Muvo N200 download iss

hey I recently bought a Muvo N200 second hand. It was only the MP3, no software. So I was told that Windows Media Player works good for uploading songs on the MP3. It all works fine and dandy, BUT I cant seem to put my music into the specific files I create for the music. Anyone use Windows Media Player and/or know how I am able to put or upload the songs directly into the folder?

On the N200 you can have about 60 folders including the My Recorded Tracks and My Encoded Tracks folders. This is part of the Creative firmware. The only limitation with FAT is the number of files or folders in the root (top-level) folder. There is an explanation of this here. As long as you at least create a Music folder and put other folders inside this then you should be OK until you hit Creative's folder limit.
BTW, even without the installation CD you can get all of the Creative software from the N200 download page. This includes N200 Media Explorer and Creative MediaSource, which is a full PC Music Library program, similar to WMP. You need to use Media Explorer, CMS or WMP to transfer music you have downloaded from official music download sites - you can't just drag and drop those files using Windows Explorer.
PB

Similar Messages

  • PLEASE HELP MUVO N200 ERROR EVERY TIME I TRY AND DOWNLOAD A SONG

    hi every time i try and download a song it says error. i put it into recovery mode and it fixes it but i have to unload all the songs off and then start again but the same thing happens again and sometimes i don't even know if my player goes into recovery mode because my computer doesn't detect it. is there anything i can do about the error every time i try an ddownload a song? please help i am relly frustrated!!

    "Download" as in from LimeWire or some such program? Or loading your player with songs.
    If it's from LimeWire, the song file is probably corrupted.
    If it's loading your player with songs, either you haven't installed the player's corresponding driver correctly, or something's happened to corrupt your firmware.
    Try downloading the firmware from Creative and re-loading it onto your player. Very easy to do.
    If that doesn't fix anything, try uninstalling and then re-installing the Creative MuVo N200 driver onto your computer. Get somebody that <EM>really</EM> knows what they're doing to help you.

  • I really need help with my creative MuVo N200 mp3 pla

    i got my MuVo N200 mp3 player for chirtmas of last year, and it stopped working in 3 months. it used to shut off every few minutes and the mic doesnt work any more and i cant record music from the radio. right now it doesnt even work for a minute, it shuts off as soon as i try and turn it on. i emailed creative when it first started happening and they sent me a email saying what to do on there website, something about downloading something. i tryed it and it didnt work, im not sure if i didnt do it right. And right now i have no idea what to do. and creative won't help me unless i pay them money to fix it for me which im not about to do. has anyone have the same problem with the MuVo N200 mp3 player? what am i suppose to do to fix it's I still have there email telling me what to do, but i just dont get how to do it and if it will work. It only worked for me 3 months, and now im mad and thinking about buying a new one thats not from creative but i really want to try fixing it again to see if it will work. please help me.

    Good question, unfortunately I have absolutely no idea. Reflashing/-formatting generally takes care of the usual cases of wonkyness this player develops, and there isn't anything more drastic you as a user could do.
    Do you have a directory named "Recorded Tracks" on your player? Should be created automatically, but if it isn't you could try creating it manually...

  • Muvo N200 - What is it called

    Was going to update my MUVO N200 on the firmware, and am unable to find it. I see that Creative renamed everything (lovely), so I can't find my player on that list of drivers anymore. Anyone know what they renamed it to?
    And why do they pull this kind of stuff? Really, it just makes it more confusing for me as a consumer to figure out what I need.

    On the downloads page it may be called the MuVo Micro - it's full title is MuVo Micro N200 but that seems to get shortened to either MuVo Micro or N200 depending on which region you are in.
    It has been superceded by the Zen Nano Plus but don't use any downloads specifically for that player.
    PB

  • Muvo N200 not recognized by MediaSou

    I have a Muvo N200. I downloaded the latest media source software. At first it would not install because it could not find a creative player attached (even though it was). After much troubleshooting I discovered that the creative install program did not play nice if I had other USB devices attached (I have an external hard disk, external DVD burner and a card reader). Once I turned all the other USB devices off then it installed fine. However now that MediaSource is installed it tells me that I have no creative player attached. The player shows up as dri've F in windows and I can read and write to it fine. It also shows up in my old MediaSource software (shows up as Muvo). I have not updated the firmware for this player as I am some reluctant to take the risk that the player will stop working. I see lots of people have problems with firmware upgrades.
    Is there something I can do to get MediaSource to see my Muvo N200 player?Any help would be appreciated.

