IND.
DATA: L_MSTRING(480).
DATA: L_SUBRC LIKE SY-SUBRC.
REFRESH MESSTAB.
CALL TRANSACTION TCODE USING BDCDATA
MODE CTUMODE
UPDATE CUPDATE
MESSAGES INTO MESSTAB.
L_SUBRC = SY-SUBRC.
CLEAR V_FAILURE_IND.
IF L_SUBRC NE 0.
V_FAILURE_IND = 'X'.
CLEAR V_IND.
LOOP AT MESSTAB.
SELECT SINGLE * FROM T100 WHERE SPRSL = MESSTAB-MSGSPRA
AND ARBGB = MESSTAB-MSGID
AND MSGNR = MESSTAB-MSGNR.
IF SY-SUBRC = 0.
L_MSTRING = T100-TEXT.
IF L_MSTRING CS '&1'.
REPLACE '&1' WITH MESSTAB-MSGV1 INTO L_MSTRING.
REPLACE '&2' WITH MESSTAB-MSGV2 INTO L_MSTRING.
REPLACE '&3' WITH MESSTAB-MSGV3 INTO L_MSTRING.
REPLACE '&4' WITH MESSTAB-MSGV4 INTO L_MSTRING.
ELSE.
REPLACE '&' WITH MESSTAB-MSGV1 INTO L_MSTRING.
REPLACE '&' WITH MESSTAB-MSGV2 INTO L_MSTRING.
REPLACE '&' WITH MESSTAB-MSGV3 INTO L_MSTRING.
REPLACE '&' WITH MESSTAB-MSGV4 INTO L_MSTRING.
ENDIF.
CONDENSE L_MSTRING.
IF MESSTAB-MSGTYP = 'E'.
ERRORTAB-TCODE = TCODE.
ERRORTAB-VBELN = ITAB_LIPS_G-VBELN.
ERRORTAB-ERROR_TEXT = L_MSTRING.
APPEND ERRORTAB.
V_IND = 'X'.
ENDIF.
ELSE.
IF MESSTAB-MSGTYP = 'E'.
ERRORTAB-TCODE = TCODE.
ERRORTAB-VBELN = ITAB_LIPS_G-VBELN.
ERRORTAB-ERROR_TEXT = TEXT-U01.
APPEND ERRORTAB.
V_IND = 'X'.
ENDIF.
ENDIF.
ENDLOOP.
IF V_IND IS INITIAL.
ERRORTAB-TCODE = TCODE.
ERRORTAB-VBELN = ITAB_LIPS_G-VBELN.
ERRORTAB-ERROR_TEXT = TEXT-U01.
APPEND ERRORTAB.
ENDIF.
ELSE.
IF TCODE = 'MB0A'.
LOOP AT MESSTAB WHERE MSGTYP = 'S'
AND MSGID = 'M7'
AND MSGNR = '060'.
IF NOT MESSTAB-MSGV1 IS INITIAL.
ITAB_LIPS_G-MBLNR = MESSTAB-MSGV1.
ENDIF.
ENDLOOP.
ELSEIF TCODE = 'VL32'.
ITAB_LIPS_G-DLVIND = 'X'.
ENDIF.
ENDIF.
IF L_SUBRC <> 0 AND E_GROUP <> SPACE.
IF E_GROUP_OPENED = ' '.
CALL FUNCTION 'BDC_OPEN_GROUP'
EXPORTING
CLIENT = SY-MANDT
GROUP = E_GROUP
USER = E_USER
KEEP = E_KEEP
HOLDDATE = E_HDATE.
E_GROUP_OPENED = 'X'.
ENDIF.
CALL FUNCTION 'BDC_INSERT'
EXPORTING
TCODE = TCODE
TABLES
DYNPROTAB = BDCDATA.
ENDIF.
REFRESH BDCDATA.
ENDFORM.
*& Form 335_POST_GR_ITEMS
FORM 335_POST_GR_ITEMS.
VV_ZEILE = ITAB_LIPS-ZEILE.
perform bdc_field using 'RM07M-XSELK(01)'
'X'.
VV_PROCQTY = ITAB_LIPS-PROCQTY.
perform bdc_field using 'MSEG-ERFMG(01)'
VV_PROCQTY.
perform bdc_field using 'MSEG-CHARG(01)'
ITAB_LIPS-CHARG.
perform bdc_field using 'MSEG-INSMK(01)'
'S'.
ENDFORM. " 335_POST_GR_ITEMS
*& Form 399_RETRIEVE_DOCUMENTS
&----that is a warning message only ... But if you want to fix it then replace all 000 with 001 in your write statement. The position instead of 000 you have to give 001
write : /000(10)....instead of this
write : /1(10) or write : /(10) or write : /001(10) any thing you can use.
regards
shiba dutta -
How can I export an iMove Project if the Event file was deleted? (Missing Media error message)
Deep iMovie question:
I accidentally deleted various EVENT files from my iMove EVENTS folder. Yes, they are really gone ... this is NOT a matter of restoring them from the trash.
The projects are still there ... I can still watch the projects as long as I am in iMovie ... but if I try to export the Project I get the MISSING MEDIA error message.
Logic tells me that if I can view the project ... the file has to be SOMEWHERE inside my computer ... else I couldn't be watching it ... right? I mean what am I watching if not some file somewhere which has moving pictures stored in it?