    I got my problem fixed. It turns out I also needed the appropriate plugin as well. I sort of assumed it would be all one package but trolling through the forum I found reference to their being different plugins depending on what unit you have. Installing the right plug in fixed the issue.

  • Muvo n200 cant get into recoverym

    hey all, i have a small problem, i have a muvo n200 gb witch when i change volume powers off. so i was sitting here looking around for a solution, and found that it might be a firmware problem, fine i downloaded the firmwaredownload thingy. and contected my player to the usb. what it asks for recovery mode!? how do i get in to that? some more hunting around and i found that i should power the player off remove the battery and hold the menu button in this case i think its the click wheel. but nothing happends and iwe tried for two hours now. could anyone help me cause i can't see any solution.
    best wishes Hampa

    i finaly got it to work. so please admin remove my posts. thank you.
    and greate products

  • Muvo N200 not working.. any ide

    I have a Creative Muvo N200 for about a year now. Just recently it started having problems. Whenever I turn it on it shows the startup logo and then turns off immediately. I've tried deleting all the files on it and that worked for a little bit but then it went back to having this same problem. I tried putting it in recovery mode but I'm really not sure if I did this right because when I tried to download the firmware it, sometimes it said it couldn't detect the player and sometimes it said the player wasn't in recovery mode. Does anyone know of anything else I can do? Or can someone explain how exactly to put it in recovery mode? Maybe I'm doing that wrong, I don't know. Thanks for any ideas.

    The full instructions for Recovery Mode are in the sticky thread. PBMessage Edited by PeeBee on -25-200604:50 PM

  • Muvo N200 auto-resume?? (for audio boo

    Greetings,
    Does the Muvo N200 automatically resume playback from where it left off after power off? How about after changing the battery? I'm planning on using the N200 for audio books, so the resume feature is very important.
    Any other comments on using the N200 for audio books?
    Thanks in advance...

    After considerable research, I have figured out the problem, re: RESUME on the N200. Evidently, the problem is with Audible Files. 90 percent of the Audible files I have downloaded have retained the RESUME function; but two recent files did not. That may be Audible's fault, or it may flow from disconnecting the USB too soon--before the file transfer is complete.
    I confirfmed this by testing other Audible files where the RESUME function worked; and on MP3 and WMA files, where RESUME also worked without a hitch.
    Hope this hel
    ps.
    jb

  • Muvo n200 freez

    hello
    my creative muvo n200 keeps freezing on me at the n200 screen. I have tried taking the battery out and replacing it but that does not work.
    I have attempted to download the new firmware onto it but it says to start my player in recovery mode before completing the install. What is recovery mode?
    Also when I attempt to safely remove my player, it says the generic volume cannot be stopped right now. please try again later.
    someone please help me with these problems.
    many thanks
    lee

    Lee,
    The steps to put the player into recovery mode are outline in the firmware downloaded page. Check this out and look under the Notes section.
    Jason

  • MuVo N200 - help me, its de

    I have a MuVo N200 player (28) and I used it for 6 months with no problem. Then my PC was formatted and before I reinstalled the software, I connected the player. After that it stopped working and when I connect it to the USB port, it just shows some display that it is connected.
    Net I tried re-installing the software, but strangely the driver is not getting installed and now the device is also not gettign detected on the PC.
    Even tried Device Manager but it shows no driver installed. I downloaded the following drivers from the internet but nothing happens as the player is not getting detected:
    MuVoN200_PCFW_LF__20_04.exe
    MuVoN200_PCFW_L4__5_0.exe
    MuVoN200_PCFW_LB___0.exe
    What do I do? Pls help!

    Please download the recovery mode driver and install it first:
    http://uk.europe.creative.com/support/downloads/download2.asp?MainCategory=23&Product=0&dlcentric= 7954&Product_Name=MuVo+Micro+N200&OSName=Windows+X P
    Now, remove the battery from your player. With the battery removed, hold down the Play button and connect the USB cable. Wait for Windows XP to detect your unit. It will take longer then usual, and the device will most likely have a STMP or STAC name right now. Let go of the Play button.
    Install the firmware update:
    http://uk.europe.creative.com/support/downloads/download2.asp?MainCategory=23&Product=0737&dlcentr ic=947&Product_Name=MuVo+Micro+N200&OSName=Windows +XP
    Be sure to tick "Format Data Area". Due to flash memory corruption, your music was already lost before you started. It is likely that you will receive a warning that the flash memory is not initialised. Accept it and continue.
    Once this process completes (the Close button will become acti've), you still need to format your MuVo dri've in FAT32.
    If you receive any error messages, be sure to write them down.
    If this procedure does not make the N200 usable, you will need to contact customer support and ask for an RMA. Feel free to describe that you have tried a firmware upgrade in recovery mode. They will want to know what error messages you received in this process.
    Note that the RMA procedure only applies if the unit is less then 2 months old.