So HOW do I get to something I can export? What am I watching when I watch the project?
I have iMove 08 on iMac with OS 10.6.8
Normally works great for my simple needs ... except if you move or delete an event file ...
Can anyone out there help?
thank you,
NatasyaIf you don't have the original files then I'm afriad you don't have anything to work with.
Regards
TD -
Capture Media error in javascript level
I am new in strobe media playback and OSMF. I notified that there should be calls in Flash for media error event (eventMaps[MediaErrorEvent.MEDIA_ERROR]). Could I retrieve the error ID, error message in javascript level, by adding listener in the callbacks of javascriptCallbackFunction, as similar as below
function onJavaScriptBridgeCreated(playerId) {
if (player == null) {
player = document.getElementById(playerId);
// Add event listeners that will update the
player.addEventListener("durationChange", "onDurationChange");
player.addEventListener("complete", "onCompleted");
player.addEventListener("mediaError", "onMediaError");
if it is right, what is the signatures for javascript function onMediaError? Thanks very muchThe OSMF/SMP player will toss error messages out to another JavaScript function by default - it looks for:
onMediaPlaybackError and if that function is present, it will pass the following 4 arguments:
(playerId, code, message, detail)
Listen for that and you will get all you need on any error.
Regards,
Rob -
The recording device reported the media error: Unknown device error. (0x0C,
Hello
I have a problem making a DUAL LAYER DVD, i have done anothers before. But now I can't burn it.
It's a message error.
(The recording device reported the media error: Unknown device error. (0x0C, 0x00.))
Next this my Mac configuration.
Model Name: Mac Pro
Model Identifier: MacPro3,1
Processor Name: Quad-Core Intel Xeon
Processor Speed: 3.2 GHz
Number Of Processors: 2
Total Number Of Cores: 8
L2 Cache (per processor): 12 MB
Memory: 6 GB
I have DVD STUDIO PRO 4.2.1, and in the log appears this:
Starting DVD Build UNTITLED_DISC...
Compiler Initializing...
Precompiling Project UNTITLED_DISC
Compiling VMG Information...
Created 6 PGCs in VTSM1
Created 8 PGCs in VMG.
0 Menu(s) will be created...
Compiling Menu PGCs...
Writing VTS010.VOB
Writing VIDEO_TS.VOB
1 VTSs and 1 Titles will be created...
Compiling VTS#1 (Track 1)...
Writing VTS010.VOB
Muxing VTS011.VOB
Done.
Linking VMG...
Linking VTS#1...
Writing VTS#1...
Writing VMG...
Writing Layout Info...
Compile Completed Successfully
Note: The file ‘UNTITLED_DISC.layout’ found in the ‘VIDEO_TS’ folder is not a DVD-Video file and will not be included in the final disc or DLT.
Note: The file ‘VOB_DATA.LAY’ found in the ‘VIDEO_TS’ folder is not a DVD-Video file and will not be included in the final disc or DLT.
Start formatting
Formatting as Standard DVD
Simulation mode is off
Lossless linking is on
Number of layers is 2
Doing opposite track path
Setting layer switch at sector 2053488.
Doing side 1 of 1
Playable in region 1,2,3,4,5,6,8
Disc size is 12 cm
Disc has no copyright material
Writing ISO 9660 directories
Writing UDF 1.02 structures
Writing files
The recording device reported the media error: Unknown device error. (0x0C, 0x00.)
What should be the problem?There could be a few reasons, a common one is bad DVDs or a burner going bad.
[Some threads discussing the error|http://discussions.apple.com/search.jspa?threadID=&q=Therecording+device+reported+the+media+error%3A+Unknown+device+error.+(0x0C%2C0x00.)&objID=f952&dateRange=all&userID=&numResults=15]
You can try the [arrpoach in this thread|http://discussions.apple.com/thread.jspa?messageID=2453295�] as s start.
Take a look at this
Not sure which brand of DVDs you are using, but [this guide rates brands|http://www.digitalfaq.com/reviews/dvd-media.htm]
Verbatim are usually good for me for DL. -
Premiere Pro - Insufficient Media error message for transitions
Keep getting Insufficient Media error message for transitions with premiere pro, can you help please?
You need to make handles before adding a transition.
Adobe Premiere Pro Help | Transition overview: applying transitions
Maybe you are looking for
-
So I have a solution to the problem but I wanted to check to see what everyone thought before I went out and spent money on a replacement part. A day or two ago my Audigy 2 NX (external sound card) just stoped getting power (it seems). All the lights
-
I don't know what sort of Ipod I have. It's got a long screen and a circular button at the bottom with menu play rewind and fastforward options. I just reset my IMac back to factory settings. I tried to log into my itunes but it keeps telling me I do
-
Periodically our 8.1.7.3 Oracle Database enters a "state" where a single process runs at 100 percent of one of our four cpu's. When this happens, I can not gain access to sqlplus to find out what sql is running or what is causing the problem. From se
-
When jobs are not posting it show error?
Hi All, We have requirement, when particular jobs are not posting(E-recruitment), it should give a warning message. Is it possible. If yes, Could you please advise. Regards BTM
-
Picture Network Shared Variable
Hi Everyone, I am having a lot of trouble to use the network published shared variable with a picture. I always receive the message Unable to locate the shared variable in the SVE, What is supposed to go into the chain \\<machine-name\<process>\<va