  • Muvo n200 not working

    HELP! My muvo n200 player simply turned off. When I turn the power on, it begins to start of, but dies again before a song gets a chance to play. I already considered that the battery may be out but I replaced the batteries about 3 times to make sure the batteries weren't the old ones.. i also reformated & deleted & change my mp3's knowing maybe my files were corupt but the problem is still there.. Can somebody please help! tnxs...

    mayar wrote:
    I have the same problem, what firmware update do i need? The only one I can find on the web site seems to be for viewing Thai characters only...
    That is just the fix in the latest firmware - it does verything that the earlier firmwares did as well.
    I would try version .2.0 first - it is not available on the Download page but you can still get it here.
    PB

  • My MuVo N200 WONT WORK!!!!HELP PLEASE!!! DESPERT LOUISIANAN IN KNEED OF AN AN

    MY MuVo N200 wont work it turns itself off after the creative logo Ccomes up. I have new batteries upbaterd the softwair filmware and reformater durt that diden't work!!!!!
    I had no AC OR power for adout a mounth I li've in Mandeville Louisians in SST. TAMMANY PARISH the MP3 PLAYER MoVo N200 stayed in the heat for about a mounth with no power or ac in the housre because katrina knocked thepower out could my MuVo N200 52 MB not take the heat of the day that it just stoped working and got so to speaked fried in the heat!
    I would like to get my MuVo N200 52 MB fixed soon and some ancers on why it wont work when i reformated it , did the latest film ware, and the latest software up dates. this is comming from a desperat louisianian and LSU FAN PLEASE HELP ME AND AS soon as possible please!!!!!!!!!!!!!!!!
    Thanks
    Mistery_Girl

    Have you tried reloading the firmware? Make sure to follow the instructions at the download page.

  • Muvo n200 microphone and echo probl

    hi, can anyone help me to slove my muvo n200 problem? My mp3 player is in .0.2 version, I bought it for 5 months till now, the microphone recording function suddenly don't work and whenever I press it it shut down the whole system.
    The second problem is just started the day before yesterday. The sound (not because of the headphone) was not right. It sound metalic and have heavy metal econ. However it only happen when I start up it for the first time in a day. After that it will be fine. I really don't know why. Should I recovery the whole system? Or I have to download something to replace it's
    Thank you very much.

    Tried reloading/updating the firmware?

  • MuVo N200 wont play please help !

    Two days ago my player was working just fine, but as of yester day it wasn't.
    as i turn it on, the creative screen comes on then it seems to freeze on the MuVo N200 screen with no Music at all !
    I have taken out the battery more times than i care to count but it still wont work. I haven't droped it or damaged it in any kind if way so why wont it work.

    From the FAQ post:
    <IMG height= alt="" src="http://forums.americas.creative.com/i/p.gif" width= border=0>
    My MuVo is not working properly, what can I do?
    The first thing to try with a misbehaving MuVo is to update the firmware. Get the latest version from Nomadworld.com downloads and make sure to follow the instructions exactly that are accessed from <EM>show details </EM>at the download page.

  • MuVo N200 Direct Trans

    Hi, I have an old(er) MuVo N200 256mb mp3 player and my friend has a video ipod. He is having a problem downloading a particular album that he wants that I have on my player, so he's asked if it's possible to directly transfer. I suggested e-mailing it but he seems to think that'd take longer if it can be done directly. I know the N200 has this fancy cord for encoding as well as the USB port, so is it possible to do this transfer simply by connecting our players together? And if so would we use the encoding cord or the usb cord? If I had to guess I'm betting either this can't be done or I would connect it to his using the USB which would cause his ipod to recognize it as a portable dri've, make sense? If anyone could get back to me ASAP that'd be wonderful, thanks -Ang-

    Ang,
    You're right, this cannot work. You need to attach both player to the computer to make those transfer.
    Jason

Maybe you are looking for